Designed specifically for attaching the aerial photography gimbals to T-Rex 800E. The assembly features high rigidity to withstand the higher payload of aerial photography equipment and increase the stability during takeoff/landings. Specification: Skid Pipe A x 4 Skid Pipe B x 2 Skid Pipe C x 1 Skid Pipe x 2 800E upper landing gear mount x 2 Landing Skid T-type Mount x 6 Landing Skid Y-type Mountx 4 Socket collar screw x 4(M3 x 12mm) Socket collar screw × 4(M3x22mm) M3 nut - Silver x 4 M4 set screw - Black x 20

700E ESC Mount × 1(65.2x62x2mm) 800E ESC Mount × 1(102x65.2x2.5mm)

Must with H80T010XXT 800E Auxiliary battery mount set.

Specification:

• Auxiliary Battery Board (120x50x2mm) x 2

Specially designed auxiliary battery mount set to balance the helicopter when gimbal system is used, provides proper CG for better flight stability.

Dedicated APS sensor unit mounting platform to simplify installation.

Specification: Auxiliary Battery Board (100x40x2mm) x 2 Auxiliary Battery Mount Side Plate (100x19x2mm) x 2 Auxiliary Battery Boom Clamp– Left (58x8x59mm) x1 Auxiliary Battery Boom Clamp– Right (58x8x60mm) x1 Auxiliary Battery Boom Clamp(GPS) – Left ( 58x8x61mm ) x1 Auxiliary Battery Boom Clamp(GPS) – Right ( 58x8x62mm ) x1 GPS Mounting Plate (41x12x14mm) x1 GPS Mounting Mast (30x38x3.5mm) x1 Flat Head Socket Cap Screw (M2.5x6mm) x16 Socket collar screw(M3x20mm) x1 Socket collar screw(M2.5x8mm) x1 Strap x 2 Hook & Loop fastening tape x 4

Tail Control Guide sleeve × 1
Carbon Tail Control Rod sleeve × 2
Carbon Tail Control Rod × 1(Φ5x902.3mm)
Linkage Rod C × 2(Φ2.5x23mm)
700NFL Ball Link × 2

800E DFC Linkage rod A × 4(M3x29.3mm)
Elevator ball link × 4
Linkage rod holder × 4(Φ6xΦ4.85x3mm)

Elevator arm × 1(55.3x25.4x21mm)
Elevator lever × 1(5x21x24.5mm)
Elevator collar × 2(Φ3xΦ4.5x1.5mm)
Bearing HF683ZZ × 2(Φ3xΦ7x3mm)
Elevator ball link × 1
Linkage ball B(M3x4) × 2(Φ5x12mm)
M4 Set screw × 1(M4x4mm)
Socket button head screw × 2(M3x8mm)
Socket screw × 1(M3x8mm)

• 800E Metal Bottom Plate × 1(266x65x7.6mm)
• Socket button head screw × 6(M3x6mm)
• Socket screw × 4(M3x10mm)

800E Metal stabilizer belt(U) × 1(35x13x15.1mm)
800E Metal stabilizer belt(L) × 1(35x13x15.1mm)
Socket collar screw × 2(M3x22mm)
Socket screw × 2(M4x12mm)
M4 Washer × 2(Φ4xΦ10x1mm)
M3 Specialty washer × 2(Φ3xΦ8x2mm)

800E Tail boom mount(Left) × 1

800E Tail boom mount(Right) × 1

Hex mounting bolt × 4(Φ2.5x60.9mm)

Socket screw × 1(M4x8mm)

Socket button head collar screw × 8(M3x8mm)

T-Rex 800E Tail Control Guide

Torque tube × 1(8x918mm)
Bearing MR148ZZ × 2(8x14x4mm)

Torque Tube Bearing Holder × 2

For T-rex 500

Main drive gear(162T) x 2

Align 105 Carbon Fiber Triple Tail Blades (set of 3)

Specification:

• Shape: Symmetrical
• Width: 4.9mm
• Bolt Diameter: 3mm
• Weight: Approx 18g/set

Use for 700 size 3 Tail Blade Set.

Align 105mm Carbon Fiber Triple Tail Blades (2)

Specification:

• Shape: Symmetrical
• Width: 4.95mm
• Bolt Diameter: 3mm
• Weight: Approx 9.5g/blade

for use with T-Rex 650 / 700E / 700N / 700L / 700X / 760

Align 105mm Carbon Fiber Triple Tail Blades (2)

Specification:

• Shape: Symmetrical
• Width: 4.95mm
• Bolt Diameter: 3mm
• Weight: Approx 7/blade

for use with T-Rex 650 / 700E / 700N / 700L / 700X / 760

Use for:

• T-REX 500XT

Content:

• 1x 500XT Autorotation tail drive gear (M0.7)

Align 180T M0.6 Autorotation Tail Drive Gear set - Black

1 PCS IN SET

This is the 3 way fuel filter from Align. Suitable for use on the T-Rex 600N and 700N helicopters and other glow-fuel powered models it includes a third port to fuel and de-fuel through and a handy clip to close the carburetor fuel line to preventing fuel from flooding an engine during fueling or while it is not running.

Package includes:

• Fuel filter (3-way)
• Filter mesh
• Fuel tube clip B

Apply to Trex 450 all types Use 3K carbon fiber material, and unique forming technique, improve anti-twist, suitable for extreme 3D flight.

Specification:

• Shape: Symmetrical wing
• Length:325x32mm Width:4.7mm
• Shaft Diameter:3mm
• Weight: Appro 36g/set
• Black color
  

Apply to T-REX 450 series.

The 325 3K carbon fiber main blades are designed specifically for extreme 3D flying,
featuring both high agility and excellent stability characteristics.
The blades have brand new airfoil design, coupled with new painted graphics.
In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight.
The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

Specification:
 

• Shape: Symmetrical wing
• Length:325x32mm
• Width:4.7mm
• Shaft Diameter:3mm
• Weight: Appro 46g/set

Apply to T-REX 450 series.

The 325 3K carbon fiber main blades are designed specifically for extreme 3D flying,
featuring both high agility and excellent stability characteristics.
The blades have brand new airfoil design, coupled with new painted graphics.
In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight.
The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

Specification:

• Shape: Symmetrical wing
• Length:325x32mm
• Width:4.7mm
• Shaft Diameter:3mm
• Weight: Appx 46g/set
• Color- Blue
  

- Apply to Trex450 all types
- The 360 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

Suitable for Align T-REX 470L, PROTOS 380, Goblin 380...

The 380 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

Specification:

• Shape: Symmetrical wing
• Length:380x35mm
• Width:4.6mm
• Shaft Diameter:3mm
• Weight: Approx 70g/set

The 425 3K carbon fiber main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.
Use for T-REX 500 Flybarless System.

Specification:

• Shape: Symmetrical wing
• Length:425x42x5.6mm
• Width:10mm
• Shaft Diameter:3mm
• Weight:Approx 120g/set

The 425 carbon fiber Composites main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

Specifications:

• Shape: Symmetrical wing
• Length:425x42x5.6mm
• Width:10mm
• Shaft Diameter:3mm
• Weight:Approx 120g/set

 

Use for 500 SIZE HELIS.

Align 425K Carbon Fiber Blades Carbon Black utilizes unique compounding technology, features great performance for 3D and auto rotation flights.

Specification:
 

• Shape: Symmetrical wing
• Length:425x42x5.6mm
• Width:10mm
• Shaft Diameter:3mm
• Weight:Appro 120g/set

Use for 500 SIZE MODELS

Align 425K Carbon Fiber Blades Carbon Black utilizes unique compounding technology, features great performance for 3D and auto rotation flights.

Specification:
 

• Shape: Symmetrical wing
• Length:425x42x5.6mm
• Width:10mm
• Shaft Diameter:3mm
• Weight:Appro 120g/set

Use for Dominator 450L.

Must with 450 Metal Tail Rotor Holder(H45T002XX).

The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab reinforcement and rotation smoothly, but also avoid the scratches from the rotor holder rubbing against painting surface of blade causing expected vibration in flight.
 

• 450 Main Blade Clips x 8
• 450 Tail Blade Clips x 8

• Socket collar screw × 4(M2x12mm)
• Washer × 4(Φ2xΦ3.6x0.2mm)
  

Align 470MX Brushless Motor (1800KV/2818)

Based on 6s voltage, the 470MX (1800KV) motor is tailor made for the T-Rex 470L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature.
As a totem to the 850MX Dominator motor, The 470MX shares the same extraordinary pedigree.
Even for the none 3D pilots, 470MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
The 470MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
The 470MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
Suitable for T-REX 470L series,Must with 50A Brushless ESC(Governer Mode)(HES50X01).

Specification:

• Input voltage:6S
• Max continuous current:40A/60A(2sec)
• Max output power:Approx. 890w/1300W(2sec)
• KV value:1800KV
• Stator Dimension:2818
• Stator Arms:12
• Magnet Poles:8
• Dimension:spindle 3.5x36.4x51.7mm
• Weight:Approx. 120g

Accessories:

• Socket button head screw(M2.5X6mm) x 2
• Washer(F2.6XF5.8X0.6mm) x 2
• ALIGN standard 3mm gilt terminal x 3set

 

Align 500 Landing Skid

Skid pipe x 2
Landing skid x 2
Skid pipe end cap x 4
M3 Set screw x 4(M3x4mm)
Socket screw x 4(M2x10mm)
M2 nut x 4, Washer x 4
Landing skid nut x 4
Antena pipe x 1
 

This is a replacement Align Linkage Rod Set, and is intended for use with the Align 500 class helicopter equipped with the optional DFC Main Rotor Head Upgrade Kit

500E PRO Main Gear Case Set

One-way bearing HF1012
Main gear case x 1
Hex socket salf tapping screw x 4(T3x6mm)
One-way bearing shaft x 1
Washer x 1

This is a replacement Align Frame Hardware Set, and is intended for use with the Align T-Rex 500PRO and 500EFL PRO.

Includes:

(2) Socket button head screw (T2.6x14mm)

(6) Socket button head screw (T2.6x8mm)

(4) M2.5 screw (M2.5x12mm)

(2) Socket screw (M2.5x10mm)

(18) Socket screw (M2.5x6mm)

(4) Socket screw (M3x6mm)

(2) Washer (2.6x5.8x0.6mm)

This is an optional Align 500 PRO 36 Tooth M0.6 Torque Tube Front Drive Gear Set. This gear set utilizes redesigned highest spec and superior anti-wear material to increase the overall strength and durability for the torque tube drive gear. This effectively minimizes gear striping and crash damage

Specification:

• 500 Front drive gear assembly x 1
• 500 Short umbrella gear x 1
• 500 Long umbrella gear x 1