X-NOVA Motors

Products


  • Xnova 2204-2600 prop adaptor

    Xnova 2204-2600 prop adaptor

    Xnova  2204-2600 prop adaptor replacement set

    SKU: 2204prop
    €5.00
    inc. VAT

     IN STOCK
    NEW
  • XNOVA 3215-930kv brushless motor TAREQ editon for Goblin 380

    XNOVA 3215-930kv brushless motor TAREQ editon for Goblin 380

    Xnova brushless high performance outrunner motor designed for  EXTREME 3D flying AND still good flight times,
    specially made for your SAB-Goblin 380 helicopter where highest power to weight ratio is important.
    We carefully optimized and tested this Motor with  TAREQ ALSAADI under extreme condition.

    ESC Settings

    Xnova XTS motors are not picky about ESC settings.  Most default settings are just  fine, but there are some things to consider.

    Xnova XTS motors make best power with low timing. You may want to set timing at around 5 to maintain power and efficiency, then play with PWM to adjust temperature of ESC and motor. As you already found out the ESC gets warmer as you increase the frequency while the motor gets cooler, and vice versa.

    Heli specific setup:

    Governor setup is critical for a constant head speed.  Too low a throttle set point  will overstress the entire power system.  Pulling 100A at 50% duty cycle on the  esc produces very high current ripple and high peak currents in the system.  This  reduces efficiency a great deal.  Also remember that 50% throttle on the  transmitter may or may not be 50% throttle (duty cycle) in the ESC.  These values  may not be directly related.

    For a 3D heli setup, the gearing, motor kv, and head speed should be chosen so that at the highest power draw the ESC still has some "headroom" to operate.

    SKU: XN3215-930kv
    €159.00
    inc. VAT

  • Xnova brushless 4020-1200Kv. outrunner motor for 500-620 helicopters,36mm shaft

    Xnova brushless 4020-1200Kv. outrunner motor for 500-620 helicopters,36mm shaft

    Xnova brushless 4020-1200Kv. high performance outrunner motor for 500-620 size helicopters on 6S up to 8S setups.
    Exellent choice for Goblin 500, Logo 500, Gaui X5 or Synergie E5.
    The motor choice in between power and long flight time.

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.
    • Marked leading high effiency up to 92%.
    • Superb quality and machining of CNC parts.

    Engineering characteristic:

    • Max cont. current : 105A
    • Max Continuous Power: 2400W
    • Peak Continuous Power (5s): 2900W
    • Shaft Length: Type A, 36mm
    • Body Length: 52mm
    • Diameter: 49,5mm
    • Mounting Holes CTC Distance: 25mm
    SKU: XN4020-1200-2YA
    €189.00
    inc. VAT

  • Xnova brushless 4025-560Kv. outrunner motor for 550-620 helicopters

    Xnova brushless 4025-560Kv. outrunner motor for 550-620 helicopters

    Xnova brushless high performance outrunner motor for 550-620 size helicopters for sport flying on 8s-10s or extreme flying on 10-12s.
    Extreme powerful motor for Goblin 570, Synergy E5 - E6, Logo 500, Gaui X5,T-rex 600 or Logo 600.

    Specification:
    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.
    • Marked leading high effiency up to 93,5%.
    • Superb quality and machining of CNC parts.
    Engineering characteristic:

    • Max cont. current : 68A
    • Max Continuous Power: 3000W
    • Peak Continuous Power (5s): 4000W
    • Shaft Length: 36mm
    • Body Length: 56mm
    • Diameter: 49,5mm
    • Mounting Holes CTC Distance: 25mm
    SKU: XN4025-560KV-3Y-A
    €239.00
    inc. VAT

     72HR STOCK
  • Xnova brushless 4030-560Kv. outrunner motor for 600-700 size helicopters

    Xnova brushless 4030-560Kv. outrunner motor for 600-700 size helicopters

    Xnova brushless 4030-560Kv. high performance outrunner motor for 600-700 size helicopters for hard 3d flying on 10-12s.
    Peak efficiency occurs at ~65A on 10s.
    For sport flying or longer flight times, the 3y is more suited.

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.
    • Marked leading high efficiency up to 92%.
    • Superb quality and machining of CNC parts.

    Engineering characteristic:

    • Max cont. current : 92A
    • Max Continuous Power: 3400W
    • Peak Continuous Power (5s): 5000W
    • Shaft Length: 38mm
    • Body Length: 61mm
    • Diameter: 49,5mm
    • Mounting Holes CTC Distance:  30mm
    SKU: XN4030-560-2,5YA
    €199.00

  • Xnova brushless 4035-400KV Outrunner motor for 12S crazy power 3D flying

    Xnova brushless 4035-400KV Outrunner motor for 12S crazy power 3D flying

    Xnova brushless 4035-400KV Outrunner motor for 12S crazy power 3D flying

    Xnova brushless high performance outrunner motor for 620mm to 700mm blade  size helicopters for 3d flying on 12s.  It is also a good efficient AP motor.

    For 620mm to 700mm blade  size helicopters for 3d flying on 12s.  It is also a good efficient AP motor.

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.(2 on top 1 at bottom)
    • Marked leading high effiency up to 92%.
    • Superb quality and machining of CNC parts.

    Specification:

    • Slots & Poles     24n8p
    • Winding T     3Y
    • rpm/V     400
    • Volt (V)     10 | 20 | 30
    • Io(A)     0.8 | 1 | 1.2
    • Rm (mohm)     23 | 23 | 23
    • Weight (without connector) (g)     483
    • Body Length (no shaft) mm     65.75
    • Diameter (mm)     49.5
    • Shaft Length (mm) (Details pictures)     | 41 | 27
    • Shaft Dia. (mm)     6
    • Mounting Holes CTC Distance (mm)     25 | 30
    • Mounting Screw     2 x M4 | 2 x M4
    • Max Eff. Curr.     18.65 | 29.49 | 39.56
    • Max Eff.     91.42 | 93.22 | 93.93
    • Kt (Nm/A     239
    • Km (Nm/sqrt(w))     0.1574
    • Max Continuous Power(Watts)     3500
    • Peak Continuous Power(Watts) (5 sec)     5300
    • Max cont. current (A)     78

     

     

     

    SKU: XN4035-400KV
    €269.00
    inc. VAT

     LOW STOCK
  • Xnova brushless 4035-480Kv. outrunner motor for 700 size helicopters

    Xnova brushless 4035-480Kv. outrunner motor for 700 size helicopters

    Xnova brushless high performance outrunner motor for 700 or larger size helicopters for 3d flying on 12s or sport flying on 10s.

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.
    • Marked leading high effiency up to 92%.
    • Superb quality and machining of CNC parts.
    Engineering characteristic:

    • Max cont. current : 85A
    • Max Continuous Power: 3800W
    • Peak Continuous Power (5s): 5600W
    • Shaft Length: 41mm
    • Body Length: 66mm
    • Diameter: 49,5mm
    • Mounting Holes CTC Distance:  30mm
    SKU: XN4035-480-2,5YA
    €279.00

     72HR STOCK
  • Xnova brushless 4530-450Kv. outrunner motor for 14S hard 3D 700-800 helicopter

    Xnova brushless 4530-450Kv. outrunner motor for 14S hard 3D 700-800 helicopter

    Xnova brushless high performance outrunner motor designed for 14S hard 3D 700-800 helicopter
    where highest power to weight ratio is important and 12S sport 3D 700-800mm heli flying.

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.
    • Marked leading high effiency up to 92%.
    • Superb quality and machining of CNC parts.
    Engineering characteristic:

    • Max cont. current : 110A
    • Max Continuous Power: 5000W
    • Peak Continuous Power (5s): 10000W(2S)
    • Shaft Length: 38mm
    • Body Length: 60,5mm
    • Diameter: 55,7mm
    • Mounting Holes CTC Distance: 30mm
    SKU: XN4530-450-9DA
    €402.00
    inc. VAT

     72HR STOCK
  • Xnova brushless 4530-480Kv. outrunner motor for extreme 3D 700-800 helicopter

    Xnova brushless 4530-480Kv. outrunner motor for extreme 3D 700-800 helicopter

    Xnova brushless high performance outrunner motor designed for extrem 3D 700-800mm helicopter where highest power to weight ratio is important.
    12S and specially 14S optimised.

    Specification:
    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 300 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.
    • Marked leading high effiency up to 93%.
    • Superb quality and machining of CNC parts.
    • Improved torque and power output.
    • 1.4 mm thick wire.
    Engineering characteristic:
    • Max cont. current : 130A
    • Max Continuous Power: 5600W
    • Peak Continuous Power (5s): 11000W (2S)
    • Shaft Length: 27mm
    • Body Length: 60,5mm
    • Diameter: 55,7mm
    • Mounting Holes CTC Distance: 30mm
    SKU: XN4530-480-XTSB
    €402.00
    inc. VAT

     72HR STOCK
  • Xnova brushless 4530-500-Kv.outrunner motor for 12S hard 3D 700-800 helicopter

    Xnova brushless 4530-500-Kv.outrunner motor for 12S hard 3D 700-800 helicopter

    Xnova brushless high performance outrunner motor designed for 12S hard 3D 700-800 helicopter where highest power to weight ratio is important.

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • Optimized ventilation.
    • High quality NMB bearings.
    • Marked leading high efficiency up to 92%.
    • Superb quality and machining of CNC parts.
    Engineering characteristic:

    • Max cont. current : 120A
    • Max Continuous Power: 5000W
    • Peak Continuous Power (5s): 10000W (2S)
    • Shaft Length: 28mm
    • Body Length: 60,5mm
    • Diameter: 55,7mm
    • Mounting Holes CTC Distance: 30mm

    SKU: XN4530-500-8DA
    €402.00

     72HR STOCK
  • Xnova brushless 4530-525Kv. outrunner motor for extreme 3D 700-800 helicopter

    Xnova brushless 4530-525Kv. outrunner motor for extreme 3D 700-800 helicopter

    Xnova brushless high performance outrunner motor designed for extrem 3D 700-800mm helicopter where highest power to weight ratio is important.
    Recommended for specially 12S.

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 300 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • High quality NMB bearings. (2 on top 1 at bottom)
    • Marked leading high effiency up to 94%.
    • Cooler running.
    • Superb quality and machining of CNC parts.
    • Improved torque and power output.
    • 1.5 mm thick wire.

    Engineering characteristic:
     

    • Max cont. current : 140A
    • Max Continuous Power: 5100W
    • Peak Continuous Power (5s): 11000W (2S)
    • Shaft Length: 38mm
    • Body Length: 60,5mm
    • Diameter: 55,7mm
    • Mounting Holes CTC Distance: 30mm

     

    SKU: XN4530-525-XTSA
    €402.00
    inc. VAT

     72HR STOCK
  • Xnova brushless 4535-460Kv. outrunner motor for 12S and 14S crazy power 3D flying

    Xnova brushless 4535-460Kv. outrunner motor for 12S and 14S crazy power 3D flying

    Xnova XTS brushless high performance outrunner motor designed for 12S and 14S crazy power 3D flying,
    from 700 and up to 800mm size helicopter where highest power to weight ratio is important.
    One of the most powerfull motor currently available. Also a perfect fit for speed flying.
    This motor will bring your 800 size to a different level!

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 300 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • High quality NMB bearings. (2 on top 1 at bottom)
    • Marked leading high effiency up to 93%.
    • Cooler running.
    • Superb quality and machining of CNC parts.
    • Improved torque and power output.
    • 1.5 mm thick wire.

    Engineering characteristic:

    • Max cont. current : 160A
    • Max Continuous Power: 6600W
    • Peak Continuous Power (5s): 13000W (2S)
    • Shaft Length: 41mm
    • Body Length: 65,5mm
    • Diameter: 55,7mm
    • Mounting Holes CTC Distance: 30mm
    SKU: XN4535-460-XTSA
    €399.00

     LOW STOCK
  • Xnova brushless 4535-520Kv. outrunner motor for 12S extreme hard 3D flying

    Xnova brushless 4535-520Kv. outrunner motor for 12S extreme hard 3D flying

    Xnova brushless high performance outrunner motor designed for 12S extreme hard 3D flying, 700 and up to 800mm size helicopter where highest power to weight ratio is important.
    One of the most powerfull motor currently available. Also a perfect fit for speed flying.
    This Motor will bring your 800 size to a different level!

    Specification:

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 300 degree C.
    • Precise balanced.
    • High performance stator metal sheet.
    • High quality NMB bearings. (2 on top 1 at bottom)
    • Marked leading high effiency up to 94%.
    • Cooler running.
    • Superb quality and machining of CNC parts.
    • Improved torque and power output.
    • 1.6 mm thick wire.
    Engineering characteristic:

    • Max cont. current : 180A
    • Max Continuous Power: 6500W
    • Peak Continuous Power (5s): 13000W (2S)
    • Shaft Length: 41mm
    • Body Length: 65,5mm
    • Diameter: 55,7mm
    • Mounting Holes CTC Distance: 30mm
    SKU: XN4535-520-XTSA
    €399.00

     LOW STOCK
  • Xnova Brushless Multicopter Motor 4808-700KV

    Xnova Brushless Multicopter Motor 4808-700KV

    Features:

    • Muticopter with 10" to 16" Prop size.
    • 3S to 6S Lipo Cells
    • High performance and finest CNC quality
    • Ultimate efficiency
    • Low cogging torque and smooth running
    • Precise balanced and fully tested
    • Ø3.175-8mm Shaft

     

    SKU: XN4808-700
    €65.00
    inc. VAT

     IN STOCK
  • Xnova RM 2204-2300KV FPV Racing Motor

    Xnova RM 2204-2300KV FPV Racing Motor

    Xnova's 2204-2300KV supersonic FPV racing motor is the ultimate in precision, quality and performance. 100% hand wound and fully tested, these motors are precisely balanced and give FPV racers a high quality motor option.

    Specification:

    • Muticopter with 5*3,5" to 5*4.5" Prop size.
    • 3S to 4S Lipo Cells
    • High performance and finest CNC quality
    • Ultimate efficiency
    • Low cogging torque and smooth running
    • Precise balanced and fully tested
    • 100% handwound

    Set of 1 motor

    SKU: XN2204-2300KV
    €15.00
    inc. VAT

     IN STOCK
    NEW
  • Xnova Spare Shaft 4020 type A

    Xnova Spare Shaft 4020 type A

    Xnova Spare Shaft 4020 type A
    SKU: XN4020-6-36-A
    €7.90

     LOW STOCK
  • Xnova Spare Shaft 4020 type B

    Xnova Spare Shaft 4020 type B

    Xnova Spare Shaft 4020 type B
    SKU: XN4020-6-22-B
    €7.90

     LOW STOCK
  • Xnova Spare Shaft 4035 type A

    Xnova Spare Shaft 4035 type A

    Xnova Spare Shaft 4035 type A
    SKU: XN4035-6-41-A
    €7.90

     LOW STOCK
  • Xnova Spare Shaft 4535 type A

    Xnova Spare Shaft 4535 type A

    Xnova Spare Shaft 4535 type A
    SKU: XN4535-6-41-A
    €7.90
    inc. VAT

     LOW STOCK
  • Xnova Spare Shaft 4535 type C

    Xnova Spare Shaft 4535 type C

    Xnova Spare Shaft 4535 type C
    SKU: XN4535-8-61-C
    €7.90
    inc. VAT

     LOW STOCK
  • Xnova Supersonic Racing 1806-2300kv Brushless Motor Combo 4pcs.

    Xnova Supersonic Racing 1806-2300kv Brushless Motor Combo 4pcs.

    Xnova provides you the latest and highest quality multi-rotor brushless motors. Through many years of experiences, testing, and optimization; these motors are made from finest components and guaranteed for the best performance and high efficiency level. Each Xnova motor is exclusively performance guaranteed and comes with the highest quality control before shipment.

    Combo includes (4) four motors.

    Features:

    • High performance and finest CNC quality.
    • Ultimate efficiency.
    • Low cogging torque and smooth running.
    • Precisely balanced and fully tested.
    • 100% handwound.


    Kv (rpm/V): 2300
    Io (No load A): 0.7A
    Rm (Resistance): 0.120Ohm
    Shaft Diameter: 2mm
    Motor Diameter: 28mm
    Motor Length: 18.5mm
    Motor Weight: 21g

    SKU: XN1806-2300KV
    €86.00
    inc. VAT

     LOW STOCK
  • Xnova XTS 2204-2600KV Supersonic FPV Motor Racing Combo 4pcs

    Xnova XTS 2204-2600KV Supersonic FPV Motor Racing Combo 4pcs

    Xnova XTS 2204-2600KV Supersonic FPV Motor Racing Combo 4pcss

    Xnova provides you the latest and highest quality multi-rotor brushless motors. Through many years of experiences, testing and optimization; these motors are made from finest components and guaranteed for the best performance and high efficiency level. Each Xnova motor is exclusively performance guaranteed and comes with the highest quality control before shipment. Xnova multi-rotor brushless motors will convince you by performance, and not just datasheets,,,

    Specification:

    • Muticopter with 5*3,5" to 5*4.5" Prop size.
    • 3S to 4S Lipo Cells
    • High performance and finest CNC quality
    • Ultimate efficiency
    • Low cogging torque and smooth running
    • Precise balanced and fully tested
    • 100% handwound

    SKU: XN2204-2600KV
    €99.90
    inc. VAT

     72HR STOCK
  • Xnova XTS 2216-4100kv 6P brushless motor for OXY, Sport flyer.

    Xnova XTS 2216-4100kv 6P brushless motor for OXY, Sport flyer.

    Xnova XTS 2216-4100kv 6P brushless motor for OXY, Sport flyer.

    Xnova brushless high performance outrunner motor designed for extrem 3D, 220-285mm bladesize helicopter where highest power to weight ratio is important. Its a extreme power upgrade for your OXY 3, developed and aprooved with TAREQ ALSAADI

    ( Recommeded ESC for  2216 series ; YGE-40A ; HW 40A Platinum V3, USE DEFAULT SETTINGS )

    • High qual. Neodym Mag.heat res. up to 150 degree C.
    • Specialized wires,heat resistance up to 250 degree C.
    • Precise balanced.eur
    • High performance stator metal sheet.
    • High quality NMB bearings.
    • Marked leading high effiency up to 88%.
    • Cooler running.
    • Superb quality and machining of CNC parts.
    • Improved torque and power output.

    Specification:

    • Slots & Poles    9n6p
    • Winding T    D
    • rpm/V    4100
    • Volt (V)    10/ 15
    • Io(A)    4.2 / 5.8
    • Rm (mohm)    15
    • Weight (without connector) (g)    77
    • Body Length (no shaft) mm    33.8
    • Diameter (mm)    28.5
    • Shaft Length (mm) (Details pictures)    14.5
    • Shaft Dia. (mm)    A=4mm to 3.17 on pinion side
    • Mounting Holes CTC Distance (mm)    16*4
    • Mounting Screw    M3x0.5
    • Max Eff. Curr.    52.92 / 76.16
    • Max Eff.    84.13/ 84.77
    • Kt (Nm/A    0.0023
    • Km (Nm/sqrt(w))    0.0190
    • Max Continuous Power(Watts)    580
    • Peak Continuous Power(Watts) (2 sec)    not provided
    • Max Continuous Current(Amps)    36
    SKU: XN2216-4100KV
    €85.00
    inc. VAT

  • Xnova XTS 2820-890KV 10P brushless motor for Goblin 380, Sport flyer

    Xnova XTS 2820-890KV 10P brushless motor for Goblin 380, Sport flyer

    Designed for powerfully 3D and excellent flight-time , custom made for your SAB-GOBLIN-380 helicopter where highest performance to weight ratio is important.
    Xnovamotors specifications are real data and not modified,,  we convince you by flight-performance and not datasheets

    SPECS:
    • Slots & Poles    12n10p
    • Winding T    10YY
    • rpm/V    890
    • Volt (V)    10 / 22.2
    • Io(A)    1.2 / 1.7
    • Rm (mohm)    34 / 34
    • Weight (without connector) (g)    140
    • Body Length (no shaft) mm    40.7
    • Diameter (mm)    36
    • Shaft Length (mm) (Details pictures)    A
    • Shaft Dia. (mm)    5
    • Mounting Holes CTC Distance (mm)    25
    • Mounting Screw    M3x0.5
    • Max Eff. Curr.    17.77 / 31.51
    • Max Eff.    86.49 / 89.21
    • Kt (Nm/A    0.0107
    • Km (Nm/sqrt(w))    0.0550
    • Max Continuous Power(Watts)    1080
    • Peak Continuous Power(Watts) (2 sec)    1360
    • Max Continuous Current(Amps)    48
    SKU: XN2820-890KV
    €119.00
    inc. VAT

     72HR STOCK

Manufacturers

Back