Mikado Logo 400, SE

Landing bow for LOGO 400/SE

Landing struts LOGO 400/480 white

Dumper rubber set medium hard

Mainframe left LOGO 10/400/SE for midi servo size

Mainframe right/left LOGO 400/SE for Servo S9650/ sAVOX/ 9257

Metal motorplate LOGO 400

Metal yoke for swashplate driver 10mm

Ball bearing 3x7x3 (2pcs)

Mikado Ball Links 2,5 mm (20 pieces in set)

Mikado Control sleeve for tail rotor shaft #02455

Mikado Helicopter Clamps for carbon tailrotor case 20mm.

Set of 2.

Use for LOGO 500 SE (2009-2012) / Logo 500/ Logo 400SE / Logo 400

Lever for swashplate driver

Ball links 2.5 mm (10 pieces)

For all Logo

Mikado Logo Dampner set extra hard

Main gear Logo 400 200 teeth

Safety ring 10mm

Y-link LOGO 10/16/20/400/SE/600/SE

Mikado Tail Rotor Blade Holders, Set of 2

Mikado Velcro straps 20x280mm (4 pcs)

Pinion 15 teeth D5mm, module 0,5 LOGO 10

Pinion 16 teeth dia.5mm, module 0,5 . LOGO 10/400

Pinion 19 teeth dia.5mm, module 0,5 

For LOGo 10, 400

Pinion 20 teeth D5mm, module 0,5

Pinion 21 teeth Ø5mm, module 0,5

Pinion 22 teeth Ø5mm, module 0,5 LOGO 10

Pivot bolt M3x10 swashplate (long), 2pcs

Pivot bolt swashplate M3x8 (short)

Raised head hex screw M4x12

Savox SC-1251MG Low Profile Digital "High Speed" Metal Gear Servo

The Savox SC-1251MG  is a Low Profile Digital Metal Gear Servo.
He combines leading edge technology, with super high 12 bit (4096) resolution and Metal Gears. With it's low profile case, the SC-1251MG is ideal for most 1/10 onroad, and 1/10 buggy applications.

Features:

• Light weight
• Coreless Motor provides high speed, incredible efficiency, and low power consumption
• The Aluminum Case design not only looks good but also allows for lower operating temperatures.
• Totally Green – from materials to production, these servos are environmentally friendly.
• Ideal as a steering servo for 1/10 surface applications, and as a aileron servo in gliders and airplanes that have thin wing profiles.

*NOTE: Certain combinations of receiver and ESC have been found to cause "Brown Out" issues when combined with Savox servos. An external BEC, or BEC stabilizing receiver capacitor may be needed for efficient, glitch free operation in low voltage electric applications.

Specifications:

• Speed @ 6.0V: .09
• Torque @ 6.0V: 125 oz-in / 9.0 kg-cm
• Weight: 44.5g
• Bearing: Dual
• Type: Low Profile
• Gear: Metal
• Output Shaft: 25T Spline (Futaba)
• Case: Aluminum Heatsink
• Case Size (LxWxH): 40.8x20.2x25.4mm

This is the Savox SH-1250MG Digital Metal Gear High Torque Servo. The Savox SH-1250MG is a metal gear, mini sized cyclic servo that is recommended for 500 class helicopter Cyclic applications.

Features:

• Coreless Motor provides high speed, incredible efficiency, and low power consumption.
• 10 Bit signal resolution for smooth movement.
• The aluminum case design not only looks good but lowers operating temperatures.
• Precision metal gears form a strong and solid framework.
• Supports digital and analog control signals.
• Ideal cyclic servo for 500 class helicopters and other aircraft that can benefit from a mini size metal gear servo.

Specifications:

• Torque @ 6.0V: 63 oz-in / 4.6kg-cm
• Speed @ 6.0V: 0.11/60°
• Voltage Range: 4.8-6.0V
• Weight: 29g
• Type: Micro
• Gear: Metal
• Case: Aluminum Heatsink
• Output Shaft: 25T Spline
• Case Size (LxWxH): 35x15x29.2mm

Savox SH-1290MG digital servo 5kg@0.048sec

Ultra fast servo, to be used mostly as a Gyro servo

Extremely FAST with 5 kg-cm torque at its size AND 0.048SEC
Extraordinarily light in weight, 20% lighter than its kind in the field
The Coreless motor inside has brought the output performance to the top level - smoother, faster and more efficient
The metallic case design not only exudes an exquisite style but helps the operating to stay cool and smooth.
Super strong and precise-made Titanium metal gear form as the solid framework of our servo. Our design will make “Crumbled Gear” history.
Ideal for Gyro servo for 500-700 size helis and larger

Specifications:

• Size (mm) L x B x H: 40.3*20.2*36.0
• Weight (g): 56.4
• Speed: 0.048 sec/60° @6.0V
• Torque kg-cm: 5.0 @6.0V
• Ball Bearing: 2
• Gears- Metal

Shaft for Yoke (V-Bar head)