MAH blades

The main blades are made from the highest quality CF and are used by pro flyers around the world. The MAH blades are balanced & shipped with proper CG for the absolute best performance.
MAH blades are choosen by leading pilots worldwide

Best 3D main blades for helicopters.

Specifications:

• Length: 463mm
• Wide:41mm
• Weight 60 gr
•  Root: 9mm
•  Material: Carbon with Reinforced Core

Those blades paint scheme can vary, if you want to be sure whats available, please check with us in advance

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Industrial UAV/UAS  helicopters.

Semi symmetrical profile Reflex Carbon Fiber main blade for helis.

• Length: 1120 mm
• Rotor disc is 2500mm +-
• Chord: 76mm
• Thickness: 11mm
• Weight: +-570gr
• Bolt: 6mm
• Root: 22mm
• Shark Skin finish: anthracite matt
• Profile: reflex Left hand rotation

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Industrial UAV/UAS  helicopters.

Right hand means Clock wise rotation when looking from top

Semi symmetrical profile Reflex Carbon Fiber main blade for helis.

• Length: 1120 mm
• Rotor disc is 2500mm +-
• Chord: 76mm
• Thickness: 11mm
• Weight: +-570gr
• Bolt: 6mm
• Root: 22mm
• Shark Skin finish: anthracite matt
• Profile: reflex Right hand rotation

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.
Length: 850mm

• Chord: 85 mm tapering to 73mm at blade tip.
• Weight: 250-260 grams
• Bolt: 4/5mm
• Root: 14mm
• Weight : +-295grm
• Set of 2 blades.

MAH Large scale Helicopter rotor Blades 1050MM GLOSSY finish Right Hand CW rotation. Those are perfect blades for Scale helicopters, and certain UAS platforms

Semi symmetrical Carbon Fiber main blade for helis.

• Length: 1050 mm
• Rotor disc is 2360mm +-
• Chord: 76mm
• Weight: +-570gr
• Bolt: 6mm
• Root: 22mm
• Finish: anthracite matt
• Profile: reflex RIGHT hand rotation CW

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Scale helicopters, and certain UAS platforms

Semi symmetrical Carbon Fiber main blade for helis.

• Length: 1120 mm
• Rotor disc is 2500mm +-
• Chord: 76mm
• Weight: +-570gr
• Bolt: 6mm
• Root: 22mm
• Shark Skin finish: anthracite matt
• Profile: reflex Left hand rotation

These are the original MAH SHARK SKIN series main rotor blade. Those are perfect blades for Scale helicopters, and certain UAS platforms

Semi symmetrical Carbon Fiber main blade for helis.

• Length: 1120 mm
• Rotor disc is 2500mm +-
• Chord: 76mm
• Weight: +-570gr
• Bolt: 6mm
• Root: 22mm
• Shark Skin finish: anthracite matt
• Profile: reflex right hand rotation

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

• Length: 810mm
• Chord: 81mm tapering to 68mm at blade tip.
• Weight: 225-245 grams
• Bolt: 4/5mm
• Root: 14mm
• Weight : +-270grm
• Set of 2 blades

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

• Length: 810mm
• Chord: 81mm tapering to 68mm at blade tip.
• Weight: 225-245 grams
• Bolt: 4/5mm
• Root: 14mm
• Weight : +-270grm
• Set of 3 blades for multiblade head

Specially produced for for Multicopter UAV applications . Made in Europe!
The 13X6.5 Carbon Fiber Precision Pair is produced with a unique process, giving ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform. 

The results are- Quick response, less overload for the motor, Longer flying times, Higher payload.

Included 2 props, 1xCW and 1xCCW

Perfectly pre balanced and matched

Specially produced for for Multicopter UAV applications . Made in Europe!
The 14X5 Carbon Fiber Precision Pair is produced with a unique process, giving ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform. 

The results are- Quick response, less overload for the motor, Longer flying times, Higher payload.

Included 2 props, 1xCW and 1xCCW

Perfectly pre balanced and matched

Specially produced for for Multicopter UAV applications . Made in Europe!
The 15x4 Carbon Fiber Precision Pair is produced with a unique process, giving ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform. 

The results are- Quick response, less overload for the motor, Longer flying times, Higher payload.

Included 2 props, 1xCW and 1xCCW

Perfectly pre balanced and matched

Specially produced for for Multicopter UAV applications . Made in Europe!
The 15x5 Carbon Fiber Precision Pair is produced with a unique process, giving ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform. 

The results are- Quick response, less overload for the motor, Longer flying times, Higher payload.

Included 2 props, 1xCW and 1xCCW

Perfectly pre balanced and matched

New Profile, New color scheme, especially for HARD 3D!!

MAH blades incorporate a revolutionary steel safety wire retention system. This assures a high level of safety in the event of a “structurally compromising impact,” better know as a crash.
Those blades are combination of design taken from many blades, and combined all in one..

Specifications:

• Length: 425mm
• Chord: 43 mm
• Root: 9 mm
• Material: Carbon with Reinforced core
  

Blades are matched by weight and center of gravity. Dynamically and static balanced

New Profile, New color scheme, especially for HARD 3D!!

MAH blades incorporate a revolutionary steel safety wire retention system. This assures a high level of safety in the event of a “structurally compromising impact,” better know as a crash.
Those blades are combination of design taken from many blades, and combined all in one..

Specifications:

• Length: 516 mm
• Chord: 52 mm
• Root: 12 mm
• Material: Carbon with reinforced Core

Blades are matched by weight and center of gravity. Dynamically and static balanced

These are one of a kind Tapered super lift blades. The quality you expect from MAH is now available in a two color ( White and Carbon Black ) 325mm long blades for all 450 size helis, 3d and flybarless flying.
The white and black rotor disk is also easier to see and can help in distant visual orientation.
These are awesome blades which look good, fly great and super light !!! Our customers reported longer flying times with those blades- due the Efficiency

The main blades are made from the highest quality CF and are used by pro flyers around the world. The MAH blades are balanced & shipped with proper CG for the absolute best performance.
MAH blades are choosen by leading pilots worldwide

Full symmetrical cfk mainblade for helis. Carbon fibre with white Tip&Root.

Carbon fiber blades to fit Flybarless helicopters
Length 385 , Wide 45 mm, root 6 mm, weight +/-50 gr

The main blades are made from the highest quality CF and are used by pro flyers around the world. The MAH blades are balanced & shipped with proper CG for the absolute best performance.
MAH blades are choosen by leading pilots worldwide

Full symmetrical cfk mainblade for helis. Carbon fibre with white Tip&Root.

Carbon fiber blades to fit Flybarless Helicopters.
Length 400 , Wide 45 mm, root 6 mm, weight +/-50 gr

The main blades are made from the highest quality CF and are used by pro flyers around the world. The MAH blades are balanced & shipped with proper CG for the absolute best performance.
MAH blades are choosen by leading pilots worldwide

Full symmetrical cfk mainblade for helis. Carbon fibre with white Tip&Root.

Carbon fiber blades to fit Flybarless Helicopters.
Length 550MM

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

• Length 950mm
• Root :14mm
• Width: 90(root)-75(tip)
• Weight : +-360grm

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

MAH UAV Large scale Helicopter Tri-pal rotor Blades 950mm-set of 3

• Length 950mm
• Root :14mm
• Width: 90(root)-75(tip)
• Weight : +-360grm

XBLADES are a result of many years of experience and consistent further development of the INSANE rotor blades. Fit 550-700 size helis

The XBLADES offer the 3D pilot outstanding speed flight characteristics with extreme maneuverability - and all of this with very effective performance implementation.

XBLADES - the all-round rotor blade with a focus on 3D - suitable for paddles and FBL: ONE4ALL


Technical data
Profile: Symmetrical
Length: 92mm
Width: 27.6mm / 24.8mm
Blade thickness: 5mm
Screw hole: 3mm
Weight: +-9g

Included: XBlades carbon rotor blade x 2