AVIZAR

Don't have the battery slip out while flying out of the switch or just lock in the servo extensions securely
Clip for servo connector or extension lead joint, to prevent the connection breaking under outside force.

10pcs in set

colors:

• Blue
• Purple
• Yellow
• Green
• Black

• Lock Clips prevents Servo Extenstion Connections From disconnection in the air, best connector Insurance
• Loghtweight and stable will not impose any burden on your model
• Could Save Your model From A Costly Crash If A Servo Becomes Un-Plugged
• Easy to Install,Fit All Servo Extensions Including JR, Futaba, Hitec, Spektrum, Airtronics, etc.

Set of 10.

Choice of colors

Servo Lever Carbon fiber arm 20mm Type A for Futaba

Specifications:

• The high-quality carbon fiber plastic is optimally matched to this servo arm.
• With a weight of 1g he is only half the weight of aluminum, with the same strength.
• The internal gear is manufactured with precision for displayed under "Versions" servo types.
• Due to the smaller mass, compared to aluminum and a plastic own damping the transmission of the servos work longer play.
• The bores of the servo lever be 1.5 mm, so it is possible to screw a screw M2 readily.

 

Servo Lever Carbon fiber arm 38mm Type A for Futaba

Specifications:

• The high-quality carbon fiber plastic is optimally matched to this servo arm.
• With a weight of 2.4 g it is only half the weight of aluminum, with the same strength.
• The internal gear is manufactured with precision for displayed under "Versions" servo types.
• Due to the smaller mass, compared to aluminum and a plastic own damping the transmission of the servos work longer play.
• The bores of servo arms are 2.6 mm, it is readily possible to screw a screw M3.

 

Servo Lever Carbon fiber arm 38mm Type B for Futaba

Specifications:

• The high-quality carbon fiber plastic is optimally matched to this servo arm.
• With a weight of 2.4 g it is only half the weight of aluminum, with the same strength.
• The internal gear is manufactured with precision for displayed under "Versions" servo types.
• Due to the smaller mass, compared to aluminum and a plastic own damping the transmission of the servos work longer play.
• The bores of servo arms are 2.6 mm, it is readily possible to screw a screw M3.

 

There will be a time when you strip out a wire from your servo extension plug or you simply need to shorten a servo lead to make your model neater and keep your wires away from moving parts. There are 10 sets of Male and Female connectors provided which can be used to create/repair Servo leads and Extensions.

Great for servo replacements or for making your own servo extensions.

This a set of 10 Sets of Housings (plugs). Each set comes with 10 x Male( 2 housings, and 10 x Female) and Comes complete with 30 gold Male and Female pins.

So you will get a total of 30 housings, and 60 Pins( 30M+30F). You will need your own Crimp tool (can be purchased separately)

This product is Made in Germany

Shim Washer Din 988 10x16x0.1mm (10 pcs)

Shim Washer Din 988 10x16x0.2mm (10 pcs)

Shim Washer Din 988 10x16x0.5mm (10 pcs)

Shim Washer Din 988 10x16x1.0mm (10 pcs)

Shim Washer Din 988 8x14x0.5mm (10 pcs)

Shim Washer Din 988 8x14x1.0mm (10 pcs)

Dial gauge/indicator a measuring instrument in which small displacements of a spindle or a lever are magnified by suitable mechanical means to a pointer rotating in front of a circular dial having a graduated scale.

its a precision tool that can measure tolerances, circular run out and total runout, straightness,circularity, cylindricity, and much more

Therefore, this instrument becomes a critical part to monitor the quality of product dimensions and any other equipments in the workshop.

This item is incredibly important in Helicopter modelling, but not only, basically in every turning part mounted on the engine, regardless if its Nitro, Gas or others.

Using this tool will allow you to make sure that the clutch bell or Shaft, spindles, and any other turning parts ( excluding Pinions) are perfectly produced and aligned. when engine ior mechanics are turning with high rpm,even small difference runout can be turned to gigantic vibration, and vibration is known to kill any thing possible around it. we have seen things hapenning, therefore we do strongly advise to use this tool.

Specification:

• Steel body
• Jeweled
• Rack shockproof
• Inside tolerance
• Semi-seal cap
• Plastic flat back
• Precision: 0.01mm
• Diameter :40mm
• Measurement range : 0-5mm

Silentblock M4x15mm set (4 pcs)

Vibration dampener set for M4 threads.
Suitable for installation of modules e. g. current supplies inside the model.
The vibration dampeners ensure good cooling and vibration-free mounting.

Specification:

• Overall Size Height-15mm
• Thread: M4 male and female( hole)
• Diameter:15mm
• Color: Black
• Produced in Germany
  

Specially used Silicone Nitro fuel line 5x8mm for Pumps and field boxes

• 5mm ID
• 8mm OD
• Length of 1m
• Transparent or translucent
  

Silicone Wire - Heavy gauge extra flex silicone wire for powerful motor and battery wiring. We believe this is the best wire.

1.5 mm2 16awg Red 1meter

Silicone Wire - Heavy gauge extra flex silicone wire for powerful motor and battery wiring. We believe this is the best wire.

1.5 mm2 16AWG Blue 1 meter

Highly flexible Silicone wire - 2.5 mm², equal to 14 awg, multi-strand

Best to use up to 60-70 amps applications. excellent as a extension for ESC or Battery.

Set of 1meter

Choose your color, Black, Blue, Red

Produced in Germany 

This is a low resistance Silicone wire - 4.0 mm2 12AWG - able to pass over 100 amp.

Those cables are high quality to weight, Made in Germany, using multi-strand flex silicone isolation.

Set of 1m, Black + 1m Red color. Made in Germany

CNC Silver aluminium Grommet for 450 Size Helicopters

• Constructed of highest quality aluminum and long lasting rubber.
• Hold your canopy tighter in your helicopter.
• Easier to uninstall yet preventing damaging to your canopy.
• Durable and multiple re-use.

Package includes:
2 x aluminum canopy grommets

Assembly Instruction: It's recommended to use a reamer to enlarge canopy mounting holes to fit the aluminum grommet.

Silver Metal canopy Grommet ring nuts 500-800 class

• Constructed of highest quality aluminum and long lasting rubber.
• Hold your canopy tighter in your helicopter.
• Easier to uninstall yet preventing damaging to your canopy.
• Durable and multiple re-use.

Package includes:
2 x aluminum canopy grommets

Assembly Instruction: It's recommended to use a reamer to enlarge canopy mounting holes to fit the aluminum grommet.

The Third Hand quickens soldering, electronics, and DIY projectsallowing you to finish your work faster than ever before!

Our Third Hand makes positioning a breeze with Six flexible arms.

Specifications:

6 flexible arms each with a large swiveling alligator clip.
6+1 pockets in beautifully base to hold loose components.
6 Silicon clip tips for the ultimate heat resistance.
6 Removable feet for a stable standalone operation.
Integrates perfectly with base mounts.

Sky hero Little Six Avizar combo , and including the following:

This setup is made for 4S lipo, normal flying

• 1 x Sky hero Lilltle 6 Frame Set
• 6 x AVIZAR Motor
  
• 6 x  props 10-11"
• 6 x AVIZAR HVSK-40A speed controllers Power wires

Need for speed? this is the version you lookin for.
Sky hero Little Six Avizar combo will be delivered once the frames are availiable, and will include the following:

This setup is made for 6a lipo, Speed version Only. this will be the Insane machine, so be sure you know how ot fly

• 1 x Sky hero Lilltle 6 Frame Set
• 6 x AVIZAR Motor 6S special MC2834 or 3530
• 6 x  props 9-10"
• 6 x AVIZAR HVSK-40A5 6s speed controllers Power wires

For those who want a beautiful look, we offer the set of parts to make your OB1 set looking Cool. SET inclusive of camera mount, 3d printed. Choice of colors can be chosen, White, Black, Green, Orange, Purple. Surface can be treated to be smooth or matte.

For those who want a beautiful look, we offer the set of parts to make your OB1 set looking Cool.

SET inclusive of Canopy(1) and Motor mounts (4).

Choice of colors can be chosen, White, Black, Green, Orange, Purple.

Surface can be treated to be smooth or matte.

Sky hero Spy/der Tuning Conversion Kit is a set of Clamps and Spacers, Allowing you many benefits from the building process till the maintenance.

New- Spacers now delivered are CNC made, lightweight 7075 Alu, silver anodized

What will you gain with this set?

• Lightweight concept structure, increase the robustness of the frame structure.
• Simple assembly, with this set- your motor arms will never fall down, even when you disasseble the main frame.
• Easy access and maintenance of the machine, when disassemble process is needed.
• Clamps will provide you much stronger support for heavy lift.
• ABS made spacers will provide you with higher place inside the frame, allow installation of more components, especially in Spy and Spyder version.
• Spacers are much stronger than originals. Holes will allow you easy wiring In and out where needed.
• Better cooling in certain weather conditions.
• Virtually unbreakable parts! tested in stress and crash test.

What is included?

- Based on the version of the machine, e.g Spy or Spyder 4/6  you will get complete set of CNC Spacers, and Clamps needed to replace your current parts.

• Spy :Set of 3 Spacers, 6 clamps, Hardware
• Spyder 4/8 :  Set of 5 Spacers, 8 clamps, Hardware
• Spyder 6 : Set of 6 Spacers, 12 clamps, Hardware

Hardware is included.

- Note- we recommend this kit for " Handy people" and assemblers of drones.
- You will need to drill some extra holes for the clamps.

 

Slim BLHeli 40A Speed controller For mulicopters, Oneshot125 Ultra high speedcompatible.

Very slim, only 17m wide, can go virtually any size of arm to fit 450+ size machines

• Input voltage: 2-6s Lipo
• BEC: Opto, no bec
• Signal frequency: 20-500Hz/ Oneshot125 Ultra high speed
• Firmware: BLHeli
• Type:BLHeli Bootloader & Firmware
• Size(mm)L*W*H: 17*60*7.2mm
• Weight: 20.5g

 
Features:
Those are Slim series with advanced processor, the basic frequency up to 50MHz and processing capacity is faster to support high KV motor.
Specially for Multi-copter, Fastest throttle respond
Throttle signal is a twisted pair cable, reducing the signal crosstalk effectively .
New miniaturization and ultra-low resistance MOSFET, powerful flow resistance, and professional MOS Drive chips to improve efficiency. PCB board processed with special thickness treatment, low resistance and calorific value, higher impact resistance.
Support refresh rate of throttle signal maximum up to 500Hz, compatible with all flight controls; Support ultra-high speed Oneshot125 and 3000Hz high refresh rate, fast response, better throttle liner and smooth shooting to be the first choice for multicopter and racing frame.
Throttle lever travel and other settings are available to be set by USB linker; Support two-way mode and 3D mode for racing frame.

*Some batches can have black color HeatShrink, since its stronger when placed inside the arms, and easier to install on carbon frames due the same color.

SMA Plug to RP-SMA Jack adaptor, 90 degree version Basically its Pin to Pin adaptor, so if you have antenna and video tx with both side Hole- this is the adaptor you need

Scope of delivery- 1 adaptor

Please see the DIAGRAM below to understand your desired connection

SMA Plug to RP-SMA Jack adaptor. Basically its Pin to Pin adaptor, so if you have antenna and video tx with both side Hole- this is the adaptor you need

Please see the DIAGRAM below to understand your desired connection

Sony Action came Brushless gimbal for 2 axis .Designed and Produced in EU
Fits Sony Action cam( long format) ASXX
Comes with Absorber dampening plate.
Controller not included.

This is a canopy for Sky hero Spyder, Made from ABS material.

Virtually Unbreakable, Flexible and virtually unbreakable compared to traditional Fiberglass . Made from same material as famous Suitcases, this is the best choice for your machine.

Weight is 56 Grams only.

Camouflage Blue look, with Matt finish.

This is a canopy for Sky hero Spyder, Made from ABS material.

Virtually Unbreakable and Flexible compared to traditional Fiberglass canopy . Made from same material as famous Suitcases, this is the best choice for your machine.

Weight is 56 Grams only.

Black Carbon finish

Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

This wrench will fit from Glow plug removal to Motor nut replacement.
Wrench sizes are : 5.5mm 7mm 8mm 10mm 17mm

Stainless Screw Self tapping 2.3x10mm, 10 pcs

Stainless Screw Self tapping 2.5x12mm, 10 pcs