RJX Hobby

Aluminium CNC 2.5mm Finish Cap (10 Pcs) Silver Color

Aluminum Head Stopper Button 550-800 size

an upgrade for many helicopters

Carbon Landing Gear for Goblin 700 2mm

Set of 1 pcs

Aluminium Thumb screw set, Very light, 4 pcs pack.

M3, fits all size canopies

Carbon Landing gear RJX, align 600-700 size, sport edition.
Fits RJX helicopters, also can fit Align and other models 600-700 size.
Comes with metal adapters.

Carbon Paddles 30-50 size, colored in white , for good visibility

Specifications:

Fits flybar of 3mm ,85mm wide
Weight : +/- 16-18 gr

CNC XT60 Aluminum housing holder

The RJX FS0391THV provides the ultimate in performance for Midi tail servos. Cranking out a whopping 10.6kg and 0.03sec transit speed @ 8.4V, you will be hard pressed to find a better servo for your money. The massive torque and lightning fast speed makes this servo ideal for use in 3D helicopters as a cyclic or tail servo, scale airplanes and even large cars/trucks. The entire gear train is metal, making stripped gears virtually impossible. The case is machined from aluminum alloy providing the ultimate in durability and offering excellent heat dissipation.

The FS0391HV is a true high-voltage servo capable of operating at a constant 8.4V, yet still yields impressive numbers at as low as a 6V input. This makes it a very versatile servo which can be used in many different applications.

A full set of servo hardware is included, as well as an alloy servo arm ideal for use with helicopter cyclic servo applications.

Digital HV MIDI Tail Servo size made in Taiwan.
Special Narrow Band version for Cyclic or Tail servo used in Helicopters.
Full Metal Gears
Full Aluminum Alloy Case
with Standard Size fitting

Operation Voltage:6V-8.4V
Weight:50g(1.7oz)
Torque:8.4kg/cm(116.7oz/in)@6V
  9.6kg/cm(133.3oz/in)@7.4V
  10.6kg/cm(147.2oz/in)@8.4V

Speed :0.035(sec/60°)@6V
  0.032(sec/60°)@7.4V
  0.03(sec/60°)@8.4V

Dimension:15x36x35.5mm (W x L x H)
Frequence:760µs/333hz
Gear Type:Metal Gear
Motor Type:Coreless Motor

Package Info:

Main Blade spacers (4pcs) to adapt Blades to the Blade holder.

Made from Aluminium

Sizes: ( Inside x Outside X Thickness ) 4x22x1.0mm

Main Blade spacers (4pcs) to adapt Blades to the Blade holder.

Made from Special Plastic material, very hard.

Sizes: ( Inside x Outside X Thickness ) 5x20x0.5mm

Metal tail boom Fin/ Boom support Assembly 21mm diameter

fits all Helicopters with 21mm boom diameter

RJX 10CM SMA Pigtail W/UFL Connector (2pcs)

Shape: Symmetrical Wing

Length: 470 mm

Width: 43 mm

Root: 10mm

Bolt Hole: 3.0 mm

Weight: Approx 71.4g (1 pcs)

Material: Carbon Fiber

RJX 710mm CF Blades-FBL Version

Specifications/

• Length: 710mm (bolt hole to tip)
• Width: 64mm
• Root: 14mm
• Bolt Hole: 5mm
• Weight: ~185 grams

RJX 8.5 x 20mm Model 8520 1-2S Brush Motor For 80mm-130mm FPV Quads

• Coreless Motor NO.: 8520
• Motor Diameter: 8.5mm ; Motor Length: 20mm
• Shaft Diameter: 1.0mm
• Cable Length: about 110mm

Included: 4 x 8520 Coreless Motor (CW CCW)

Usage: For 90mm-110mm wheelbase Indoor Micro FPV Racing Quadcopter

RJX Alum Servo Arm for Mini and Standard Servo X3PCS Red

• Specially designed to work with mini and standard size servos 25T
• Compatible with Futaba, Savox, Align etc standard size servos
• Ball mount holes distance from center: 14mm 18mm 21mm 24mm

RJX Ball End Driver (for Manual and electric). CNC aluminum made, Anodized( red or blue color). Comes with Hex end to fit Electric tool.

Set of 1 driver

RJX Bluetooth Module for V-bar

This Module makes your setup of the V-bar very easy and secure.

No need of cables and having the Helicopter near to you.

Just plug the Module into the V-bar and make your setup or any other operation.

Support Voltage: 6 - 8.4V

DO NOT FLY WITH THE MODULE PLUGGED IN

RJX C330 Camera Mount

RJX C330 CF Lower Frame

RJX C330 CF Upper Frame

RJX C330 M3 Washers (2pcs)

RJX C330 M3x8 Counter Sunk Hex Screws (10pcs)

The CAOS 210 Quadcopter Combo including Frame, Electronics, Flight controller, Lipo and optional FPV set.

Choose you configuration, fpv KIT also availiable as extra

Features

• The center of gravity and the propeller of the pneumatic center coincide
• Using high quality Quick assembling and dismantling nylon fence （Prevent water from splashing and protective equipment）

Specifications:

Weight:325g without battery

Power Requirement: 4S 1300-1500 mAH

ESC:4S 20A

Motor size: 2204-2406

Props:5" RJX Props

Camera：700-800TVL

Flight Time: Highly dependent upon battery, and flying style

Included in the box:

• 1x RJX Caos 210 FPV  Frame
• 4x motors 2204 such cobra, or Avizar.
• 4x ESC 12a Blheli or SimonK
• 1x CC3D flight controller
• 2x RJX battery straps
• 1x mini HUB
• 4x Damping
• 1x XT60
• 4x 5" RJX Prop

Add FPV kit, including:

• 700 TVL sony CCD camera
• Video TX
• Spyro-cloverleaf antenna for TX

The CAOS 210 Quadcopter airframe is a small yet fully functional FPV quad deserving the QAV label. The Caos 210 is a symmetric 215mm size airframe that accommodates 5" props. The 215mm is measured motor shaft to motor shaft diagonally.

This is a frame kit version, no electronics included.

Features

• The center of gravity and the propeller of the pneumatic center coincide
• Using high quality Quick assembling and dismantling nylon fence （Prevent water from splashing and protective equipment）

Specifications:

Weight:325g without battery

Power Requirement: 4S 1300-1500 mAH

ESC:4S 20A

Motor size: 2204-2406

Props:5" RJX Props

Camera：700-800TVL

Flight Time: Highly dependent upon battery, and flying style

Included in the box:

• 1x RJX Caos 210 FPV  Frame
• 2x RJX battery straps
• 1x mini HUB
• 4x Damping
• 1x XT60
• 4x 5" RJX Prop

RJX Diversity Receiver Module ( Special for Fatshark Goggles SMA- Female)

Feature:

• RX5808 Pro Diversity Open Source 5.8G 40CH Integrated Receiver with OLED
• Suitable for Fatshark series Goggles
• Antenna Connector: SMA  Frequency: 5.8G  Channel: 40CH
• With OLED display ，Auto scan，Channel switch in 25ms
• Plug and Play
• 2S（7.4V） 600mA

Package Included:
1 x Diversity Receiver

Frequency:
Jumper:1-1 IRC/FS : 5740,5760,5780,5800,5820,5840,5860,5880
Jumper:0-0 Race   : 5658,5695,5732,5769,5806,5843,5880,5917
Jumper:0-1 Band A : 5865,5845,5825,5805,5785,5765,5745,5725
Jumper:1-0 Band E : 5705,5685,5665,5645,5885,5905,5925,5945

•  

Muffler Gasket set, with springs, for Gasser muffler

New RJX Rotor Blades 500mm

Specifications :

• Length: 500mm (bolt hole to tip)
• Width: 45mm
• Root: 10mm
• Bolt Hole: 4mm

Weight : About 88 grams
 

RJX XT50 Canopy Black BLUE , RJX 50-600 SIZE

Painted Canopy (Black) - RJX 90 ALL

Painted Canopy (Yellow) - RJX 90 ALL

Rubber Canopy Grommets 10mm x 5mm, m3 mounting Hole- THIS model fits All helis

Diameter is 10mm

Total thickness of grommet 5mm

Hole M3

set of 4

Rubber grommet 8mm inner diameter for Fuel line

OD is 15mm

ID is 8mm ( perfect for any fuel line or wires installation in the frame)

10 pcs in a bag

Self Clamping Main Shaft CNC Collar fit shafts of 10mm,

this collar is self clamping, with M3 screw to insure perfect fit. Upgrade for most helicopters with 10MM shaft

Set of 2pcs with hardware

Stainless steel ball Head 4.7mm diameter 4mm tread length 8mm Joint Ball (4pcs)

Specifications:

• Ball is 4.7mm+-
• Length of the ball head( without the ball ) is 8mm
• Length of tread 4mm
• Tread M3
• Material- Hardened steel

Gearset RJX servo FS0521 ,TITANIUM gears, with bearing