Flybar rod x 2(m3x440mm)

Use for T-REX 550E/600E/600N/600E PRO

New Torque Tube Front Drive Gear Set RED

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque

Use for T-REX 550 / 600

Suitable for all 550 class machines. Suitable for all 600 class machines. Suitable for all 700 class machines.

Align T-Rex 550-700 Plastic Servo Holder nuts , Set of 10

Use for T-REX 550 / 600 / 700 / 760 / 800 with Tri-Blade Rotorhead

A replacement package of Align Tri-Blade Linkage Rods & Ball Links. Suited for use with the T-Rex 700E helicopters, and T-Rex 550X Helicopters.

Content

• 5x 700X Counter Thread Linkage Rod A
• 10x 700 Elevator Ball Link
• 10x 700DFC Linkage Rod Holder

Align T-Rex 550/600 Feathering Shaft

Use for T-REX 550(L)/600.

Must with:

• F8-14MThrust Bearing(H60R001XXW)
• 600E PRO Feathering shaft x 2(F8x92.2mm)
• Washer x 4(F5xF12x1mm)
• Socket screw-black x 4(M5x10mm)

T-Rex 550/600/700/800DFC Ball Link

To satisfy the needs of those who need more flight movement travel limit, this linkage ball enables 3GX and APS gyro to expand the travel limit and compensation gain.
Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.

Specification:

• Dia.5 Linkage Ball D(M3x3.5) x 2
• 700N Elevator ball link x 4
• 700DFC Linkage rod holder x 4

Use for T-REX 800DFC/700DFC/600DFC/550DFC.
Use for 600DFC CCPM Metal Swash plate (H60248).
Use for 700DFC CCPM Metal Swash plate (H70098).

Align T-Rex 550E/600 Tri-Blades CCPM metal swashplate H55H011X

Tri-Blades CCPM Metal Swashplate

* CCPM metal swashplate set × 1
* Long Linkage ball (M3x4) × 1(5x28mm)
* Linkage ball D (M3x3.5) × 1(5x9.3mm)
* 700N Linkage ball B (M3x4) × 5(5x12mm)

550E Main Shaft

Main Shaft Set (2pcs) suitable for Align T-REX 550F

Includes:

• 550FL Main shaft x 2(Φ6x11.8x190mm)
• Socket collar screw x 2(M3x19mm)
• M3 nut x 2

Use for T-REX 550.

Newly style stabilizer brings you whole new visual delight.

550L Carbon Fiber Vertical Stabilizer x 1

Vertical Stabilizer Mount x 1

The NEW T-REX 550X is definitely a significant leap forward in performance, enhanced by increased power, the integration of numerous innovative design changes, and lightweight improvements. The T-REX 550X performance is outstanding!

The brand new FL Flybarless Rotor Head System utilizes an extremely low CG design, reducing resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 550X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. In addition, the T-REX 550X's lightweight design is 200~250g (Combo250g/Super Combo 200g) lighter than our pervious model, this effectively increase the power and improves flight time.

The T-REX 550X utilizes the powerful 730MX (960KV) motor and our RCE-BL100A Brushless ESC which both are highly efficient providing superior power, improving the performance of the 6S power system. The NEW DS820/DS825 high voltage brushless servos are extremely efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

With improved performance and increased power, as well as included top of the line electronic equipment. The new T-REX 550 X will arouse your enthusiasm and devotion to the T-REX Family.

Specifications :
Length: 1163mm
Height: 344mm
Width: 196mm
Main Rotor Diameter: 1248mm
Main Blade Lenght: 550mm
Tail Rotor Diameter: 254mm
Motor Drive Gear: 16T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 131T
Tail Drive Gear: 34T
Drive Gear Ratio: 7:1:3.85
Weight (w/o power system): 2590g

Content :

• 1x T-REX 550X DOMINATOR
• 2x 550 Carbon Fiber Blade
• 2x 90mm 3K Carbon Fiber Tail Blade
• 1x 730MX Brushless Motor (960KV)
• 3x DS820 High Voltage Brushless Servo
• 1x DS825 High Voltage Brushless Servo
• 1x RCE-BL100A Brushless ESC

Required for assembly :

• 1x Transmitter (7-channel or more,helicopter system)
• 1x Receiver (7-channel or more)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 2600~5200mAh battery

Use for T-REX 600 FBL System.extreme 3D flying

The 600 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

Specifications:Shape: Symmetrical wing

• Length:600x55x7.15mm
• Width:12mm
• Shaft Diameter:4mm
• Weight:ApproX 270g/set

Use for T-REX 600 FBL System.extreme 3D flying

The 600 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

Specifications:Shape: Symmetrical wing

• Length:600x55x7.15mm
• Width:12mm
• Shaft Diameter:4mm
• Weight:ApproX 270g/set

This is a replacement Align Metal Stabilizer Belt, and is intended for use with the Align T-REX 600 and 600N.

(1) Stabilizer mount (Upper)

(1) Stabilizer mount (Lower)

(1) 3K carbon horizontal stabilizer

(2) Socket collar screw (3x22mm)

(2) Socket screw (3x8mm)

(4) 3mm specialty washer (3x8x2mm)

Suitable for T-REX 600DFC

6061-T6 Aluminum alloy material and CNC processed.

Specification:

600DFC Main rotor grip arm integrated control link x 2

683ZZ Bearing x 4

700DFC Linkage rod A(M3x14mm) x 2

700N Elevator ball link x 2

Utilizes dual point attachment design for zero play and higher precision control feel.

Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more precise and smooth.

6061-T6 Aluminum alloy material and CNC processed.

Use for T-REX 600E/EFL PRO.

T-REX 600N V2.

T-REX 550E/E 3GX V2.

Specification:

I-shaped Arm × 1

Mount Link × 1

Metal plate(R) × 1

Bearing MR105ZZ × 1(Φ5xΦ10x4mm)

Bearing holder × 1(13.5x12.5x9.5mm )

Linkage ball A(M2x3.5) × 1(Φ4.75x8.18mm)

Tail control arm × 1(33.4x12.7x4mm)

Bearing holder × 1(Φ7x Φ8.3x3.5mm)

Bearing F682XZZ × 6(Φ2.5xΦ7.1xΦ2.6mm)

Bearing MR117ZZ × 2(Φ7xΦ11xΦ3mm)

Socket button head screw × 1(M3x5mm)

Socket button head screw × 6(M2.5x5mm)

New design of one-way bearing for preventing locking. Use for T-REX 600E PRO/600EFL PRO.

Replacing the HN6064

One-way bearing HF1216 x 1(12x18x16mm)

• Main gear case x 1
• Hex socket self tapping screw x 6(T3x6mm)
• One-way bearing shaft x 1(9x12x34.7mm)
• Washer x 1(11.5x18x0.8mm)

New design of one-way bearing for preventing locking.

• One-way bearing HF1216 x 1(12x18x16mm)
• Main gear case x 1(55x14.5mm)
• Hex socket self tapping screw x 5(T3x7mm)
• One-way bearing shaft x 1(9x12x34.7mm)
• Washer x 1

T-REX metal tail pitch assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight

Brand new tail gear box with higher material quality and easy maintenance.

Utilizes dual point attachment design for zero play and higher precision control feel.

Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more precise and smooth.

6061-T6 Aluminum alloy material and CNC processed.
Suitable for T-REX 550/600.

This is the 2 way fuel filter from Align. Suitable for use on the T-Rex 600N and 700N helicopters and other glo-fuel powered models. Includes a handy clip to close the fuel line preventing fuel from flooding an engine when it is not running.

Includes:

• Fuel filter (2-way) 1pcs
  
• Filter mesh 1pcs
  
• Fuel tube clip B  1pcs

Fuel tube x 1 (D2.5xD4x1000mm)

Use for T-REX 600E PRO

Specification:

Ball link x 14
600PRO Ball link x 4
Elevator ball link x 1

Align T-Rex 600N Hook And Loop Tape # HN6023, (set of 5pcs)

Hook and loop tape x 2(15x250mm)

Hook and loop tape x 3(10x200mm)

Use for T-REX 550/600/XN

Brand new design for 600 Feathering Shaft, both ends of shaft increased thickness from 6mm to 8mm, so its whole external diameter is equal in 8mm thick, which can effectively enhance strength of main rotor system. In addition, adopted M2.5x6mm screws also redouble its intensity to meet its upgrade strength.

Use for:

• T-REX 600XN

Carbon fiber material

Content:

• 1x 600XN Bottom Plate

Use for:

• T-REX 600XN

Stainless steel material / Rubber material

Content:

• 2x 600XN Canopy Support
• 2x 600N Canopy Support Washer

 

Use for:

• T-REX 600XN

Carbon fiber material

Content:

• 1x 600XN Carbon Fiber Main Frame (Lower side)

●600XN Carbon Fiber Main Frame(Upper side) x 1

●M2.5 Cone Nut x 8

●700X Frame Washer x 1

Use for:

• T-REX 600L / 600E / 600N / 600XN

Carbon fiber material / Glass fiber reinforced nylon material

Content:

• 1x 600XN Carbon Fiber Vertical Stabilizer
• 1x Vertical Stabilizer Mount

CCPM Metal Swashplate x 1

Bearing(6706ZZ) x 2(Φ30xΦ37x4mm)

Linkage ball B(M3x4) x 6(Φ5x12mm)

5 Long linkage ball(M3x4) × 1(Φ5x28mm)

Use for:

• T-REX 600XN

Aluminium alloy material

Content:

• 1x 600XN (44.4x47x20mm)
• 1x Bearing 695ZZ (5x13x4mm)

 

Use for T-REX 600XN.
Chromoly steel alloy material.

One of the most classic ALIGN models, the T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness.

Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision.

This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.

The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!

Features:
After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.

Landing skid is tilted 5 degree forward which improves crashworthiness.
Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.

The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.

Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.

Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.

The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.

CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.

Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.

High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.

Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.

Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.

Specifications:

• Length: 1152mm
• Height: 356mm
• Main Blade Length: 600mm
• Main Rotor Diameter: 1354mm
• Tail Rotor Diameter: 260mm
• Engine Pinion Gear: 20T
• Main Drive Gear: 170T
• Autorotation Tail Drive Gear: 180T
• Drive Gear Ratio (E:M:T): 8.5:1:4.5
• Fuel Tank Capacity: 440ccm
• Flying Weight Approx: 3400g

Content:

• 1x T-REX 600XN Kit
• 2x 600 Carbon Fiber Blade
• 2x 95 Carbon Tail Blades
• 3x DS820M Standard servo
• 1x DS825M Tail servo
• 3x DS530 Throttle servo
• 1x Govemor Sensor
• 1x B6M 2-In-1 Voltage Regulator

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 1x Engine starter
• 1x Flybarless system
• 1x Governor System (if not integrated in Flybarless System)
• 1x Digital pitch gauge
• 1x Fuel pump
• 1x Engine fuel
• 1x 50~60 Muffler
• 1x 50~60 Engine
• 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)

Use for T-REX 600XN.
Glass fiber reinforced nylon material.