eRCmarket

Carbon fiber rod diameter 2mm x100cm long.

Carbon fiber rod 3mm lenght 80-90cm

Carbon fiber rod diameter 4mm x 100 cm long.

Carbon fiber rod diameter 6 mm, 100 cm long.

Set of 2 pieces, fits 2mm carbon push-rod. Need to be glued with Epoxy glue.

Couple of grams only, very Strong landing skids 6mm .
Most durable set ever, see the picture of the struts test with 20KG step on it.
Suatable for 380-500 size helis

Carbon tail boom brace LOGO 600 SE

Carbon tube, 12x10, Length is 1 meter
Very light and strong. Extremely Straight ( made by Arrow Technology)

Carbon tube, OD 4 mm xID 2mm .Very light and strong.
 Extremely Straight ( made by Arrow Technology) .
Can be used as a Boom, Support, and more.

Length: 1000cm

Carbon tube, OD 5.5mm xID 3mm .Very light and strong. Extremely Straight ( made by Arrow Technology) .can be used as a Boom, Support, and more.

Length: 1000cm

Carbon tube, OD 5mm xID 3mm .Very light and strong. Extremely Straight ( made by Arrow Technology) .can be used as a Boom, Support, and more.

LENGTH 1000mm

Carbon Tube 6x3mm (1000mm) .

Very light and strong.
Can be used as a Boom, Support, and more.

Lenght: 1000mm

Carbon tube, OD 7mm xID 5mm .Very light and strong. Extremely Straight ( made by Arrow Technology) .can be used as a Boom, Support, and more.

Length: 100cm

Carbon tube, OD 8mm xID 6mm .Very light and strong.
Extremely Straight ( made by Arrow Technology)
Can be used as a Boom, Support, and more

Lenght: 90cm

This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality.
Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size!

Description:

• Item name:  CC3D Atom/Mini CC3D/CC3D EVO
• Size (board only): 30mm x 17mm
• Size (in case): 22 x 38 x 12mm WxLxH
   

Features:

• The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.
• Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM.
• 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
• 4 layer PCB for superior electrical noise reduction and flight performance.
• Software support for Windows, Mac and Linux.
• Direct high speed USB support with no drivers required.
• Spektrum satellite receiver support.
• Futaba S-BUS hardware support.
• Innovative Flexi-port technology for superior port flexibility.
• 4Mbits on-board EEPROM for configuration storage.
• This OpenPilot CC3D Atom board also includes a high quality, protective case.
• Bent pin layout for easy connectors.

 
Package included:

1 x CC3D Atom flight controller
1 x 8 pin cable
1 x 4 pin cable
1 x 3m double-sided sticker
1 x antenna pedestal
1 x anti-vibration damper set

This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality.
Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size!

Description:

• Item name:  CC3D Atom/Mini CC3D/CC3D EVO
• Size (board only): 30mm x 17mm
• Size (in case): 22 x 38 x 12mm WxLxH
   

Features:

• The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.
• Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM.
• 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
• 4 layer PCB for superior electrical noise reduction and flight performance.
• Software support for Windows, Mac and Linux.
• Direct high speed USB support with no drivers required.
• Spektrum satellite receiver support.
• Futaba S-BUS hardware support.
• Innovative Flexi-port technology for superior port flexibility.
• 4Mbits on-board EEPROM for configuration storage.
• This OpenPilot CC3D Atom board also includes a high quality, protective case.
• Bent pin layout for easy connectors.

 
Package included:

1 x CC3D Atom flight controller
1 x 8 pin cable
1 x 4 pin cable
1 x 3m double-sided sticker
1 x antenna pedestal
1 x anti-vibration damper set

8 Pin spare cable for CC3D openpilot flight controller

Adaptor to fit Cellpro chargers to transfer to EH . this is an easy way to adapt to your current balancer adaptor.

1S High Current Ultra-Micro Battery Adapter Lead for Eflight lipo, such as MCPX, comes with bare wires 10cm, to be added to any multi or charging cable.

Made from High quality 2.5mm wire, Factory installed.

Silver plated banana jacks, excellent item to upgrade your current charging cable.

Clear Lens Safety Glasses  (1 pair) with silicone comforts

Protect From:

• Blunt impact
• Radiation
• Splashes and droplets
• Dust
• Small dust particles

Circular Polarization is one of the biggest step forward in the progression of the FPV experience of the last few years. It has improved signal reception on all bands and brought 5.8Ghz video from one of the least practical systems to now one of the best.

This is a 5.8Ghz Cloverleaf antenna for your transmitter and receiver.  A plastic enclosure is included to stop the antenna from being bent or damaged.  The connection on this antenna is a SMA type connector.

A cloverleaf antenna has 3 distinct lobes on it.  Is is usually used to connect to your transmitter unit that is onboard your multicopter or aircraft.  This is an omni-directional antenna so you might have some signal loss when you are flying directly above the receiver as this antenna does not rediate directly below or above the antenna axis.  However overall the cloverleaf antenna is the best type to use for your transmitter.
Cloverleaf Antenna Specifications

Set of TX and RX antennas Included!

•   Gain: 5dBi
•   Antenna connector: SMA Plug
•   Standing wave ratio(SWR): <1.5
•   Length: 8cm
•   Weight: 12.5g

The Precision CNC Aluminum Main Blade Grip set is designed to improve stability, durability and performance on the helicopter. It's directly replaced the stock plastic main grip. The Precision CNC Aluminum Main Blade Grip set is machined with high tolerance from aircraft aluminum to achieve the best possible precision and using triple non-shield type ball bearing for the Aluminum Main Blade Grips to avoid stripping and to perform efficiently under high RPM and 3D maneuver condition On mcpx flybarless head system. And yet, the Aluminum Main Blade Grip design allows pilot to set damping from soft to hard to fit your best flying style. Threaded steel ball join is also used to prevent wear and tear for long time use. More than that, the Precision CNC Aluminum Main Blade Grip set is very light weight 0.12gram lighter than stock plastic grip while equipped with triple ball bearing and threaded steel ball join. The Aluminum Main Blade Grip design will bring the best performance and the best look to your helicopter.

Includes

•    2 x Precision CNC Aluminum Main Blade Grip
•    6 x Non-Shield Ball Bearing
•    2 x Damper Spacer (Soft)
•    2 x Damper Spacer (Hard)
•    2 x Threaded Steel Ball Join
•    Hardware

Suitable for 6mm CARBON tubes.
Set of 4

*If you need tubes, please order set of 2 tubes 6mm

 

Fuel Pipe Y-Junction (1 PC)
Hub Color: blue

CNC servo Arms, avaliable for Hitec, JR, Futaba.Pack including 1 arm ( choose Arm options)

CNC tail Metal Gearbox for Robbe, fits Millenium60-90, Futura nova( 24mm) , Cuatro.

• Anodized in Natural color.
• Fits 24mm booms, with special CNC made smoother gear.
• Ratio- 1:1  
• This gearbox is Lighter then stock plastic gearbox
• Beautiful and strong 1 piece design. Set complete with Ball bearings, Hardware, and pinions
• Can be mounted Left or Right side.
• Double Tail scissor arm set included with the gearbox ( 64 eur value )
• Note:Tail Output Shaft and Plastic
• Tail Bridge S1038 are not included in the kit!

This gearbox and all parts of it are produced in Europe.From now this is the most affordable and best gearbox

Fusuno offers a very affordable price, beautiful and high quality canopies at very attractive price. This is the completely new shape canopy which is constructed of high quality new Composite. This canopy is specifically designed to fit well on the 130x

Connector set Hubsan

In the mood for race with obstacles? ERCmarket presents its custom designed FPV Air Race flags, to make your race even more exciting!

Specifications:

• Size:
  • Flagpole: 280 cm
  • Flag: 250(h) x 50(w) cm
• Material: digital flag fabric, aluminium flagpole, with ground spike mount

Includes:

• 1x Flag
• Ground Mount
• Transportation bag
• Instructions for set-up

In the mood for race with obstacles? ERCmarket presents its custom designed FPV Air Ring Race Gates, to make your race even more exciting!

Specifications:

• Size: 200(outer) x 150(inner) x 304(h) cm
• Material: digital flag fabric aluminium flagpole

Includes:

• 1x Flag
• 2x Ground mount
• 1x Securing rope
• 4x Nail
• Transportation bag
• Instructions for set-up

In the mood for race with obstacles? ERCmarket presents its custom designed FPV Archer Air Race Gates, to make your race even more exciting!

Specifications:

• Size: 200(w) x 120(h) cm
• Material: digital flag fabric aluminium flagpole

Includes:

• 1x Flag
• 2x Ground Mount
• Transportation bag
• Instructions for set-up

Damping Mount Kit for DJI Phantom 76061004

Item Description:

DJI PHANTOM is an incredible product for aerial photography, customers can use GoPro to shoot many beautiful pictures; just some customers found the picture sometimes has jello effect due to vibration issue of PHANTOM. Users could solve this problem through reducing GoPro resolution; however, each PHANTOM has different situation, some vibration could be too serious to be solved even reducing the resolution. There are dampers added between GoPro and PHANTOM to absorb vibration, the dampers included in the package is the softest one We also provide different hardness dampers, that you can purchase dependant upon your demands. Also, the adapter has been lengthened so customers can install an AV transmitter separately for FPV flight and real-time monitoring.

Japan made Stainless steel caliper. Precision without compromise.

Features:

* Manual power on/off
* Metric/Inch conversion.
* Zero setting at any position
* SPC output.
* Easy measurement of narrow grooves.

Size: 6"/ 150mm, Precision 0.01mm

DIN912 M1.6 X 12mm Cap Head Screws - Stainless Steel A2
Set of 10 pcs, Black galvanized color

DIN912 M1.6 X 20mm Cap Head Screws - Stainless Steel A2
Set of 10 pcs