Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

+32-486-808080 Contact Us

  • New Arrivals

  • On sale

More...
  • Pixhawk Original I2C Splitter JST GH 4 Pin

    Pixhawk Original I2C Splitter JST GH 4 Pin

    Pixhawk Original I2C Splitter JST GH 4 Pin

    • I2C Splitter with 6 ports
    • 4 pin JST GH connectors for Pixhawk 2.1 and modern autopilots

    Includes:

    • 1 x I2C Splitter
    • 1 x Cable
    SKU: HEX-02-05-I2C-Splitter
    €10.90
    inc. VAT

     LOW STOCK
  • TATTU 10000MAH 22.2V 25C 6S1P Lipo Battery Pack

    TATTU 10000MAH 22.2V 25C 6S1P Lipo Battery Pack

    Tattu 10000MAH 22.2V 25C 6S1P LIPO battery pack is suitable for Alta 8, DJI S800, S800 EVO, S1000, CineStar 6, XL HexaCopter and other full-size multirotors.

    • Product Type:lipo battery pack
    • Capacity: 10000mAh
    • Voltage: 22.2V
    • Max Continuous Discharge: 25C (250A)
    • Max Burst Discharge: 50C (500A)
    • Weight: 1386g
    • Dimensions: 174x62x53mm
    • Balance Plug: JST-XH
    • Discharge Plug: AS150/XT150
    • Charge Rate: 1-3C Recommended, 5C Max
    •  

     

    SKU: TA-25C-10000-6S
    €220.00
    inc. VAT

     IN STOCK
  • Gens ace 2500mAh 11.1V 25C 3S1P Lipo Battery Pack with T-plug

    Gens ace 2500mAh 11.1V 25C 3S1P Lipo Battery Pack with T-plug

    Gens ace lipo 2500mAh 3S1P 25C lipo battery pack has Remarkable stacking technology which enables single cell capacities of 2500mAh. With High discharge performance and high energy density, Gens ace batteries provide high quality, reliable power for RC model.
    Gens ace 2500mAh 11.1V 25C 3S1P Lipo Battery Pack Specs:

    • Capacity: 2500mAh
    • Voltage: 11.1V (3s)
    • Max Continuous Discharge: 25C
    • Max Burst Discharge: 50C
    • Weight: 237.2g
    • Dimensions: 136*43*20mm
    • Charge Rate: 1-3C Recommended, 5C Max
    SKU: B-25C-2500-3S1P
    €29.90
    inc. VAT

     LOW STOCK
  • ZEAL Energy Carbon Fiber Main Blades 550mm (Neon Orange)

    ZEAL Energy Carbon Fiber Main Blades 550mm (Neon Orange)

    With a passion for cutting edge performance, Zeal rotor blades define the intensity you feel with RC helicopter flight, unlocking the drive to push harder, faster & lower.
    Constructed of the highest quality carbon fiber layup, Zeal rotor blades are optimized for modern day RC helicopter performance, designed & ready to be pushed like no other blade on the market today.
    Balanced with an optimal center of gravity, and coalescing symmetrical airfoil technology chosen for maximum levels of rotor performance, Zeal rotor blades were brought forth to suit the demands of those in search of the extremes.
    With Zeal rotor blades, quality & composition can be seen, felt & heard - a quality that is synonymous with the passion behind the performance. Composed of true carbon fiber construction, these light weight rotor blades were designed for maximum agility & performance, providing rapid control inputs with crisp response capability.
    Outfitted to perform, and constructed with the rigors of modern day flybarless technology, Zeal rotor blades allow any pilot to choose a blade that will add that extra element of intensity, providing a flight that will not soon be forgotten.

    Features:

    • High Quality Carbon Fiber Construction
    • Light Weight with High Strength
    • Optimized Airfoil Design for Maximum Performance
    • Multiple Size Ranges Available
    • Factory Balanced with Optimized Center of Gravity
    • High Agility Design

    Includes:

    • (1) Set of Main Rotor Blades
    • (4) pcs x 1mm washers

    Specifications:

    • Material: Carbon Fiber
    • Length: 550mm
    • Chord width: 50mm
    • Root thickness: 10mm
    • Hole Diameter (Bolt): 4mm
    • Weight: approx 116g (single blade)

     

    SKU: ZHM-NRG550
    €65.00
    inc. VAT

     LOW STOCK
  • Align B6M 2-In-1 Voltage Regulator & Glow Ignitor COMBO set

    Align B6M 2-In-1 Voltage Regulator & Glow Ignitor COMBO set

    The Align 2-in-1 Voltage Regulator and Glow Ignitor combo features a special greaseproof/waterproof design, much reduce damages caused by fuel and water infiltration. Additionally an added filter capacitor for high frequency interference, to efficiently reduce the outside interferences(ex. High speed/torque servos).

    Due to the unique 2 in 1 design, the regulator’s functions provide power to the receiver, servos, and the internal glow plug ignition system that does not require you to remove the clip lead.

    The linear regulator design results in no interference to the receiver. The required input power may only consist of a 2 cell Li-ion or a Li-Poly battery.

    When the integrated power switch is moved to the on position, the voltage indicating LED’s and ignition indicating LED’s will illuminate displaying the status of the battery voltage, and of the plug ignition function.

    Specifications:

    • Input voltage: DC 7.4V 2s Lithium battery
    • Output voltage: 6A 7.4V (For receiver/servo) & 5A 1.5V(For Glow plug)
    • Max. continuous current: 6A
    • Regulator size: 73x32.5x13mm
    • Control board size: 35x24x10mm
    • Weight: 51.2g (including wire set)
    SKU: HEBB6M01T
    €55.00
    inc. VAT

     IN STOCK
  • RCPROPLUS Battery Safety Cap w/Flag S7 ,set of 4 pcs

    RCPROPLUS Battery Safety Cap w/Flag S7 ,set of 4 pcs

    RCPROPLUS Battery Safety Cap w/Flag S7 ,set of 4 pcs
    SKU: RCA1978F
    €17.90
    inc. VAT

     IN STOCK
  • RCPROPLUS Battery Safety Cap Pro S7 set of 8pcs

    RCPROPLUS Battery Safety Cap Pro S7 set of 8pcs

    RCPROPLUS Battery Safety Cap Pro S7 set of 8pcs
    SKU: RCA1978
    €17.99
    inc. VAT

     IN STOCK
  • RCPROPLUS Battery Safety Cap w/Flag Pro D5/S5 set of 4PCS

    RCPROPLUS Battery Safety Cap w/Flag Pro D5/S5 set of 4PCS

    RCPROPLUS Battery Safety Cap w/Flag Pro D5/S5 4PCS
    SKU: RCA1958F
    €16.90
    inc. VAT

     IN STOCK
  • RCPROPLUS Battery Safety Cap Pro D5/S5 set of 8pcs

    RCPROPLUS Battery Safety Cap Pro D5/S5 set of 8pcs

    RCPROPLUS Battery Safety Cap Pro D5/S5 SET OF 8 PCS
    SKU: RCA1958
    €16.90
    inc. VAT

     IN STOCK
  • RCPROPLUS Pro D6 & S6 Connector Safety Cap, set of 8

    RCPROPLUS Pro D6 & S6 Connector Safety Cap, set of 8

    RCPROPLUS Pro D6 & S6 Connector Safety Cap, set of 8
    SKU: RCA1968
    €19.90
    inc. VAT

     IN STOCK
  • Elan-tech ADH 971.961 Epoxy adhesive for UAV/Drones 50Ml

    Elan-tech ADH 971.961 Epoxy adhesive for UAV/Drones 50Ml

    The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

    • Color: Black
    • Filing gap- up to 20mm
    • Bonding time: 15 min
    • Curing time: 150 min
    • Pack of 50ml, with 1 mixing tube

    Bonding gun (Dispence gun) Not included

     

     

    SKU: ADH971961
    €19.49
    inc. VAT

     IN STOCK
  • Elan-tech ADH 141.242 Epoxy adhesive for UAV/Drones 50Ml

    Elan-tech ADH 141.242 Epoxy adhesive for UAV/Drones 50Ml

    The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

    • Color: colorless
    • Filing gap- up to 10mm
    • Bonding time: 5 min
    • Curing time: 140 min
    • Pack of 50ml, with 1 mixing tube

    Bonding gun (Dispence gun) Not included

     

     

    SKU: ADH141242
    €19.49
    inc. VAT

     IN STOCK
  • Elan-tech ADH 891.892 Epoxy adhesive for UAV/Drones 50Ml

    Elan-tech ADH 891.892 Epoxy adhesive for UAV/Drones 50Ml

    The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

    • Color: Black
    • Filing gap- up to 8mm
    • Bonding time: 65 min
    • Curing time: 210 min
    • Pack of 50ml, with 1 mixing tube

    Bonding gun (Dispence gun) Not included

     

     

    SKU: ADH891892
    €19.49
    inc. VAT

     IN STOCK
  • Elan-tech ADH 98.98 Epoxy adhesive for UAV/Drones 50Ml

    Elan-tech ADH 98.98 Epoxy adhesive for UAV/Drones 50Ml

    The variety of adhesives we can provide offer a high strength structural bond for a wide range of application such as Automotive, Wind Energy, Marine and Aerospace. Cristex adhesives offer outstanding performance in numerous composite bonding applications providing consistently high quality. These are available in various drum sizes and cartridge applicators that provide a perfect mix.

    • Color: Biege
    • Filing gap- up to 10mm
    • Bonding time: 25 min
    • Curing time: 100 min
    • Pack of 50ml, with 1 mixing tube

    Bonding gun (Dispence gun) Not included

     

     

    SKU: ADH9898
    €19.49
    inc. VAT

     IN STOCK
  • Manual Dispensing Gun, 50 mL

    Manual Dispensing Gun, 50 mL

    DMA51-00-10 is a black/gray manual dispenser. It is designed for use with 50 ml cartridges and will work with 1:2 mix ratio products.

     

    SKU: DMA51-00-10
    €26.00
    inc. VAT

     LOW STOCK
  • Iflight SucceX Micro F4 V2.1 15A 24S Flight Tower System 16x16mm

    Iflight SucceX Micro F4 V2.1 15A 24S Flight Tower System 16x16mm

    iFlight SucceX Micro F4 V2.1 15A 24S Flight Tower System 16x16mm

    SucceX F4 Flight Controller:

    • STM32F411
    • Input voltage 24S LIPO
    • Gyro: MPU6000
    • 2x UART ports
    • 4x motor outputs
    • OSD inbuilt
    • Blackbox FLASH
    • BEC 5V 3A cont.
    • Size: 21mm*21mm
    • Mounting holes distance: 16*16mm
    • Weight: 2.5g
    • BF target : STM32F411

    SucceX Micro 12A Brushless ESC:

    • Firmware: GH30 BLS 16.7
    • Input voltage : 2-4S LIPO
    • Continuous current: 12A
    • MCU: BB21F16G
    • BEC: None
    • ESC protocol: pwm, oneshot125, multishot, dshot150, 300, 600, etc.
    • Size: 23mm*21mm
    • Mounting hole 16*16mm
    • Weight: 2.7g

    SucceX Micro VTX:

    • Power: PIT/25/100/200mW
    • Antenna interface: IPEX (UFL)
    • Telemetry: IRC Tramp
    • Size: 17mm*27mm
    • Mounting holes: 16*16mm
    • Weight: 1.6g

    Package Included:

    • 1 x SucceX F4 Flight controller (M3 hole)
    • 1 x 12A Brushless ESC (M3 hole)
    • 1 x PIT/25/100/200mW VTX (M3 hole)
    SKU: FC06873
    €49.00
    inc. VAT

     LOW STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

     LOW STOCK
    SALE
  • Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC HV 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controler ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

     LOW STOCK
    SALE
  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €299.00
    inc. VAT

     LOW STOCK
    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesnt qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

     72HR STOCK
    SALE
  • Wooden Blades 550 mm

    Wooden Blades 550 mm

    Low cost, and yet excellent product for Beginner and for Aerobatic practicing.
    Durable blades, made for 3-4 layers of quality wood, will deliver excellent performance without making holes in the pocket.

    Fits all 30-50 (550)size helis, length 550mm

    SKU: RCWB-550
    €10.00 €26.00
    inc. VAT

    SALE

Manufacturers

Latest Video

RC Market