Micro Spyrit RC 5 Channel Quadrocopter With Camera
This is the "micro" version of the famous Spyrit.
We have reduced the size but the functions are the same: acrobatic figures (loops and flips) at the push of a button on the transmitter, HD camera (video or still photo) with recording on micro-SD card.
Main structure in lightweight and resistant ABS resin.
Removable flexible rotor covers.
Features:
3D acrobatic figures (looping / flip) easily
Triggering of shots (video or photo of choice) from the transmitter
Flight mode selector (beginner or expert)
Technical characteristics:
Fixed shooting resolution: 11x6cm 300dpi
Resolution of video sequences: 1,280 x 720 pixels 16/9 30 fps
Newest Spyrit Max FPV-X8C RC Quadcopter with HD Camera 6 Axis 3D Flip Fly. HD camera allows you to take pictures and record videos.
With headless mode function.
The 6-axis system allows the quad to be hand launched.
6-Axis gyro quad-rotorcraft flight, strong stability, can easily implement various flight movements, stronger wind resistance, easier to control.
2.4 technology adopted for anti-interference, even more than one quadcopter is flying at the same time they will not interfere with each other.
The quadcopter can fly both indoor and outdoor.
Including 4CH digital proportional RC system.
Frequency: 2.4G
Functions: Up / down, left / right sideway fly, forward / backward, turn left / right, built - in 6 axis gyro, 360 degree 3D fly and special functions (continuous rolling)
Lens pixels: 2.0MP
Battery: 7.4V 2000mAh Li-on battery ( included )
Camera: fixed HD camera with Wifi
Flying time: 10-12mins
Charging time: About 120mins ( by USB)
Controlling distance: 50m
Battery for controller: 6 x AA battery ( not included )
Product size: 60x60x18 cm
Features:
With camera, can take video and picture.
With headless mode function.
The 6-axis system allows the quad to be hand launched.
6-Axis gyro quad-rotorcraft flight, strong stability,can easily implement various flight movements, stronger wind resistance, easier to control.
2.4 technology adopted for anti-interference.even more than one quadcopter is flying at the same time they will not interfere with each other.
The quadcopter can fly both indoor and outdoor.Including 4CH digital proportional RC system.
Function: Video/Photograph/Raise & Down/Forwards & Backwards/Left & Right Turning/Left & Right Flying/Hovering/360 Degree Rotating
Electric Racing Buggy 4x2 Version ready to run, with radio 2.4GHz, battery NiMh 1800mAh and AC/DC charger. Electronics waterproof, allows to run in wet conditions (except total dumping).
Specification:
Adjustable Ball differential
Strengthened plastic Frame
Handled Universal shaft drive rear
Hydraulic Shock absorbers front / rear with body thread to adjust the spring
Tie-rods with inverted thread
Engine Brushed size(format) 540
Wheel and tires included
Mini box for receiver and ESC
Tie-rods with inverted thread
Compact servo-saver
Adjustable Triangulation
Mini front bumper and motor protection
Polycarbonate pre-decorated body
Box contents:
Radio 2,4 Ghz
Battery NiMh 1800
Charger 220 V 500 mAh
ESC Waterproof (Li-Po 2S or 3S / Ni-Mh 5 to 9 Cell)
Medium strength general purpose thread locker Locks threaded fasteners against vibration Perfect for use in helicopters and all RC cars Clean and dry parts for best results (removing grease, oil and dirt)
Parts can be returned to service immediately in MOST CASES Thread locking compound comes in a Red bottle with a clear nozzle tip
Comments:
This bottle of glue will appear big in context to the glue.
The reason being is the glue requires a large amount of oxygen or the glue will dry out.
All one would need to do once you have the glue is shake the bottle and turn upside down, if the tip turns Blue then the glue is present.
To some the bottle may appear empty.
Application:
* Please remove all grease, moisture glue and apply the adhensive to the surface to be adhered, (Not Plastic Bolts)
* Wait for 1 ~ 10 minutes before exerting force to stabilize the adhensive grip.
* Excessive glue may result in extended gluing time.
* Seals Metal Parts Against Vibration, Parts Can Later Be Separated Using Hand Tools
The Pirate furious made by T2M is an off road tuggy that can handle all-terrain due to its 140 mm off-road tires. It has an adjustable rear spoiler, an amazing painted and decorated polycarbonate body. The truck is illuminated with LED lights, white in front and red at the rear, which makes it extra visable. To make doing a wheely easier, T2M placed extra wheels on the rear end of the car.
Chassis details:
Strong flat composite chassis
Front & rear reinforcement frame
Removable anti-dust fabric protecting engine, battery pack and RC equipment
Double adjustable triangle rear & front (Tie-rods with inverted thread)
Lower aluminum triangle mount
Adjustable CNC aluminum motor mount
Full bearing transmission
Adjustable central Slipper
Front & rear differential with pinion in sealed casing
Anodized aluminum differential mount in two removable parts
High strength universal shaft drive
Final Tie-rods Transmission by articulated universal shaft drive
Adjustable direction tie-rods (inverted thread)
Aluminum hydraulic shock absorbers with double progressive effect springs
BrushlessController80Awaterproof*with fan andDEANS plug
*The vehicle's electronicelementsare resistant to wateror snowprojections. However, there is always a risk of damage In case of immersion: Read theprecautions for use
Transmitter:
Transmitter2.4GHz2channelswithergonomictrigger
Throttle and steering trims,dual rateandfailsafe function
Steering servowithmetalgears (9kg)
Requires 4AAbatteries for the transmitter(not included)
This all-terrain Racing TruckRacingis 1/10electricready-to-roll, a realdevoureroftrackand large spaces.Its robustchassis, powerfulbrushless motor, transmissionentirelyon ball bearingswithdifferentialgearsanduniversal jointstreated steel,suspensionslong-excursionwith hydraulic shocksand oversizedtires allowhim toplayat high speedtrapsterrain.
The radio receiverandwaterproofcontroller are housed ina protective casingtoallowPiratePuncherwithstandwaterprojectionsor snow*.The paintedand decoratedpolycarbonate bodyis bothrealisticand aggressive, in balance withthe exceptional performanceof the vehicle.The steeringis bothquick andaccuratethanks toa wheel-type transmitter/2.4GHzergonomictrigger. Attractive,fast, robust, well protectedandsuperequipped, thePiratePuncheris theradio-controlledvehiclebuilt foradventure!
* Waterproof:electronicsresistant to wateror snowprojections.Risk of damagein case ofcontinuous exposureor immersion. Read theprecautions.
Specifications:
Robust ribbed frame
Transmission entirely on ball bearings 4x2
Differential pinions
Treated steel driveshafts
Suspension with four independent wheels and double adjustable triangulations
Hydraulic dampers front / rear adjustable
Waterpoof speed controller and steering servo (3kg / m)
Protection case for ESC and RX
Painted and decorated polycarbonate body shell and decorated
Electric cross-country buggy 4wd RTR version ready to roll, with a radio set 2.4GHz, a battery 7.2V, a charger 500mAh Fighting range colors: choose among 4 colors of body!
Electric cross-country buggy 4wd RTR version ready to roll, with a radio set 2.4GHz, a battery 7.2V, a charger 500mAh Fighting range colors: choose among 4 colors of body!
Specifications:
Electric engine typ 550 15T
Electronic Speed controller (FW / BW / brake)
Central Reinforcement of blue anodized aluminum frame
Adjustable front plucking and camber by tierods with inverted tread
Adjustable Serif: 335 / 338mm
Universal joints in Steel treatet
Transmission completely on ball bearings
Differencial with conical pinion (FT / RE)
Hydraulic Shock dampeners with big constant volume including a thumb wheel with regulation of prestressed by the spring
Supports of shock dampeners front and rear multi-positions
Body low - profile in polycarbonate, painted and decorated
Monoblock aileron in polycarbonate with adjustable incidence
As evidenced byits adventurise lookandcolorfuldecoration,thisradio-controlled SniperPiratebuggy is highly efficient, robust andhas a trendylook. Its powerfulbrushless electric motormanagedby invertersand4x4transmissionentirelyon ball bearingswithfront and rear differentialsprovide it with a high-levelperformance. Thehydraulicsuspensionto four-wheel independentdoubletriangulationsanddampersallowit to passhigh-speedobstacles. The steeringis easily doneusing thesteering wheeltransmitter.
This small flying radio controlled model very fun look wide 180mm is powered by 4 micro coreless motors. Powerful, it is able to perform the craziest acrobatics.
Flips and loops are easily attainable at the touch of a button on the transmitter 4 channels proportional 2.4GHz.
The dramatic effect is amplified by a ramp lighting by LEDs: Front blue, red at the rear. These LEDs also allow to precisely visualize the orientation and direction of movement of the model.
A selector placed on the issuer can choose between Beginner or Expert modes. Once the Beginner mode grip acquired, we can move on Expert and enjoy higher performance.
Headless Function: activating this function, the model - whatever its orientation, moves in the direction of the handle of the issuer. Function subject to specific initialization and use.
Specifications:
Powered by 4 micro coreless motors
6 Axis Gyro
propellers Protectors
Lighting: front blue LED and red LED rear to precisely visualize the orientation and direction of movement of the model.
Power supply: included rechargeable Li-Po 1S.
Charging the battery model by USB cable
Transmitter 4-way proportional 2.4GHz
3D release button (looping / flip)
Flight Mode Selector: beginner or experFonction Headless: by activating this function, the model - whatever its orientation, moves in the direction of the handle of the issuer. Function subject to specific initialization and use.
The T2M Smart Guard Expert can carry out an enormous range of functions related to Electric Powered models and has been designed with ease of use as a prime objective. This Instruction Manual describes the scope of i-Meter and how to make it work for you.