Savox

Gearset Savox 0257 , METAL gearset

Gearset Savox 1256 , TITANIUM gear, with bearing

Gearset Savox 1257 , METAL gear, with bearing

Gearset Savox 1257 , TITANIUM gear, with bearing

Gearset Savox 1258 , TITANIUM gear, with bearing

Gearset Savox 1290 with bearing

The SV1261MG takes the performance of the SV1260MG and utilizing the same size case, increased the torque to a whopping 20kg/277oz/in while maintaining an impressive 0.095 second transit time. Primarily intended for air applications, this powerhouse can also be used in specialty cars, trucks, and boats and is intended to be used on direct 7.4V LiPo current.

Features:

• Metal gear train provide durability against heavy use
• Capable of HV operation
• All aluminum case provides strength and cooler operating temperatures

Specifications:

• Torque @ 7.4v: 20.0kg/277oz./in
• Torque @ 6.0v: 15.0kg/208oz./in
• Speed @ 7.4v: 0.095 sec/60 deg
• Speed @ 6.0v: 0.12 sec/60 deg
• Dimensions L x W x H (mm): 35 x 15 x 30.7
• Weight: 40.0g / 1.4 oz
• Operating Temperature: 14° - 122°F (-10° - 50°C)
• Running Current (no load): 120mA @6.0V, 180mA @7.4V
• Stall Current (at locked): 4000mA @6.0 V, 4700mA @7.4V
• Idle Current: 5mA @6.0V, 5mA @7.4V
• Wire Length: 250 ± 5mm
• Output Gear Spline: 25 Tooth
• Bearings: 2BB
• Operating Travel: 100° (1000 → 2000 µ second)
• Neutral Position: 1500 µ second
• Pulse Width Range: 800 → 2200 µ second
• Maximum Travel: Appx 165° (800 → 2200 µ second)
• Refresh Rate: 333 Hz
• Motor Type: Coreless

Replacement Gearset for Savox 1350

Savox 1357 Gear Set

Savox Digital SB2284SG High Voltage Brushless Motor Servo 20Kg@0.065 Sec- Steel Gear

Features:
- Leading edge digital servo technology
- High efficiency Brushless motor
- Accurate and fast response
- Super high resolution
- Aluminium case for improved motor cooling and total strength
- Ball beared
- Precision Steel gears

Technical specifications:
Servo Technology: Digital High Voltage
Input Voltage (V): 6.0V - 7.4V
Servo Type / Size: Standard
Motor Type: Brushless Motor
Gear Material: Steel Gears
Ball Beared: Ball Beared
Servo Case: Aluminium
Speed 60°/Sec @ 7.4V: 0.065 Sec/60°
Torque kg/cm @ 7.4V: 20.0 Kg/cm
Length (mm): 40.3 mm
Width (mm): 20.2 mm
Height (mm): 38.7 mm
Weight (g): 81 g
Connector type: JR
Spline size: 25T Spline

Savox SB-2283MG High Voltage Brushless Servo 10Kg@0.048 Sec- Steel Gear, Tail

Features:

- Leading edge digital servo technology
- High efficiency Brushless motor
- Accurate and fast response
- Super high resolution
- Aluminium case for improved motor cooling and total strength
- Ball beared
- Precision Metal gears

Technical specifications:

• Servo Technology: Digital High Voltage
• Input Voltage (V): 6.0V - 7.4V
• Servo Type / Size: Standard
• Motor Type: Brushless Motor
• Gear Material: Metal Gears
• Ball Beared: Ball Beared
• Servo Case: Aluminium
• Speed 60°/Sec @ 7.4V: 0.048 Sec/60°
• Torque kg/cm @ 7.4V: 10.0 Kg/cm
• Length (mm): 40.3 mm
• Width (mm): 20.2 mm
• Height (mm): 38.7 mm
• Weight (g): 76 g
• Connector type: JR
• Spline size: 25T Spline

This is the Savox SA-1231SG High Torque Steel Gear Digital Servo.

Features:

    Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears.
    Super light-weight.
    Coreless motor provides extremely high speed, incredible efficiency, and low power consumption.
    Extremely strong unique steel gears ensure long-life and durability.
    The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
    Our servos are totally green – from materials to production, these servos are environmentally friendly.
    Ideal for giant scale aircraft, monster truck, 1/8 scale.

• Dimensions(mm): 40.3x20.2x45.0
• Weight(g): 79.0
• Speed(@4.8V sec/60): .18
• Torque(@4.8V oz-in): 28 Kg.cm
• Speed(@6.0V sec/60): .14
• Torque(@6.0V oz-in): 32Kg.cm
• Gear: Unique Steel
• Bearing: 2BB
• Case: Full Aluminum
• 25 Tooth Spline
• Frequency: 250-333hz
• Pulse Width Frequency: 1520

The SA1258TG combines leading edge technology with super high 12-bit (4096) resolution and titanium and aluminum gears for one amazing servo! With titanium and aluminum gears, this servo is truly magical. Pushing 12kg  of torque and a blistering 0.08 transit time, this servo is redefining what an all-around servo should be capable of. This is a great upgrade to most comparably priced servos. The minimized backlash on the SA1258TG is helpful in plane wings for greater accuracy and less gear play.

Features:

• Combines leading edge technology with super high 12 bit (4096) resolution and titanium gears.
• Super light-weight.
• Coreless motor provides high speed, incredible efficiency, and low power consumption.
• Extremely strong titanium gears ensure long-life and durability.
• The aluminum case design not only looks good but also allows for cooler and smoother operating temps.
• Ideal for plane applications where a minimized backlash is needed.
• Dimensions(mm): 40.3x20.2x37.2
• Weight(g): 52.4
• Speed(@4.8V sec/60): .10
• Torque(@4.8V oz-in): 133.3
• Speed(@6.0V sec/60): 0.08
• Torque(@6.0V oz-in): 12kg
• Gear: Titanium & Aluminum
• Bearing: 2BB
• Case: Aluminum
• Frequency: 250-333hz
• Pulse Width Frequency: 1520

SAVÖX SB-2271SG DIGITAL SERVO BRUSHLESS MOTOR HIGH VOLTAGE STEEL GEARS (STANDARD SIZE)

Specifications Dimension :

• Height: 38,5 mm Dimension :
• Length: 40,3 mm Dimension :
• Weight: 69 gr Dimension :
• width: 20,2 mm
• Speed: 0.085 sec / 60° @ 6,0v
• Torque: 15.0 kg- cm @ 6,0v
• Type of case: Aluminium + plastic
• Type of gears: Steel gears
• Type of motor: Brushless motor
• Type of servo: Digital servo
• Type of spine: 25 tooth spine

SAVÖX SB-2270SG DIGITAL SERVO BRUSHLESS MOTOR HIGH VOLTAGE METAL GEARS (STANDARD SIZE)

Features:

Combines leading edge technology with super high 12 bit (4096) resolution and unique steel gears.
Super light-weight.
Brushless motor provides extremely high speed, incredible efficiency, and amazingly low power consumption.
The full aluminum case design not only looks good but also allows for cooler and smoother operating temps.
Our servos are totally green – from materials to production, these servos are environmentally friendly.
Ideal for Gyro and rudder servo only.

Specifications:

• Dimensions(mm): 40.3x20.2x38.5
• Weight(g): 66.0
• Speed(@4.8V sec/60): .055
• Torque(@4.8V oz-in): 41.7
• Speed(@6.0V sec/60): .045
• Torque(@6.0V oz-in): 69.4
• Speed(@7.4V sec/60): .032
• Torque(@7.4V oz-in): 97.2
• Gear: Metal
• Bearing: 2BB
• Case: Full Aluminum
• 25 Tooth Spline
• Frequency: 250-333hz

Savox SB-2282SG Digital High Voltage Brushless Motor Servo, Steel Gear

Features:

• Leading edge digital servo technology
• High efficiency Brushless motor
• Accurate and fast response
• Super high resolution
• Aluminium case for improved motor cooling and total strength
• Ball beared
• Precision Steel gears

Technical specifications:

• Servo Technology: Digital High Voltage
• Input Voltage (V): 6.0V 7.4V
• Servo Type / Size: Standard
• Motor Type: Brushless Motor
• Gear Material: Steel Gears
• Ball Beared: Ball Beared
• Servo Case: Aluminium
• Speed 60°/Sec @ 7.4V: 0.075 Sec/60°
• Torque kg/cm @ 7.4V: 23.0 Kg/cm
• Length (mm): 40.3 mm
• Width (mm): 20.2 mm
• Height (mm): 38.7 mm
• Weight (g): 81 g
• Connector type: JR
• Spline size: 25T Spline

SAVOX SB2292SG Gear Set incl. Bearings

The powerful "Monster" performance series from Savox utilize an all aluminum case, unique brushless motor and controller technology to boost power up to 35% over previous generation servos.

Features:

• Full Aluminum Case
• 3 Precision Ball Bearings.
• Unique steel gears

Specifications:

• Torque @ 6v - 22.0kg/305.5oz-in
• Torque @ 7.4v - 31.0kg/430.5oz-in
• Speed @ 6v - 0.085 sec/60 deg
• Speed @ 7.4v - 0.07sec/60 deg
• Dimensions L x W x H mm: 40.3 x 20.2 x 38.7
• Weight: 81g

Savox SC-1251MG Low Profile Digital "High Speed" Metal Gear Servo

The Savox SC-1251MG  is a Low Profile Digital Metal Gear Servo.
He combines leading edge technology, with super high 12 bit (4096) resolution and Metal Gears. With it's low profile case, the SC-1251MG is ideal for most 1/10 onroad, and 1/10 buggy applications.

Features:

• Light weight
• Coreless Motor provides high speed, incredible efficiency, and low power consumption
• The Aluminum Case design not only looks good but also allows for lower operating temperatures.
• Totally Green – from materials to production, these servos are environmentally friendly.
• Ideal as a steering servo for 1/10 surface applications, and as a aileron servo in gliders and airplanes that have thin wing profiles.

*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.

Specifications:

• Speed @ 6.0V: .09
• Torque @ 6.0V: 125 oz-in / 9.0 kg-cm
• Weight: 44.5g
• Bearing: Dual
• Type: Low Profile
• Gear: Metal
• Output Shaft: 25T Spline (Futaba)
• Case: Aluminum Heatsink
• Case Size (LxWxH): 40.8x20.2x25.4mm

The new SC-1256 standard size coreless digital servo is leading edge technology with super high 12 bits resolution and super strong Titanium Gears.

Features

• Extremely powerful with 20kg-cm torque at its size
• Extraordinarily light in weight, 20% lighter than its kind in the field
• The Coreless motor inside has brought the output performance to the top level - smoother, faster and more efficient
• The metallic case design not only exudes an exquisite style but helps the operating to stay cool and smooth.
• Super strong and precise-made Titanium metal gear form as the solid framework of our servo. Our design will make “Crumbled Gear” history.
• Ideal for TOC, Helis and cars.

Specifications:

• Dimensions: 40.3 x 20 x 37.2mm
• Weight: 52.4g
• Speed (sec/60°): 0.15
• Torque (kg-cm/oz-in): 20.0/277.6
• Gear: Titanium & Aluminium
• Case: Aluminium

Savox SC-1257TG Servo 10kg@0.07Sec Coreless Motor - Titanium Gear

Features:

Standard Size Coreless Digital Tail Servo - Leading edge technology with super high "12 bits (4096) resolution" and "Titanium Alloy Gears"
Extremely fast with 0.07 sec/60°speed at its size Extraordinarily light in weight, 20% lighter than its kind in the field
The Coreless motor inside has brought the output performance to the top level - smoother, faster and more efficient
Metallic case design not only exudes an exquisite style but helps the operating to stay cool and smooth.
Super strong and precise-made Titanium metal gear form as the solid framework of our servo.
Totally Green – from material to production, our servos are environmentally friendly.
Ideal for CCPM on 600 and 700 level heli, steering servo on 1/10th scale Buggy

Specifications:

• Dimensions: 40.3*20*37.2mm
• Weight : 52.4 gr
• Speed @6v : 0.07
• Torque : 10 kg.cm
• Gear: Titanium & Aluminium
• 2 ball bearings

This is the Savox SC-1258TG Standard Size Coreless Digital High Speed Titanium Gear Servo. The Savox SC-1258TG combines leading edge technology with super high 12 bit (4096) resolution and Titanium Gears.

Features:

•   Light weight
•   Coreless Motor provides high speed, incredible efficiency, and low power consumption
•   Super strong titanium gears
•   The Aluminum Case design not only looks good but also allows for lower operating temperatures.
•   Totally Green – from materials to production, these servos are environmentally friendly.
•   Ideal for CCPM on 600 and 700 class heli, steering servo on 1/10 scale Buggies.

Specifications:

•   Speed @ 6.0V: 0.08 sec/60°
•   Torque @ 6.0V: 166 oz-in / 12 kg-cm
•   Weight: 52.4g
•   Bearing: Dual
•   Type: Standard
•   Gear: Titanium and Aluminum
•   Case: Aluminum Heatsink
•   Output Shaft: 25T Spline (Futaba)

Standard Size digital servo - High Cost/Performance Rate. Ideal for 30-50 size airplane, gas servo for Helicopter, and as wheel steering on 1/8th Buggy.

Features:

•     Precise-made metal and plastic gears forms as the solid and strong framework of our servos.
•     Production and quality control of plastic component in our servos follow the standard of branded digital camera.
•     Totally Green – from material to production, our servos are environmentally friendly

Specifications:

•     Dimensions: 40.7 x 20 x 45.0mm
•     Weight: 42g
•     Speed (sec/60°): @4.8v 0.16, @6.0v 0.13
•     Torque (kg-cm/oz-in): @4.8v 6.2, @6.0v 6.5
•     Gear: Industrial Plastic
•     Case: Durable Plastic

Savox servo horns for Micro servos, e.g 0261, 0257,0254, also fit Align DS410-420

The new SA-1256 standard size coreless digital servo is leading edge technology with super high 12 bits resolution and super strong Titanium Gears.

The SA1256TG pushes 277.2 oz of torque and this servo is perfect for those who are looking for a minimized backlash to use in the wings of RC planes.
The SA-1256TG sports titanium and metal gears to keep things strong and running smooth.

Features:

• Combines leading edge technology with super high 12 bit (4096) resolution and Titanium gears.
• Super light-weight.
• Coreless motor provides high speed, incredible efficiency, and low power consumption.
• Titanium gears ensure long life and durability.
• The aluminum case design not only looks good but also allows for cooler and smoother operating temps.
• Ideal for plane applications where a minimized backlash is needed.

Specifications:

• Dimensions(mm): 40.3x20.2x37.2
• Weight(g):52.4
• Speed(@4.8V sec/60): .18
• Torque(@4.8V oz-in): 222.2 / 16kg/cm (4,8V)
• Speed(@6.0V sec/60): .15
• Torque(@6.0V oz-in): 277.7 / 20kg/cm (6,0V)
• Gear: Titanium & Aluminum
• Bearing: 2BB
• Case: Aluminum
• Frequency: 250-333Hz
• Pulse Width Frequency: 1520

Savox Servo SG-0211MG Digital servo 8kg@0.13sec, Metal Gear

Features:
- Leading edge digital servo technology
- High efficiency Coreless motor
- Accurate and fast response
- Super high resolution
- Aluminium case for improved motor cooling and total strength
- Ball beared
- Precision Metal gears

Technical specifications:
Servo Technology: Digital Low Voltage
Input Voltage (V): 4.8V - 6.0V
Servo Type / Size: Wing
Motor Type: Coreless Motor
Gear Material: Metal Gears
Ball Beared: Ball Beared
Servo Case: Aluminium
Speed 60°/Sec @ 6.0V: 0.13 Sec/60°
Torque kg/cm @ 6.0V: 8.0 Kg/cm
Length (mm): 30.0 mm
Width (mm): 10.0 mm
Height (mm): 36.0 mm
Weight (g): 29.0 g
Connector type: JR
Spline size: 21T Spline

This is the Savox SH-0254 Micro Digital High Torque Servo.

Features:

• Over-spec refined design out performs ordinary micro size servo
• The Aluminum Case design looks good and allows for lower operating temperatures
• Precision metal gears forms a strong and solid framework
• Strict production and quality control of plastic components
• Totally Green – from materials to production, these servos are environmentally friendly
• Idea for CCPM and Rudder on 450 class heli's and Park Flier Airplane's

Specifications:

• Speed @ 6.0V: 0.13 sec/60°
• Torque @ 6.0V: 54 oz-in / 3.9 kg-cm
• Weight: 15.8g
• Bearing: Single
• Type: Micro Plus
• Gear: Half Metal
• Case: Aluminum
• Output Shaft: 21T Spline
• Case Size (LxWxH): 22.8x12x29.4mm

This is the Savox SC-0255MG Micro Metal Gear Digital Servo.

Features:

Over-spec refined design out performs ordinary micro size servo.
The aluminum case design looks awesome and allows for cooler operating temperatures.
Precision metal gears form a strong and solid framework.
Strict production and quality control of plastic components ensures long life and reliability.
Our servos are totally green – from materials to production, these servos are environmentally friendly.
Ideal for CCPM applications in 450 size heli's and park flier planes.

Specifications:

• Dimensions(mm): 22.8X12.0X29.4
• Weight(g): 15.8
• Speed(@4.8V sec/60): .16
• Torque(@4.8V oz-in): 43.1
• Speed(@6.0V sec/60): .13
• Torque(@6.0V oz-in): 54.2
• Gear: Metal
• Bearing: 1BB
• Case: Aluminum
• 21 Tooth Spline
• Frequency: 200-250hz
• Pulse Width Frequency: 1520

Micro size digital servo with METAL gear and refined design that brings out extraordinary performance.

Ideal for CCPM and Rudder on 450 level heli and Park Fly Airplane.

Features

• Over-spec refined design overturns output limitation of ordinary micro size servo.
• The metallic body design not only exudes an exquisite style but helps the operating to stay cool and smooth from th beginning to the end.
• Production and quality control of plastic component in our servos follow the standard of branded digital camera.
• Professional and exquisite design and made gears form as the solid framework of our servos.
• Design will make “Crumbled Gear” history.

Specifications:

• Dimensions: 22.8 x 12 x 25.4mm
• Weight: 14g
• Speed (sec/60°): 0.09
• Torque (kg-cm/oz-in): 2.2/30.5
• Gear: Metal
• Case: Aluminium

Micro size digital servo with refined design that brings out extraordinary performance.

Ideal for CCPM and Rudder on 450 level heli and Park Fly Airplane.

Features:

• Over-spec refined design overturns output limitation of ordinary micro size servo.
• The metallic body design not only exudes an exquisite style but helps the operating to stay cool and smooth from th beginning to the end.
• Production and quality control of plastic component in our servos follow the standard of branded digital camera.
• Professional and exquisite design and made gears form as the solid framework of our servos.
• Design will make “Crumbled Gear” history.

Specifications:

• Dimensions: 22.8 x 12 x 25.4mm
• Weight: 12.5g
• Speed (sec/60°): 0.08/0.06
• Torque (kg-cm/oz-in): 1.0/ 1.2
• Gear: Metal /plastic
• Case: Aluminium

The Savox SH -0261 MG is a nano digital servo with a housing which is partially made of plastic and for a better cooling effect made of aluminum.

The gear is made of metal.

Savox is known for servos of very good quality at a premium price. The price / performance ratio is almost unbeatable.

The Savox SH -0261 is also ideal as a swash plate servo T -Rex T -Rex 250 or suitable 450th

The screws and servo arms (compatible with Futaba ) are naturally included.

Specifications:

• Nano Digital Servo
• Housing in part of aluminum
• Gearbox: Metal
• Bearing
• Response time at 4.8 V : 0.14 sec/60 degrees
• Response time at 6.0 V : 0.10 sec/60 degrees
• Force at 4.8 V: 18 Ncm
• Force at 6.0 V : 22 Ncm
• Weight : about 13.6 g
• Dimensions : approx 22.8 x 12.0 x 29.4 mm

The Savox SH -0262 MG is a nano digital servo with a housing which is partially made of plastic and for a better cooling effect made of aluminum.
The gear is made of metal.
Savox is known for servos of very good quality at a premium price. The price / performance ratio is almost unbeatable.
The Savox SH -0262 is also ideal as a tail servo T -Rex T -Rex 250 or suitable 450th
The screws and servo arms (compatible with Futaba ) are naturally included.

Specifications:

• Nano Digital Servo
• Aluminium Housing
• Gearbox: Metal
• Ball Bearing
• Response time at 4.8 V : 0.08 sec/60 degrees
• Response time at 6.0 V : 0.06 sec/60 degrees
• Force at 4.8 V: 8 Ncm
• Force at 6.0 V: 12 Ncm
• Weight : about 13.6 g
• Dimensions : approx 22.8 x 12.0 x 29.4 mm

This is the Savox SH-0264MG Super Speed Metal Gear Micro Digital Servo.

Features:

• Dual ball bearings in a micro servo? Yes, that is correct 2BB in a micro!!!
• Over-spec refined design out performs ordinary micro size servo.
• The metal case design looks awesome and allows for cooler and smoother operating temps.
• Metal gears form a solid framework for precise control and operation.
• Strict production and quality control of plastic components.
• Ideal for rudder servo for 250/450 class heli's, 1/16 scale surface vehicles, 3D aircraft, and park flyer airplanes.

Specification:

• Dimensions(mm): 22.8X12.0X25.4
• Weight(g): 15.0
• Speed(@4.8V sec/60): .08
• Torque(@4.8V oz-in): 11.1
• Speed(@6.0V sec/60): .06
• Torque(@6.0V oz-in): 16.7
• Gear: Metal
• Bearing: 2BB
• Case: Aluminum
• 21 Tooth Spline
• Frequency: 200-250hz
• Pulse Width Frequency: 1520

This is the Savox SH-1250MG Digital Metal Gear High Torque Servo. The Savox SH-1250MG is a metal gear, mini sized cyclic servo that is recommended for 500 class helicopter Cyclic applications.

Features:

• Coreless Motor provides high speed, incredible efficiency, and low power consumption.
• 10 Bit signal resolution for smooth movement.
• The aluminum case design not only looks good but lowers operating temperatures.
• Precision metal gears form a strong and solid framework.
• Supports digital and analog control signals.
• Ideal cyclic servo for 500 class helicopters and other aircraft that can benefit from a mini size metal gear servo.

Specifications:

• Torque @ 6.0V: 63 oz-in / 4.6kg-cm
• Speed @ 6.0V: 0.11/60°
• Voltage Range: 4.8-6.0V
• Weight: 29g
• Type: Micro
• Gear: Metal
• Case: Aluminum Heatsink
• Output Shaft: 25T Spline
• Case Size (LxWxH): 35x15x29.2mm

Savox SH-1257MG digital servo 2.6kg@0.07sec

This is the SH-1257MG Mini Digital Metal Gear Ultra High Speed Servo.

Features:

• Extremely fast with 0.07 sec/60°transit speed
• Extraordinarily light in weight, 20% lighter than servos with similar specs
• Coreless Motor provides high speed, incredible efficiency, and low power consumption
• The Aluminum Case design not only looks good but also allows for lower operating temperatures.
• Totally Green – from materials to production, these servos are environmentally friendly.
• Ideal as a tail servo on the 250, 450, 500 Size helis

Specifications:   

• Speed @ 6.0V: 0.07 sec/60°
• Torque @ 6.0V: 36 oz-in / 2.6 kg-cm
• Voltage Range: 4.8-6.0V
• Weight: 29g
• Type: Mini
• Gear: Metal
• Case: Aluminum Heatsink
• Output Shaft: 21T Spline
• Case Size (LxWxH): 35x15x29.2mm