Upgrades TT Raptor 50

Upgrades TT Raptor 50 All Raptor 50 and TZ compatible  series upgrades.

Products


  • 60-90 Flybar Hardened 4mm

    60-90 Flybar Hardened 4mm

    Made from precision ground steel for excellent strength and corrosion resistance. Those flybars can help to improve hover stability for novice flyers and more 3D response for expert flyers.

    Pack of 1 piece, 4mm diameter, 52cm long.

    SKU: SKU14553
    €4.00
    inc. VAT

     IN STOCK
  • Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (Black)

    Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (Black)

    This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. BLACK

    Specifications:

    • Base length is 14mm
    • Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
    • Cut the Nylon Collars to require length.
    • Canopy Rubber Grommet openings diameter 7.2~7.5mm

    Includes:

    • 2x Fast Mounting Canopy Mount
    • 2x M3x20 Set Screw
    • 2x M3x16 Set Screw
    • 2x Rubber Grommet
    • 2x 7x6MM Nylon Collar
    • 2x 7x8MM Nylon Collar
    • 2x 7x10MM Nylon Collar
    SKU: HC-FMCM-B
    €22.99
    inc. VAT

     IN STOCK
  • Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

    Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

    This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. WHITE.

    Specifications:

    • Base length is 14mm
    • Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
    • Cut the Nylon Collars to require length.
    • Canopy Rubber Grommet openings diameter 7.2~7.5mm

    Includes:

    • 2x Fast Mounting Canopy Mount
    • 2x M3x20 Set Screw
    • 2x M3x16 Set Screw
    • 2x Rubber Grommet
    • 2x 7x6MM Nylon Collar
    • 2x 7x8MM Nylon Collar
    • 2x 7x10MM Nylon Collar
    SKU: HC-FMCM-W
    €22.90
    inc. VAT

     IN STOCK
  • Aileron Set Raptor

    Aileron Set Raptor

    AILERON LEVER SET - UPGRADE 30/50V2

    SKU: RCUO-107
    €29.00 €37.00
    inc. VAT

     IN STOCK
  • Bell-Hiller mixing Arms

    Bell-Hiller mixing Arms

    RAPTOR 30/50 V1 & V2These control levers are both strong and light and perfect for the high control loads encountered during demanding 3D style flying particularly with 46/50 powered machines swinging 600mm blades. Machined from solid and fitted with extra wide (5mm each) twin bearings for zero side movement and high durability. Control balls are hardened steel with M3 fixing threads and come pre-installed along with a pair of socket cap style mounting screws.

    SKU: RCQU-020
    €29.00 €44.00
    inc. VAT

     LOW STOCK
  • Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition.
    Fits RJX helicopters, also can fit Align and other models 600-700 size.
    Comes with metal adapters.
    SKU: UP61066
    €34.00
    inc. VAT

     IN STOCK
  • Clutch Liner Material - 180x12mm (4pcs)

    Clutch Liner Material - 180x12mm (4pcs)

    Made from Aftermarket High Density material , fits All clutch systems in thickness of 1 or 1.5mm
    4 pieces of 180x12mm

    Why do i need aftermarket material?

    The material used in today systems as Align, and others is very thin, around 0.8-1mm.

    After seen a lot of clutches broken in the air, we came with aftermarket material.
    The main reason for those breaking clutches is the distance between the clutch and the material.
    Example, the diameter of clutch( metal ) is 53mm, and the liner installed is 54. 1mm is free space allow the clutch to expand.
    Every technical person knows that the material which clutch made from is spring metal which expand  with turning, but it is very limited, and can expand to 0.3-0.5mm  if more space exist, the clutch risk to break.

    So if you need to change the liner, use thicker material and do the following:

    Measure the clutch and the clutch bell, lets assume the clutch is 53mm, and the bell is 56.
    If you put 1mm, it will be 54mm, so 1mm too much space- risk to break.
    If you use 1.5mm, its better, however the clutch will be tight to insert,
    In this case prepare the liner, and put manually into the clutch bell, if the clutch doesn’t go inside, please take it out and with the help of sandpaper 80-120, sand little for all the length and do the fit again.
    You need to come to the point when the clutch will enter with a little force, and will show like it turns not easy.. but still turns. At this stage, glue all and make the fit test, if needed, sand the material inside the bell .

    The result- after you start the heli first time, the clutch will show difficulty to turn, but after 2-3 flight it will “find it way” and it will have perfect fit. And it will last for very long time.

    SKU: SKU4053
    €10.00 €15.00
    inc. VAT

     IN STOCK
  • CNC elevator links

    CNC elevator links

    Set of 2 CNC elevator links, Anodized in Silver

    SKU: SKU40617
    €13.00
    inc. VAT

  • Collective Unit CNC Raptor

    Collective Unit CNC Raptor

    Raptor replacement collective unit, all cnc with Ball bearing support, Zero Slope.

    Available in Blue, Silver and Black colors.

    SKU: HTPV0068
    €37.00 €43.00
    inc. VAT

     LOW STOCK
  • Crisp Dampners

    Crisp Dampners

    3D flat Dmper, Complete set.
    set comes with special o'rings, 85 duro

    SKU: RCM16210
    €12.00
    inc. VAT

     LOW STOCK
  • Evo tail servo mount set

    Evo tail servo mount set

    CNC tail servo mount set for Raptor /TZ 30-50

    SKU: HTPV1004
    €18.00
    inc. VAT

     IN STOCK
  • Flybar 30-50

    Flybar 30-50

    Made from precision ground steel for excellent strength and corrosion resistance. Those flybars can help to improve hover stability for novice flyers.3mm FLYBAR, Set of 1 flybar
    SKU: SKU14551
    €3.00
    inc. VAT

  • Frame Spacer Set - R6F-04-S

    Frame Spacer Set - R6F-04-S

    Raptor & TZ 60-90

    A set of 4 alloy frame braces / spacers to replace the original plastic items between the upper and lower frames.

    Lightened with styling slots and very rigid to allow frame retaining screws to be fully tightened without fear of distortion. The enlarged mounting surface area ensures a very rigid assembly and helps to reduce flex between the upper and lower mast bearing positions.

    SKU: RCM16340
    €49.00
    inc. VAT

     IN STOCK
  • Frames posts set R30-50

    Frames posts set R30-50

    Frames posts set R30-50

    SKU: SKU14176
    €9.00
    inc. VAT

     IN STOCK
  • Front Guide Pulleys

    Front Guide Pulleys

    RAPTOR 30/50 - V1 & V2 Superb CNC machined lightweight alloy guide pulleys offering superior smooth running and durability. A direct replacement for the original plastic moulded pulleys. Supplied as a pair

    SKU: RCQU-022
    €28.00 €31.00
    inc. VAT

     LOW STOCK
  • Heavy Duty Autorotation clutch

    Heavy Duty Autorotation clutch

    Heavy Duty Autorotation clutch with improoved one way bearing. Lighter construction .
    SKU: R0019R
    €19.00
    inc. VAT

     IN STOCK
  • Heavy Duty Clutch 30-50

    Heavy Duty Clutch 30-50

    RAPTOR 30/50 - V2 & TITAN , TZ30-50

    This clutch is a direct replacement for the original Raptor unit. The hinge points have been extended to provide a more progressive drive take up and to reduce the chances of stress fractures. Supplied complete with one-way bearing.

    SKU: RX50D-11
    €29.00 €37.00
    inc. VAT

     IN STOCK
  • Heavy Duty Clutch 90

    Heavy Duty Clutch 90

    This clutch is a direct replacement for the original Raptor unit. The hinge points have been extended to provide a more progressive drive take up and to reduce the chances of stress fractures. Supplied complete with one-way bearing.

    Fit Raptor 90

    SKU: R6D-11
    €35.00
    inc. VAT

     IN STOCK
  • Heavy duty clutch bell R30-50

    Heavy duty clutch bell R30-50

    Color Gold with extra holes for better cooling

    SKU: SKU14175
    €29.00
    inc. VAT

  • Link Rod coupler

    Link Rod coupler

    Use to attach long pushrods to each other
    SKU: KRW117
    €3.00
    inc. VAT

     IN STOCK
  • Logo 480-690 Tail Grip Assembly

    Logo 480-690 Tail Grip Assembly

    Alloy tail grip set complete with high strength stainless steel hub, pre-assembled with twin precision radial ballraces and thrust bearing in each grip for smooth movement and safety at high rpm..
     
    Supplied complete with blade grip washers and plain shank mounting bolts. Designed to suit tail blades with a nominal 5mm root thickness.

    Total weight including blade washers and bolts - 32.80 g

    Supplied complete with new pitch yoke assembly.

    SKU: ML6T-11
    €58.00
    inc. VAT

     72HR STOCK
  • M3 Control Ball - 6mm Long

    M3 Control Ball - 6mm Long

    Stainless steel control balls /Studs with M3 thread (3/6 mm long) and 2.0mm internal hexagon drive

    Ball centre to mounting face distance = 6mm

    Supplied in a pack of 5 pieces

    SKU: QUKHP-026
    €5.00
    inc. VAT

     IN STOCK
  • M3 Control Ball - Long thread

    M3 Control Ball - Long thread

    Stainless steel control balls /Studs with M3 thread (3/6 mm long) and 2.0mm internal hexagon drive

    Ball centre to mounting face distance = 6mm

    Supplied in a pack of 5 pieces

    SKU: QUKHP-036
    €5.00
    inc. VAT

     LOW STOCK
  • M3 x 10 Button Head Frame Screws

    M3 x 10 Button Head Frame Screws

     Lynx Heli Innovations -M3 x 10 Button Head Frame Screws x 45 pcs- LX0073

    OEM Lynx production - With larger head which eliminates need for washer, making stronger frame assembly. (Can be used in all carbon frame helis)

    SKU: LX0073
    €22.99
    inc. VAT

     LOW STOCK

Manufacturers

Back