Clutch x 1 for t-rex 600 Nitro
One-way bearing HF1012 x 1(10x14x12mm)
INA Made in Germany

 

• Precision CNC machined module 1 main gear for minimal noise and high energy transfer efficiency.
• For T-REX 600 PRO/550E series

 

 

discontunued

Control shaft x 2(Φ5x81mm)
Socket screw x 2(M3x6mm)

6061-T6 Aluminum alloy material and CNC processed
Suitable for T-REX 600E PRO / 600EFL PRO

Specification:

Control shaft x 1(Φ4.8x61.7mm)
Control shaft collar x 1
Socket screw x 2(M3x6mm)
Washer x 2(Φ3xΦ5.5x0.3mm)

Control shaft(Aluminum) x 2(Φ5x81mm)
Socket screw x 2(M3x6mm)
Washer x 2(Φ3xΦ5.5x0.3mm)

●Use for T-REX 550E/600/600 Nitro。
●Damper rubber-gray 70° x 2(Φ8xΦ13x6.5mm)
●Spacer x 2(Φ8xΦ11.5x1.3mm)

Damper Rubber 75°

●Damper rubber x 2(Φ4xΦ6.5x4mm)
●Washer x 2(Φ5.5xΦ8x0.4mm)

For T-rex 500

Damper rubber-black 80° x 2(Φ5.9xΦ11.1x4mm)
Spacer x 2(Φ6.1xΦ10.5x1.5mm)

Drive Belt 397 for t-rex 450 older editions

This is a replacement Align Servo Gear Set, and is intended for use with
the Align DS410 Servo. This package includes all five gears, so you can
replace the entire gear train in the servo

This is a replacement Align Servo Gear Set, and is intended for use with the Align DS410 Servo. This package includes gears G1, G2 and G5

This is a replacement Align Servo Gear Set, and is intended for use with the Align DS420 servo

This is a replacement Align Servo Gear Set, and is intended for use with
the Align DS420 Servo. This package includes gears G1, G2 and G5

Use for ALIGN DS525 Servo.

Specification:

• DS525 Metal gear G1x1
• DS525 Metal gear G2x1
• DS525 Metal gear G3x1
• DS525 Metal gear G4x1
• DS525 Metal gear G5x1

 

Apply for ALIGN DS615/655 Servo

Specification:

 

• DS615/655 servo upper cover x 1
• DS615/655 servo lower cover x 1
• Screw x 4
• O-Ring x 4

 

 

Apply for ALIGN DS655 Servo

Specification:

• DS655 gear G1x1
• DS655 gear G2x1
• DS655 gear G3x1
• DS655 gear G4x1

Fit T-REX 600/600 Nitro

Specification:

●Engine fan cover(L) x 1(30.5x157.5mm)
●Engine fan cover(R) x 1(30.5x157.5mm)
●Hex mounting bolt x 2(Φ2.5x60.5mm)

Engine fan mount x 1(9.5x22x31mm)
Socket head spring screw x 2(M4x8mm)
Socket screw x 2(M3x12mm)
Socket button hrad screw x 4(M4x5mm)

Engine mount(L) x 1(39.3x16x8.5mm)
Engine mount(R) x 1(39.3x16x8.5mm)

Specification:

●Engine mount(L) x 1(49.8x16x8.5mm)
●Engine mount(R) x 1(49.8x16x8.5mm)

Specification:

●Engine gear x 1(Φ15.4xΦ7x40.9mm)
●Clutch nut x 1(Φ14x6mm)

Ergonomically designed for optimal hand grip to prevent slippage, light  weight, and easy to assemble/disassemble for transport ease. Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button. Suitable for up to 50cc gasoline engine or 300 class nitro engine.

Designed for user replaceable, using 3S1P 1900~2300mAh/16c lipo batteries. Fully charged battery is capable of 500 starts and beyond. Battery packs are charged with any T-REX 450 battery chargers. Starting adapter includes double one way bearing design.

• High efficiency motor providing high starting power, and low reacting force.
• LED battery voltage indicator and over-discharge protection circuitry.
• Battery under-voltage protection.
• Overheating protection
• Protection against stalling by flooded torque overloading engine.
• Suitable battery: Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
• No load rotation speed:2300rpm
• Battery under-voltage:10.8V
• Quiescent current:0 mA
• Motor overheat protection:80°C
• Decelerate gear ratio:5.3:1
• Size:80x60x390mm
• Weight:700g (w/o battery)
• Starter body x 1
• Airplane spinner cup x 1

Use for T-REX 450.

F3-6 Thrust Bearing x 2(Φ3xΦ6x2.8mm)
Washer x 2(Φ2xΦ4.8x0.6mm)
Washer x 2(Φ3xΦ4.8x0.3mm)

Thrust Bearing F3-8M x 2 (D3xD8x3.5mm)
Includes: 2 Thrust bearings.

Feathering shaft x 2(Φ6xΦ8x93.2mm)
Feathering shaft washer x 2(Φ4xΦ12x1mm)
Socket screw x 2(M4x8mm)

Feathering Shaft Set for T-Rex 450 Dominator

Feathering shaft sleeve set for Align T-Rex 550X/550E/600/600N/650X radio controlled helicopter.

Specifications:

● Damper rubber (hardness 85 degrees) x2

● Feathering shaft sleeve x1

• Feathering shaft x 2
• Washer x 2(2x6x0.6mm)
• Aluminum collar x 2(4x5.6x1mm)
• Socket screw x 2(M2x6mm)

For T-rex 500

Fiberglass horizontal stabilizer x 1
Fiberglass vertical stabilizer x 1

●3K fiberglass vertical stabilizer x 1
●3K fiberglass horizontal stabilizer x 1

●Flybar control rod x 2(Φ3.4x74.1mm)
●Socket screw x 4(M3x5mm)

●Flybar Paddlex2

●Size:60x32x3.84mm

●Weight:6.11g/pcs

Aftermarket paddle set FOR T-REX 500

Flybar paddle x 2
M3 set screw x 2(M3x4mm)
Sticker x 2/set
Weight:8.7g/pcs