Goblin Fireball, Mini comet

Goblin Fireball, Mini comet
Page of 4
SAB FG Boom Fireball Red - Mini Comet

SAB FG Boom Fireball Red - Mini Comet

H0934-S - FG Boom Fireball Red

Includes:

  • 4 x Washer 2,1 x 4,5 x 0,5
  • 2 x Locking Element Tail
  • 1 x Boom Fireball Red
  • 2 x Double Side Tape for H0910
  • 4 x Socket Head Cap M2x6

Use for:

  • Goblin Mini Comet

€25.00

Inc. VAT
Quantity
SAB Goblin 30AWG OD=1 Yellow Silicone

SAB Goblin 30AWG OD=1 Yellow Silicone

Description:

Includes:

  • Wire - Length 1 meter

Use for:

  • Goblin Fireball
  • MiniComet

€4.50

Inc. VAT
Quantity
SAB Goblin Aluminium Bell Crank Lever

SAB Goblin Aluminium Bell Crank Lever

Description:

SAB Goblin Aluminium Bell Cranl Lever

Includes:

  • 1x Alluminium Tail Pitch Slider
  • 2x Flanged bearing 2 x 5 x 2,5
  • 1x Grip Link Bush
  • 2x Tail Pin
  • 1x Uniball M2 D4 H3
  • 1x Socket Head Cap M2x12

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€21.00

Inc. VAT
Quantity
SAB Goblin Aluminium Black Matte Center Hub

SAB Goblin Aluminium Black Matte Center Hub

SAB Goblin Aluminium Black Matte Center Hub

Includes:

  • 1 x Center Hub Black Matte
  • 2 x Socket M3 x 12
  • 1 x Shoulder M4 x 24
  • 1 x Metric Hex Nylon Nuts M4 H5

€50.00

Inc. VAT
Quantity
SAB Goblin Aluminium Pulley Fireball / MiniComet

SAB Goblin Aluminium Pulley Fireball / MiniComet

SAB Goblin Aluminium Pulley

Use for:

  • Fireball
  • MiniComet

 

€21.00

Inc. VAT
Quantity
SAB Goblin Aluminium Tail Blade Grip

SAB Goblin Aluminium Tail Blade Grip

SAB Goblin Aluminium Tail Blade Grip

Includes:

  • 2x AlluminiumTail Grip Plastic
  • 2x Thrust bearing 3 x 6 x2,8
  • 4x Ball Bearing 3 x 6 x 2mm (MR63)
  • 2x Shim 4.5 x 5.9 x 0.3mm
  • 2x Washer 2,1 x 4,5 x 0,5
  • 2x Socket Head Cap M2x5

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€26.00

Inc. VAT
Quantity
SAB Goblin Aluminum Blade Grip Arm - Goblin Fireball #H0843-S

SAB Goblin Aluminum Blade Grip Arm - Goblin Fireball #H0843-S

Includes:

- 1x Red Aluminum Blade Grip Arm

- 1x DFC Arm

- 1x Set Screw M2 x 10mm

- 2x Flanged bearing 2 x 5 x 2,5

- 1x Uniball Arm

- 1x Socket Head Cap M2x8

- 1x Socket Head Cap M2x6

Use for:

- Goblin Fireball

- Goblin mini Comet

€15.00

Inc. VAT
Quantity
SAB Goblin Aluminum Rear Support

SAB Goblin Aluminum Rear Support

Description:

SAB Goblin Aluminum Rear Support

Use for:

  • Goblin Fireball
  • Mini Comet

€14.00

Inc. VAT
Quantity
SAB Goblin ALUMINUM TAIL PULLEY 27T  #H0859-27-S

SAB Goblin ALUMINUM TAIL PULLEY 27T #H0859-27-S

Includes:

1 x Tail Pulley 27T Assembled.

1 x Set Screw M4x6mm.

Used for:

Goblin Comet

€25.00

Inc. VAT
Quantity
SAB Goblin Bell Crank Lever Fireball, Mini comet #H0797-S

SAB Goblin Bell Crank Lever Fireball, Mini comet #H0797-S

SAB Goblin Bell Crank Lever Fireball, Mini comet #H0797-S

Includes:

  • 1x Tail Pitch Slider
  • 2x Flanged bearing 2 x 5 x 2,5
  • 1x Grip Link Bush
  • 2x Tail Pin
  • 1x Uniball M2 D4 H3
  • 1x Socket Head Cap M2x12
  • 2x Shim 2.1 x 3.6 x 0.2mm

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€11.00

Inc. VAT
Quantity
SAB Goblin Bell Crank Support

SAB Goblin Bell Crank Support

Description:

Includes:

  • 1x Bell Crank Support
  • 4x Socket Screw 1,6 x 5mm

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€8.00

Inc. VAT
Quantity
SAB Goblin Black Grip Arm Plastic

SAB Goblin Black Grip Arm Plastic

Description:

Includes:

  • 1x Black Grip Arm Plastic
  • 1x DFC Arm
  • 1x Set Screw M2 x 10mm
  • 2x Flanged bearing 2 x 5 x 2,5
  • 1x Uniball Arm
  • 1x Socket Head Cap M2x8
  • 1x Socket Head Cap M2x6

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€9.00

Inc. VAT
Quantity
SAB Goblin Boom Comet Yellow / Red

SAB Goblin Boom Comet Yellow / Red

SAB Goblin Boom Comet Yellow / Red

Includes:

  • 1 x Yellow / Red Boom Comet.
  • 2 x Tail Locking Element.
  • 4 x Metric Hex Nylon Nut M3
  • 2 x Double Side Tape.
  • 4 x Flat Head Cap Screw M3x10mm.

Use for:

  • Goblin Comet

 

€150.00

Inc. VAT
Quantity
SAB Goblin Canopy Fireball Havok #H0990-S

SAB Goblin Canopy Fireball Havok #H0990-S

Includes:

2 x Canopy Positioner

1 x Canopy Fireball Havok

2 x Socket Head Cap M2,5x6 Special

2 x Rubber Washer 3 x 7mm

Used for:

Goblin Fireball havok

€33.00

Inc. VAT
Quantity
SAB Goblin Canopy Positioner

SAB Goblin Canopy Positioner

Description:

Includes:

  • 2x Canopy Positioner
  • 2x Button M3 x 4

Use for:

  • Goblin Fireball

€7.00

Inc. VAT
Quantity
SAB Goblin Carbon Reinforced Tube Fireball Yellow

SAB Goblin Carbon Reinforced Tube Fireball Yellow

Description:

SAB Goblin Carbon Reinforced Tube Fireball Yellow

Use for:

  • Goblin Fireball

€25.00

Inc. VAT
Quantity
SAB Goblin Carbon Rod 1.8 x 3 x 276mm

SAB Goblin Carbon Rod 1.8 x 3 x 276mm

Description:

Includes:

  • 1x Carbon Rod (Pultrusion Tube 3 x 1.8 x 276mm)
  • 2x Linkage M2x22
  • 2x Uniball Arm

Use for:

  • Goblin Fireball

€6.50

Inc. VAT
Quantity
SAB Goblin Cyclic Servos Support

SAB Goblin Cyclic Servos Support

Description:

Includes:

  • 1x Servo Support
  • 1x Back Servo Support
  • 2x Socket Head Cap M2x6
  • 3x Socket Head Cap M2x8

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€9.00

Inc. VAT
Quantity
SAB Goblin DIN 12.9 SHOULDERED SOCKET HEAD CAP #HC114-S

SAB Goblin DIN 12.9 SHOULDERED SOCKET HEAD CAP #HC114-S

Highest grade DIN 12.9 quality screw size
2 x Socket Head Cap Screw M5x30mm Special
2 x Metric Hex NYLON Nuts M5 H4,8

Shouldered Socket Head Cap Screw M5x30 for Goblin 630 main blade grip

€6.50

Inc. VAT
Quantity
SAB Goblin DIN 12.9 SHOULDERED SOCKET HEAD CAP M3X20 SPECIAL#HC082-S

SAB Goblin DIN 12.9 SHOULDERED SOCKET HEAD CAP M3X20 SPECIAL#HC082-S

Included:

DIN 12.9 Shouldered Socket Head Cap M3x20 Special x 10pcs

€6.50

Inc. VAT
Quantity
SAB Goblin DIN 12.9 SOCKET HEAD CAP M3X20 #HC080-S

SAB Goblin DIN 12.9 SOCKET HEAD CAP M3X20 #HC080-S

Highest grade DIN 12.9 quality screw size
10 x Socket Head Cap Screw M3x20mm

€5.50

Inc. VAT
Quantity
SAB Goblin DIN 12.9 SOCKET HEAD CAP M4X25 #HC110-S

SAB Goblin DIN 12.9 SOCKET HEAD CAP M4X25 #HC110-S

Highest grade DIN 12.9 quality screw size
10 x Socket Head Cap Screw M4x25mm

€5.50

Inc. VAT
Quantity
SAB Goblin ESC 60A LV V4 Hobbywing OEM Platinum

SAB Goblin ESC 60A LV V4 Hobbywing OEM Platinum

SAB ( Hobbywing OEM) V4 serial products allows the motor to start extremely smooth and avoids tail-drift issues that helicopters experience. The start-up time is adjustable from 8 to 25 seconds, this will definitely create a perfect starting point for every flight.

High-performance 32-bit processor with a running frequency of 72MHz combined with advanced algorithm optimizes the speed governing. Together with the adjustable governor parameters guarantee every pilot a precise control experience. The built-in switch mode BEC with an adjustable voltage range from 5V to 8V, a continuous current of over 10A and peak current of 25A can supply enough power for your servos to operate efficiently.

This Platinum V4 ESC has “Brake Disabled, Normal Brake, Proportional Brake and Reverse Brake” four brake modes. The brake amount is adjustable in normal brake mode; in proportional brake mode, the brake force will be automatically allotted based on the position of radio throttle stick; in reverse brake mode, the motor rotation can be changed via a spare transmitter channel.

Multiple protection features include ESC thermal, capacitor thermal (HOBBYWING-patented technology), ESC overload, throttle signal loss(or Fail Safe), and low voltage cutoff effectively prolongs the service life of the ESC. The Built-in Arc proof circuit effectively eliminates Arc/Spark produced at the “powering-on” moment and prolongs the connectors‘ lifespan.

FEATURES

  • High Voltage Built-in BEC
  • Excellent Motor Speed Governing
  • DEO Technology
  • Four Brake Modes
  • Multiple Protections
  • Brushed/Brushless: Brushless
  • Cont./Peak Current: 60A/80A
  • Input Voltage: 3-6S LiPo
  • BEC Output: Switch Mode:5-8V,7A
  • Input Wires: Red-14AWG-100mm*1/Black-14AWG-100mm*1
  • Output Wires: Black-14AWG-75mm*3
  • Input Connectors: No
  • Output Connecotors: 3.5mm Gold Connectors (Female)
  • LCD Program Box: Supported
  • WiFi Module: Supported
  • Size: 48.0x30.0x15.5mm
  • Weight: 49g

€75.00

Inc. VAT
Quantity
SAB Goblin Feeder

SAB Goblin Feeder

Description:

Includes:

  • 1x Feeder
  • 1x Feeder Damper 90 shoreBlack
  • 1x Set Screw M3 x 4mm

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€9.00

Inc. VAT
Quantity
SAB Goblin Fireball Anti-Static Kit

SAB Goblin Fireball Anti-Static Kit

Description:

Includes:

  • 1 x Static Column
  • 1 x Bearing 3 x 6 x 2.5
  • 2 x Socket Screw 1.6 x 5mm
  • 1 x Socket Screw 1.6 x 4mm
  • 5 x Eyelet Lug L=9.8mm, ID1=2.1mm, OD1=4.95mm, ID2=1.05mm, OD=2.5mm, TD=0.2mm
  • 4 x Washer 1.6 x 3.8 x 0.3mm
  • 1 x UL3239 3KV 30AWG OD1.0 Silicone Wire Yellow (50cm)
  • 2 x Washer 2.2 x 5 x 0.3

Use for:

  • Goblin Fireball
  • MiniComet

€13.00

Inc. VAT
Quantity
SAB Goblin Fireball Frame DX

SAB Goblin Fireball Frame DX

Description:

Includes:

  • 1x Frame DX
  • 1x Magnet N52, D5 x 6mm

Use for:

  • Goblin Fireball

€13.00

Inc. VAT
Quantity
SAB Goblin Fireball Frame SX

SAB Goblin Fireball Frame SX

Description:

Includes:

  • 1x Frame SX
  • 1x Magnet N52, D5 x 6mm

Use for:

  • Goblin Fireball

 

€13.00

Inc. VAT
Quantity
SAB Goblin Fireball Sticker Carbon

SAB Goblin Fireball Sticker Carbon

SAB Goblin Fireball Sticker Carbon

Includes:

  • 1x Sticker Fireball

Use for:

  • Goblin Fireball

€7.00

Inc. VAT
Quantity
SAB Goblin FLANGED BEARING 2X5X2.5MM ( MF52ZZ ) #HC456-S

SAB Goblin FLANGED BEARING 2X5X2.5MM ( MF52ZZ ) #HC456-S

Includes:

- Flanged Bearing 2x 5x2.5 x 4pcs

Use for:

- Goblin 380

- Goblin Fireball

- Goblin miniComet

€9.00

Inc. VAT
Quantity
SAB Goblin Front Tail Pulley Z76

SAB Goblin Front Tail Pulley Z76

Description:

Includes:

  • 1x Pulley Z76
  • 3x Button Head Cap M2x4

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€9.00

Inc. VAT
Quantity
SAB Goblin Hub Pivot Head

SAB Goblin Hub Pivot Head

SAB Goblin Hub Pivot Head

Use for:

  • Mini Comet

 

€75.00

Inc. VAT
Quantity
SAB Goblin Landing Gear

SAB Goblin Landing Gear

Description:

Includes:

  • 1x Landing Gear Plastic
  • 4x Socket Head Cap M2x8
  • 4x Washer 2,1 x 4,5 x 0,5

Use for:

  • Goblin Fireball

€11.00

Inc. VAT
Quantity
SAB Goblin Left Tensioner Support

SAB Goblin Left Tensioner Support

Description:

Includes:

  • 1x Left Tensioner Support
  • 1x Bush Bearing
  • 1x Block Tensioner
  • 2x Flat Head Socket Cap M2,5x5
  • 2x Flanged Bearing 4 x 7 x 2.5mm (MF74zz)
  • 1x Socket Head Cap M2,5x6 Special
  • 1x Washer 2,6 x 6 x 0,5mm

Use for:

  • Goblin Fireball

€11.00

Inc. VAT
Quantity
SAB Goblin Main Bearing Support

SAB Goblin Main Bearing Support

Description:

Includes:

  • 1x Bearing Support
  • 2x Ball Bearing 4.765 x 12.7 x 4.987mm (R3ZZ)

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€16.00

Inc. VAT
Quantity
SAB Goblin Main Blade Grip

SAB Goblin Main Blade Grip

Description:

Includes:

  • 1x Blade Grip
  • 1x Thrust bearing 4 x 9 x 4
  • 1x Socket Cap M3 x 6
  • 1x Spacer 7 x 9 x 0,5
  • 2x Bearing 4 x 9 x 2,5
  • 1x Socket Head Cap M2x6

Use for:

  • Goblin Fireball
  • Goblin MiniComet

€11.00

Inc. VAT
Quantity
SAB Goblin Main Plate

SAB Goblin Main Plate

Description:

Includes:

  • 1x Main Plate
  • 2x Metric Hex Nylon Nuts M3 H4

Use for:

  • Goblin Fireball

€18.00

Inc. VAT
Quantity
Page of 4