OXY heli

OXY heli

 Oxy heli producing quality helicopters. Same source as Lynx, you can count on quality first

Products


  •  OXY2-FE Tail Shaft 15T

    OXY2-FE Tail Shaft 15T

    Description:

    OXY2-FE Tail Shaft 15T

    Packing List:

    • 1 x OXY2-FE - Tail Shaft 15T

    NOTE: Advised for head speed below 4500RPM

    SKU: SP-OXY2-029
    €8.99
    inc. VAT

     LOW STOCK
  • Boom Mount Lock Rod, Set

    Boom Mount Lock Rod, Set

    Boom Mount Lock Rod, Set

    Content:

    • 4 x Boom Mount Lock Rod
    SKU: SP-OXY3-021
    €3.49
    inc. VAT

     72HR STOCK
  • C Washer M2 Orange (20pcs)

    C Washer M2 Orange (20pcs)

    C Washer M2 Orange (20 pcs)

    SKU: SP-OXY3-133
    €6.50
    inc. VAT

     IN STOCK
  • Canopy Grommet, 4 PC

    Canopy Grommet, 4 PC

    Canopy Grommet, 4 PC

    Content:

    • 4 x Canopy Grommet
    SKU: SP-OXY3-065
    €2.59
    inc. VAT

     IN STOCK
  • Double Open-End Wrench 5.5 x 7mm

    Double Open-End Wrench 5.5 x 7mm

    Double Open-End Wrench 5.5 x 7mm

    Content:

    • 1 x Oxy3 - 3 Head System Main 5.5 x 7 Wrench Tool
    SKU: SP-OXY3-094
    €3.89
    inc. VAT

     72HR STOCK
  • Lynx Oxy 3 Helicopter Kit 255mm with Main Blades

    Lynx Oxy 3 Helicopter Kit 255mm with Main Blades

    Lynx Oxy 3 Helicopter Kit 255 mm with Main Blades

    Oxy 3 is the first helicopter in the Oxy Helicopter range.
    It is a 250 mm blade electric heli, with belt driven tail rotor, suitable for all micro servos.
    It is designed to handle high rpms (up to 4500), and in the future can grow with a stretch kit up to 280mm blades.
    Special upgrades will be available to run 3 or 4 blade heads, and a full fuselage to satisfy the requirements of all users

    Main features:

    • Heli designed for intense 3D performance:
    • Ultra rigid frame
    • Triple main shaft supports
    • Quality injection molded plastics
    • Lightweight, high visibility and high-end airbrush canopy from Canomod
    • Autorotation integrated into main gear hub

    Main rotor:

    • Semi rigid DFC head system (default Head) for precise performance and optional parts for easy FBL head system conversion.
    • Thrust bearings in main and tail grips
    • Oversize hardened spindle
    • Ball raced 120° CCPM serviceable swash plate
    • Swashplate linkages optimized geometry

    Tail system:

    • Belt drive tail (low parts count and low crash cost)
    • Innovative delta box tail boom with no requirement for boom supports
    • Tail optimized to minimize vibration and servo load at high tail speed
    • CNC tail pulley with pretension pulley system
    • Rigid carbon fiber 3mm diameter tail push rod for the increased tail control
    • Electronics & Power system
    • Battery tray fits a variety of battery packs 3s -4s (1300 to 1600 mAh) , 6s  (800 to 950 mAh) max length 75mm.
    • ESC support suitable for 35 to 50A ESC – suggested: CC Talon 35 – HW 40 – HW 50
    • Motor Options: Any motor for 300 to 450 class with 3.17 motor shaft and KV form 1900 to 4100 in function your battery set up (3 and 4S 3900 to 4100 KV – 6S 1900 to 2600 KV) – suggested EOX by Lynx 2214 to 2222 series – Scorpion 2213 to 2221 series – X Nova 2600 KV Tareq Edition.
    • Hardened Steel Pinion included in the kit: 11T and 14T 3.17mm Shaft (optional pinions: 10-11-12-13-14-15)
    • Suitable for most micro cyclic and tail servos – suggested combo:  4 x KST215MG – 3 x Servo King 995 + 1 x 995i – MKS 3 x D92A + 1 x 95i – BK Servo BK DS3001HV or any servo for 300 to 450 heli class.
    • Smart and clean electronic wiring set up.
    • Smart and protected FBL unit position – suggested FBL MSH Brain – IKON – Mikado mini VB / Neo Spartan – Micro Beast – AR7200

    Specifications:

    • Length: 530mm Height: 175mm Width: 80mm
    • Main rotor blade length: 255mm
    • Tail blade length: 47mm and 50mm in std kit for different tail authority need (suggested 47mm for Hard 3D Set-Up) – Black Color
    • Slant main gear: 140T 0.5 Mod
    • Wide head speed range: 3000 for sport flying a to 5000 for insane 3D
    • Tail gear ratio 3.933 (15T pulley) , optional Tail Shaft Pulley 14T for low Head Speed set up
    • Approximate RTF weight: 580g with 3s 1300mAh battery– suitable for 3.5 minutes of intense 3D at 4000rpm

    OXY3–255 KIT CONTENTS:

    1 x Oxy 3 Kit with DFC Head System.
    1 x Oxy 3 Canomod Canopy – Orange Yellow Schema
    1 x set ZEAL CF Main Blade 255mm – Carbon / White color
    1 x Oxy Heli by Lynx Service Towel Black
    1 x Swash Plate Lever Tools with Zero Pitch function
    1 x set Plastic Tail Blade 47mm, Black
    1 x set Plastic Tail Blade 50mm, Black
    1 x set Colored Tail Fin Sticker (Yellow – White – Orange)
    1 x CD Rom User Manual

    SKU: OXY3-255
    €246.00
    inc. VAT

     IN STOCK
  • Lynx Servo DS-895-HV Aluminum CNC Case - 3PC Set

    Lynx Servo DS-895-HV Aluminum CNC Case - 3PC Set

    Lynx Heli Innovations introduce the first Metal Case Servo for 180 CFX.

    Using the Lynx LX9004 Lynx Servo DS-895-HV, we build a special Cover and Rear Case in order to increase global Servo performance.

    After many pilot report and crash we decided to improve the standard Lynx DS-895-HV Servo with precision CNC Servo Cover and Rear Case.

    With this Metal Case, servo become more precise and robust in case of crash, gear mesh become very precise and cannot move as can upend on plastic case for wear or crash shock.

    The other important feature is the incredible heat-sink effect of CNC Rear Cover. Thanks a special design the motor case is in direct connection with Rear Cover keeping the motor temperature under dangerous values, increasing the global performance and the spam-life.

    Details and design combined with strength, durability, accurate CNC tolerances, finish, and most important lightweight and features, this Servo Case will increase Servo performance and assure flight precision.

    Lynx upgrade design: the new frontier of lightweight and high precision upgrade parts for micro helicopters.

     
    DS-895-HV SERVO FEATURES:

    • Direct replacement for the standard 180 CFX cyclic servo.
    • Servo Case Material: CNC Aluminum Cover and Rear Case with Techno Polymer Core.
    • Full Metal Gear Digital Precision Servo (Brass and Aluminum Alloy)
    • Input (V-in): 4.5 to 6 V
    • Frequency: 333 Hz
    • Neutral Point: 1500μs
    • Speed: 0.06 sec / 60° at 4.5V -  0.05 sec / 60° at 6 V
    • Stall Torque: 1.40 kgcm at 4.5V - 1.80 kgcm at 6 V
    • Dimension: 20.05 x 8.35 x 19.70 mm
    • Connector JST-1.50 (180CFX standard)
    • Weight including 150 mm cable connector: 6.50g
    • Output Gear support: Radial bearing 4x7 W2
    • Servo Arms: 4 type included + LX1097 Micro Servo Gear Saver Arm preinstalled at zero-degree pitch.

     Packing List:

    • 1 x Set of 3 x DS-895-HV Aluminum Case Servos.

    Note: The servo can be Silver-Blue or Silver-white color and this change does not affect servo's specification.

     

    SKU: LX1817
    €115.99
    inc. VAT

     LOW STOCK
  • MSH U Brain 2 - FBL

    MSH U Brain 2 - FBL

    Description:

    Micro Brain2 Flybarless System

    The next generation of Brain2 Flybarless systems is here!  Featuring 6 different hardware versions optimized for different applications, and robust enough to work in any setup from 180 to 900mm size models.

    Some of the exciting new features of the Brain2 system include:

    • 4x faster CPU with increased memory and flash
    • Logging capability (up to 50hz sampling rate with 10 simultaneous variables)
    • Built in Bluetooth for connecting wireless to iPhone, Android, or PC (Only on Brain2BT and Brain2BT HD)
    • In flight vibration logging
    • In flight event logging
    • New Rescue feature (auto learning/calibration)
    • iPhone, Android, or PC configuration/tuning applications
    • Jeti Transmitter integration

    Of course Brain2 includes the legendary flight performance of Brain1, full governor for Nitro/Electric, and support for most model types.  Brain2 is easily configured using the PC application, iPhone, or Android phone/tablets.

    Ultra Compact, Big Performance:

    Micro Brain2 brings big time flybarless performance, governor, logging, rescue, vibration analysis to the micro helicopter.  Ultra small and drop in compatible with models like the Blade 180CFX.  It takes your micro experience to the next level.

    New CPU 4x the performance, 4x storage, hardware acceleration.  Ready for years of feature enhancements.

    USB Power Capability for Configuration:

    No need to power the model up now to make quick configuration changes or to view flight logs.  Just plug in the USB port and the Brain2 powers up, with an integrated diode to prevent powering the servo power bus (no need to take the blades out of the blade holder!)..  Quick changes have never been so easy.

    Event Logging:

    Brain2 is always recording the major events during your flight.  This lets you go back and review vital information to confirm proper operation or see valuable information to help with troubleshooting

    Vibration Logging, Analysis, and Playback:

    Troubleshooting mechanical problems has never been easier.  Brain2 can play back your entire flight showing you vibrations as the model moves through maneuvers.  This gives you a greater understanding of the health of the model and points you to the motor, head, or tail sections.  Vibration logging can save endless hours of trial and error searching and give you peace of mind that the model is in good health.

    Logs:

    Brain2 takes logging and data collection to a new level of capability.  Record up to 10 parameters for each flight and download them later for review.

    Brain2 provides access to all the critical data parameters visible to the flybarless unit.  Some examples include: Voltage, receiver packets, throttle out, RPM, vibration, TX inputs, aileron/elevator rates, tail rate, pitch and more.

    This information is incredibly useful for tuning governors on nitro or electric, verifying that your BEC or Rx LiPo is performing how you expect, checking if your radio is working well, seeing the real roll/flip/piro rates, etc.

    The logging memory capacity is large enough to hold several flights of information so after a flying session, you can always download the logs for viewing later, or for sharing with other users.

    Rescue:

    New rescue feature saves the model from any orientation, stabilizing it to hover and adding pitch to avoid any impact with ground. New rescue is a great tool for beginners or for pilots experiencing new manouvers. - See more at: http://www.msheli.com/en/MSHeli-Protos-Flybarless-System/brain-2-flybarless#sthash.p19kaz49.dpuf

    The new Brain2 rescue feature saves the model from any orientation, stabilizing it into a hover and adding pitch to avoid impact with the ground. This is an amazing tool for beginners or those working on new maneuvers where there is a higher risk of loss of orientation and control.

    Use your phone or tablet to configure and tune

    Ditch your laptop and use the iPhone or Android application to configure your Brain2 flybarless system.  Have instant easy access to the entire system at the field or on the bench to quickly change parameters. MSH Bluetooth module is required for Brain2 systems that do not have integrated Bluetooth.

    Configuration Wizard:

    The Brain2 configuration wizard gets you flying fast with default configurations tuned for each model size.

    Governor:

    Pull every ounce of performance from your model with Brain2's advanced built in governor.  Fine tuned from years of continued development.  Utilize the built in logging to tune the governor even further, even if your ESC or Nitro has no native logging ability.  Brain2 captures the data you need.

    Flight Counters:

    Track the number of flights of the model, but also track the life of individual components, like gears and belts.

    Advanced Tuning:

    Tweak to your hearts content. Brain2 gives you direct access to every tunable parameter in the system. Each parameter includes pop-up instructions to help inform you of how the parameter works.  As your flying advances, now so can your ability to tune to your taste.  Get every ounce of performance from your machines.

    SKU: MSH51640
    €109.99
    inc. VAT

     72HR STOCK
  • OXY 3 - Tail Case Bearing Block Assembly

    OXY 3 - Tail Case Bearing Block Assembly

    OXY 3 - Tail Case Bearing Block Assembly

    Content:

    • 1 x Oxy3 - Tail Case Bearing Block
    SKU: SP-OXY3-030
    €8.89
    inc. VAT

     LOW STOCK
  • Oxy 3 (255) RED Helicopter Combo with Motor,ESC,Zeal blades,Canomod canopy,Lipo

    Oxy 3 (255) RED Helicopter Combo with Motor,ESC,Zeal blades,Canomod canopy,Lipo

    Oxy 3 Helicopter Kit (OXY3-255) with Zeal blades, Canomod canopy, made by Division of Lynx, Full CNC aluminum and carbon fiber kit w/ DFC Head
    Motor EOX 2214 V2 - 4100KV Black Edition
    ESC 40A Hobbywing OEM OXY3

    Free lipo pack from Optipower or Gens 3s or 4s( specify your wish)

    This Version includes:

    • Kit - FG Canomod Canopy
    • Main Blade CF 255 Zeal - Tail Blade plastic 47 and 50 mm
    • Motor EOX 2214 - 4100 KV
    • ESC Hobbywing 40A Platinum

    Main features

    • Heli designed for intense 3D performance:
    • Ultra rigid frame
    • Triple main shaft supports
    • Quality injection molded plastics
    • Lightweight, high visibility and high-end airbrush canopy from Canomod
    • Auto-rotation integrated into main gear hub

    Main rotor

    • Semi rigid DFC head for precise performance
    • Thrust bearings in main and tail grips
    • Oversize hardened spindle shaft
    • Fixable swash plate Ball raced 120° CCPM (can be disassembly and repair)
    • Optimized geometry swashplate linkages

    Tail system

    • Belt drive tail (low parts count and low crash cost)
    • Innovative delta box tail boom with no requirement for boom supports
    • Optimized tail case and tail rotor design to minimize vibration and servo load at high tail speed
    • CNC tail pulley with pretension pulley system
    • Rigid 3mm diameter carbon fiber tail push rod for good tail control

    Electronics & Power system

    • Battery tray fits a variable battery packs from 3S -4S (1300 to 1600 mAh) , 6S  (800 to 950 mAh)  max length 75mm
    • ESC support suitable for 25 40A ESC and more
    • Kit Motor: EOX 2214 Black Edition 4100KV 3.17mm Shaft suitable for 3s and 4s battery packs
    • Hardened Steel Pinion included in the kit: 11T suitable for 4s 4100 kV motors and 14T suitable for 3s 4100 kV motors(optional pinions: 12-13-15)
    • Suitable for most micro cyclic and tail servos
    • Smart and clean electronic wiring set up

    Specifications

    • Length: 530mm, Height: 175mm, Width: 80mm
    • Main rotor blade length: 255mm
    • Tail blade length: 47mm
    • Slant main gear: 140T 0.5 Mod
    • Wide head speed range: 3000 for sport flying a to 4500 for insane 3D
    • Tail gear ratio 4.214 (14T pulley) for 3800 4500rpm (optional 13T pulley available for low head speed 3000-4000 rpm)
    • Approximate RTF weight: 580g with 3s 1300mAh battery suitable for 3.5 minutes of intense 3D at 4000rpm
    SKU: OXY3KIT1
    €349.00
    inc. VAT

     72HR STOCK
  • Oxy 3 Sport Combo with Motor,ESC,Servos ,blades, Free Carry bag

    Oxy 3 Sport Combo with Motor,ESC,Servos ,blades, Free Carry bag

    Oxy 3 -255 Helicopter Kit Super combo set including:

    OXY 3 Sport kit with Lynx blades, Canomod canopy, made by Division of Lynx, Full CNC aluminum and carbon fiber kit w/ DFC Head
    1x Motor Scorpion 2221-6
    1x ESC 40A Heli version, Hobbywing

    3 x Micro Servo Savox 0255 cyclic servos
    1 x Micro Servo Savox Tail 0262/0257 servo
    1 x Lipo alarm device
    1 x Gift-Helicopter Carry Bag 250-450 size
    1 x Lipo Optipower or gens ace 3S 1300( max 75mm long)

    Main features

    • Heli designed for intense 3D performance:
    • Ultra rigid frame
    • Triple main shaft supports
    • Quality injection molded plastics
    • Lightweight, high visibility and high-end airbrush canopy from Canomod
    • Auto-rotation integrated into main gear hub

    Main rotor

    • Semi rigid DFC head for precise performance
    • Thrust bearings in main and tail grips
    • Oversize hardened spindle shaft
    • Fixable swash plate Ball raced 120° CCPM (can be disassembly and repair)
    • Optimized geometry swashplate linkages

    Tail system

    • Belt drive tail (low parts count and low crash cost)
    • Innovative delta box tail boom with no requirement for boom supports
    • Optimized tail case and tail rotor design to minimize vibration and servo load at high tail speed
    • CNC tail pulley with pretension pulley system
    • Rigid 3mm diameter carbon fiber tail push rod for good tail control

    Electronics & Power system

    • Battery tray fits a variable battery packs from 3S -4S (1300 to 1600 mAh) , 6S  (800 to 950 mAh)  max length 75mm
    • ESC support suitable for 25 40A ESC and more
    • Kit Motor: EOX 2214 Black Edition 4100KV 3.17mm Shaft suitable for 3s and 4s battery packs
    • Hardened Steel Pinion included in the kit: 11T suitable for 4s 4100 kV motors and 14T suitable for 3s 4100 kV motors(optional pinions: 12-13-15)
    • Suitable for most micro cyclic and tail servos
    • Smart and clean electronic wiring set up

    Specifications

    • Length: 530mm Height: 175mm Width: 80mm
    • Main rotor blade length: 255mm
    • Tail blade length: 47mm
    • Slant main gear: 140T 0.5 Mod
    • Wide head speed range: 3000 for sport flying a to 4500 for insane 3D
    • Tail gear ratio 4.214 (14T pulley) for 3800 4500rpm (optional 13T pulley available for low head speed 3000-4000 rpm)
    • Approximate RTF weight: 580g with 3s 1300mAh battery suitable for 3.5 minutes of intense 3D at 4000rpm
    SKU: OXY3combo
    €439.00
    inc. VAT

     72HR STOCK
  • Oxy 3 Tareq Edition Super combo with Motor,ESC,Servos ,blades, Free Carry bag

    Oxy 3 Tareq Edition Super combo with Motor,ESC,Servos ,blades, Free Carry bag

    OXY 3 Tareq Edition Lynx Heli Innovation Super combo set  comes with 4 or 6s versions, and including:

    4S version for Sport and 3D flyers

    OXY 3 Tareq Edition with Zeal blades, Canomod canopy.
    Motor Scorpion HKv2 2221-6
    ESC 40A Heli version, Hobbywing

    3 x Micro Servo SAVOX 0255 or KST
    1 x Micro Servo Savox Tail 0262/0257/KST
    1 x Lipo alarm device
    1 x Helicopter Carry Bag
    1 x Lipo Optipower or gens ace 4S 1300Mah

    6S version is for crazy pilots only, be sure you understand this Insane Setup

    OXY 3 Tareq Edition with Zeal blades, Canomod canopy.
    Motor Scorpion HKv2 2221-2010
    ESC 40A Heli version, Hobbywing

    3 x Micro Servo sAVOX 0255 /kst
    1 x Micro Servo Savox Tail 0262/0257 servo/kst
    1 x Lipo alarm device
    1 x Helicopter Carry Bag
    1 x Lipo Optipower or gens ace 6s 900-1000mah

    SKU: OXY3TEcombo
    €599.00
    inc. VAT

     72HR STOCK
  • OXY 3 TE - Tail Case Bearing Spare Set

    OXY 3 TE - Tail Case Bearing Spare Set

    OXY3 TE - Tail Case Bearing Spare Set

    SKU: SP-OXY3-156
    €7.50
    inc. VAT

     72HR STOCK
  • OXY 5 Helicopter Kit without No Blades

    OXY 5 Helicopter Kit without No Blades

    Like many of you already know, OXY HELI is part of the Lynx Heli Innovations Upgrade Heli Division own by Luca Invernizzi. After over 10 years of incredible upgrade experience and 5 years since the first OXY 3 changed how people looked at micro helicopters, now is time for the first BIG OXY HELI, the OXY 5.

    Thanks to the feedback from the upgrade market, we gained our unique consolidated design, manufacturing practices, access to the best materials, a huge team of enthusiasts and test pilots from all over the world, and a powerful distributor network. Lynx Heli decided to meet the markets demand for high performance helicopters by forming Oxy Helicopters. Open collaboration with the dealers and customers in the community allows us to have the best designs possible.

    Our Philosophy: Top Performance and Quality First!

    There is a market for high performance helicopters. Customers now are much more detailed and higher skill levels than past years and look for a special quality in a Heli. For this reason, Luca Invernizzi decided to invest in OXY HELI, even when the RC heli business is shrinking. Luca believes in his knowledge, idea driven form, his heli passion and sometimes just his obsessions.

    Oxy Helicopters will have top-class, explosive performance, fitting for the best 3D pilots in the world. They will also appeal to sport pilots looking for a high quality, versatile product which is simple to build, maintain and set-up. With clean lines and is crash tolerant. The Oxy Helicopter project is the synthesis of years of ideas. We keep our helicopters simple, robust, light, and of a distinctive style.

    OXY HELI in 2014 introduced the first OXY 3 changing the micro helicopter prospection. Now after 5 Years finally the first BIG OXY is here, the OXY 5!

    Two year ago, in 2017, Rasmus Jakobsen and Luca started the first tests of the actual OXY5.

    Rasmus traveled to the Lynx Factory in Vietnam and within a few weeks, they had the first 200 flights done. But that was just the beginning! You know Luca! Lots of ideas and the desire to make something special and sexy every single time.

    In the beginning he was looking for a 500 Class Heli, then it became 600. In the end, after dozens of prototypes, a completely different kind of OXY R&D, they ended with something unique.

    The OXY 5 is unique in many aspects; design first, but the aspect that stands out the most is the super wide range of the 500 class blade size options.

    Thanks to Luca's design and mass distribution, the OXY 5 can spin from 500 to 570 mm blades, covering everything the 500 class has to offer. With the Tail Ratio, Motor, Battery ESC and Servos format. You can choose to match to the function of your needs. Giving you the option to choose what you like and not just what someone else likes.

    Let’s talk about the OXY 5 specialty design features!

    Frame System:

    Everybody follows the wide frame philosophy for some mechanical reason, but Luca chose the opposite direction. Super slim upper main frame (only 35mm inner frame) with a necessary lower enlarged frame for different battery needs. To define that vision, he must overcome many vibration and resonance, but in the end the result is an astonishing rigid, strong, lightweight and clean looking frame. Every assembly situation was revised many times. Reduction of screws count, overlapping layer components, smart battery tray with mechanical lock, elimination of main shaft collar with a sliding lower bearing block system yeilded a simple adaptive design. Following the user manual, you can easily get all the wiring inside for a clean pro-build, because the details are so important when we love what we fly.  We should also empathize our R&D heli design approach: We test our heli’s not only in the air, but our process also follows the after the crash analysis to minimizing the damage by reducing the impact energy, saving the core of the heli. Crashes are an unplanned event we all have unfortunately, but it is part of the game. Heli must be designed to fly with perfection, but be quick to repair without a huge expense. Crashes are part of our game, “no pain, no gain”. As they say, not crashing? You’re not pushing for improvement. Anything can be damage, but we truly believe that an adaptive design method can like in the car industry, define what we want to save, and form a pilot experience. Luca chose the upper frame with all the expensive electronics to be saved. Sacrifying other areas that are easy and low-cost to replace.

    Main Gear and Main Pulley System:

    Looking for efficiency and simplicity, OXY 5 has a single stage transmission with 110 Mod 1mm CNC Main Gear, 12T Pinion in the kit with many other optional pinions as options. The Main Pulley 84T with HDT 3M Tail Belt Transmission and metal frame tail pulley to cancel nasty EDM (electrostatic) issue.

    Head System:

    Luca’s experience show him that a solid head system with 10mm hollow shaft, 8mm hollow spindle, serrated center hub and interchangeable adaptive dampening system was the solution to pursuit. This was a milestone to pass. Something present in any 3D Heli, the pitch mechanical aberration, or deviation error from Zero to full negative and positive collective. Thanks to a different cinematic simulation OXY R&D ended with special, simple but mathematically proved geometry that reduce the mechanical aberration to only 0.25 degree pitch with 28 degree maximum travel.  There’s no need any more to play with FBL end points to have the same exactly negative and positive pitch, giving the OXY 5 a precision and crispy head feeling. Exactly what the new 3D generation pilot are looking for, agility and precision in one single spot!

    Tail System:

    Here we come with OXY’s specialty : Tail Performance. We all know that when we fly, if we cannot thrust 100% in the tail authority or precision, 50% of our mind is lost just thinking: Which move I can do next? If I do this, will I lose the tail, just like before?

    The tail is so, so important on the last generation of Heli design. It is where every company tries their best to improve what today, feels perfect. Improvements don’t have a limit. OXY introduces in each Heli from the small OXY 2 up to the new OXY 5, design and features that assure the best tail efficiency with the simplest design as possible. Bigger count tail pulley with the best revolution efficiency, super low belt wearing, tail belt tensioner, Delta rod angles, reduced mechanical travel aberration, double pinned Pitch Slider and 6mm Tail Shaft are just some of the different mechanical OXY 5 tail solutions.

    After reading all that, you probably normally thinking it’s enough, but it isn’t. Many other detail and features are inside the OXY 5, many personal Luca “touches”. It’s hard or too long to list them all here, but we are sure. Those who will get one, will love it!

    Technical and standard specs:

    • Main Blade Length:             Any from 500 to 575mm
    • Main Grip Clamping:           M4 / 10 and 12mm Root.
    • Tail Blade Length:               Any from 85mm to 105mm.
    • Tail Blade Clamping:           M3 / 5 mm Root.
    • Standard Main Gear:           110T Module 1mm.
    • Standard Pinion:                  12T – (Optional 11-13-14 Sold separate from basic kit)
    • Standard Main Ratio:           9.166
    • Standard Main Pulley:         84T
    • Standard Tail Pulley:           19T (Optional 18-20 Sold separate from basic kit)
    • Standard Tail Ratio:             4.42
    • RTF Approx. Weight:          2900g (including 6s battery, may vary by battery brand).
    • Motor size:                           4015, 4020, 4025, 4030, 4225. Shaft: 6mm – 20mm to 25m long.
    • 6S Max Battery Size:           L150 x H55 x W50mm.
    • 12S Max Battery Size:         L270 x H43 x W50mm
    • Servo Size:                           Kit comes: Std. Size Cyclic Servo and Std. or Mini Tail Servo
    • (Optional: Mini Size Cyclic Servo Supports Sold separate from basic kit)
    • ESC:                                      100 to 150A
    SKU: OXY5-NB
    €570.00
    inc. VAT

     IN STOCK
    NEW
  • OXY Heli Carbon Plastic Main Blade 190mm

    OXY Heli Carbon Plastic Main Blade 190mm

    OXY Heli Carbon Plastic Main Blade 190mm

    SKU: SP-OXY2-045
    €6.80
    inc. VAT

    NEW
  • OXY Heli Oxy 4 380 Max Electric Helicopter Kit-No blades

    OXY Heli Oxy 4 380 Max Electric Helicopter Kit-No blades

    Oxy Heli's Oxy 4 Max is a purpose built 380 size helicopter. Through the design process, special attention to detail focused on quality, precision, design & flight characteristics were all at the top of the charts. The task to complete an incredible & revolutionary 380 size heli was not easy, but after extensive amounts of testing the Oxy 4 Max 380 is born! The lightweight platform of the Oxy 4 Max allows a wide flight envelope, and wide choice of electronics choices as well. While the Oxy 4 is a completely new size & design, some standard Oxy features are found within the Oxy 4 Max, and listed below.

    Oxy 4 Max Features:   
    Oval Boom without support
    Tail belt drive, with One Way Tail Driven for the best Over Speed and Autos
    Optimized Head geometry
    Optimized Tail geometry
    Two piece landing skid system
    Ultra-Rigid Main Frame Carbon / Aluminum – Black Matte Finish with a Triple Bearing Block
    FBL Head System
    “Muscle”  Canopy profile, modern, skinny, aggressive and sexy, with an incredible fly visibility, large Battery Protection and special shape to reduce pitch drag effect
    Innovative Main Shaft Jesus Bolt for easy and quick assembly and repair operation 

    Includes:  
    Oxy 4 Max Kit
    70mm Tail Blades
    (1) 19T Pinion
    Swashplate Leveling Tool
    Needed to Complete:  
    (3) Micro Cyclic Servos
    (1) Mini Tail Servo
    (1) Set of 380 class Main Blades
    (1) Flybarless Gyro System
    (1) 2820-3215 Size Motor (890-1000kV)
    (1) ESC (60A Minimum)
    (1) Radio System
    (1+) 22.2 V 6s 1800-2200mAh LiPo Battery
    (1) Battery Charger
    Misc. Building Tools

    SKU: OXY4MAXNB
    €299.00
    inc. VAT

     IN STOCK
  • OXY Heli OXY3 - Belt Pulley Guide Set

    OXY Heli OXY3 - Belt Pulley Guide Set

    Includes:

    2 x Oxy3 - Belt Pulley Guide

    SKU: SP-OXY3-022
    €6.00
    inc. VAT

     IN STOCK
  • OXY Heli OXY3 - Break Away Canopy Plate

    OXY Heli OXY3 - Break Away Canopy Plate

    Includes:

    2 x Oxy3 - Break Away Canopy Plate

    SKU: SP-OXY3-051
    €2.50
    inc. VAT

     LOW STOCK
  • OXY Heli OXY3 - Servo Linkage set of 2

    OXY Heli OXY3 - Servo Linkage set of 2

    Includes:

    12 x 4mm Plastic Linkage Ball
    6 x Servo Rod M1.6x18

    SKU: SP-OXY3-037
    €9.00
    inc. VAT

     IN STOCK
  • OXY Heli OXY3 - Tail Bell Crank

    OXY Heli OXY3 - Tail Bell Crank

    Includes:

    1 x Oxy3 - Tail Bell Crank

    SKU: SP-OXY3-033
    €7.90
    inc. VAT

     IN STOCK
  • OXY Heli OXY3 - Tail Boom

    OXY Heli OXY3 - Tail Boom

    Includes:

    2 x Oxy3 - Tail Boom

    SKU: SP-OXY3-047
    €12.50
    inc. VAT

     IN STOCK
  • OXY Heli OXY3 - Tail Pitch Slider

    OXY Heli OXY3 - Tail Pitch Slider

    Includes:

    2 x Bushing 2x3x2
    2 x Link Control
    2 x Bottom Cup Screw M2x5

    SKU: SP-OXY3-028
    €3.50
    inc. VAT

     IN STOCK
  • OXY Heli OXY3 - Tail Shaft 14T

    OXY Heli OXY3 - Tail Shaft 14T

    Includes:

    1 x Oxy3 - Tail Shaft 14T - preassembled
    4 x Fine adjust shim

    SKU: SP-OXY3-029
    €8.50
    inc. VAT

  • OXY Heli OXY3 -Tail Rotor Hub Spare Part

    OXY Heli OXY3 -Tail Rotor Hub Spare Part

    Includes:

    1 x Tail Hub
    2 x Oring 2x1
    2 x Shim 3x4x0.1
    2 x Washer
    2 x Hex Cup Screw M2x5
    2 x Bottom Screw M2x10
    1 x Set Screw M3x3

    SKU: SP-OXY3-024
    €6.99
    inc. VAT

     IN STOCK

Manufacturers