Radial Bearings

Radial ball bearing 6x17x6

Radial ball bearing 6x19x6

Radial ball bearing 8x12x2.5

Radial ball bearing 8x16x4

Radial ball bearing 8x16x5

Japanese made, ABEC5. set of 1 pcs

Radial ball bearing R2-5ZZ
Specially used in motors with 3.17mm shaft
Size: 0.125X.3125X.1406 inch
 

Radial ball bearing R2-ZZ
Specially used in motors with 3.17mm shaft
Size: 0.125x0.3750x0.1562 inch
 

ABEC-5 Radial Japanese Bearing 30x37x4. 6706ZZ

Including: 1 bearing

Revell Rayvore & Dromida Ominus Bearing set replacement

This is a replacement Ball Bearing Set for the Rayvore & Dromida Ominus Quadcopter. Includes eight ball bearings for the four motor shafts.

SAB Ball Bearing 10 x 22 x 6 (Mini Comet) (2 pcs)

Includes:

• Ball bearing 10 x 22 x 6 mm ( 6901zz ) - 2pcs

SAB Goblin Radial bearing 12 x 18 x 4mm (4pcs)

Includes:

• Bearing  Ø12 X Ø18 X 4 x 4pcs

Use for:

• Goblin Black Nitro

Steel Metal Shielded Thin-Section Radial ball bearing 25x37x7

ABEC 5 bearings are equipped with grade 5 bullets at military level and are therefore excellent for use in precision applications.

These bearings have been treated with a high quality Teflon lubricant (Rheolube 374A) to ensure that they run even smoother.

Most ABEC 5 bearings feature SRS seals, which can be disassembled for quick and easy maintenance. The low rolling resistance and good sealing against moisture and dirt are guaranteed.

Thrust Bearing 5x10x4 mm for Goblin 630/700 Competition (2pcs)

Trust Ball bearing 4x8x2 2pcs

Elevator arm bearings - 2 pcs

HMV1280 d8 x D12 x W3.5
Used in Raptor 30/50 V1 & V2 version, Raptor 60 V2 version, Raptor E700 & Raptor 90 Std

Feathering bearings - 2 pcs PV0175 HMV1680

Size: d8 x D16 x W5

Main Shaft Bearing 12X24X6 (2 pcs)

Scorpion HK-40 Motor Bearing Kit.

In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
The Scorpion HK-40mm Motor Bearing Kit includes a pair of original equipment replacement bearings to fit the Scorpion HK-40 & HKIII-40 Series motors.(Except HK-4015)

Please note, the bearings are an exact fit into the motor housings, so they do fit snugly. When removing the old bearings, you may need to gently tap them out. However, when installing the new bearings, do not tap them in with anything, as this can dent the ball races and ruin the bearings.
When installing ball bearings they need to be pressed in by the outer part of the race. Never apply pressure to the inner race, as this can damage the bearing and lead to premature failure.

Tail drive shaft bevel gear bearings (2 pcs)

Size: d12xD18xW4mm

Used in Raptor 60 V2 version, E700 & Raptor 90 Std

Tail pitch control lever bearings - 2 pcs

Size: d4 x D7 x W2.5

Upgrade Stainless Steel  Front bearing for Nitro Engine OS 40-50-61-91-105,it fits Also other models, if you not sure, please contact us.

Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

Those bearings are a direct upgrade to stock bearing delivered with OS engines. Bearing comes with 2 Rubber Shields/sealings. 1 should be removed in order to allow Oil to pass throw, this side is the Inner side, Outer side stays with Sealing.

Upgrade SS Front bearing for Nitro Engine yamada YS 60-120,it fits Also other models, if you not sure, please contact us.

Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

Those bearings are a direct upgrade to stock bearing delivered with YS engines. Bearing comes with 2 Rubber Shields/sealings. 1 should be removed in order to allow Oil to pass throw, this side is the Inner side, Outer side stays with Sealing.

Upgrade SS Rear bearing for Nitro Engine OS 40-55, YS50-56,it fits Also other models, if you not sure, please contact us.

Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

Those bearings are a direct upgrade to stock bearing delivered with OS/ys engines. Bearing comes with 2 Rubber Shields/sealings. BOTH should be removed in order to allow Oil to pass throw.

Upgrade SS Rear bearing for Nitro Engine OS61-105, YS80-120 ,it fits Also other models, if you not sure, please contact us.

Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

Those bearings are a direct upgrade to stock bearing delivered with OS/ys engines. Bearing comes with 2 Rubber Shields/sealings. BOTH should be removed in order to allow Oil to pass throw.

Upgrade SS Rear bearing for Nitro Engine Webra 40-61 ,it fits Also other models, if you not sure, please contact us.

Stainless Steel bearings are made from heat hardened 440C stainless bearing stock.  This steel is hardened to well within the requirements for standard steel bearings.  Since it is a heat hardened stainless, it is magnetic!  It is actually referred to a corrosion resistant steel so tiny rust spots can appear on it but usually not enough to affect performance.  If you had rust issues with standard bearings, these will all but eliminate that problem

Those bearings are a direct upgrade to stock bearing delivered with Webra engines. Bearing comes with 2 Rubber Shields/sealings. BOTH should be removed in order to allow Oil to pass throw.