Designed and built upon the successful foundation laid by its predecessor, the NEW i4 is a charger featuring state of the art design and functionalities. It is designed to work immaculately with a large variety of rechargeable batteries, and is capable of charging 4 batteries simultaneously. With its accelerated charging rate up to 1.5A, fully charging large capacity batteries will no longer be a dreadful process. The ingenious Active Current Distribution (ACD) technology allows the NEW i4 to bring the entire charging process to an orderly manner depending on user preferences. The new technologies incorporated allows it to distinguish non-rechargeable batteries from rechargeable ones, and the NEW i4 adopts the appropriate charging mode for different battery types and capacities. Users may also configure its settings to suit their individual needs. Four independent indicators provide real time feedback on battery status.
Product Highlights:
4 Bay Charger
Multiple charging speeds - .375A x 4, .5A x 2, .75A x 2, or 1.5A x 1
LEDs show the charging status of each cell
Automatically turns off when charging is complete
Reverse polarity protection protects if cell is entered in the wrong way
Packaging Contents:
Nitecore i4 Intellicharger
Standard EU Power Cable
User Manual
Additional Features:
Active Current Distribution (ACD) Technology
Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries
Charging program optimized for IMR batteries
Automatic current selection based on battery capacity
Automatic detection of non-rechargeable Lithium batteries
Terminating threshold for battery voltages and charging current can be set independently for each slot
Capable of charging four batteries simultaneously
Automatic adoption between three charging modes (CC, CV, and dV/dt)
Automatically detects battery power status and displays charging progress
Automatically stops charging upon charging completion
Reverse polarity protection and short circuit prevention
Over-discharged battery recovery
Overtime charging protection
Designed for optimal heat dissipation
Made from fire resistant, flame retardant PC material
Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to USB-C android devices when flying to view and transfer the real time video / images
The usb-c is to plug in the controller, and other side to android device.
The Cable outer is make of nylon braided protection, which is very dural and anti-pull.
90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
Its length is +-30cm, which is the perfect length for controller to cellphone / tablet
Connector: USB-C to USB-C (Android devices and others)
Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom
Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to iPhone / iPad when flying to view and transfer the real time video / images
The usb-c is to plug in the controller, and the lighning end is used with iPhone /Tablet, it support IOS 7,8,9,10, fit for iPhone X / 8 / 7 / 7/ 6 / 5 / SE, iPad / iPad Air / iPad Mini and etc
The Cable outer is make of nylon braided protection, which is very dural and anti-pull.
90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
Its length is +-30cm, which is the perfect length for controller to cellphone / tablet
Connector: USB-C to Lightning ( for iPhone / iPad )
Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom
These carbon fibre tail fins for the RAPTOR 60-90 are available in solid and cut-out 3D styles.
CNC machined from highest quality multi laminated carbon composite. Lightweight and strong!
The Pixhawk Cube Orange (ADS-B Carrier Board) is integrated in the new ADS-B carrier board. The autopilot equipped with the new unmanned aerial vehicle system can receive information about the location of manned aircraft in the area.
The DJI FPV - Air Unit module is at the heart of the HD digital transmission system developed by DJI. Composed of a main module that acts as a radio receiver and video transmitter, a camera and a coaxial cable, the Air Unit is installed on your UAV. Compact and adapted to the standards of the UAV racer, it will be fixed very simply with the supplied screws.
The video transmitter has a low latency of 28ms for comfortable and precise steering. The announced range of 700m in CE standard allows you to make freestyle flights without interference. The video return is made in HD 720p at 120 fps for a perfect quality and therefore a safe piloting.
The camera records your flights in 1080p at 60fps to make fast and dynamic aerial shots. A microSD card must be inserted in the camera, not exceeding 128GB.
DJI FPV Remote Controller
With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit.
FEATURES
Parameters can be set remotely.
Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver.
7ms ultra-low latency.
Remote Controller
Weight: 765 g
Operation Frequency: 5.725-5.850 GHz
Max. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km; CE: 0.7 km
Transmitter Power (EIRP): FCC: <30 dBm; CE: <14dBm; SRRC:<19dBm
Operation Current/Voltage: 0.6 A @ 7.6 V
Operation Temperature: 0° to 40°C (32° to 104°F)
Charging Temperature: 5° to 40°C (41° to 104°F)
Remote Controller Intelligent Battery
Battery Type: LiPo 2S
Capacity: 4920 mAh
Voltage: 7.6 V
Energy: 37.39 Wh
Quick Release Canopy system mount features a custom locking push/pull pin design made to fit your Helicopter
Standoff is made from 6061-T6 Aluminum ,Silver Anodized
Quick Release pin is made from all stainless steel construction and is designed to stay connected to the canopy when not in use
Kit Includes:
Quick Release Pin x 2
Quick Release Standoff x 2
Preinstalled Grommets x 2
ABS standoff 3mm x 2
ABS standoff 5mm x 2
ABS standoff 6mm x 2
ABS standoff 8mm x 2
Screws M3 x 2
Standoff length is 30mm, supplied ABS spacers allow to adapt to different lengths.
NOTE: Use of this kit required you to increase the canopy mounting hole
The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
Agile is agility AND quality, you can’t go wrong!
Required to fly:
Main Blades: 550mm
Tail Blades: 85mm-95mm
Motor: 1100-1200Kv
ESC: 90A-120A / 6s
3x Cyclic servos
1x Rudder servos
Flybarless System- Microbeast included
1x Lipo 5000 6S 45C
Transmitter and receiver
Specifications:
Length: 1120mm
Height: 350mm
Width: 176mm
Main Rotor Diameter: 1250mm
Main Blade Length: 550mm
Tail Rotor Diameter: 260mm
Tail Blade Length:92mm
Motor Pinion Gear: 21T
Motor KV: 1100KV
Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
Due the bad storage conditions in one of our warehouses, some of our bags got dirty. there is Absolutely no damage to zipper or material, its pure something can be washed.
We want you to benefit from it, so we offer the bags at Very special discount. Bear in mind its a limited offer.
Each bag is guarantied and will be checked again before shipping.
See choice of sizes.
Some of models can be delivered in RED-YELLOW-BLACK, or BLUE-YELLOW-BLACK, we can not guaranty the color, but in most cases it will be RED-YELLOW-BLACK
Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatible with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required.
Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.
Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!
Included items of this special offer:
Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:
Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!
Included items of this special offer:
Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!
Included items of this special offer:
Sky-Hero Spyder 700 Kit (SKH00-401)
ABS Painted Canopy
2x Red Color LED Lights (ALULED-016R)
2x White Color LED Lights (ALULED-016)
2x High Fluorescent Stickers (SKU46635)
10% saving coupon for your next order (coupon's details will be sent with the order)
Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!
Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!