Upgrades Align T-rex 600

Upgrades Align T-rex 600

Here you can find upgrades for Trex-600 Nitro and Electric. unless specified, the Upgrades are Common to both helicopters.

Products


  • 3D Lightweight Tail Clamp

    3D Lightweight Tail Clamp

    Suitable for ALIGN TRX-600 Nitro & Electric

    Lightweight alloy tail clamp for 3D pilots, positive split clamping system with increased surface contact area for a secure fitment. There is no horizontal tail plane mounting provision on this clamp saving weight and further reducing aerodynamic drag.

    The clamp itself despite being machined from alloy is 9% lighter than the original plastic two piece clamp. With the carbon tailplane used on the Nitro this gives a 6g weight reduction and on the plastic fin used on the Electric an 11g reduction.

    Supplied complete with high tensile socket fixing screws and available in both black and silver finishes.

    Component weight 5.2g

    SKU: TXT-12
    €18.00
    inc. VAT

     IN STOCK
  • 600 Carbon Fiber Tail Boom

    600 Carbon Fiber Tail Boom

    3K carbon fiber tail boom for T-REX 600

    SKU: HN6097
    €27.00
    inc. VAT

     LOW STOCK
  • 600/700 SS Tail Hub

    600/700 SS Tail Hub

    Replacement tail hub for use with Quick UK tail grip assembly

    Warning - This tail hub can only be used with Quick UK tail grips

    SKU: TXT-11A
    €7.00
    inc. VAT

     72HR STOCK
  • 600E Main Shaft Bearing Block

    600E Main Shaft Bearing Block

    600 Metal Main Shaft Bearing Block

    SKU: H60154
    €26.00
    inc. VAT

     72HR STOCK
  • 600ESP Servo Linkage Rod

    600ESP Servo Linkage Rod

    Use for T-REX 600ESP.

    ●Linkage rod(E) x 2(Φ1.96x32mm)
    ●Linkage rod(C) x 4(Φ1.96x50mm)

    SKU: H60193
    €4.50
    inc. VAT

     72HR STOCK
  • 600N Bottom Ground Plate

    600N Bottom Ground Plate

    Stronger plate to reinforce the frames set, stronger then original one.

    Avaliable in CF Silver.

    SKU: RCM20036
    €8.00
    inc. VAT

  • 600N Mixture Servo Mount

    600N Mixture Servo Mount

    600N mixture servo mount x 1
    Socket button head self tapping screw x 1(T3x12mm)

    SKU: HN6086
    €7.00
    inc. VAT

     LOW STOCK
  • 600N Silver Carbon Side Frame (2mm)

    600N Silver Carbon Side Frame (2mm)

    Very strong 2mm Silver Carbon Black material side frames for T-REX 600 Nitro version.

    The frame set includes bearings installed. This upgrade is to improve over stock weak frame set which is only 1.6mm and are very easy to break.

    Set inclusive of 2 frames and 2 Ball bearings

    SKU: HN6057
    €69.00
    inc. VAT

     LOW STOCK
  • Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (Black)

    Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (Black)

    This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. BLACK

    Specifications:

    • Base length is 14mm
    • Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
    • Cut the Nylon Collars to require length.
    • Canopy Rubber Grommet openings diameter 7.2~7.5mm

    Includes:

    • 2x Fast Mounting Canopy Mount
    • 2x M3x20 Set Screw
    • 2x M3x16 Set Screw
    • 2x Rubber Grommet
    • 2x 7x6MM Nylon Collar
    • 2x 7x8MM Nylon Collar
    • 2x 7x10MM Nylon Collar
    SKU: HC-FMCM-B
    €22.99
    inc. VAT

     IN STOCK
  • Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

    Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

    This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. WHITE.

    Specifications:

    • Base length is 14mm
    • Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
    • Cut the Nylon Collars to require length.
    • Canopy Rubber Grommet openings diameter 7.2~7.5mm

    Includes:

    • 2x Fast Mounting Canopy Mount
    • 2x M3x20 Set Screw
    • 2x M3x16 Set Screw
    • 2x Rubber Grommet
    • 2x 7x6MM Nylon Collar
    • 2x 7x8MM Nylon Collar
    • 2x 7x10MM Nylon Collar
    SKU: HC-FMCM-W
    €22.90
    inc. VAT

     IN STOCK
  • Align 90 Carbon Fiber Tail Blade

    Align 90 Carbon Fiber Tail Blade

    3K carbon fiber made, new light-weight design, improve the efficiency of tail blade to make more precision on tail rudder control.

    • Shape: Symmetrical wing
    • Length: 90mm
    • Width: 4.9mm
    • Shaft Diameter: 3mm
    • Weight: 9g/set
    SKU: HQ0900C
    €19.90
    inc. VAT

     LOW STOCK
  • Bevel Main Drive Gear/188T

    Bevel Main Drive Gear/188T

    Main drive gear(188T) x 2 ( Helical)

    SKU: H60062
    €14.00
    inc. VAT

     LOW STOCK
  • Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition.
    Fits RJX helicopters, also can fit Align and other models 600-700 size.
    Comes with metal adapters.
    SKU: UP61066
    €34.00
    inc. VAT

     IN STOCK
  • Carbon Stabilizer set

    Carbon Stabilizer set

    Carbon fiber Fin set for Trex 600.

    Avaliable in black.

    SKU: H60048
    €19.90
    inc. VAT

     IN STOCK
  • D6BH Servo Horn (3 pcs)

    D6BH Servo Horn (3 pcs)

    D6BH Servo Horn (3 pcs) for the T-Rex 600.

    Use for Hitec Servo

    SKU: HSP61005
    €5.00
    inc. VAT

     72HR STOCK
  • Eolo /Spirit  Screw Set

    Eolo /Spirit Screw Set

    Set of screws , all you need to have for repairing an Eolo/ Spirit heli. Purchase this set and you save more then 50% of cost. Included in the package

    QTY
    S0030 M3x8 caphead x10
    S4354 M2.5x6 caphead x10
    S0079 M3x5 caphead x10
    S0041 M3x3 grubscrew x 20
    S3370 M2.5x8 caphead x10
    S0116 M2.5x10 caphead x10
    S0029 M2x8 caphead x10
    S0114 M2x12 caphead x 10
    S0039 M3x10 caphead x 10
    S0100 M2.5x4 caphead x10
    S0117 M2x5 caphead x10
    S0080 M2x10 caphead x10
    S4141 M3x6 caphead x10
    S0074 M2x14 caphead x10
    S4300 M2x6 caphead x10

    SKU: SKU11213
    €28.00 €57.00
    inc. VAT

     IN STOCK
  • Fiberglass Stabilizer/2.0mm

    Fiberglass Stabilizer/2.0mm

    ●3K fiberglass vertical stabilizer x 1
    ●3K fiberglass horizontal stabilizer x 1

    SKU: HN6059
    €13.80
    inc. VAT

     72HR STOCK
  • Gyro mount for 600N

    Gyro mount for 600N

    Canopy Mounting Bolt x 2
    Socket button head self tapping screw(T3x8mm) x 2
    M3x16 Set screw x 2
    Frame mounting bolt x 1
    Gyro Mount x 1
    SKU: HN6051
    €7.00
    inc. VAT

     LOW STOCK
  • H Servo Horn Set

    H Servo Horn Set

    Use for Hitec Servo

    ●Quantity: 3 pcs

    SKU: HN6049
    €3.90
    inc. VAT

     LOW STOCK
  • High Pressure Cooling Fan

    High Pressure Cooling Fan

    TREX 600 High Pressure Cooling Fan.

    Designed to deliver high volume at high pressure, this fan features 9 full form aerofoil profiled and angled blades to provide greater cooling capacity . Ideal for hot & high environments, allowing a leaner (more powerful) engine run. A direct replacement for the stock plastic fan.

    The underside of this fan features a pair of machined pockets suitable for the mounting of 4.1mm diameter throttle governor magnets as used in the Futaba GV-1, Throttle Jockey and Rev-Lock units

    Weight - 21.10 g , Silver Color

    SKU: TXD-07
    €29.00
    inc. VAT

     72HR STOCK
  • Hook & Loop Fastening Tape

    Hook & Loop Fastening Tape

    Hook & Loop fastening tape x 2

    SKU: H60054
    €4.80
    inc. VAT

     72HR STOCK
  • Hook and Loop Tape 500

    Hook and Loop Tape 500

    Hook & Loop Tape 500-600 size, (5pcs)

    SKU: HN6023
    €5.30
    inc. VAT

     72HR STOCK
  • Link Rod coupler

    Link Rod coupler

    Use to attach long pushrods to each other
    SKU: KRW117
    €3.00
    inc. VAT

     IN STOCK
  • Linkage Ball Set

    Linkage Ball Set

    Steel ball parts is made of rigid stainless steel, features wear-resisting, and anti-oxidization. Therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight

    Linkage ball A x6 (4.75x8.68mm)
    Linkage ball B x6 (4.75x9.77mm)
    Linkage ball B1 x6 (4.75x12.77mm)
    Linkage ball A1 x6 (4.75x8.68mm)
    Long linkage ball x1 (4.75x24.59mm)

    SKU: H60089
    €10.00
    inc. VAT

     LOW STOCK

Manufacturers

Back