Miniature Aircraft
Whiplash C/F Boom Clamp Plate
Whiplash C/F Boom Clamp Plate (Pack of 1) Fits Whiplash Gasser Models |
€8.80
Inc. VATWhiplash C/F Boom Clamp Plate (Pack of 1)
Whiplash C/F Boom Clamp Plate (Pack of 1) - 1 pcs - 1 x 134-128 Fits Whiplash 730E |
€8.80
Inc. VATWhiplash C/F Front Doubler Electric (Pack of 2)
Whiplash C/F Front Doubler Electric (Pack of 2) |
€7.50
Inc. VATWhiplash C/F Left Frame Nitro V2
131-488 C/F Left Frame - Nitro V2 - Pack of 1 - 1 pcs - 1 x 131-488 Fits Whiplash Nitro V2 Models |
€96.50
Inc. VATWhiplash C/F Right Frame Nitro V2
C/F Right Frame - Nitro V2 - Pack of 1 - 1 pcs - 1 x 131-487 Fits Whiplash Nitro V2 Models |
€96.50
Inc. VATWhiplash C/F Servo Mount Plate (Pack of 10)
Whiplash C/F Servo Mount Plate (Pack of 10) - 10 pcs - for standard 20mm servos |
€8.80
Inc. VATWhiplash C/F Servo Mount Plate (Pack of 10)
Whiplash C/F Servo Mount Plate (Pack of 10) - 10 pcs - for servos with 3mm mounting bores |
€8.80
Inc. VATWhiplash C/F Servo Rail Spacer (Pack of 2)
Whiplash C/F Servo Rail Spacer (Pack of 2) |
€6.50
Inc. VATWhiplash C/F Strut Spacer (Pack of 2)
Whiplash C/F Strut Spacer (Pack of 2) - 2 pcs - 2 x 132-382 Fits Whiplash Electric Models |
€6.60
Inc. VATWhiplash C/F Tail Boom 800 size (Pack of 1)
133-801 C/F Whiplash Tail Boom 800 size - Pack of 1 - 1 pcs - 1 x 133-801 Fits Whiplash Gasser Models V2 |
€42.90
Inc. VATWhiplash C/F Vertical Tail Fin
Whiplash C/F Vertical Tail Fin (Pack of 1) - 1 pcs - 1 x 133-60 Fits all Whiplash Models |
€17.60
Inc. VATWhiplash C/F Vertical Tail Fin Green
Whiplash C/F Vertical Tail Fin Green (Pack of 1) |
€17.60
Inc. VATWhiplash CNC machined POM Tail Bevel Gear TT Side - Pack of 1
131-18-C Whiplash Tail Bevel Gear TT Side - Pack of 1 POM Bevel Gear 100% CNC Machined - 1 pcs - 1 x 131-18-C Fits Whiplash Nitro, Electric, Gasser Models This new CNC machined POM bevel gear may only be used in combination with the new MA131-17-B, -C CNC machined aluminum bevel gear. Use a shim washer to adjust gear mesh. A special made M15 x 18 x .10 shim washer is available: MA131-149 |
€23.50
Inc. VATWhiplash Gas Fuel Tank - Set
133-99 Whiplash Gas Fuel Tank - Set - 9 pcs - |
€22.00
Inc. VATWhiplash Gas One-Way Bearing Bracket (Pack of 1)
Whiplash Gas One-Way Bearing Bracket (Pack of 1) Fits Whiplash Gasser Models Including Bearing |
€29.70
Inc. VATWhiplash Gas V2 Clutch and Motor Mount Support - Set
Whiplash Gas V2 Clutch and Motor Mount Support - Set 133-416 Whiplash V2 16t Pinion - Pack of 1 - 1 pc - 1 x 133-416 Fits Whiplash Version 2 Models |
€33.00
Inc. VATWhiplash gasser CNC Machined Clutch System Stack MA133-125
133-125 CNC Machined Clutch System Stack - Set Including top-start one-way bearing. Fits for Zenoah, TRM, BH-Hanson, OBR, RC Style Gas engines. Ensures perfect concentric of the clutch system. This clutch stack is designed to eliminate all causes of run-out of the original ZenoaH clutch which can have an axial and radial run-out of up to 0.15" (0.38mm). This run-out causes heavy vibrations which normally result in broken screws, broken aluminum parts and in disconnecting electrical connectors or results in broken wires. The new MA clutch stack is based on a high precise clutch hub. The studs which hold the clutch shoes are pre-assembled at the hub. They are not centered by the thread - they are centered by a precise cylinder at the hub for each stud. This eliminates and deviation caused by threads. The upper part which holds the one way bearing for top start is also positioned by the studs and precise bores. So there is no thread involved in centering this part also. The result is a precise true running clutch stack. But the clutch stack can only be as precise as the crank is. So please check the crank for true running before installing the clutch system. |
€78.10
Inc. VATWhiplash gasser CNC Zenoah Hub Tool - Set
3000-76 Zenoah Hub Tool - Set - set - 1 x 3000-76, 1 x 3000-77, 2 x knurled screw M5 |
€65.99
Inc. VATWhiplash Head Axle (131-187) - Pack of 3
2700-27 Whiplash Head Axle - Pack of 3 - 3 pcs - 3 x 131-187 |
€27.50
Inc. VATWhiplash Head Axle - Set
131-187-1 Whiplash Head Axle - Set - 3 pcs - |
€13.20
Inc. VATWhiplash Head Rod / Ball Link - Set
2600-72 Whiplash Head Rod / Ball Link - Set - 15 pcs -10 x 0133-1, 3 x 121-4, 2 x 121-7 Complete Rod and Ball Linkage Set for the Flybarless Head, from the Swash Plate inner balls to the Blade Grip Pitch Arm |
€13.50
Inc. VATWhiplash M2 x 5 Hardened Ground Steel Pins
0225-5 m2 x 5 Hardened Ground Steel Pins - Pack of 4 |