Fusuno

Fusuno CF Landing Gear Blade 180 CFX Goblin style (Neon Orange)

Specification:

• 2 x FUP-B180-LG02-CFOR CF Landing Gear Blade 180 CFX (Neon Orange decal)
• 1 x FUP-180ALS01 Aluminum Landing Skid mount (rear)
• 1 x FUP-180ALS02 Aluminum Landing Skid mount (front)
• 4 x PHS-1604 Pan head screw M1.6x4

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.

 

FUSUNO Green Energy Blade 180 CFX Speed Fuselage Combo

Includes:

• Green Energy Blade 180 CFX Speed Fuselage (TDR shape)   
• Fusuno CF Landing Gear Blade 180 CFX - TDR style (Low profile)       
• Fusuno CF Tail Fin Blade 180 CFX   
• Zeal Carbon fiber Energy main blades 155mm (Green) for Blade 180CFX and Stretched Blade 130X   
• Fusuno Extreme Stiff XS Engineering Plastic Tail Blade 34mm - 180 CFX (Neon Green)   

FUSELAGE INSTALLATION GUIDE:

Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
Remove two button head screws on both sides of the frame.
Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
Secure the Fusuno tail boom by tighten up the two button head screws.
Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
Re-install the tail gear box and secure using the Fusuno CF vertical fin.

 

FUSUNO Monster Airbrush fiberglass Blade 180 CFX Goblin Fuselage

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.

FUSUNO Oddo Airbrush Fiberglass Canopy Robocat 270 Racing Mini Quadcopter

Fusuno canopies are made with highest quality resin and fiberglass material to provide strong but flexible canopies.
It helps prevent cracks that are normally seen in other canopies that are using the lower quality material.
All paints and clear coat are automobile grade provide a great look at the great low price.

FUSUNO Upgrade Fiberglass Fins set LOGO 600. If you’re in the need of a change this new fusuno fins canopy painted style will add a unique look to your RC machine that will definitely stand out from all the rest!

Looking for a way to add a whole new look to your RC helicopter? Tired of drab black and endless other “carbon” kits & parts out there?

Designed to utilize the stock hardware via your helicopter, these frame kits & parts make it easy to upgrade without the fuss & bother of special parts & pieces, allowing you to easily replace items with stock hardware.

Features:

• Constructed of durable, high quality G-10 FRP (fiberglass reinforced plastic)
  
• Resist to scratches & chips.

Included:

• 1x Vertical Stabilizer
• 1x Horizontal stabilizer
• 1x tail case
• No Hardware Included

FUSUNO Uruka Airbrush fiberglass Blade 180 CFX Goblin Fuselage

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.

 

PRODUCT INCLUDES:

• 1 x Airbrush fiberglass canopy
• 1 x Airbrush fiberglass tail boom
• 1 x CF vertical Fin

DESCRIPTION:

• Use for Blade 180 CFX.
• Easy to install!
• Separated body, it’s very easy to replace battery!
• Weight approximate: 25g (Canopy + Boom).

INSTALLATION GUIDE

• Remove the tail gear box, tail boom clamp, and tail pushrodguide set.
• Remove the plastic ball link from the tail pushrod. Put this aside for re-installation later. We suggest you count the number of turns to remove, so it can be later re-installed in the same position.
• Install the Fusuno tail boom by sliding it forward over the stock boom. Be sure the metal tail rod goes through the two carbon tail pushrod guides on the Fusuno tail boom.
• Remove two button head screws on both sides of the frame.
• Push the frame out to create a slot between the frame and the front boom mount so you are able to slide the tail boom inside the slot.
• Secure the Fusuno tail boom by tighten up the two button head screws.
• Re-install the plastic ball linkon to the tail pushrod. Return the rod to its original length by twisting the ball link in and counting the same number of turns as when you removed it. Recheck your tail servo endpoints as necessary.
• Re-install the tail gear box and secure using the Fusuno CF vertical fin.