Your Best Source for R/C Helicopters,Drones,FPV,Multicopters,Aerial photography

+32-486-808080 Contact Us

  • New Arrivals

  • On sale

More...
  • KST X20-1035 HV Tail Brushless Servo - 12Kg.cm 0.03s 70g 20mm

    KST X20-1035 HV Tail Brushless Servo - 12Kg.cm 0.03s 70g 20mm

    KST X20-1035 HV Brushless Servo - 12Kg.cm 0.03s 70g 20mm

    The developers at KST ensured nothing but the best components were utilized during construction of this servo, components as large as motors and gears, materials for the servo case,and small components such as the PCB board driving the motor. EMF currents in common DC voltage applications can generate large EMF spikes under operation, which can wreak havoc on other connected electronics. X20 servos feature a PCB board which minimizes EMF spikes, protecting other electronics from having to filter out the noise.  

    Features:

    Standard size aluminum case
    Low EMF design
    Full metal gears
    Dual ball bearings
    HV compatible

    It is an amazingly fast yet powerful and precise metal cased high voltage servo designed to be run directly from a 2S LiPo without needing a regulator.

    KST also advise unlike any other servo, the X20 generates no counter EMF in any working conditions. It has an all-new design of circuit board, so your heli flybarless system and receiver will not be interfered with and will not display any weird behavior as a result.

    The KST X20-1035 HV is approx standard size and has an output spline the same as similar Futaba servos, so many compatible output arms are available. Wirh an incredible 0.030 sec/60° speed and impressive 12 kg.cm torque the KST X20-1035 is appropriate for all fast large gliders, jets and helicopters on surfaces requiring very high speed response. This servo is also perfect for the tail rotor on 550 - 700 class helicopters.

    In addition to the four heavy duty plasic output arms, which are similar to futaba 25T splines, the servo is supplied with two attractive red annodised aluminium arms with M2 threaded holes.

    The extreme reliability and performance of these servos also makes them very suitable for use in film and motion picture industry special effect departments. They are also used in robotic, drone, UAV, UAS, academic research, military, and other highly demanding applications.

    Specification:

    • Body dimensions: 40.5 x 20.2 x 36.3 mm
    • Stall torque (6V): 8.5 kg.cm     118 oz.in
    • Stall torque (7.4V): 10.3 kg.cm     143 oz.in
    • Stall torque (8.4V): 12 kg.cm     167 oz.in
    • Weight:    70 g     2.47 oz
    • Lead length: 31 cm     12.3 in
    • Operating speed (6V):    0.040 sec/60°
    • Operating speed (7.4V):    0.035 sec/60°
    • Operating speed (8.4V):    0.030 sec/60°
    • Operating voltage: 6.0V to 8.4V
    • Bearings: 2 ball bearing
    • Gear material:    Metal
    • Case material:     Metal
    • Motor type: Brushless
    • Working frequency: 560 Hz
    • Pulse width:  900 - 2100 µs
    • Digital: Yes
    • Programmable: No

     

    SKU: KST-X20-1035
    €139.00
    inc. VAT

     IN STOCK
  • Optipower ULTRA-GUARD 430 Back Up Solution Combo OPRUS2S

    Optipower ULTRA-GUARD 430 Back Up Solution Combo OPRUS2S

    OPTIFUEL is building a highly respected reputation for developing products and accessories for the model enthusiast which now covers brands such as OPTIPOWER Ultra Guard 430 a new intelligent concept in model flight safety.

    ULTRA GUARD 430 is a small lightweight easy to install smart landing system designed to restore total backup control allowing you to land your model safely following a main power failure. A welcome new development and additional safeguard is the easy to fit Ultra Guard high intensity LED Flash Alarm..

    The device is plugged into a free port on your RX or FBL system and when you power up the device waits, monitors the system set voltage, then arms at that voltage less 0.5V. The device is then armed and monitoring the system voltage and the state of the buffer pack.
    If the buffer pack needs topping up it will do that and balance it from the main packs or RX pack and stop when it gets to a nominal 8.1V. The device samples the system voltage every 2mS and if the system voltage drops below the armed set voltage then the buffer pack steps in if the system voltage recovers it drops out, this is seamless. The device when working can and does indicate locally that its operational and if it is charging or not but this is not able to be seen at distance.
    A separate external high intensity LED can be fitted that shows you are on the buffer pack, this is an option and these can be cascaded if required. The device works across 4.6V to 8V.
    The combo version (the board and buffer pack) are bound together by clear shrink wrap as is the super combo version (inc LED system).
    The total weight is <39g inc LED <35g ex the LED. All parts can be purchased separately. The device can go to storage charge if its not going to be used for some time.

    Benefits & Features

    • Voltage Sensing 2 - 8.2V
    • Charges and balances at upto 2C in flight
    • Universal JR connector
    • JST-XH balance connection to main board
    • LED onboard status
    • External LED not included
    • Storage charge function
    • 5A continuous & 10A peak rated intermittent
    • Total wright just 40 grams
    • Vibration proof flexi board
    • Automotive industry quality components
    • Manufactured in Europe
    SKU: OPRUS2S
    €39.90
    inc. VAT

     IN STOCK
  • Frsky Taranis X9D Plus SE 2019 Version EU-LBT 24CH OpenTX Transmitter Carbon

    Frsky Taranis X9D Plus SE 2019 Version EU-LBT 24CH OpenTX Transmitter Carbon

    The FrSky Taranis X9D Plus 2019 is a redesigned version with additions like an additional momentary button placed on the top left shoulder making it ergonomically friendly for DLG pilots to activate launch mode, and features a program scroll wheel making it even easier to navigate the menus. The upgraded MCU is used in conjunction with a redesigned mainboard that further increases the computing capability and increases the data storage. The upgrades not only improve the running of LUA scripts, it also optimizes overall performance like voice speech outputs.

    The 2019 version uses the latest ACCESS communication protocol, it boasts 24 channels with a faster baud rate and lower latency with a highspeed module digital interface. Along with the new spectrum analysis function added to the OpenTX firmware, it is now possible to check the airwaves for RF noise. This version will give you a further improved experience based on the classic Taranis remote control. Additionally, tons of extra upcoming features that ACCESS brings will make this an ideal transmitter for any skill level.

    The SE 2019 version is installed with the upgraded switches and M9 hall sensor gimbals and features the addition of a PARA wireless trainer function which makes them compatible with the FrSky Free Link App and AirLink S.

    Main Features:

    • Classic Taranis form factor design
    • Easy launch momentary button
    • Program navigation button
    • Highspeed module digital interface
    • Installed with ACCESS protocol
    • Supports spectrum analyzer function
    • Supports SWR indicator warning
    • Haptic vibration alerts and voice speech outputs
    • Supports wired training function
    • Supports PARA wireless training function
    • Compatible with FrSky Free Link App and AirLink S via mobile devices
    • M9 hall sensor gimbal and upgraded switches

    Specifications:

    • Dimension: 200*194*110mm (L*W*H)
    • Weight: 700g (without battery)
    • Operating system: OpenTX
    • Number of channels: 24 channels
    • Internal RF module: ISRMSX9
    • Operating voltage range: 6.5 – 8.4V
    • Operating current: 130mA@8.2V (Typ)
    • Operating Temperature: 10℃ ~ 60℃ (14℉ ~ 140℉ )
    • Backlit LCD resolution: 212*64
    • Smart Port, Micro SD card slot and DSC Port
    • Mini USB interface: supports 2S Libattery balancing charge
    • Model memories: 60 models (expandable by Micro SD card)
    • Compatibility: ACCST D16 and ACCESS receivers

    Package Included:

    • Frsky Taranis X9D Plus SE 2019 Version 2.4G 24CH OpenTX Transmitter x 1
    • TX strap
    • EVA carry bag
    SKU: X9DPSE2019
    €289.00
    inc. VAT

     IN STOCK
  • Double Sided VHB Acrylic Foam Tape Heavy Duty Black 2mm, 15mm wide

    Double Sided VHB Acrylic Foam Tape Heavy Duty Black 2mm, 15mm wide

    Grey double coated acrylic foam tape with a high tack acrylic adhesive. 2mm thick. The VHB double sided tape is a tape which is extremely strong, conformable, versatile and UV resistant.This tape bonds to a wide variety of surfaces, including: Metals - Some plastics Composites - Sealed woods - Glass

    Perfect for Electronics applications, receivers, gyros, and wires. and small servos

    Pack of 1meter

    SKU: VHB-215
    €3.00
    inc. VAT

     IN STOCK
  • Double Sided VHB Acrylic Foam Tape Heavy Duty Black 2mm, 25mm wide

    Double Sided VHB Acrylic Foam Tape Heavy Duty Black 2mm, 25mm wide

    Grey double coated acrylic foam tape with a high tack acrylic adhesive, 25mm wide, 2 mm thick. The VHB double sided tape is a tape which is extremely strong, conformable, versatile and UV resistant.This tape bonds to a wide variety of surfaces, including: Metals - Some plastics Composites - Sealed woods - Glass

    Perfect for Electronics applications, receivers, gyros, and wires. and small servos

    Pack of 1meter

    SKU: VHB-225
    €4.00
    inc. VAT

     IN STOCK
  • RadioMaster TX16S Hall Sensor 16CH OpenTX Transmitter COMBO with TBS Micro TX

    RadioMaster TX16S Hall Sensor 16CH OpenTX Transmitter COMBO with TBS Micro TX

    RadioMaster TX16S Hall Sensor 16CH Multi-protocol RF System OpenTX Transmitter and TBS Micro TX

    List of protocols supported can be found HERE

    Why choose TX16S?

    •     Built in USB-C Charging
    •     Touch Panel
    •     USB-C Data/simulator port
    •     Bigger battery compartment
    •     External SD card slot
    •     2 X UART ports for updates and DIY
    •     Improved menu navigation with Page back and forward
    •     Grip Ergonomic design
    •     Better switch quality and placement design
    •     Better sliders with good center feedback
    •     Full Size (not small short throw) HALL gimbal with CNC Aluminum face
    •     Official OpenTX support
    •     Official Multi-module support
    •     Improved speaker circuit (no noise)
    •     Included EPP carry box

    ​Description

    1. Channel: 16CH
    2. Mode: Mode2- can be changed
    3. Size: 183*212*66 mm
    4. Weight: 736g (without battery)
    5. Voltage: DC7-8.4V
    6. Battery Compartment: 25*52*97mm
    7. 2 x18650 (tray included) , 21700 7.4v 2s Pack or 7.4v 2s Lipoly (Batteries not included)
    8. Current: 400mah (excluding external module)
    9. External Micro SD slot: Card Included
    10. 2 x External UART Expansion Ports

    Features

    • STM32F429BIT6 MCU
    • Industrial grade 4.3 inch 480*272 outdoor readable color touch panel screen
    • Compatible with OpenTX
    • Wheel menu button
    • Full Size High Quality HALL sensor gimbals with CNC Aluminum Facias
    • Internal Multi-protocol RF System
    • Full Speed Native TBS Crossfire support (400K)
    • Supports Telemetry (Protocol and Receiver dependent)
    • Memory 16M (can be expanded by Micro SD card)
    • Voice function
    • Vibration reminder function
    • Improved JR module slot
    • 6-Flight Mode Buttons (Pixhawk and more!)
    • Three-color LED status display
    • USB-C Charging port.
    • USB-C Simulator and PC connection port
    • External UART ports to expand the capabilities of your radio.

    Internal Multi-protocol RF System
    Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
    Texas Instruments CC2500: FrSky, Futabas SFHSS
    Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
    Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models

    RF Chip Data
    The TX16S internal RF system features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module most of today’s prominent RF protocols (See RF Chip data below). The RadioMaster internal RF module will support firmware updates directly from the radios Operating system. No complicated update procedures.

    Package included:

    • 1 x TX16S/TX16S with TBS Crossfire MicroTX
    • 1 x USB-C Cable
    • 1 x 18650 Tray
    • 1 x Throttle Return Springs
    SKU: RMTX16S-TBS
    €239.00
    inc. VAT

     LOW STOCK
  • RadioMaster TX16S Hall Sensor Gimbals 16CH Multi-protocol System OpenTX Transmitter

    RadioMaster TX16S Hall Sensor Gimbals 16CH Multi-protocol System OpenTX Transmitter

    RadioMaster TX16S Hall Sensor Gimbals 16CH Multi-protocol System OpenTX Transmitter

    List of protocols supported can be found HERE

    Why choose TX16S?

    •     Built in USB-C Charging
    •     Touch Panel
    •     USB-C Data/simulator port
    •     Bigger battery compartment
    •     External SD card slot
    •     2 X UART ports for updates and DIY
    •     Improved menu navigation with Page back and forward
    •     Grip Ergonomic design
    •     Better switch quality and placement design
    •     Better sliders with good center feedback
    •     Full Size (not small short throw) HALL gimbal with CNC Aluminum face
    •     Official OpenTX support
    •     Official Multi-module support
    •     Improved speaker circuit (no noise)
    •     Included EPP carry box

    ​Description

    1. Channel: 16CH
    2. Mode: Mode2- can be changed
    3. Size: 183*212*66 mm
    4. Weight: 736g (without battery)
    5. Voltage: DC7-8.4V
    6. Battery Compartment: 25*52*97mm
    7. 2 x18650 (tray included) , 21700 7.4v 2s Pack or 7.4v 2s Lipoly (Batteries not included)
    8. Current: 400mah (excluding external module)
    9. External Micro SD slot: Card Included
    10. 2 x External UART Expansion Ports

    Features

    • STM32F429BIT6 MCU
    • Industrial grade 4.3 inch 480*272 outdoor readable color touch panel screen
    • Compatible with OpenTX
    • Wheel menu button
    • Full Size High Quality HALL sensor gimbals with CNC Aluminum Facias
    • Internal Multi-protocol RF System
    • Full Speed Native TBS Crossfire support (400K)
    • Supports Telemetry (Protocol and Receiver dependent)
    • Memory 16M (can be expanded by Micro SD card)
    • Voice function
    • Vibration reminder function
    • Improved JR module slot
    • 6-Flight Mode Buttons (Pixhawk and more!)
    • Three-color LED status display
    • USB-C Charging port.
    • USB-C Simulator and PC connection port
    • External UART ports to expand the capabilities of your radio.

    Internal Multi-protocol RF System
    Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
    Texas Instruments CC2500: FrSky, Futabas SFHSS
    Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
    Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models

    RF Chip Data
    The TX16S internal RF system features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module most of today’s prominent RF protocols (See RF Chip data below). The RadioMaster internal RF module will support firmware updates directly from the radios Operating system. No complicated update procedures.

    Package included:

    • 1 x TX16S/TX16S with TBS Crossfire MicroTX
    • 1 x USB-C Cable
    • 1 x 18650 Tray
    • 1 x Throttle Return Springs
    SKU: RMTX16S
    €189.00
    inc. VAT

     IN STOCK
  • TBS CROSSFIRE NANO RECEIVER (SE) includes the TBS Immortal-T V2 Antenna

    TBS CROSSFIRE NANO RECEIVER (SE) includes the TBS Immortal-T V2 Antenna

    TBS Crossfire nano RX for people who want to save space and solder. Full range, designed specifically for mini- and micro-quads! The Special Edition (SE) includes the TBS Immortal-T V2 Antenna!

    TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the smallest size of any receiver in the industry (yes, it’s smaller than the XM+).

    SPECIFICATIONS

    • Weight: 0.5g (receiver only)
    • Size: 11mm x 18mm
    • Requires: Firmware V2.25

    INCLUDES

    • 1x TBS Crossfire Nano Receiver
    • 1x TBS Crossfire Immortal T V2 Antenna
    • 1x Spare shrink tube
    • 6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
    • 1 x pin header 1×4
    SKU: TBS-CROSSFIRE-MICRO 1
    €35.90
    inc. VAT

     IN STOCK
  • KS1229 THROTTLE CONTEST Lever FOR OS50/61/70/91; YS61/80/91

    KS1229 THROTTLE CONTEST Lever FOR OS50/61/70/91; YS61/80/91

    THROTTLE LEVER FOR CONTEST: OS50/61/70/91; YS61/80/91
    Easy to adjust as the throttle lever can be installed at any position
    preferred. Possible to tighten from the side by screw too.

    SKU: KS-1229
    €15.00
    inc. VAT

     IN STOCK
  • Futaba receiver R7108 SB FASST & FASSTest Better and Smarter

    Futaba receiver R7108 SB FASST & FASSTest Better and Smarter

    The new Futaba R7108SB is a compact and lightweight FASSTest 2.4 GHz receiver with integrated telemetry function. It is based on the well-known Futaba R7008SB. What is new about this receiver is that it also features the older FASST protocols, which can be switched directly at the receiver.

    This means that this receiver can also be operated with older FASST systems. Due to the super slim design, the receiver is perfectly suited for models with narrow hulls. The R7108SB has antenna diversity and constantly checks the signal quality of both antenna inputs. This way the receiver switches to the better input signal in a flash and seamlessly.

    Technical data:

    •     Frequency band: 2.4 GHz
    •     Transmission system: FASSTest / FASST
    •     Number of channels: 8 PWM / 18 S.BUS
    •     S.BUS output: S.BUS / S.BUS2
    •     Voltage range: 3.7 to 8.4 V
    •     Dimensions: 47 x 25 x 14,3mm
    •     Weight: 12g
    SKU: R7108SB
    €149.90
    inc. VAT

     LOW STOCK
  • Ceramic Hybrid ball Bearing 17x35x8

    Ceramic Hybrid ball Bearing 17x35x8

    Ceramic Hybrid ball Bearing 17x35x8

    Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 2500 plus degrees F. extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

    The ceramic ball on the right is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

    Shield type/color may vary

    SKU: BZC-16003
    €12.00
    inc. VAT

     IN STOCK
  • Sab Goblin Kraken 580 Small brother Helicopter Yellow-Blue

    Sab Goblin Kraken 580 Small brother Helicopter Yellow-Blue

    Release date is around End June, preorders opened

    • Feature of being able to use blades up to 600 mm in length.
    • Kraken 580 works perfectly with cyclic mini-servos (torque over 8 Kg-cm). Kit includes supports for mini-servo.Possible to use standard servos of
    • size of 40 mm, with Optional parts H1217-S & H1207-S
    • Fit motor pulleys H0015-xx-S series
    • Suggested motor is scorpion 4025-xx SERIES, with 6mm shaft 26mm min length

    TECHNICAL SPECITICATIONS

    • AIRFRAME weight: 1760gr ( with blades, no battery, no electronics )
    • Main blade length: 550mm to 600mm
    • Tail blade length: 95 to 105 mm
    • Main rotor diameter: 1270 mm (with 570 mm blades included)
    • Tail rotor diameter: 260 mm (with 95 mm tail blades included)
    • Cyclic Servos: mini size 35 mm (standard size 40mm with optional parts )
    • Tail Servo: standard size 40mm.
    • Main Rotor ratio : 11.5 to 8.6 :1 ( 22T included: 9.4:1)
    • Tail Rotor ratio : 5.3-4.9:1 ( 23T included: 4.9:1 )
    • Typical motor : 4025 series, 6S 1000-1200 Kv, 12S 500-600 Kv
    • Typical speed controller: 6S 120-140 A, 12S 100-130A
    • Battery size: 6S 5000/5800 mAh, 12S 2600/3200 mAh
    SKU: SG580
    €749.00
    inc. VAT

     72HR STOCK
  • RCPROPLUS 8mm Solderless ELECTRIC Connector (6M,6F,Red,Black)

    RCPROPLUS 8mm Solderless ELECTRIC Connector (6M,6F,Red,Black)

    Meet the "REB 8806 S.T" aka S7 Solderless connetors! Solderless? Absolutely! Solderless connections are more commonly found in applications outside the R/C industry, and inherently provide lower point of fatigue within the connection.

    The RCPP Solderless connectors are built with the ability to install the connectors to each application in minutes. With the bare wires exposed, each bulle

    The RCPP Solderless connectors are built with the ability to install the connectors to each application in minutes.
    With the bare wires exposed, each bullet connector utilizes 2 setscrews (180 degrees apart), to create a secure mechanical connection.

    Solderless Connectors for the connection between ESC and Battery, Charge Lead etc.

    Peak Current : 310A
    Continuous Current : 260A
    Applicable Wire : 6-8 AWG
    24K Gold Plated 5u"/Packing : 3 Set/6 Pair (T:6M+6F)

    SKU: REB8806STS8P6
    €55.00
    inc. VAT

     IN STOCK
  • Hybrid Ceramic Ball Bearing Set for Engines OS40-55, TT40-56,YS50-56

    Hybrid Ceramic Ball Bearing Set for Engines OS40-55, TT40-56,YS50-56

    This is Ceramic Hybrid Ball bearings set. Its made to fit to Helicopter engines : OS 40/46/50/55- Thunder Tiger 40/46/53 Redline & Pro - Magnum 40/46, YS 50-56

    Those bearings are rated for 250H of engine work

    Those bearings might fit other engines as well

    Hybrid Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 2500 plus degrees F. extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

    Set include 2 ceramic bearings, Front and Rear

    The ceramic ball on the right is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

    Instructions to use:

    Front bearing must have 1 sealing. the inner part must Not have sealing. Sealings are very easy to remove with small screwdriver( wear glasses when working with such tools)

    Rear Bearing( larger one) must be without any sealings. please remove if needed.

    Hybrid bearings cangive you a feeling of "dry move", but once lubricated, they will be running smooth and almost without friction.

    SKU: R6Z-6902
    €23.00
    inc. VAT

     IN STOCK
  • Zenoah BH hanson Modified 310 RC 3D Max Helicopter gasser Engine fits Whiplash and others

    Zenoah BH hanson Modified 310 RC 3D Max Helicopter gasser Engine fits Whiplash and others

    BH Hanson most powerful RC Heli engine. 30.5 cc using Zenoah 36mm modified cylinder, 2mm stroker crank, pump bulb 990 carburetor, trued and balanced crankshaft and flywheel for smooth running ,transfer port modifications, lightened piston, metal isolator block, air filter, and muffler. very smooth and very powerful operation up to 12,800 engine speed. Perfect for heavy lifting or gear up for higher head speed

    SKU: RCM16299
    €699.00
    inc. VAT

     LOW STOCK
  • Hexagon Screw Driver Set Black gold with Stainless tips 1.5-2.0-2.5-3mm

    Hexagon Screw Driver Set Black gold with Stainless tips 1.5-2.0-2.5-3mm

    Hexagon Screw Driver Set Black gold with Stainless tips 1.5-2.0-2.5-3mm

    Super hard screwdriver head made by HSS high alloy steel,wear and distortion resisting!

    Purifier handle made by aluminum alloy CNC , inside can place components and screws!

    SKU: HZ055
    €19.90
    inc. VAT

     72HR STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

    
    SALE
  • Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC HV 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controler ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

     LOW STOCK
    SALE
  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €299.00
    inc. VAT

     LOW STOCK
    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesnt qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

     72HR STOCK
    SALE

Manufacturers

Latest Video

RC Market