eTURBINE

eTURBINE

Products


  • eTURBINE 250 FPV racer quadcopter ARTF, radio, Charger, Lipo, Kit, Carry bag

    eTURBINE 250 FPV racer quadcopter ARTF, radio, Charger, Lipo, Kit, Carry bag

    e-TURBINE 250 FPV racer quadcopter is a small size Multicopter made for racing and funfly! this set including ALL needed to fly.

    In general FPV racing,Drone is equiped with a front looking camera and with a real-time broadcast system, so the pilot can watch the pictures with video goggles. In a forest, or on artificial obstacle courses, high speed FPV flying is a challenge when you fly alone, and became very addictive when you practice racing with other modelers. Remember the famous pursuit on the moon of Endor, in the forest, in Star Wars movie. That's what you can expect ! Spare propellers must be expected, but quad racers are very strong and withstand the crashes against obstacles, ground or other competitors models...

    This quadracer is delivered as a kit, with a heavy duty carbon fiber/Metal frame. The four 2204 brushless motors and four 12A ESCs are included, and you will also find the CC3D flight controler. Two high intensity 3W front LEDs will be usefull to fly in the dark, and a rear LEDs strap will help your colleagues  to see you and to avoid a contact.

    Radio, Lipo, Charger, Camera, Video tx and you ready to go.

    Specifications: Please read carefull since our combo providing more value for money !

        Dimensions : 250 size machine
        Flight time : 8 - 13 min
        Weight incl. controller, no lipo- 403 gr

    Included in the set:

    • Motors : 4 x TB2204
    • ESCs : 4 x 12A
    • Propellers :4 props 5 x 3"
    • Flight contoller- CC3D
    • Front LEDs : 2 x 3W white
    • Tail light : 140 mm LEDs strip. Steady and 5 flashing modes. 8 intensity levels.
    • E-turbine Carry bag
    • Camera Sony 1/3 CCD
    • Video TX 25MW CE legal
    • Radiolink AT9 radio with receiver
    • Charger 50w
       
    •     Recommended accessories:
    •     Battery : LiPo 3S 1000-1600 mAh (not included)
    •     Radio system
    SKU: ETB250ARTF
    €399.90
    inc. VAT

     LOW STOCK
  • eTURBINE 250 FPV racer quadcopter BnF combo

    eTURBINE 250 FPV racer quadcopter BnF combo

    e-TURBINE 250 FPV racer quadcopter is a small size Multicopter made for racing and funfly! This combo is including the Lipo battery, Camera, Video tx 25mw with cloverleaf/ Spyro Antenna for increased range.

    In general FPV racing, drones are equiped with a front looking camera and with a real-time broadcast system, so the pilot can watch the pictures with video goggles. In a forest, or on artificial obstacle courses, high speed FPV flying is a challenge when you fly alone, and became very addictive when you practice racing with other modelers. Remember the famous pursuit on the moon of Endor, in the forest, in Star Wars movie. That's what you can expect! Spare propellers must be expected, but quad racers are very strong and withstand the crashes against obstacles, ground or other competitors' models.

    This quadracer is delivered as a combo, see below what is included.


    The four 2204 brushless motors and four 12A ESCs are included, and you will also find the CC3D flight controler. Two high intensity 3W front LEDs will be usefull to fly in the dark, and a rear LEDs strap will help your colleagues  to see you and to avoid a contact.

    Just Add radio, and your own charger, or get one from us and you ready to go.

    Specifications:

    • Dimensions : 250 size machine
    • Flight time : 8 - 13 min
    • Weight incl. controller, no lipo- 403 gr

    Included in the set:

    • Motors : 4 x TB2204
    • ESCs : 4 x 12A
    • Propellers : 4 props 5 x 3"
    • Flight contoller:CC3D
    • Lipo pack 3s 1300 - 1350
    • FPV camera 600+TVL
    • Video TX 25mw
    • Cloverleaf-Spyro TX Antenna
    • Front LEDs : 2 x 3W white
    • Tail light : 140 mm LEDs strip. Steady and 5 flashing modes. 8 intensity levels.

        Recommended accessories:

    • Your own radio
    • Lipo charger
    SKU: ETB250BNF
    €329.00
    inc. VAT

     LOW STOCK
  • eTURBINE 250 FPV racer quadcopter Combo with Carry bag, Camera, Video TX

    eTURBINE 250 FPV racer quadcopter Combo with Carry bag, Camera, Video TX

    e-TURBINE 250 FPV racer quadcopter is a small size Multicopter made for racing and funfly!
    In general FPV racing,Drone is equiped with a front looking camera and with a real-time broadcast system, so the pilot can watch the pictures with video goggles. In a forest, or on artificial obstacle courses, high speed FPV flying is a challenge when you fly alone, and became very addictive when you practice racing with other modelers. Remember the famous pursuit on the moon of Endor, in the forest, in Star Wars movie. That's what you can expect ! Spare propellers must be expected, but quad racers are very strong and withstand the crashes against obstacles, ground or other competitors models...

    This quadracer is delivered as a kit, with a heavy duty carbon fiber/Metal frame. The four 2204 brushless motors and four 12A ESCs are included, and you will also find the CC3D flight controler. Two high intensity 3W front LEDs will be usefull to fly in the dark, and a rear LEDs strap will help your colleagues  to see you and to avoid a contact.

    Radio, Lipo, Charger, Camera, Video tx and you ready to go.

    Specifications: Please read carefull since our combo providing more value for money !

        Dimensions : 250 size machine
        Flight time : 8 - 13 min
        Weight incl. controller, no lipo- 403 gr

    Included in the set:

    • Motors : 4 x TB2204
    • ESCs : 4 x 12A
    • Propellers :4 props 5 x 3"
    • Flight contoller- CC3D
    • Front LEDs : 2 x 3W white
    • Tail light : 140 mm LEDs strip. Steady and 5 flashing modes. 8 intensity levels.
    • E-turbine Carry bag
    • Camera Sony 1/3 CCD
    • Video TX 25MW CE legal

        Recommended accessories:

    •     Battery : LiPo 3S 1000-1600 mAh (not included)
    •     Radio system
    SKU: ETB250COMB1
    €279.00
    inc. VAT

     LOW STOCK
  • eTURBINE 250 FPV racer quadcopter kit: Motors,ESC, Leds, CC3D

    eTURBINE 250 FPV racer quadcopter kit: Motors,ESC, Leds, CC3D

    e-TURBINE 250 FPV racer quadcopter is a small size Multicopter made for racing and funfly!
    In general FPV racing,Drone is equiped with a front looking camera and with a real-time broadcast system, so the pilot can watch the pictures with video goggles. In a forest, or on artificial obstacle courses, high speed FPV flying is a challenge when you fly alone, and became very addictive when you practice racing with other modelers. Remember the famous pursuit on the moon of Endor, in the forest, in Star Wars movie. That's what you can expect ! Spare propellers must be expected, but quad racers are very strong and withstand the crashes against obstacles, ground or other competitors models...

    This quadracer is delivered as a kit, with a heavy duty carbon fiber/Metal frame. The four 2204 brushless motors and four 12A ESCs are included, and you will also find the CC3D flight controler. Two high intensity 3W front LEDs will be usefull to fly in the dark, and a rear LEDs strap will help your colleagues  to see you and to avoid a contact.

    Radio, Lipo, Charger, Camera, Video tx and you ready to go.

    Specifications:

        Dimensions : 250 size machine
        Flight time : 8 - 13 min
        Weight incl. controller, no lipo- 403 gr

    Included in the set:

    • Motors : 4 x TB2204
    • ESCs : 4 x 12A
    • Propellers :4 props 5 x 3"
    • Flight contoller- CC3D
    • Front LEDs : 2 x 3W white
    • Tail light : 140 mm LEDs strip. Steady and 5 flashing modes. 8 intensity levels.

        Recommended accessories:

    •     Battery : LiPo 3S 1000-1600 mAh (not included)
    •     Camera : Flat 600+TVL
    •     TX video system 25mw for Belgium, others countries must check their regulations to comply.
    SKU: ETB250KIT
    €199.00
    inc. VAT

     LOW STOCK
  • eTURBINE 250 racer CC3D flight controller

    eTURBINE 250 racer CC3D flight controller

    eTURBINE 250 racer CC3D flight controller

    SKU: TB-250-CC1
    €29.90
    inc. VAT

     IN STOCK
  • eTURBINE 250 racer Chassis foam protection

    eTURBINE 250 racer Chassis foam protection

    eTURBINE 250 racer Chassis foam protection

    SKU: TB-250-BF1
    €2.00
    inc. VAT

     IN STOCK
  • eTURBINE 250 racer Front LED with aluminium support

    eTURBINE 250 racer Front LED with aluminium support

    eTURBINE 250 racer Front LED with aluminium support

    SKU: TB-250-FL1
    €15.90
    inc. VAT

     IN STOCK
  • eTURBINE 250 racer Lower composit deck with Power distribution Board

    eTURBINE 250 racer Lower composit deck with Power distribution Board

    eTURBINE 250 racer Lower composit deck with Power distribution Board

    SKU: TB-250-DB1
    €16.90
    inc. VAT

     LOW STOCK
  • eTURBINE 250 racer RED Battery strap

    eTURBINE 250 racer RED Battery strap

    eTURBINE 250 racer RED Battery strap

    SKU: TB-250-BT1
    €1.00
    inc. VAT

     IN STOCK
  • eTURBINE 250 racer Upper carbon deck

    eTURBINE 250 racer Upper carbon deck

    eTURBINE 250 racer Upper carbon deck

    SKU: TB-250-CM1
    €14.90
    inc. VAT

     IN STOCK
  • eTURBINE Carry Bag for FPV and Smll racers

    eTURBINE Carry Bag for FPV and Smll racers

    eTURBINE Carry Bag for mode 260 size racers, fit also other racers. very nice protection bag, must for every one
    SKU: ETB-PB1
    €27.00
    inc. VAT

     IN STOCK
  • eTURBINE cnc Alumunium Frame insert (4pcs) for TB250 racer

    eTURBINE cnc Alumunium Frame insert (4pcs) for TB250 racer

    eTURBINE cnc Alumunium Frame insert (4pcs) for TB250 racer
    Included - set of 4 pcs, red color

    SKU: TB-250-AS1
    €2.50
    inc. VAT

     IN STOCK
  • eTURBINE Diatone Blades 5x3 Prop for TB250 racer quadcopter

    eTURBINE Diatone Blades 5x3 Prop for TB250 racer quadcopter

    Spare eTURBINE Diatone Blades 5x3 Prop for TB250 racer quadcopter, 4pcs.

    SKU: TB-250-BL1
    €3.50
    inc. VAT

     LOW STOCK
  • eTURBINE Motor TB2204 CCW for TB250 racer

    eTURBINE Motor TB2204 CCW for TB250 racer

    eTURBINE Motor TB2204 CCW for TB250 racer

    1 Motor included.

    SKU: TB-250-MR1
    €15.90
    inc. VAT

     IN STOCK
  • eTURBINE Motor TB2204 CCW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CCW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CCW for TB250 racer, this is more Flat version of the motor. Certain batches delivered with those motors.

    1 Motor included.CCW version

    SKU: TB-250-MR2
    €16.90
    inc. VAT

     IN STOCK
  • eTURBINE Motor TB2204 CW for TB250 racer

    eTURBINE Motor TB2204 CW for TB250 racer

    eTURBINE Motor TB2204 CW for TB250 racer

    1 Motor included.

    SKU: TB-250-ML1
    €15.90
    inc. VAT

     IN STOCK
  • eTURBINE Motor TB2204 CW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CW for TB250 racer, this is more Flat version of the motor. Certain batches delivered with those motors.

    1 Motor included.CW version

    SKU: TB-250-ML2
    €16.90
    inc. VAT

     IN STOCK
  • eTURBINE Multicopter ready ESC 12Amps for TB250 racer

    eTURBINE Multicopter ready ESC 12Amps for TB250 racer

    eTURBINE Multicopter ready ESC 12Amps for TB250 racer

    1 ESC included.

    SKU: TB-250-EC1
    €11.90
    inc. VAT

     IN STOCK
  • eTURBINE Optional Aluminium upper deck plate RED for TB250 racer

    eTURBINE Optional Aluminium upper deck plate RED for TB250 racer

    eTURBINE Optional Aluminium upper deck plate RED for TB250 racer.

    RED anodized

    SKU: TB-250-AM1
    €11.90
    inc. VAT

     IN STOCK
  • eTURBINE Quadcopter Rear LED Ice Blue & controller

    eTURBINE Quadcopter Rear LED Ice Blue & controller

    eTURBINE Quadcopter Rear LED Ice Blue & controller

    140mm long, however can be used for Any machine.

    Controller allows 8 different modes of Light, the LED is in Ice Blue color. Providing Excellent visibility at any time of the day.

    SKU: TB-250-BL1-ICEBLUE
    €16.90
    inc. VAT

     IN STOCK
  • eTURBINE Quadcopter Rear LED RED color & controller

    eTURBINE Quadcopter Rear LED RED color & controller

    eTURBINE Quadcopter Rear LED & controller.

    140mm long, however can be used for Any machine.

    Controller allows 8 different modes of Light, the LED is in Red color. Providing Excellent visibility at any time of the day.

    SKU: TB-250-BLC1
    €16.90
    inc. VAT

  • eTURBINE reinforced Arm for TB250 racer, 1pcs

    eTURBINE reinforced Arm for TB250 racer, 1pcs

    Replacement arm- motor mount for eTurbine TB250 racer, Made from Rigid plastic.
    Included - 1pcs

    SKU: TB-250-FA1
    €3.50
    inc. VAT

     IN STOCK
  • eTURBINE Screw set for TB250 racer

    eTURBINE Screw set for TB250 racer

    eTURBINE Screw set for TB250 racer

    SKU: TB-250-PB1
    €2.80
    inc. VAT

     IN STOCK
  • eTURBINE Tri-Blade 5x3L Prop (CW & CCW) for TB250 racer quadcopter (1 set)

    eTURBINE Tri-Blade 5x3L Prop (CW & CCW) for TB250 racer quadcopter (1 set)

    eTURBINE Tri-Blade 5x3L Prop (CW & CCW) for TB250 racer quadcopter (1 set of 2 props)

    SKU: TB-250-P-LR
    €3.60
    inc. VAT

     LOW STOCK

Manufacturers