This is the SkyRC e3 LiPo Balance Charger that provides you with one of the easiest and cheapest ways to charger your LiPo battery. The AC input is between 100-240V and the charge indication is via 3 LEDs on the charger; when the green light comes on, you're ready to go! This charger tales about 1.5 hours to charge a 11.1V 2200mAh battery.
Two DC power outputs, up to 30 amperes Output voltage adjustable 12-18V Large LCD indicates voltage and current amperes output Two USB ports, 5 volts, 1000mA total for MP3 player, mobile phone and digital cameras Smart cooling fan Over temperature protection Over loading protection Short circuit protection
Specification:
Voltage : 100-240V AC
Input AC Frequency : 50-60Hz
Output Voltage : 12-18V DC±0.5V
Output Current : 30A±1A
Current Overload Protection : ≤31A 500MS
Input Fuse : 10A Fuse
LCD Display : Voltage Precision ±0.3V Current Precision ±0.3A
SkyRC eFuel 50A (1200W) Power Supply with active PFC
Powerful 1200 Watt mains PSU, with user-variable output voltage and digital display of voltage and current. The input voltage range is 100...240 V, and the mains lead plugs into the unit, making it extremely versatile. The output voltage can be adjusted within the range 15....30 Volt DC, and the maximum current is 50 A. The unit‘s total continuous power is 1200 Watt. The electrical energy is transferred to consumer units such as battery chargers via four sockets, three of which are switchable. The mains PSU also features two USB outputs with a total capacity of 5 V / 2.1 A - ideal for charging devices such as tablets, smart phones, digital cameras, etc.
The eFUEL 17A compact DC power supply can convert standard household power 100-240V AC to 13.8V DC power and supply max 17 amperes of continuous power. It delivers smooth and reliable power and it not only enables RacingStar RS16 Charger but also RacingStar RSTW Tire Warmer to dock directly without the use of messy DC cables. It can also be used with other DC devices.
SKYRC RS16 is a high-performance, micro processor control
charge/discharge station with battery management suitable for all current battery types. There is an integral equalizer for six-cell Lithium- Polymer (LiPo), Lithium-Ferrum (LiFe) and Lithium-Ion (LiIon) batteries; the maximum charge current/power can reach 16A/180W.
SKYRC RS16 represents the newest technology of chargers with its handheld super-compact portable charging system. The joystick gives the user best operational experience and also makes the charger smart and unique.
There are two DC inputs, one is banana plug type and the other is XT60 type. The banana plug type in the bottom is designed for Direct Plug Docking System.
Specification:
DC Input Voltage: 11-18V
Controls: Joystick
Display Type: 2x16 LCD
Display Backlight: Blue
Case Material: Metal
Cooling System: Built-in fan x1pc
Case Size: 92x111.4x50mm
Weight: 405g
PC Communications: USB Port for PC Control & Firmware upgrade
External Port: Balance Socket-XH, Temperature Probe Socket, Battery Socket, DC Input, Micro USB Port for PC.
The Signal Loss Alarm & Lost Aircraft Finder is controlled by a tiny MCU. As simple device, it can be plugged into any servo/RX port, will detect the loss of TX signal and emit a loud 85dB alarm. Ideal for warning you if you have not turned off your RX power supply while in the pits, or if you are having trouble finding a model in the long grass, simply turn off your TX the alarm will sound and the red LED will start to blink! With its versatility and small size, the Signal Loss Alarm & Lost Aircraft Finder is a "must-have" accessory for fliers.
If you don't want the alarm to beep after one minute. You can disable one minute TX inactive warning by simply move the switch to mode 2.
Features:
Loud >85dB alarm gets your attention.
Built-in LED.
Can be used as a reminder to turn off the R/C receiver.
One minute TX inactive warning can be turn off (Mode 2).
Plugs into any standard 4.8 - 6.0 V DC powered receiver.
Average current draw is under 2.5mA when idle, 50mA during alarm.
SKYRC Ultimate 1000W features with high efficiency with synchronous rectification technology, it is accurate and stable and also has some new features and functions.
Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade.
What's more, users could also use it as Lithium Battery Meter and Lithium Battery Internal Resistance Meter.
There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.
