Mikado Logo 700 2016 model

Mikado Upper sideframe left, LOGO 700

Mikado Upper sideframe right, LOGO 700

Mikado Vertical fin, LOGO 700

Motorshaft Scorpion HK-4525 Motor, 6x55mm

Direct replacement for Standard pitch rod ( various lengths )

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment every time and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack include 2 RODS, M2.5mm, possible to add Quality Plastic ball links (2 per rod)

Lengths: 38 or 44 or 56mm

Direct replacement for Pitch Links connection Rod, M3 tread, 20mm long(perfect for connecting 2 ball links together)

Linkage rod SET with counter threads, made from Stainless steel, with easy adjustment.

Usually, we can't fine-tune a typical ball linkage set to any length because we need to turn the ball link a whole or multiple rounds.
In order to keep the direction of the ball link.
Besides, we need to take off and put on the ball link for adjustment every time and this is really a troublesome step.
 
Now we solve this problem. With the two-way fine adjustable linkage rods, you are able to fine-tune the linkage length without taking off the ball link.
The helicopter setup is no more a bothersome process!!

Pack include 2 RODS, M3 x 20mm

Description:

Mikado Carbon Battery Plate for LOGO 700

Carbon Vertical Fin - LOGO 700

LOGO 700 Main gear cover

LOGO 700 Motor counterbearing plate, 8mm shaft

LOGO 700 Motor mount

Through improvements in motor design and materials, we have been able to increase the efficiency and power conversion of this motor with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

With the new HKII-4525-520kv Ultimate motor, we have once again raised the bar and created a new benchmark for 700-class helicopter power!

Each of the new HKII-4525-520KV ULTIMATE motor is wound with a single strand of 1.4mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 4450 watts at 100 amps, and can handle peak inputs of 10200 watts and 230 amps for 2 seconds

Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm lamination to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in

• Stator Diameter - 45 mm
• Stator Thickness - 25 mm
• No. of Stator Arms - 12
• Magnet Poles - 10
• Motor Wind - 5+6T YY
• Motor Kv - 520 KV RPM / Volt
• No-Load Current (IO/8.4v) - 1.75 Amps
• Max pEAK Current - 200A 2SEC
• Max Peak Power - 10200 Watts/ 2 sec
• Weight - 487 Grams
• Outside Diameter - 56,7mm
• Shaft Diameter - 5.98 mm x 55mm
• Body Length - 53,4 mm
• Overall Shaft Length - 114mm
• Max Lipo Cell - 12s

Through improvements in motor design and materials, we have been able to increase the efficiency and power conversion of this motor with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

Pinion for herringbone gear 13 teeth 25, M1, dia. 6mm

Pinion for herringbone gear 14 teeth 25, M1, dia. 6mm

Savox SB-2283MG High Voltage Brushless Servo 10Kg@0.048 Sec- Steel Gear, Tail

Features:

- Leading edge digital servo technology
- High efficiency Brushless motor
- Accurate and fast response
- Super high resolution
- Aluminium case for improved motor cooling and total strength
- Ball beared
- Precision Metal gears

Technical specifications:

• Servo Technology: Digital High Voltage
• Input Voltage (V): 6.0V - 7.4V
• Servo Type / Size: Standard
• Motor Type: Brushless Motor
• Gear Material: Metal Gears
• Ball Beared: Ball Beared
• Servo Case: Aluminium
• Speed 60°/Sec @ 7.4V: 0.048 Sec/60°
• Torque kg/cm @ 7.4V: 10.0 Kg/cm
• Length (mm): 40.3 mm
• Width (mm): 20.2 mm
• Height (mm): 38.7 mm
• Weight (g): 76 g
• Connector type: JR
• Spline size: 25T Spline

Savox SB-2282SG Digital High Voltage Brushless Motor Servo, Steel Gear

Features:

• Leading edge digital servo technology
• High efficiency Brushless motor
• Accurate and fast response
• Super high resolution
• Aluminium case for improved motor cooling and total strength
• Ball beared
• Precision Steel gears

Technical specifications:

• Servo Technology: Digital High Voltage
• Input Voltage (V): 6.0V 7.4V
• Servo Type / Size: Standard
• Motor Type: Brushless Motor
• Gear Material: Steel Gears
• Ball Beared: Ball Beared
• Servo Case: Aluminium
• Speed 60°/Sec @ 7.4V: 0.075 Sec/60°
• Torque kg/cm @ 7.4V: 23.0 Kg/cm
• Length (mm): 40.3 mm
• Width (mm): 20.2 mm
• Height (mm): 38.7 mm
• Weight (g): 81 g
• Connector type: JR
• Spline size: 25T Spline

Main blade holder LOGO 600/700/800

Mikado Ball Links 2,5 mm (20 pieces in set)

Ball links 2.5 mm (10 pieces)

For all Logo

Socket head cap screw M3x10

Steel balls with 3mm hole (2pcs)

For all LOGO

Countersunk screw M3x8, 10 pcs