Transmitters & Radios

Jeti Duplex DS-14 transmitter preconfigured mode 1/3

The DS-14 represents Jeti's new, State-of-the-art, transmitter that sets a new quality standard for the RC Industry with its revolutionary features and brand new plastic Hall Sensor Gimbals. Jeti's final touches and finishes are outstanding. The front panel of the system is made of aluminum with UV stabilized clear coating and the case is made of painted, CNC cut, solid aluminum.

This revolutionary, digital, 14+8 (22) Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antennas, a mini USB port, built-in speaker, headset jack, plastic transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DS-14s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 20 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DS-14 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Specifications and Features
State-of-the-art, upgradable firmware which gives you full freedom and complete control.Solid aluminum, CNC cut transmitter case with fully integrated antennas and oversized LCD display.Mini USB port for firmware upgrades and PC download of telemetry data.Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited. Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch. 9-point, programmable curve mixes for all 14 digital proportional channels. You can set up not just dual, but triple rates.Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable. Unlimited use of the on-board 4GB SD card memory. Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited. Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more. All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose. Up to 5 programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:

• (1) Jeti Duplex DS-14 Transmitter
• (1) 110-230V Wall Power Supply
• (1) Tx Battery Li-poly 3200mAh 3.7V (1S2P)
• (1) Mini USB to USB PC Cable

The DS-14 represents Jeti's new, State-of-the-art, transmitter that sets a new quality standard for the RC Industry with its revolutionary features and brand new plastic Hall Sensor Gimbals. Jeti's final touches and finishes are outstanding. The front panel of the system is made of aluminum with UV stabilized clear coating and the case is made of painted, CNC cut, solid aluminum.

This revolutionary, digital, 14+8 (22) Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antennas, a mini USB port, built-in speaker, headset jack, plastic transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DS-14s are sure to become the new standard in transmitter performance.

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 20 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DS-14 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Specifications and Features
State-of-the-art, upgradable firmware which gives you full freedom and complete control.Solid aluminum, CNC cut transmitter case with fully integrated antennas and oversized LCD display.Mini USB port for firmware upgrades and PC download of telemetry data.Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited. Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch. 9-point, programmable curve mixes for all 14 digital proportional channels. You can set up not just dual, but triple rates.Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable. Unlimited use of the on-board 4GB SD card memory. Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited. Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more. All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose. Up to 5 programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:

• (1) Jeti Duplex DS-14 Transmitter
• (1) 110-230V Wall Power Supply
• (1) Tx Battery Li-poly 3200mAh 3.7V (1S2P)
• (1) Mini USB to USB PC Cable

Jeti hand transmitter DS-12 multimode black

A handy transmitter, high-quality construction with plastic housing, a large color display, ball bearing stick units and wear-free Hall sensors. A light weight, the quality design of the housing and a great ergonomic features of this transmitter. The software can be extended to your own preference and of course here JETI offers the full telemetry capabilities.
expected equipment, stand in February 2019 :

• Channels: 8 (up to 12 expandable)
• 2.4GHz RF modules: 1
• 900MHz backup system: Optional
• Color TFT: 3.5 inch, 320x240 pixels
• Stick units with Hall sensors: Yes
• Resolution stick: 4096
• Internal memory: SD card, 8GB
• Free mixers: 5 (up to 20 expandable)
• Stopwatches: 3 (up to 20 expandable)
• Values ​​on display represented: 10 (up to 40 expandable)
• (Expandable up to 20) 5: Spachausgabe for functions
• Alarms: 10 (up to 40 expandable)
• Channels for gyroscopic axes: 1 (up to 3 expandable)
• Phases of flight: 3 (up to 6 expandable)
• Flight phase trims: Yes
• DITEX telemetry values: 16
• Lua extensions: max. 10
• MP3 player: Yes
• Microphone: Yes

Optional equipment, stand in February 2019 :

• Logical switches: 0 (up to 16 expandable)
• Sequencer: 0 (up to 6 expandable)
• Motion sensor: optional
• Audio Player: optional
• Telemetry transmitter: 0 (up to 16 expandable)
• Vibrate: optional
• Speech: optional
• Power Balancer: optional
• Function curves: optional
• Gas Limiter: optional
• Variometer: optional

Jeti hand transmitter DS-12 multimode Blue

A handy transmitter, high-quality construction with plastic housing, a large color display, ball bearing stick units and wear-free Hall sensors. A light weight, the quality design of the housing and a great ergonomic features of this transmitter. The software can be extended to your own preference and of course here JETI offers the full telemetry capabilities.
expected equipment, stand in February 2019 :

• Channels: 8 (up to 12 expandable)
• 2.4GHz RF modules: 1
• 900MHz backup system: Optional
• Color TFT: 3.5 inch, 320x240 pixels
• Stick units with Hall sensors: Yes
• Resolution stick: 4096
• Internal memory: SD card, 8GB
• Free mixers: 5 (up to 20 expandable)
• Stopwatches: 3 (up to 20 expandable)
• Values ​​on display represented: 10 (up to 40 expandable)
• (Expandable up to 20) 5: Spachausgabe for functions
• Alarms: 10 (up to 40 expandable)
• Channels for gyroscopic axes: 1 (up to 3 expandable)
• Phases of flight: 3 (up to 6 expandable)
• Flight phase trims: Yes
• DITEX telemetry values: 16
• Lua extensions: max. 10
• MP3 player: Yes
• Microphone: Yes

Optional equipment, stand in February 2019 :

• Logical switches: 0 (up to 16 expandable)
• Sequencer: 0 (up to 6 expandable)
• Motion sensor: optional
• Audio Player: optional
• Telemetry transmitter: 0 (up to 16 expandable)
• Vibrate: optional
• Speech: optional
• Power Balancer: optional
• Function curves: optional
• Gas Limiter: optional
• Variometer: optional

Jeti hand transmitter DS-12 multimode RED

A handy transmitter, high-quality construction with plastic housing, a large color display, ball bearing stick units and wear-free Hall sensors. A light weight, the quality design of the housing and a great ergonomic features of this transmitter. The software can be extended to your own preference and of course here JETI offers the full telemetry capabilities.
expected equipment, stand in February 2019 :

• Channels: 8 (up to 12 expandable)
• 2.4GHz RF modules: 1
• 900MHz backup system: Optional
• Color TFT: 3.5 inch, 320x240 pixels
• Stick units with Hall sensors: Yes
• Resolution stick: 4096
• Internal memory: SD card, 8GB
• Free mixers: 5 (up to 20 expandable)
• Stopwatches: 3 (up to 20 expandable)
• Values ​​on display represented: 10 (up to 40 expandable)
• (Expandable up to 20) 5: Spachausgabe for functions
• Alarms: 10 (up to 40 expandable)
• Channels for gyroscopic axes: 1 (up to 3 expandable)
• Phases of flight: 3 (up to 6 expandable)
• Flight phase trims: Yes
• DITEX telemetry values: 16
• Lua extensions: max. 10
• MP3 player: Yes
• Microphone: Yes

Optional equipment, stand in February 2019 :

• Logical switches: 0 (up to 16 expandable)
• Sequencer: 0 (up to 6 expandable)
• Motion sensor: optional
• Audio Player: optional
• Telemetry transmitter: 0 (up to 16 expandable)
• Vibrate: optional
• Speech: optional
• Power Balancer: optional
• Function curves: optional
• Gas Limiter: optional
• Variometer: optional

JETI handheld transmitter DS-16 II Carbon Line Red Multimode

• 24 full control channels
• 3 HF modules (2x 2.4Ghz, 1x 900MHz optional)
• color display
• 4 types of models (surface / helicopter / multicopter / functional model)
• MP3 player
• Telemetry processes up to 64 sensor values
• Voice input commands optional

900MHz NG receiver system (optionally)
The 900MHz NG receiver system is suitable for the DS-12, DS-16 II as well as the DC-16 II transmitters. It is an independent, second transmission system in a second frequency range. If this system is used, the model can continue to be controlled even if the 2.4GHz band is disturbed (e.g. by radio relay, during copter flights for television broadcasts, etc.). The 900MHz backup system only becomes active when this occurs. So it essentially serves to expand the safety in high-quality models. Of course, this backup system can be activated or deactivated separately for each model. It is always used together with the 2.4 GHz transmission system, not individually.

Transmitter hardware

• Multimode joystick
• Determination of stick positions using Hall sensors (without potentiometer)
• Control path resolution 4096 steps
• color display, backlit
• rotating stick aggregate
• Fully aluminum joysticks / aggregates, adjustable in length, with ball bearings
• internal storage
• integrated LiIon battery for long operating time
• Charger
• Aluminum transport case
• Speech
• headphone jack
• digital trims
• anodized aluminum housing

Transmitter software

• 2.4 GHz DUPLEX EX
• 24 control channels
• customizable menu navigation
• almost unlimited setting options
• almost unlimited number of model memories
• Firmware update via USB
• ultra-fast control reactions
• Power management system for longer operating times
• PC interface
• 4 adjustable model types (airplane / helicopter / functional model; multicopter)
• 4 languages (EN / DE / CZ / FR)

Telemetry functions
Voice output of telemetry warnings and telemetry values
Display of telemetry data in real time on the transmitter display
Record telemetry data
PC transmission, storage and processing of telemetry values??
Saving (backup) the model data and transmitter settings on the PC

• Delivery contents

JETI handheld transmitter DS-16 II Carbon Line Red Multimode (delivery state mode 2, control mode very easy to change), receiver REX 10, transmitter battery installed, charger for transmitter battery, strap and stable carrying case

Jeti transmitter DS-24 carboxylic dark blue line

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti transmitter DS-24 carboxylic dark line dark green

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Jeti transmitter DS-24 carboxylic line dark red

Preset to Mode 2

Hardware:

• clear, timeless form
• precision production in the EU
• metal housing
• Fully adjustable multimode stick
• easy installation of stick switches
• fast, accurate responses stick
• Backlit display
• Color display easily even in direct sunlight readable
• mechanically protected antenna positioning
• Long-life Li-Ion battery for long life and low self-discharge
• Integrated charging electronics for the transmitter battery
• Loading feature via USB
• Headphone Jack
• built-in microphone
• 2 HF modules 2.4GHz  
• 1 HF module 900 MHz
• USB connection to your computer
• data storage
• Internal PPM in / out slot
• nearly Wireless internal structure
• FM radio
• vibrating alert
• Encoder on the bottom

Software:

• up to 24 channels proportional
• digital trims
• minimum latency
• Power management for maximum battery life
• Firmware updates easily via USB
• Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
• time display
• Speech output for alarms and telemetry values
• Clear exposition of the Channel Set
• simple and logical programming
• multilingual
• Audio player (MP3)

Telemetry:

• Display of telemetry data on the display in real time
• Recording of telemetry data
• Speech telemetry and alarm values
• Bi-directional communication via EX and EX bus protocol
• Graphical representation of the telemetry data directly on the display
• telemetry transmitter

Delivery:

• DS-24
• Alucase
• 900 MHz Rsat
• Power supply
• USB cable
• Transmitter Neck Strap

Advanced 24-channel RC set Twin 2.4GHz/ACCST D16/ACCESS. Ergonomic robust body, precision gimbals with Hall sensors. Full telemetry support, large color touch screen with intuitive user interface. ETHOS™ operating system. Extensive range of functions and mixes for all types of RC models. KAVAN servo programming. Support for telemetry receivers with classic PWM and S.BUS outputs.

Exactly according to preference

The rigorously CNC-machined aluminum gimbals are mounted on 10 ball bearings. Hall sensors instead of conventional potentiometers sense the movement of the sticks. This makes the control more precise and reliable. You can also customize the controllers to your own preferences. Easily adjust the length of the sticks, rotate the gimbals up to 8°, and limit the range of stick travel to 45° to 60°.

Comfortable and stylish

Looks matter. Comfort matters even more. The gimbals are closer to the edges of the transmitter body for a comfortable and secure grip. Both handheld and when using the. Switches, buttons, dials and trims are always within reach. So you don't have to take your eyes off your model for a second. But the stylish and vigorous exterior of the transmitter tempts you to do so.

Don't get jammed

The 2.4GHz simultaneous dual-frequency transmission system communicates simultaneously with both the receiver and the RF module. The two built-in 2.4GHz antennas have greater omnidirectional coverage for the transmitted signal compared to a single antenna. This makes the transmission uninterrupted and has a rapid response time of under 4 ms. Data (including telemetry) will flow safely to you over several kilometers.

Touch the colors

The large color touchscreen has a resolution of 800×480 px on a 4.3" diagonal. It displays the ETHOS™ operating system environment. With adjustable display brightness, you won't get lost in the dark or directly under the sun. Intuitively, clearly, and most importantly, conveniently set up or display everything from basic telemetry to advanced mixes and curves directly in the transmitter. You can even choose the colour scheme or turn on dark mode and read everything in English or many other languages

Connectivity for an easier life

Use the USB serial port for data transfer, battery charging, and even if you want to fly the simulator. And because it's USB-C, you always plug it in on the first try. Of course, there's also a trainer port, headphone jack or microSD card slot. Besides audio or voice alerts, you can also activate vibration feedback.

Plugging in a single connector is more elegant than searching for identical (and charged) batteries. The included 2S LiPo 4000mAh battery provides 6.5–8.4V power. It can be safely charged with a USB-C cable thanks to the built-in balancer. No need to remove it from the case. The available timer and warning signals take care of early warning of running out of power.

Advanced 24-channel RC set Twin 2.4GHz/ACCST D16/ACCESS. Ergonomic robust body, precision gimbals with Hall sensors. Full telemetry support, large color touch screen with intuitive user interface. ETHOS™ operating system. Extensive range of functions and mixes for all types of RC models. KAVAN servo programming. Support for telemetry receivers with classic PWM and S.BUS outputs.

Exactly according to preference

The rigorously CNC-machined aluminum gimbals are mounted on 10 ball bearings. Hall sensors instead of conventional potentiometers sense the movement of the sticks. This makes the control more precise and reliable. You can also customize the controllers to your own preferences. Easily adjust the length of the sticks, rotate the gimbals up to 8°, and limit the range of stick travel to 45° to 60°.

Comfortable and stylish

Looks matter. Comfort matters even more. The gimbals are closer to the edges of the transmitter body for a comfortable and secure grip. Both handheld and when using the. Switches, buttons, dials and trims are always within reach. So you don't have to take your eyes off your model for a second. But the stylish and vigorous exterior of the transmitter tempts you to do so.

Don't get jammed

The 2.4GHz simultaneous dual-frequency transmission system communicates simultaneously with both the receiver and the RF module. The two built-in 2.4GHz antennas have greater omnidirectional coverage for the transmitted signal compared to a single antenna. This makes the transmission uninterrupted and has a rapid response time of under 4 ms. Data (including telemetry) will flow safely to you over several kilometers.

Touch the colors

The large color touchscreen has a resolution of 800×480 px on a 4.3" diagonal. It displays the ETHOS™ operating system environment. With adjustable display brightness, you won't get lost in the dark or directly under the sun. Intuitively, clearly, and most importantly, conveniently set up or display everything from basic telemetry to advanced mixes and curves directly in the transmitter. You can even choose the colour scheme or turn on dark mode and read everything in English or many other languages

Connectivity for an easier life

Use the USB serial port for data transfer, battery charging, and even if you want to fly the simulator. And because it's USB-C, you always plug it in on the first try. Of course, there's also a trainer port, headphone jack or microSD card slot. Besides audio or voice alerts, you can also activate vibration feedback.

Plugging in a single connector is more elegant than searching for identical (and charged) batteries. The included 2S LiPo 4000mAh battery provides 6.5–8.4V power. It can be safely charged with a USB-C cable thanks to the built-in balancer. No need to remove it from the case. The available timer and warning signals take care of early warning of running out of power.

The new Megatech T4PL pistol-grip computer system features a sleek, modern design. The focal point of the transmitter is the backlit screen, which is located in the upper part of the transmitter, where it is clearly visible. For professional RC car and racing boat operators, exploiting 2.4 GHz FHSS technology with Frequency Hopping

No more same-channel interference, virtual immunity to interference, and resistance to background interference - these are the main advantages of FHSS technology.

When designing the T4PL transmitter, which is a completely new development, the various controls were arranged with ergonomic efficiency as top priority. All the controls are well positioned and easy to use. The system is also very light in weight at just 550 g.

The central control area with LCD screen lies in the direct line of sight of the operator, making it easy to read off values even during a race. The mixer functions are virtually identical to those of the proven T4PK(S) professional system.
An innovation in this class of systems is the expansion to four control channels. The separate fourth channel is particularly useful with 1 : 5 scale RC cars for controlling the front and rear brakes separately.

Another new feature is the Crawler function for Trials vehicles. This term refers to a mixer function for four-wheel steering. The front and rear axles can be steered separately, together, in the same or opposite directions, depending on requirements.

The Timer function has also been expanded by a pit-stop timer, to remind the operator to call in for pit-stops in good time.
Switching from S-FHSS (High-Speed mode - only in conjunction with digital servos) and FHSS -mode.
Forty models can be stored in the internal model memory, which is sufficient even for an extensive array of vehicles.

Functions:

40 internal model memories

Model name, reset and copy.

FHSS / S-FHSS modulation

Fail-safe

1 programmable mixer with Offset

Free assignment of transmitter controls and mixer functions

Pre-selectable function levels for beginner and pro-standard

Graphic servo travel display

Basic settings such as contrast, beep and Home menu display

Timer / Counter

Steering: servo centre offset, servo reverse, end-point adjustment, servo speed in both directions, Exponential

Throttle / brake

Brake: braking power, time, cycle, delay and speed (A.B.S). Brake point adjustment, brake mixer to channel 3 and 4

Channel 3: trim, servo centre offset, servo reverse, end-point adjustment, Expo.

Channel 4: trim, servo centre offset, servo reverse, end-point adjustment

30 channels at 1.5 MHz spacing. 2404 ... 2447.5 MHz frequency band.
28 simultaneous users.

Specification:

Weight: 550 g

Frequency band: 2404.00

Current drain: ca 220 mA

Transmission system: FHSS / S-FHSS

Functions: 8/4 Servos

The Mikado VBar Control Touch Radio is the latest iteration of game changing integration between helicopter gyro and helicopter transmitter.

Legendary integration and simplicity is still the heart of the VBar Control Touch design, and now features an extra bright 5.8" multi-touch color display,with ambient-light sensor to automatically control the brightness.
Now including a total of 6 rotary knobs, VBar Control Touch is even more flexible with programming;especially for VPlane Airplane pilots, as four of the six wheels can be used for trim functions.

Underneath the case of the radio is a built in WiFi module used for multiple use scenarios, such as smart phone/tablet interaction, cloud functionality, and over-the-air online updates for VBar Neo gyro. Vbar Control Touch features a fast boot up time, of three seconds. Additionally, an automatic power on feature is present in that if an already bound model is switched on, the VBar Control Touch will power on. Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher.
This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio.

Software Highlights:

•     Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.
•     Readily understandable graphic user interface.
•     Easy programming for new models via the familiar VBar setup wizard.
•     ESC setup wizard for programming all types of speed controllers.
•     ESCs with VBar Control support can be programmed directly from the radio.
•     Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.
•     Bank switching with three banks (fourth Bank Autorotation optional).
•     Real time logging and real time graphic vibration analysis available on display.
•     Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.
•     Create your own screendesign directly on the touchscreen display.
•     Full manual available on the radio by means of context sensitive help.
•     Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).
•     Automatic power-on, if an already bound model is switched on.
•     Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).
•     Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.
•     Wireless buddy boxing with two VBar Control radios, fully configurable.
•     Interact with your smart phone via WiFi (control your music player, exchange photos, open web sites or videos, expand your display for telemetry purposes ...)
•     Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).
•     Access our App Store and do over-the-air online-updates via WiFi*.
•     Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

•     Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.
•     Very good readability even in bright sunlight.
•     WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.
•     Very fast start-up time, from off to fully operational in three seconds.
•     High perfomance low power controller for best user experience and long runtimes.
•     Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.
•     Unlimited model memory.
•     Virtually unlimited number of control channels.
•     High range, low latency, antenna diversity both on transmitter and receiver.
•     Intelligent antenna monitoring and management.
•     Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.
•     Precision gimbals with four ball bearings, fully adjustable.
•     Collective stick can be equipped with optional throw limiter.
•     Delicate rubber lining for comfortable, slip-free and safe holding.
•     Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.
•     Large 2 Watt loudspeaker for alarms and voice output.
•     Vibration alarm (adjustable).
•     Memory accessible as a USB memory stick, no drivers needed.
•     Built-in Lithium Polymer battery allows for long run times.
•     Charge through USB connector or built-in charger.
•     Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data pla

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screendesign directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacities 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hot spot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High performance low power controller for best user experience and long runtime.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Preorder- delivery scheduled on January 2023 : The 200 eur is a Deposit, we will contact you to pay the rest before shipment. the cost of the radio is 1346 eur

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

VBar Control EVO Highlights

New processor: 600 MHz (Touch: 150 MHz), current chip production

Latest technology ARM Cortex M7 with large caches and low power consumption

Graphics processor (GPU)

Internal flash disk 4 GB (Touch: 128 MB)

Faster WIFI 802/b/g/n (3 times faster than before), very fast connection

USB data transfers 10 times faster

Improved Touch Display

USB-C fast charging with 15 W with any off-the-shelf USB-C charger

Extra fast and extra precise reaction to stick inputs due to faster processing

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on www.vstabi.info, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own. More information on this process is available on www.vstabi.info.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Auto-rotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screen design directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Note: The use of the VBar Control radio requires a VBar NEO or an RX Satellite with a legacy VBar or Mini-VBar unit with firmware version 6.0 PRO or higher. This version is free for all legacy devices as an incentive (but not for VBar NEO), for anyone who purchases a VBar Control radio. After registering your VBar Control radio on vstabi web, customers will be able to add and download firmware version 6.0 PRO free of charge, even for any VBars or MiniVBars they already own.

Software Highlights:

Setup, programming and adjusting of VBar-controlled models accomplished directly via VBar Control radio.

Readily understandable graphic user interface.

Easy programming for new models via the familiar VBar setup wizard.

ESC setup wizard for programming all types of speed controllers.

ESCs with VBar Control support can be programmed directly from the radio.

Up to eight parameters can be tuned simultaneously using the optional inputs, with adjustable limitation of the the respective range of values.

Bank switching with three banks (fourth Bank Autorotation optional).

Real time logging and real time graphic vibration analysis available on display.

Graphical telemetry log analyzer for stored flights (overview, energy consumption, event-log) directly readable on the display.

Create your own screendesign directly on the touchscreen display.

Full manual available on the radio by means of context sensitive help.

Easy bind process, allows bind and fly of any model equipped with VLink (e.g. a buddy‘s heli) with your own transmitter (Model Sharing).

Automatic power-on, if an already bound model is switched on.

Several telemetry functions are available, such as voltages, current, rpm, speed, temperature and power consumption of the batteries (may need additional hardware).

Multiple timer functions available with warnings and reminders via sound, voice, or vibration output.

Wireless buddy boxing with two VBar Control radios, fully configurable.

Cloud functions under development (e.g. for archiving, interaction with other users; usage optional).

Access our App Store and do over-the-air online-updates via WiFi*.

Over-the-air online-update your VBar NEO-flybarless systems via WiFi* (for purchases, a device with internet access and web browser is required).

Hardware Highlights:

Extra bright capacitive 5.8 inch multi-touch color display, with ambient-light sensor to automatically control the brightness.

Very good readability even in bright sunlight.

WiFi module connects to your WiFi network at home as well as to your personal hotspot on the go.

Very fast start-up time, from off to fully operational in three seconds.

High perfomance low power controller for best user experience and long runtimes.

Reliable 80 Channel 2.4 GHz FHSS bidirectional flight control, programming/setup and telemetry remote control system.

Unlimited model memory.

Virtually unlimited number of control channels.

High range, low latency, antenna diversity both on transmitter and receiver.

Intelligent antenna monitoring and management.

Fully equipped with four 3-position switches, two 3-position quick-break-switches as well as six rotary inputs (four trim wheels, two rotating knobs), all fully programmable.

Precision gimbals with four ball bearings, fully adjustable.

Collective stick can be equipped with optional throw limiter.

Delicate rubber lining for comfortable, slip-free and safe holding.

Well-balanced with two-point neck-strap attachment, no additional retainer bracked required.

Large 2 Watt loudspeaker for alarms and voice output.

Vibration alarm (adjustable).

Memory accessible as a USB memory stick, no drivers needed.

Built-in Lithium Polymer battery allows for long run times.

Charge through USB connector or built-in charger.

Power supply for fast charging included.

* Online features require a WiFi connection and a device with internet access. Data transfers may cause additional costs, depending on your mobile data plan.

Delivery including:

- VBar Control Touch (formerly known as 05130)
- VBar NEO VLink 04949