New Arrivals
Team Black Sheep Crossfire micro V2 FPV receiver
A super-tiny, super-lightweight UHF long range receiver. Perfect match for your mini- or micro-quads as well as 4ch aircraft. It now comes with a servo-adapter board for high-current servos and 4ch PWM connectivity (requires software update to your Crossfire TX!) Weight: 3.32g(V2) SIze:4x1.4x0.95(cm) Includes 1x TBS Crossfire Micro Receiver
|
€53.99
Inc. VATTBS Sixty9 Unifier 1000mw VTX and Crossfire Receiver
What could be better than the best Crossfire receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all. Introducing the TBS Crossfire Sixty9, a VTx and RC receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Crossfire side. Mounting holes are 20x20, but we do incldue adapters for your 30x30 stacks, and a plastic case for mounting the unit to your frame, without any stacking necessity. Outputs 2x CRSF + 2x PWM (or 6x PWM) directly to your FC. The main JST-SH connector connects to your flight controller and video camera (or also FC for those that like the FC-OSD). FEATURES:
SPECIFICATIONS |
€55.00
Inc. VATTBS Crossfire TX lite-Long range R/C TX module
The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link. Remote control links, however, are tasked with much more than range. Latency, telemetry, robustness against interference, connectivity with smart devices, ease of use and the overall finish are too often sacrificed for that last bit of range. The Crossfire comes with plenty of range, and uses that margin for additional functionality and reliability. A bright future for FPV lies ahead :) As a modern R/C link, it has telemetry built in. Two-way communication opens up new possibilities. From updating your firmware, setting your video transmitter channel to adjusting flight control parameters such as PIDs. Adaptive bandwidth controls the speed of transmission or optimizes for ultimate range. CRSF is a proprietary TBS communication protocol between the Crossfire and R/C and Flight Control. It provides ultra-low latency with incredible bandwidth (3x faster, 6x more data than any comparable protocol!). With such tight integration, the TBS Crossfire is the logical choice for anyone flying Betaflight, KiSS or ArduPilot/Pixhawk platforms. Features:
Technical specifications:
Package includes:
|
€189.00
Inc. VATTBS Crossfire Micro TX V2 STARTER Set Long range,Low Latency
The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diversity, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at a killer price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price. Features:
Package includes
|
€199.99
Inc. VATTBS CROSSFIRE NANO RX (SE) receiver includes the TBS Immortal-T V2 Antenna
TBS Crossfire nano RX for people who want to save space and solder. Full range, designed specifically for mini- and micro-quads! The Special Edition (SE) includes the TBS Immortal-T V2 Antenna! TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the smallest size of any receiver in the industry (yes, it’s smaller than the XM+). SPECIFICATIONS
INCLUDES
|
€35.90
Inc. VATTeam Blacksheep TBS Gemini Crash Kit
Replaces the most frequently damaged components in a crash. Good for a dozen or so serious crashes! Contains:
|
€7.00
Inc. VATTBS Triumph 5.8GHz CP FPV antennas RP-SMA (set of 2pcs)
TBS Triumph 5.8GHz CP FPV antennas RP-SMA (set of 2pcs) Designed by Video Aerial Systems LLC (IBcrazy) and Team-BlackSheep While other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) and Team-BlackSheep have come together to re-invent how the modern 5.8 circular polarized antenna should look and perform. In our quest for the cleanest video signal and best range possible, we have ventured way beyond the traditional bent lobes of Cloverleaf designs and invested significant time and effort in finding the best antenna designs known to man, and modifying them specifically for FPV use. After extensive design and testing, we focused on making sure the Triumph was durable enough to take even the toughest of abuse. After many test flights and extensive feedback from our pilots, we decided to use a double-jacket heavy duty Semi-Rigid cable and tin-plated connectors. For protection we created a special foam-filled and ultrasonic welded enclosure to secure the antenna from inbound trees, or other objects Features:
Technical Specifications:
Package Contents:
|
€39.90
Inc. VATTBS Triumph 5.8GHz CP FPV antennas SMA (set of 2pcs)
TBS Triumph 5.8GHz CP FPV antennas SMA (set of 2pcs) The revolution in circular 5.8 GHz technology. While other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) and Team-BlackSheep have come together to re-invent how the modern 5.8 circular polarized antenna should look and perform. In our quest for the cleanest video signal and best range possible, we have ventured way beyond the traditional bent lobes of Cloverleaf designs and invested significant time and effort in finding the best antenna designs known to man, and modifying them specifically for FPV use. After extensive design and testing, we focused on making sure the Triumph was durable enough to take even the toughest of abuse. After many test flights and extensive feedback from our pilots, we decided to use a double-jacket heavy duty Semi-Rigid cable and tin-plated connectors. For protection we created a special foam-filled and ultrasonic welded enclosure to secure the antenna from inbound trees, or other objects Features:
Technical specifications:
Package contents:
|
€39.90
Inc. VATTBS TRIUMPH-STUB 5.8GHz CP FPV antennas SMA (set of 2pcs)
TBS TRIUMPH-STUB 5.8GHz CP FPV antennas SMA (set of 2pcs) The ultimate FPV racing antenna just got better. With lower weight and even better durability, the TBS Triumph Stub has it all. While other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) and Team-BlackSheep have come together to re-invent how the modern 5.8 circular polarized antenna should look and perform. In our quest for the cleanest video signal and best range possible, we have ventured way beyond the traditional bent lobes of Cloverleaf designs and invested significant time and effort in finding the best antenna designs known to man, and modifying them specifically for FPV use. After extensive design and testing, we focused on making sure the Triumph was durable enough to take even the toughest of abuse. After many test flights and extensive feedback from our pilots, we decided to use a double-jacket heavy duty Semi-Rigid cable and tin-plated connectors. For protection we created a special foam-filled and ultrasonic welded enclosure to secure the antenna from inbound trees, or other objects Features:
Technical specifications:
Package contents:
|
€39.90
Inc. VATRadioMaster - RP1 2.4ghz ExpressLRS ELRS Nano Receiver V2
Please consult Local Telecom regulations when using this item! The RadioMaster RP series of receivers are designed with size, ease of use and range in mind. Utilizing ExpressLRS 2.4ghz Open-source firmware the RP series of nano receivers deliver features and range today pilots have come to expect. Developed around the ESP8285 MCU and SX1280IMLTRT RF Chip the RP series offer Lora and FLRC 2.4ghz RF links offering incredible range and low latency. With Wifi built in FW updates can be done on your craft without the need to remove the receiver. Binding can be done using a bind phrase meaning no more bind plugs or fiddly button presses while trying to plug in your battery. What’s new on the RP1 Improved PCB design is better for heat dissipation. Specifications:
|
€24.00
Inc. VATHobbywing Multifunction LCD Program Box PRO - G3 #HW30502002
This multifunction program box is for programming HOBBYWING brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use. Thanks to built-in OTA programming feature through Bluetooth™, you can now use this device with IOS devices. This multifunciton LCD program box is applicable for the following HOBBYWING products: Platinum series of brushless aircraft ESCs, XeRun & EzRun MAX series (V2.0 and later), Platinum and SEAKING PRO series. This device also work with some ESC of QUICRUN series.
Specifications
(a separate battery is needed for powering this program box when ESC has no built-in/external BEC)
|
€43.99
Inc. VATHyperion Heated Transmitter Winter Glove 5V usb, #HP-TXGLOVE-U
Don't freeze your fingers off when flying in winters with the new the Hyperion Heated Transmitter Glove 5V, USB Powered). The new Hyperion transmitter glove now comes with a built-in heating element that works off 5V so you can plug in any USB power bank or source (2.1A) needed, and enjoy flying without freezing your fingers. This is a must have item for low temperature and winter flying season. The Hyperion transmitter glove is designed to fit almost all transmitter antenna styles, and allows for neck-straps too. Made from heavy weight nylon/polyester material, durable transparent cover that wont get brittle in near freezing temperatures and padded inside with cotton/nylon material to insulate and protect against rain, sleet or snow. A must have for the RC enthusiast who wants to keep flying/driving in cold weather/climate and also for competition pilots/drivers who want to show their best even in the cold temperatures. No programming required just plug in an USB source 2.1A and select from the 3 modes Low/Medium/High as per temperature outside. The adjustable modes let you choose from 25C~50C max temperature is 55-60C degree. The glove is nicely lined with a heat reflective material, helps keeps your fingers warm & snug. You now have one less reason to avoid going outside to enjoy your model aircraft during the winter! Features:
Specifications:
Included with the package:
|
€29.90
Scorpion TRIBUNUS III 06-160Amp (SBEC) Brushless speed controller for Helicopters, Airplanes
Scorpion TRIBUNUS III 06-160Amp (SBEC) Brushless speed controller for Helicopters, Airplane Improved heat Dissipation-Cooler operation and longer product life Max Continuous Current 160 Amps Peak Current 200 Amps Operating Voltage Range 11-26.1 Volts BEC Output voltage: 5.1V to 12.1V adjustable Max Continuous BEC Output 15 Amps @ 8.1 V Peak BEC Output 30 Amps/1s @ 8.1 V On Resistance 0.37mOhms * 2 ESC Body Size 36.5 x 75.0 x 27.0 mm (1.44 x 2.95 x 1.06 in) Mounting Tab Dimensions 24.0 x 84.0mm ( 0.944 x 3.30 in) / M3 Bolt Weight (Without Connectors) 155g ( 5.47oz) Drive frequency 8kHz - 32kHz Included in the Box 1 x Tribunus III ESC 1 x 30mm Cooling Fan 2 x BEC Cables 1 x Mounting Hardware Pack |
€290.00
Inc. VATScorpion TRIBUNUS III 06-110Amp (SBEC) Brushless speed controller for Helicopters, Airplanes
Scorpion TRIBUNUS III 06-110Amp (SBEC) Brushless speed controller for Helicopters, Airplane Improved heat Dissipation-Cooler operation and longer product life Max Continuous Current 110 Amps Peak Current 150 Amps Operating Voltage Range 11-26.1 Volts BEC Output voltage: 5.1V to 12.1V adjustable Max Continuous BEC Output 10 Amps @ 8.1 V Peak BEC Output 20 Amps/1s @ 8.1 V On Resistance 0.45mohms * 2 ESC Body Size 32.0 x 52.5 x 23.1 mm (1.26 x 2.07 x 0.91 in) Mounting Tab Dimensions 16.0 (Battery Side) / 24.0mm (Phase side) x 58.0mm ( 0.63 / 0.94 x 2.28 in) / M2.5 Bolt Weight (Without Connectors) 105g ( 3.70oz) Drive frequency 8kHz - 32kHz Included in the Box 1 x Tribunus III ESC 1 x 30mm Cooling Fan 2 x BEC Cables |
€190.00
Inc. VATOptimix RTR 16% Nitro Car Fuel 2.5 Litres OP1002K
Designed to maximize the permitted nitro percentage in line with the new EU law permitting maximum nitro-methane content. especially made to be Perfect for cars, boats. OPTIMIX RTR 16 – 2.5 is supplied as a 2.5lt container and is 16% nitromethane with 15% fully synthetic oil from KLOTZ. This is a very high-performance RTR fuel for general use not race applications. The tuning band on RTR fuels are wider and therefore a little less critical Note EN:
Note FR :
Anmerkung DE:
NB NL:
|
€21.00
Inc. VATSab Goblin Kraken 580 Small brother Helicopter Orange/Blue #SG586
Goblin Kraken 580 Orange/Blue This is the Kraken 580 with 2024 Orange/Blue scheme! The new Kraken 580 use the same concepts from the Kraken 700. -Incredible strong Power train enclosed in aluminum case, -Ultra light 7075 aluminum alloy highly adjustable rotor head with super simple Tail group, -Body and boom design with integrated frames, to create a amazing fuselage style -Boom detachment system for improved crash durability. -Main blades up to 600mm. TECHNICAL SPECITICATIONS -AIRFRAME weight: 1760gr ( with blades, no battery, no electronics ) -Main blade length: 550mm to 600mm -Tail blade length: 95 to 105 mm -Main rotor diameter: 1270 mm (with 570 mm blades included) -Tail rotor diameter: 260 mm (with 95 mm tail blades included) -Cyclic Servos: mini cyclic servo (torque over 8 Kg-cm). Kit includes servo mounts for mini-servos. Full size servo mounts available separately. -Tail Servo: standard size 40mm. -Main Rotor ratio : 11.5 to 8.6 :1 ( 22T included: 9.4:1) -Tail Rotor ratio : 5.3-4.9:1 ( 23T included: 4.9:1 ) -Typical motor : 4025 series, 6S 1000-1200 Kv, 12S 500-600 Kv. Minimum motor shaft length is 26mm (We recommend using a 6mm diameter motor shaft) -Typical speed controller: 6S 120-140 A, 12S 100-130A -Battery size: 6S 5000/5800 mAh, 12S 2600/3200 mAh. |
€828.00
Inc. VATUAVsystems Fireproof LiPo carry and storage Safe Bag for 12s-14s 340mm long
The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe. Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged. Instructions to use: Ensure that charger rate is properly set and polarity is correct
Please check the Video showing the use of Lipo Safe |
€14.99
Inc. VATAlign TB60 6S Electric RC Helicopter Super Combo Microbeast #RH60E26XT
Let's delve further into the exciting world of the Align TB60 Super 6S Electric RC Helicopter Kit, a true test of skill and precision. This helicopter kit marks the return of Align RC Helicopters to the forefront of the hobby, and it comes in two enticing versions. The 6S edition of the TB60 is tailored for pilots who prefer the power of a genuine 5000mAh 6S LiPo battery, offering a thrilling flight experience. Alternatively, there's the 12S version for those who seek even more power and extended flight times. This dual-flavor offering ensures that pilots can find the perfect fit for their flying preferences. The TB60 is not just a revival; it's a step forward with a host of new features. The addition of a belt drive tail, an updated boom locking and tension system, redesigned skids, and a quick-release battery tray all enhance the helicopter's overall performance. These improvements make setup and maintenance a breeze while contributing to a more efficient and enjoyable flying experience. One of the standout features of the 6S version is its compatibility with a 150A Hobbywing ESC and a robust 930KV 750MX motor, offering ample power and control for demanding flight maneuvers. This combination ensures that pilots can push their skills to the limit and explore new horizons in the world of RC helicopter flying. It's important to note that the descriptions provided here assume the purchase of the full super combo, which includes all available options at the time of purchase. This comprehensive package is designed to cater to the needs of avid RC helicopter enthusiasts, offering a complete and customizable experience that leaves no room for compromise. The Align TB60 Super 6S Electric RC Helicopter Kit is a thrilling journey for those who demand the best in their RC flying adventures. Specification:
Included
Radio transmitter and electronic equipment required for assembly:
|
€1499.99
Inc. VATMikado Tuning Carbon-alu drive pulley LOGO 500/600 #04456
This is an upgraded Carbon-Aluminum Drive pulley LOGO , this pulley is more precise CNC part, excellent Upgrade for Logo helicopters can be used on LOGO 500 / LOGO 550 SE / LOGO 500 SE (2009-2012) / LOGO 550 SX / LOGO 600 / LOGO 600 SE / LOGO 600 SE (2010-2013) / LOGO 600 SX / LOGO 480 XXTREME Set of 1 pulley |
€46.00
Inc. VATMikado Helicopter Clamps for carbon tailrotor case 20mm
Mikado Helicopter Clamps for carbon tailrotor case 20mm. Set of 2. Use for LOGO 500 SE (2009-2012) / Logo 500/ Logo 400SE / Logo 400 |
€6.90
Inc. VATEDGE 753mm Premium Blades Flybarless - Flybar Version
EDGE 753mm Premium Blades Flybarless - Flybar Version
EDGE rotor blades are proudly designed in the USA and Manufactured by one of the best known blade manufacturers in the world funkey. |
€179.00
€129.00
28% Off Inc. VATEDGE 713mm Premium Blades Flybarless-Flybar Version
EDGE 713mm Premium Flybarless Blades
EDGE rotor blades are proudly designed in the USA and Manufactured by one of the best known blade manufacturers in the world funkey. |
€119.00
€105.00
12% Off Inc. VATGraupner Stainless Header for Zenoah engine 90 degrees #2220.1
Graupner Stainless Header for Zenoah engine 90 degrees #2220.1
|
€27.00
Inc. VATFutaba 12FG Carbon Transmitter Tray set with Neck strap, Demo
this is a Demo tray fits Futaba 12FG, made in germany by Robbe this tray was used for some time, but in perfect condition, comes with Neck strap. |
€129.00
€49.00
62% Off Inc. VATMicro to Normal Throttle Servo Support adapter #LX0045
Adapter plate for Normal servo to fit Small size Micro servo to reduce weight. |
€17.90
Inc. VATExhaust Header for Super Tigre ST S61-S75-S90 Black color
Exhaust Header for Super Tigre ST S61-S75-S90 Black color |
€27.00
Inc. VATPichler FliteZone spare parts set BO105 #15295
Pichler FliteZone spare parts set BO105 #15295 |
€14.95
Inc. VATROG TERRA 56T METAL CENTER SPUR GEAR (32 PITCH)
ROG TERRA 56T METAL CENTER SPUR GEAR (32 PITCH) |
€19.90
Inc. VATGraupner Cam Folding Prop 36x20cm - 14/8' #1336.36.20
Graupner, 1336.36.20, Propeller blades Cam Folding Prop 36x20cm - 14/8" The pairs packed propeller blades can be used as a replacement sheets or in combination with the separately available spinners. |
€9.99
Inc. VATMetric Coarse Threading Die, M1.6 High Speed Steel
Metric Coarse Threading Die, M1.6 High Speed Steel Manufactured to DIN223B standards the HSS ground thread dies are designed for use in diestocks to produce external screw threads. |
€6.90
Inc. VATMetric Coarse Threading Die, M2.3 High Speed Steel
Die for 2.3 mm DIN 223B, HSS Manufactured to DIN223B standards the HSS ground thread dies are designed for use in diestocks to produce external screw threads. Set of 1 Die
|
€6.90
Inc. VATSkyRC Quattro Q200 neo Quad-Charger 240VAC/12VDC with internal power Supply
SkyRC Quattro Q200 neo Quad-Charger 240VAC/12VDC with internal power Supply Experience a revolutionary charging process tailored for RC enthusiasts with the SkyRC Q200neo charger, boasting four impressive charging ports. This advanced powerhouse redefines convenience by enabling four simultaneous charging of multiple chemistry batteries and powering with dual AC/DC input. It delivers a remarkable total power of up to 400W with up to 10A per port. Additionally, it accelerates the balancing process among battery cells with an 800mA balancing current per cell, significantly enhancing the overall charging efficiency. The built-in high-precision balancer ensures exceptional accuracy with a remarkable voltage equalization optimization of ±0.02V. Whether you're a seasoned professional or a passionate hobbyist, Q200neo guarantees that your batteries will always be ready to power your thrilling RC adventures. Bid farewell to downtime and embrace the limitless potential of your RC pursuits with the SkyRC Q200neo charger. Lets charge! Small, Yet Mighty: Unleash Power on the Go! Q200neo packs outrageous performance, 4 independent ports, and AC/DC dual input into an unbelievably compact footprint, 40% smaller than its predecessor, Q200. Whether you need to power up your RC car, fly a drone, or use ChatGPT on your new Mac, Q200neo has you covered! Hero Meets Hero - This is the charger made for you—the pro! Innovation in Indigo: Immerse yourself in the cutting-edge with the SkyRC Q200neo, now available in a captivating indigo color. Inspired by Silicon Valley legend SGI, who famously adopted indigo for their iconic products, this vibrant hue represents innovation and pushes the boundaries of what's possible. You're not only choosing a color, but also joining a lineage of trailblazers who refuse to settle for mediocrity. Do More With One Charger! Multiple Chemistries on The Go. With exceptional versatility, Q200neo can charge a wide range of battery chemistries. This powerhouse can charge from LiPo and LiFe to Li-ion, LiHV, Pb, NiMH, and NiCd. You are turbocharging your time with a single charger that can handle multiple battery types. Whether you're an RC guru, a beginner, or somewhere in between, Q200neo is the reliable and adaptable choice that ensures optimal performance for all your batteries. Unlock the full potential of your battery arsenal with Q200neo – versatility multiplied capability. Dual AC/DC Input: Efficient. Beyond. Q200neo is designed to provide RC enthusiasts unparalleled flexibility in the garage or out in the field. You have the freedom to choose between AC or DC input based on your specific scenarios. In AC mode, the charging power reaches an impressive overall 200W, dynamically distributing to each port. When powered by DC, the charger unleashes its true potential, offering an astounding overall 400W of charging power. With a single port capable of reaching up to 100W, you can power up your batteries with remarkable speed and precision. Whether you are a beginner or a seasoned RC guru engaging in racing, Q200neo ensures efficient charging and optimal performance for your RC batteries. Smart Power Distribution Seamless Charging Flexibility. Under AC input, when a single two ports are in use, Q200neo will provide maximum power output to that specific ports. The charging power is distributed dynamically and intelligently when all four ports are simultaneously in use. Once a particular port has completed its charging task, the remaining port(s) will receive increased power for faster charging. This intelligent and efficient allocation of power ensures optimal utilization at all times. The charging capabilities of Q200neo are highly flexible, allowing for versatile charging options. Unmatched Charging, Impressive Discharging This cutting-edge charger not only offers efficient charging but also provides impressive discharging functionality. The built-in balance port enables Q200neo to discharge faster, allowing it to discharge at up to 25W when used in conjunction with the main port. In contrast, the discharge rate when using the main port alone is limited to 5W. Whether you need to prepare your batteries for storage, balance their voltage levels, or safely discharge them after use, the Q200neo is there for you! This advanced discharging feature allows you to maintain the health and longevity of your batteries by precisely controlling the discharge process. So. Pro. Digital Power Q200neo excels not only in charging, but also as a versatile quad output digital power supply. With just a few clicks on the menu, Q200neo offers a voltage option, from 1.0V to 30.0V, with an adjustable increment of 0.1V. Additionally, the current can be adjusted from 0.1A to 10.0A, with a precision of 0.1A. This quad output digital DC power supply provides four independently controllable power outputs, making it a versatile tool for various RC testing and prototyping applications. 20W PD 3.0 Port - Energize with Rapid Power Delivery! With the 20W USB-C PD 3.0 charging port, our RC players can enjoy rapid charging speeds like never before. Whether you're charging your smartphones, tablets, or 2020 MacBook Airs, this powerful port ensures that you can fuel up your devices in a fraction of the time. Charge It Cool Within the sleek enclosure lies a groundbreaking thermal system designed to let Arm Cortex-M4 fly through heavy workloads at screaming-fast speeds — and stay whisper quiet. The fan will adjust the speed accordingly and dissipate heat more effectively according to the different power usage. Charge in Your Language ColorX is designed to be easily localized and comfortably engaged. The interface is currently available in English, Dutch, Chinese, French and Japanese*. Users can easily change the language with simple clicks so that they can charge in the most comfortable language. (*More languages will be released by time!) Smart Charging at Your Keyboard or Fingertips Connected effortlessly to your charger via the versatile Type-C port or through the convenience of Bluetooth, Q200neo can be controlled by Charger Master on PC, Mac or smartphone. Whether you're at your keyboard or on the go, our charger puts the power in your hands. The app empowers you to take complete charge of your charging experience. From adjustable charging rates to battery health monitoring, you can customize every aspect of the charging process to ensure optimal performance and battery longevity. Don't settle for ordinary boring charging. Take charge. Power up! Stay Updated, Always! Upgrading your charger is now easier than ever. With the Charge Master app, you have two convenient options: Connect your charger to the app using the Type-C port for a fast and reliable upgrade experience. Alternatively, you can perform an Over-The-Air (OTA) update directly through the built-in Bluetooth functionality. Whichever you prefer, upgrading your charger is a breeze. Experience flexibility and compatibility with the Charge Master app, available in four flavors: Mac, Windows, iOS, and Android! Stay connected, stay updated, and you deserve a happier charging experience. Specs:
Power:
DC Power Supply:
Batteries:
Charge and Discharge:
Operation:
|
€214.00
Inc. VATGRAUPNER MZ-32 HOTT Single Transmitter with Carry case, battery
The mz-32 is centered around you
|