Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

+32-486-808080 Contact Us

ERC Latest



01-04-2017: New Whoop frames arrived, upgrade your inductix, also WBX frames from Ragg-e in stock now!


29-07-2016: Check out the new MSH Protos 380, it just came in! We have its spare-parts defined HERE.


20-07-2016: Want to race crash proof with your Graupner Racing Gate? You can now, because our graupner tape is back in stock!


16-07-2016: Want to cruise through the city in style? Check out our new added electric scooters!


15-07-2016: Are you ready for the FPV racing season? Purchase our custom designed Flag, Archer Gate and Ring Gate and make an awesome circuit!


13-07-2016: Problems with fitting a camera on your FPV racer? Too big? Check out the new Runcam Swift now!


  • New Arrivals

  • On sale

More...
  • APC Multi-Rotor propeller 13x4.5 MRP

    APC Multi-Rotor propeller 13x4.5 MRP

    APC Multi-Rotor propeller 13x4.5 MRP

    •   APC MR series prop (pusher), specially designed for Multi-rotors.
    •   High performance nylon propeller especially engineered for electric multirotors.
    •   MR series is lighter than the Thin Electrics, with a higher RPM capability than Slow Flyers

    Technical specifications:

      Diameter: 13"
      Pitch: 4.5"
      Bore: 6mm

    Included: 1 Prop

    SKU: APC13045MRP
    €6.90
    inc. VAT

     IN STOCK
  • APC Multi-Rotor propeller 13x4.5 MR

    APC Multi-Rotor propeller 13x4.5 MR

    APC Multi-Rotor propeller 13x4.5 MR

    •   APC MR series prop , specially designed for Multi-rotors.
    •   High performance nylon propeller especially engineered for electric multirotors.
    •   MR series is lighter than the Thin Electrics, with a higher RPM capability than Slow Flyers

    Technical specifications:

    •   Diameter: 13"
    •   Pitch: 4.5"
    •   Bore: 6mm

    Included: 1 Prop

    SKU: APC13045MR
    €6.90
    inc. VAT

     IN STOCK
  • Mikado GLOGO 690/Synergy N7 - CNC Turbo Fan

    Mikado GLOGO 690/Synergy N7 - CNC Turbo Fan

    An industry first – Lynx Heli Innovations high performance NITRO fan replacement.

    Increases air flow for better engine cooling with maximum efficiency to reduce engine load compared to a standard fan. High tolerance dimensions for solid and concentric installation to eliminate all vibrations. Has a turbo effect and special rudder blade to optimize air flow.

    Designed to replace the Synergy 700 Nitro Series and Mikado G LOGO 690 standard fan and immediately improve the performance of your Heli.

    Material: Aluminum 7075-T6 Alloy

    SKU: LX3008
    €28.00
    inc. VAT

     IN STOCK
  • OXY3 Tareq Edition FLYBARLESS helicopter kit, 2018 version

    OXY3 Tareq Edition FLYBARLESS helicopter kit, 2018 version

    OXY 3 - Tareq Alsaadi Edition 2018 – The evolution of a legend!

    Designed by Tareq Alsaadi in cooperation with Oxy Heli and Lynx, for all of us that love Tareq and Oxy Heli!.
    From the Oxy Heli beginning. Tareq was and is, fully involved on testing, develop and suggestions. Thanks to his superior’s pilot skills and heli experience, his suggestions drives the Oxy Heli project evolutions.
    Since Lynx Heli Innovations was born in 2005, Tareq along with Luca Invernizzi and all the Lynx Team, started to work together in order to release special products and optional parts.
    In 2015 the First OXY 3 Tareq Edition went released and was an amazing success… Now after tree years, Tareq Alsaadi in cooperation with Oxy Heli and Lynx proudly introduces the new OXY 3 2018 Tareq Alsaadi Edition.
    Let me say without hesitations:  Oxy 3 Tareq Edition 2018, the evolution of a legend!

    Many of you confessed by the interest for the improvement of the new Oxy 3 TE, but more ask: “How it was possible to improve a product already perfect?”

    Honestly specking, Tareq himself also was amazed when testing the newly OXY 3 TE.

    Tareq and Luca worked on advanced heli specification, and the result after over 10 months of hard work is now easy touchable… not just for beauty but especially in flight.


    Major changes applied compared older OXY3 Series.

     
    1-     Simplicity to Efficiency… Because Tareq also like fix his OXY, like all our OXY-generation customers, new features were added to make all manual operations easier.
    -  Main Gear Jesus Bolt: Those who have an OXY 3 already know what we are talking about.. YES, we did! New Design, were no pliers are necessary on the lock / unlock operations. Already used and approved on our OXY 4 a special OEM Nut called H2-M2 helps dramatically assembly and service operations.

    - DFC Linkage Rods, some of you as us, probably experienced a nasty feeling discovering after crash, the impossibility to reuse Main Grip, with the DFC fastening screw snapping off in it!
    In the new OXY editions, we introduce a “clever” and innovative system with superior fastening and kinetic features. So in case of hard crash, assures the integrity of the Main Grip with the possibility of easy and fast service of every single DFC / Head and parts.

    One more time, Tareq Alsaadi’s support drives our future!

    Simple detail made big improvements!
     
    2-     Improved CoG (360 degree Center Of Gravity):  Extra battery volume, better visibility and “Muscle” Kit Sexy Look.  Improve on perfection is not easy, but Tareq’s request, push us for the excellence even farther!
    - New frame design, combined with a new profile canopy is the answer.
    - New Tareq's designed paint schema with his loved “Hello Dubai" logo, and matched painted boom adds detailed and esthetics touch. "Hello Dubai" logo for Tareq Alsaadi like for his creator "Highness Sheikh Mohammed Bin Rashid Al Maktoum" means: Winning, Victory, Love, and his just an honor for Luca and all OXY TEAM to have it on the OXY 3 TE.

    - Weight Reduction, thanks to the new components: Landing gear, frame and canopy over 10g overall weight saving compare the previous edition

     
    3-     Tail System Efficiency:  For Oxy Heli the Tail was and will be the most important Heli feature to handle.  
    - The New OXY 3 Tareq Edition feature new tail components and tail ratio. With all new components, together with the improved efficiency we improved the vibe suppression, the holding and the wear resistance.


     
    OXY 3 - Tareq Alsaadi Edition 2018 – Specifications List:

    For the best pilot, just simply the best features!


    FRAME AND CANOPY:

    -  Main Blade options: from 250 up to 287mm

    - New canopy design, reduced volume and aggressive look. 100% 3K Carbon Fiber Epoxy construction: strong and lightweight construction. -  Tareq's designed paint schema with his loved “Hello Dubai" logo.
    - New Frame Design improves CG, battery volume capability and stiffening.
    - Triple Main Shaft Bearing Block Support System.
    - Ultra-Light and flexible landing gear - Carbon Plastic copolymer based material
    - CNC POM Copolymer main gear with innovative Jesus H2-M2 Nut System.
    - Motor Mount / Upper Frame CNC Sandwich Stiffener System Lock.
    - CNC Aluminum Tail Boom Clamp CNC Sandwich Stiffener System Lock.
    - Carbon / Copolymer Anti-rotation guide.
    - All aluminum parts with special surface finish and Racing Anodize color (orange / black).
     
    HEAD SYSTEM:
    - DFC Head System with CNC Aluminum Arm and innovative fastening lock system.
    - All aluminum parts with special surface finish and Racing Anodize color (Orange / Black).
    - Optional FBL System Head available, sold as optional.
     
    TAIL SYSTEM:
    - Polymeric OXY HELI Profile Boom System.
    - New improved Tail Grip and Tail ratio System.
    - CNC Aluminum Tail Servo Support.
    - Reinforced Tail Case with Carbon Fiber and Aluminum CNC parts.
    - CNC Aluminum tail Bell Crank, with innovative anti-rotation Slider Ring system.
    - Plastic Black 50mm Tail blades.
    - All aluminum parts with special surface finish and Racing Anodize color (Orange / Black).
     
    EXTRA PART AND ACCESSORY COMES WITH THE KIT:
    - Swashplate leveler tool.
    - 11T and 14T pinions.
    - Vertical fins colored stickers
     

    SKU: OXY3-TNB
    €319.00
    inc. VAT

     IN STOCK
  • ZEAL Energy Carbon Fiber Main Blades 600mm (Neon Orange)

    ZEAL Energy Carbon Fiber Main Blades 600mm (Neon Orange)

    ZEAL Energy Carbon Fiber Main Blades 600mm (Neon Orange)

    Set of Main Rotor Blades

    • (4) pcs x 1mm washers
    • Specifications:
    • Material: Carbon Fiber
    • Length:600mm
    • Chord width: 55mm
    • Root thickness: 12mm
    • Hole Diameter (Bolt): 4mm
    • Weight: approx 132g (single blade)
    SKU: ZHM-NRG600G
    €69.00
    inc. VAT

     LOW STOCK
  • Q8 ANTISPARK Connector SET 8mm for High current applications, 200 AMPS, Male+Female

    Q8 ANTISPARK Connector SET 8mm for High current applications, 200 AMPS, Male+Female

    This is a set of Special High current connectors with Antispark.

    those are 8mm connector with special Antispark device installed so even with huge power applications  you will avoid Sparks.

    Connectors are Gold plated to avoid corrosion and allow perfect conduct.

    Connector have Housing to protect the soldering part, and it wil be invisible.

    Possible to buy as 1 set or set of 8 (cost saving)

    Color is black

    1 set including Male, Female, 2 housings

    Specification:

    • Connector Housing: nylon with fiber.
    • 8mm Anti-spark with 5.1 ohm
    • Banana material: gold plating brass
    • set Weight: 36g
    • Under highest temperature: 200 degree
    • Biggest wire: 6AWG
    • Current: 120A~200A
    SKU: Q8CON
    €7.90
    inc. VAT

     IN STOCK
  • OXY3 FBL System

    OXY3 FBL System

    OXY3 FBL System

    NOTE: 2018 Edition, compatible with any OXY3

    SKU: OSP-1130
    €19.50
    inc. VAT

     IN STOCK
  • ZEAL Energy Carbon Fiber Main Blades 640mm (Neon Orange) B- SURFACE

    ZEAL Energy Carbon Fiber Main Blades 640mm (Neon Orange) B- SURFACE

    ZEAL Energy Carbon Fiber Main Blades 640mm (Neon Orange) B- SURFACE

    Zeal B-surface blades are the exact same blades as the standard blades but they have a cosmetic defect on the surface of the blade. This does not affect the way they work and often these defects are virtually un-noticable. Please note there are no returns on B surface blades

    Specifications:

        Material: Carbon Fiber
        Length: 640mm
        Chord width: 55mm
        Root thickness: 12mm
        Hole Diameter (Bolt): 4-5mm
        Weight: approx 159.7g (single blade)

    SKU: ZHM-NRG640G
    €55.00
    inc. VAT

     LOW STOCK
  • YGE 135 SLIM BRUSHLESS Controller 2-6 with BEC & Telemetrie

    YGE 135 SLIM BRUSHLESS Controller 2-6 with BEC & Telemetrie

    YGE 135 SLIM BRUSHLESS Controller 2-6 with BEC & Telemetrie

    The -T- in the name of the YGE-135LVT SLIM stands for telemetry.


    Currently the following protocols are supported:

    Graupner HoTT V4
    Jeti ExBUS
    Multiplex Sensor BUS V2
    own YGE protocol for further telemetry connections via e.g. S32 (new jlog of R² prototyping).
    Further protocols are in preparation.


    Currently the following protocols are supported:

    • Graupner HoTT V4
    • Jeti ExBUS
    • Multiplex Sensor BUS V2
    • own YGE protocol for further telemetry connections via e.g. S32 (new jlog of R² prototyping).
    • Further protocols are in preparation.

    With the optionally available USB adapter, the 135LVT SLIM can be adjusted in many ways and new updates can be uploaded.
    During operation, the PWM frequency is always automatically adjusted to the needs of the engine and is therefore always optimal.
    Due to the new sine-start of the 135LVT SLIM, the startup behavior is now super-soft.

    The heavy duty (8 / 18A) and adjustable BEC (5.5 to 8.4V) complement the outstanding features of the YGE-135LVT SLIM.

    Description:

    • The specified current is the maximum continuous full gas flow with good cooling.
    • 2 to 6s LiPo, undervoltage reset or shutdown.
    • BEC - undervoltage detection can be switched off.
    • current limit
    • Speed ​​control (governor mode).
    • Soft start.
    • Active freewheel, thus unlimited part-solid.
    • Automatic timing, or adjustable in 6 levels.
    • EMK brake adjustable.
    • F3A / Acro brake (brake intensity steplessly adjustable in flight).
    • Min and Max values ​​are logged and can be displayed in the optional PC tool after the flight (for example, power)
    • Speed ​​limit: 240,000 rpm (2-pole)
    • Overtemperature / overload warning
    • Anti-glare: reduces the start-up spark.
    • Basic programming via mode setup.
    • Fine adjustment and choice of telemetry protocol via PC setup, suitable USB adapter is optionally available.

     

    SKU: YGE135SLIM
    €229.00
    inc. VAT

     LOW STOCK
  • Blade Holder

    Blade Holder

    A quick & simply way to store your blades for transport. This universal blades caddy is made from laminated high density foam to protect your rotor tips whilst holding them securely. Will suit tailbooms ranging between 20 - 25mm

    New, avaliable in 4 sizes, from Micro helis, till 90 size. The sizes are different, please choose as per your model size
    Please choose from Product options

    SKU: RCUO-A051
    €4.50
    inc. VAT

     IN STOCK
  • NANOBEAST PRO-EDITION control unit for small RC model helicopters

    NANOBEAST PRO-EDITION control unit for small RC model helicopters

    NANOBEAST PRO-EDITION control unit for small RC model helicopters

    The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level.
    The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot.
    The steering feel can be adjusted from tame to extremely agile.
    Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional.
    This ProEdition offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsteady attitude, as well as a bank switching, which makes it possible to switch between different parameter sets in flight.

    For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required. Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface.
    This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.


    Supported receiver types / transmission protocols

    • SRXL: JR® XBus (Mode B), Multiplex® SRXL (V1 + V2), Jeti® UDI, Graupner / SJ® HOTT SUMD, Spektrum® SRXL
    • Futaba® SBUS
    • Single satellite (Spektrum® DSM2 / DSMX, JR® RJ-01 DMSS)
    • Jeti® EXBUS
    • ALIGN / FlySky iBus
    • PPM sum signal (SPPM)


    Technical specifications

    • Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM sum signal
    • Input voltage: 4.8V to 6.0V
    • Recommended helicopter size: 180 - 250 electric helmets
    • Dimensions: 32x20x10mm
    • Weight: 5.8g


    Delivery:

    • 1x NANOBEAST control unit
    • 1x patch cable for sum signal receiver
    • 2x adhesive pad
    • 1x manual
    • 1x decal sheet
    SKU: BXM76900PE
    €169.90
    inc. VAT

     LOW STOCK
  • NANOBEAST control unit for small RC model helicopters

    NANOBEAST control unit for small RC model helicopters

    NANOBEAST control unit for small RC model helicopters

    The NANOBEAST is a control unit for small and smallest RC model helicopters without auxiliary rotor level.
    The integrated gyroscopic elements stabilize the helicopter as much as possible so that it follows only the control commands of the pilot. The steering feel can be adjusted from tame to extremely agile.
    Thus, the model meets almost all requirements of pilots, no matter if beginner or 3D professional. Through a paid firmware upgrade, the system can be extended to "ProEdition".
    This offers additional functions such as the AttitudeControl for position stabilization and rescue of the model in unsafe attitude, as well as a bank switching, which allows to switch between different parameter sets in flight.
    For basic setting and tuning of the system a computer (Windows / mac), a smartphone or tablet (iOS / Android) with Bluetooth LE is required. Depending on the technology used, you will still need a USB2SYS (for computer) or BLE2SYS (for smartphone / tablet) interface.
    This is not included and must be purchased separately! The configuration then takes place via the StudioX software, which is offered for free download.


    Supported receiver types / transmission protocols

    • SRXL: JR® XBus (Mode B), Multiplex® SRXL (V1 + V2), Jeti® UDI, Graupner / SJ® HOTT SUMD, Spektrum® SRXL
    • Futaba® SBUS
    • Single satellite (Spektrum® DSM2 / DSMX, JR® RJ-01 DMSS)
    • Jeti® EXBUS
    • ALIGN / FlySky iBus
    • PPM sum signal (SPPM)


    Technical specifications

    • Receiver connections: Spektrum® / JR® single satellite, sum signal connector for Graupner® HOTT, Futaba® SBus, Jeti® exBus, FlySky® iBus, FrSky® SRXL, Multiplex® SRXL, JR® XBus (B), Spectrum® SRXL, Align® iBus, SPPM sum signal
    • Input voltage: 4.8V to 6.0V
    • Recommended helicopter size: 180 - 250 electric helmets
    • Dimensions: 32x20x10mm
    • Weight: 5.8g


    Delivery:

    • 1x NANOBEAST control unit
    • 1x patch cable for sum signal receiver
    • 2x adhesive pad
    • 1x manual
    • 1x decal sheet
    SKU: BXM76900
    €89.90
    inc. VAT

     LOW STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

     LOW STOCK
    SALE
  • Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC YGE 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controler ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

     LOW STOCK
    SALE
  • Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    This is the Beam AvantGarde 600 Class Electric Flybarless Helicopter Kit. This easily serviced helicopter features an innovative design that provides reduced weight and a low parts count. Other features include a quiet direct drive tail system, a fully serviceable CNC machined swash plate, heavy duty carbon fiber frames and much more, wrapped up inside a durable aerodynamic fiberglass canopy.

    Beam is 100% produced in Korea. no cheap parts, no bad bearings- all high quality!!

    One of the only kits allow choice of 6 and 12S lipos, where you beginner or competition pilot- this machine is for you.

    Features:

    • Innovative design allows for reduced wieght, easy servicing and low parts count
    • Durable canopy with aerodynamic design
    • Fully serviceable CNC swash plate
    • Triple bearing block design
    • Robust carbon fiber frames
    • Ultra quiet direct drive tail system
    • Turnbuckle pitch link design
    • Herringbone cut main gear & pinion gear design

    Specifications:

    • CNC full metal precision rotor head w/8mm spindle.
    • 11 tooth 6mm shaft size pinion, mod 0.8 (straight cut).
    • 100 tooth main gear, mod 0.8 (straight cut).
    • 4.0: 1 Tail Gear Ratio
    • Designed for power system up to 6S or 12S Li-Po
    • Carbon fiber frames for ultra-rigid and compact design
    • Easily serviceable engine maintenance
    • Triple bearing supported 10mm hardened main shaft
    • 120 degree dual race ball bearing metal swashplate
    • High quality DuPont® plastic injection mold w/strengthening fibers
    • Stainless steel damper mounted bearing torque tube for high efficiency
    • Top to bottom supported tail pitch plate for improved accuracy
    • Dual race ball bearing with thrust bearing supported tail blade grips
    • Front mounted rudder servo with push/pull bell crank
    • Carbon tail boom supports
    • Sleek Pre-painted fiberglass canopy
    • New lightweight landing gear
    SKU: BEAMAV600
    €399.00 €599.00
    inc. VAT

    SALE
  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • CF Ferrar Blades

    CF Ferrar Blades

    Walt Ferrar Carbon Fiber Tail Blades are made for FP and CP Micro helicopters to improve tail controls and tail performance.Weight: 0.41 gramsUsage: Micro HelisFeatures: Length: 43mm or 48mmRoot Thickness: 2mm Mounting Hole: 2.00mm
    SKU: SKU6412
    €9.90 €18.00
    inc. VAT

    
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €299.00
    inc. VAT

     LOW STOCK
    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesnt qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

     LOW STOCK
    SALE
  • Wooden Blades 550 mm

    Wooden Blades 550 mm

    Low cost, and yet excellent product for Beginner and for Aerobatic practicing.
    Durable blades, made for 3-4 layers of quality wood, will deliver excellent performance without making holes in the pocket.

    Fits all 30-50 (550)size helis, length 550mm

    SKU: RCWB-550
    €10.00 €26.00
    inc. VAT

    SALE

Manufacturers

Latest Video

RC Market