Upgrades Blade Helis

Upgrades Blade Helis

Aftermarket upgrades and tuning for Blade helicopters

Products


  • CNC AL Swash Leveler (Red) - Blade 180 CFX

    CNC AL Swash Leveler (Red) - Blade 180 CFX

    Description:

    • This tool is designed to level your swashplate. Adjust 3 swash linkage lengths or trim till you can't see any space at either of the 3 points of contact. This ensure that the swash perpendicular to the main shaft at neutral position.

    Usage:

    • Use for Blade 180 CFX.

    Included:

    • CNC AL Swash Leveler (1pcs).


     

    SKU: 180CFXT01-R
    €9.50
    inc. VAT

     LOW STOCK
  • CNC AL Tail Boom Clamp Set (Red) - Blade 180 CFX

    CNC AL Tail Boom Clamp Set (Red) - Blade 180 CFX

    Description:

    • Precision CNC Aluminum Tail Boom Clamp and Delrin Tail Push Rod Guide combine are designed to keep stronger than Stock, replacement easily and support the Tail Push Rod better.
    • Compatible and replacement the Stock.
    • Optimized for weight and durability.

    Usage:

    • Use for Blade 180 CFX.

    Weight:

    • Stock Plastic Tail Boom Clamp Set: 0.56(g) = 0.019(oz).
    • CNC AL Tail Boom Clamp Set: 0.81(g) = 0.028(oz).

    Included:

    • CNC AL Tail Boom Clamp (1set).


     

    SKU: 180CFX816-R
    €12.00
    inc. VAT

     IN STOCK
  • CNC AL Tail Boom Mount Set (Black) - Blade 180 CFX

    CNC AL Tail Boom Mount Set (Black) - Blade 180 CFX

    CNC AL Tail Boom Mount (1set).

    CNC AL Tail Boom Mount (1set)

    1. Description:

    • - Precision CNC Aluminum Tail Boom Mount Set.
    • - Stainless Steel Cap Screw and Steel High Quality Radial Bearing.
    • - Optimized for light weight and maximum rigidity, stability and durability.
    • - Assembly with the Main Frame, Tail Boom and Tail Servo easily.
    • - Compatible and replacement the Stock.

    2. Usage:

    • - Use for Blade 180 CFX.

    3. Weight:

    • - Stock Tail Boom Mount Set: 8.20(g) = 0.29(oz).
    • - RKH's Tail Boom Mount Set: 7.75(g) = 0.27(oz). Lighter weight than Stock: 0.45(g) = 0.02(oz).

    4. Included:
     

     

    SKU: 180CFX613-K
    €31.00
    inc. VAT

     LOW STOCK
  • CNC AL Tail Push Rod Guide Set (Red) - Blade 180 CFX

    CNC AL Tail Push Rod Guide Set (Red) - Blade 180 CFX

    Description:

    • Precision CNC Aluminum and Delrin combine Tail Push Rod Guide Set are designed to keep stronger than Stock, replacement easily and support the Tail Push Rod better.
    • Compatible and replacement the Stock.
    • Optimized for weight and durability.

    Usage:

    • Use for Blade 180 CFX.

    Weight:

    • Stock Plastic Tail Push Rod Guide Set: 0.30(g) = 0.010(oz).
    • CNC AL Tail Push Rod Guide Set: 0.85(g) = 0.029(oz).

    Includes:

    • CNC AL Tail Push Rod Guide (2 sets).

     

    SKU: 180CFX827-R
    €9.50
    inc. VAT

     IN STOCK
  • CNC AL Tail Servo Mount Set (Red) - Blade 180 CFX

    CNC AL Tail Servo Mount Set (Red) - Blade 180 CFX

    Description:
    • Precision CNC Aluminum Tail Servo Mount and Stainless Steel Cap Screw.
    • Compatible and replacement the Stock.
    • Optimized for weight and durability.
    Usage:
    • Use for Blade 180 CFX.
    Includes:
    • CNC AL Tail Servo Mount (1set).

     

    SKU: 180CFX806-R
    €12.00
    inc. VAT

     IN STOCK
  • CNC Aluminium Canopy Mount Set (Red) - Blade 180 CFX

    CNC Aluminium Canopy Mount Set (Red) - Blade 180 CFX

    Description:
    • Precision CNC Aluminum Tail Boom Clamp and Delrin Tail Push Rod Guide combine are designed to keep stronger than Stock, replacement easily and support the Tail Push Rod better.
    • Compatible and replacement the Stock.
    • Optimized for weight and durability.
    Usage:
    • Use for Blade 180 CFX.
    Weight:
    • Stock Plastic Tail Boom Clamp Set: 0.56(g) = 0.019(oz).
    • CNC AL Tail Boom Clamp Set: 0.81(g) = 0.028(oz).
    Included:
    • CNC AL Tail Boom Clamp (1set).


     

    SKU: 180CFX799-R
    €7.50
    inc. VAT

     IN STOCK
  • CNC Aluminium Head Combo for Blade 200 SRX (Red)

    CNC Aluminium Head Combo for Blade 200 SRX (Red)

    CNC AL Head Combo 01 (Red) - Blade 200SRX
    • The CNC Aluminum Main Rotor Hub and CNC Hardened Steel Spindle Shaft.
    • The CNC Aluminum Main Blade Grips used high quality bearings for being more precision in control.
    • All optimized for weight and durability.
    Use for Blade 200SRX.

    Weight:
    • Stock Plastic Head Combo: 5.60(g) = 0.18(oz).
    • CNC Aluminum Head Combo: 5.37(g) = 0.17(oz). Lighter weight than Stock: 0.23(g) = 0.01(oz).
    Included:
    • 1 x (SKU: 200SRX007) CNC Hardened Steel Spindle Shaft Set
    • 1 x (SKU: 200SRX010) CNC AL Main Rotor Hub Set
    • 1 x (SKU: 200SRX030) CNC AL Main Blade Grip Set

    SKU: RKH-200SRX011-R
    €43.00
    inc. VAT

     IN STOCK
  • CNC Aluminium Lower Main Shaft Bearing Block Set (Red) - Blade 180 CFX

    CNC Aluminium Lower Main Shaft Bearing Block Set (Red) - Blade 180 CFX

    Description:
    • Precision CNC AL Lower Main Shaft Bearing Block.
    • Stainless Steel Cap Screw and Steel High Quality Radial Bearing.
    • Compatible and replacement the Stock.
    • Optimized for weight and durability.
    Usage:
    • Use for Blade 180 CFX.
    Weight:
    • Stock AL Lower Main Shaft Bearing Block Set: 2.75(g) = 0.097(oz).
    • RKH's CNC AL Lower Main Shaft Bearing Block Set: 2.47(g) = 0.087(oz).
    Includes:
    • CNC AL Lower Main Shaft Bearing Block (1set).
    SKU: 180CFX422-R
    €10.00
    inc. VAT

     LOW STOCK
  • CNC Aluminium Main Motor Mount Set (Red) - Blade 200SRX

    CNC Aluminium Main Motor Mount Set (Red) - Blade 200SRX

    • Precision CNC Aluminum Main Motor Mount.
    • Adjustable Motor to get the best geamesh.
    • Can use with RKH's CNC Delrin 104T Main Gear (SKU: 200SRX305).
    • Compatible and replacement Stock.
    • Optimized for weight and durability.

    Use for Blade 200SRX.

    Weight:

    • Stock AL Main Motor Mount Set: 4.37(g) = 0.14(oz).
    • CNC AL Main Motor Mount Set: 4.20(g) = 0.13(oz). Lighter weight than Stock: 0.17(g) = 0.01(oz).

    CNC AL Main Motor Mount (1set).

    Hardware: 2.2x4.0x0.5mm Washer (4p

    SKU: RKH-200SRX601-R
    €7.57
    inc. VAT

     LOW STOCK
  • CNC Aluminium Swashplate Set (Red) - Blade 180 CFX

    CNC Aluminium Swashplate Set (Red) - Blade 180 CFX

    Description:
    • Precision CNC Aluminum Swashplate and Stainless Steel Linkage Balls to get more strength.
    • The rear Swashplate Arm is designed to put the Linkage Rod in/out easily.
    • Used high quality bearing to decrease slop and get more precise in control.
    • Increase the swashplate tilting angle ability up to 21.25 degrees.
    • Get precision and more power on cyclic control.
    • All optimized for weight and durability.
    Usage:
    • Use for Blade 180 CFX.
    Weight:
    • Stock Plastic Swashplate Set: 2.58(g) = 0.09(oz).
    • CNC Aluminum Swashplate Set: 3.01(g) = 0.10(oz).
    Includes:
    • CNC AL Swashplate (1set).


     

    SKU: 180CFX178-R
    €25.50
    inc. VAT

     IN STOCK
  • CNC Aluminum Main Blade Grip

    CNC Aluminum Main Blade Grip

    The Precision CNC Aluminum Main Blade Grip set is designed to improve stability, durability and performance on the helicopter. It's directly replaced the stock plastic main grip. The Precision CNC Aluminum Main Blade Grip set is machined with high tolerance from aircraft aluminum to achieve the best possible precision and using triple non-shield type ball bearing for the Aluminum Main Blade Grips to avoid stripping and to perform efficiently under high RPM and 3D maneuver condition On mcpx flybarless head system. And yet, the Aluminum Main Blade Grip design allows pilot to set damping from soft to hard to fit your best flying style. Threaded steel ball join is also used to prevent wear and tear for long time use. More than that, the Precision CNC Aluminum Main Blade Grip set is very light weight 0.12gram lighter than stock plastic grip while equipped with triple ball bearing and threaded steel ball join. The Aluminum Main Blade Grip design will bring the best performance and the best look to your helicopter.

    Includes
    •    2 x Precision CNC Aluminum Main Blade Grip
    •    6 x Non-Shield Ball Bearing
    •    2 x Damper Spacer (Soft)
    •    2 x Damper Spacer (Hard)
    •    2 x Threaded Steel Ball Join
    •    Hardware
    SKU: MCPX001-S
    €25.00
    inc. VAT

     LOW STOCK
  • CNC Carbon Steel Main Shaft BLADE 180CFX by Lynx heli

    CNC Carbon Steel Main Shaft BLADE 180CFX by Lynx heli

    Using the finest precision, high quality CNC finish, Lynx has produced our hardened carbon steel main shaft for the 180CFX.
    The choice to use C40 carbon steel heat-treated to 50 Rockwell Hardness was used to achieve the highest strength.  This Carbon Steel has been tested in our spindles and because of its added hardness it can withstand minor crashes without damage or bending.
    Lynx aims to fulfill all high performance needs for your 180CFX, without compromise, offering more choices to meet your preference:
    Carbon steel for highest strength/stiffness
    Carbon fiber for the ultimate lightweight
    Titanium for best ratio of strength and weight.

    FEATURES:

    • Precise tolerances eliminate vibrations and increase fine control feeling.
    • Direct replacement for standard 180CFX main shaft.
    • Final Elements Analysis used to achieve the lightest weight and maximum strength.

    SPECIFICATION

    • Shaft material: C40 Carbon Steel, heat-treated to 50 Rockwell Hardness.
    • Collar material: Stainless Steel
    • Assembly weight: 7g

    PACKING LIST:

    • 1 x 180CFX Carbon Steel Main Shaft
    • 1 x 180CFX Main Shaft Collar
    • 1 x Hex Cup Screw M1.6x5 Hex Socket 1.5
    • 1 x Hex Cup Screw M1.6x10 Hex Socket 1.5
    SKU: LX1394
    €9.70
    inc. VAT

     IN STOCK
  • CNC Carbon Steel Spindle shaft BLADE 180CFX by Lynx heli

    CNC Carbon Steel Spindle shaft BLADE 180CFX by Lynx heli

    Lynx Heli Innovations is always looking for a better way of doing things.
    Using the finest precision high quality CNC finish, Lynx has produced a Carbon Steel HRC 40 special edition spindle shaft for 180CFX.
    We chose Carbon Steel HRC 40 to achieve the best strength without any compromise.
    Lynx knows that 180CFX is a high performance helicopter, requiring some serious spindle shaft specifications.
    Small details make an important difference.
    This spindle shaft will be a perfect fit in your 180CFX.
    We sale the spindle in combo with Lynx 180CFX ultra dampeners to assure the best performance.

    TECHNICAL SPECIFICATION:

    • Bushing Material: Techno-Polymer base POM
    • Shims Washer: Brass
    • Spindle shaft material: Carbon Steel HRC 40
    • Hardware : Carbon Steel 12.9 Class DIN 912

    PACKING LIST:

    • 1 x 180CFX Carbon Steel spindle shaft
    • 2 x Washer 1.6x3.5x0.4
    • 2 x Hex Cup Screw M1.6x5 Hex socket M1.5
    • 2 x 180CFX Ultra Dampeners
    • 6 x Fine Adjustment Shims Washer
    SKU: LX1384
    €6.90
    inc. VAT

     72HR STOCK
  • CNC CF Tail Fin Set (Black-Red) Blade 180 CFX

    CNC CF Tail Fin Set (Black-Red) Blade 180 CFX

    CNC CF Tail Fin Set (Black-Red) Blade 180 CFX

    CNC Carbon Fiber:
     

    • Compatible with Plastic and Aluminum Tail Gear Case.
    • Optimized for weight and durability.

    Weight:
     

    • Stock Plastic Tail Fin Set: 1.12(g) = 0.039(oz).
    • CNC CF Tail Fin Set: 1.06(g) = 0.037(oz). Lighter weight than Stock.

    * Hardware:
     

    • (SKU: 225005W-10) 2.2x5.0x0.5mm Steel Washer (1pcs).
    • (SKU: M1.6x4PH-10) M1.6x4mm Pan Head Screw (1pcs).
    • (SKU: M1.6x4SPH-10) M1.6x4mm Self Tapping Pan Head Screw (1pcs).

    Use for Blade 180 CFX.

    SKU: RKH-180CFX854-BR
    €6.50
    inc. VAT

     IN STOCK
  • CNC Delrin 104T Main Gear w/AL Hub Set (Red) - Blade 180 CFX

    CNC Delrin 104T Main Gear w/AL Hub Set (Red) - Blade 180 CFX

    Description:
    • Precision CNC Aluminum Hub and 104T 0.4M Delrin Main Gear.
    • Compatible and replacement Stock Plastic Main Gear.
    • Optimized for weight and durability.
    Usage:
    • Use for Blade 180 CFX.
    Weight:
    • Stock Plastic Main Gear Set: 2.82(g) = 0.10(oz).
    • CNC Delrin 104T Main Gear w/AL Hub Set: 3.97(g) = 0.14(oz).
    Includes:
    • CNC Delrin 104T Main Gear w/AL Hub (1set).


     

    SKU: 180CFX303-R
    €18.90
    inc. VAT

     IN STOCK
  • CNC Delrin TPS Linkage Set - Blade 130X

    CNC Delrin TPS Linkage Set - Blade 130X

     Spare parts for  Advanced Tail Combo (130X869).
    - Optimized for weight and durability.

    Included:
    - CNC Delrin TPS Linkage (1set).

    SKU: RKH-130X898
    €4.27
    inc. VAT

     IN STOCK
  • CNC Hardened Steel Tail Shaft/Hub

    CNC Hardened Steel Tail Shaft/Hub

    The CNC Hardened Steel Tail Shaft/Hub set is designed with lock pin to improve stability, durability and overall tail performance on the Blade 130 X helicopter.

    SKU: B130X07-X
    €9.50
    inc. VAT

     IN STOCK
  • CNC Landing Gear and Tail Fin Combo (Black-Red) - Blade 200SRX

    CNC Landing Gear and Tail Fin Combo (Black-Red) - Blade 200SRX

     CNC Landing Gear and Tail Fin Combo (Black-Red) - Blade 200SRX

    • Precision CNC Aluminum and Carbon Fiber material.
    • Style with decals.
    • Compatible and replacement Stock.
    • The CNC Aluminum Horizontal Stabilizer Fin Mount is designed to keep increase grip and reduced vibration.
    • Lighter weight than Stock Combo: 0.57(g)

    Use for Blade 200SRX.
    Included:

    • 1 x (SKU: 200SRX721-) CNC Landing Gear Set
    • 1 x (SKU: 200SRX816) CNC AL Horizontal Stabilizer Fin Mount Set
    • 1 x (SKU: 200SRX854-) CNC Tail Fin Set
    SKU: RKH-200SRX999-BR
    €34.90
    inc. VAT

     IN STOCK
  • CNC Landing Gear Set (Black-Red) - Blade 180 CFX

    CNC Landing Gear Set (Black-Red) - Blade 180 CFX

    Description:

    • Precision CNC Aluminum and Carbon Fiber.
    • Style with decals.
    • Optimized for weight and durability.

    Usage:

    • Use for Blade 180 CFX.

    Weight:

    • Stock Plastic Landing Gear: 2.42(g) = 0.085(oz).
    • CNC Landing Gear Set: 4.20(g) = 0.148(oz).

    Includes:

    • CNC Landing Gear (1set).

    Hardware:

    • (SKU: 225005W-10) 2.2x5.0x0.5mm Steel Washer (4pcs).
    • (SKU: M1.6x4PH-10) M1.6x4mm Pan Head Screw (4pcs).

    SKU: 180CFX721-BR
    €20.90
    inc. VAT

     IN STOCK
  • CNC Landing Gear Set (Black-Red) Blade 200SRX/S

    CNC Landing Gear Set (Black-Red) Blade 200SRX/S

    CNC Landing Gear Set (Black-Red) Blade 200SRX/S

    Description:
    Material: Aluminum alloy and 3K Pure Carbon Fiber.
    Hardware: Steel and Stainless Steel.
    Style with decals.
    Optimized for weight and durability.

    :
    Use for Blade 200 SRX.
    Use for Blade 200 S.

    Weight:
    Stock Plastic Landing Gear Set: 6.52(g) = 0.209(oz).
    CNC Landing Gear Set: 6.35(g) = 0.204(oz). Lighter weight than Stock: 0.17(g) = 0.005(oz).

    Package Included:
    CNC Landing Gear (1set).

    •  
    SKU: RKH-200SRX721-BR
    €21.90
    inc. VAT

     LOW STOCK
  • CNC Main Gear Set - Red Hub BLADE 180CFX by Lynx heli

    CNC Main Gear Set - Red Hub BLADE 180CFX by Lynx heli

    Lynx Heli Innovations redesign a 180CFX Main Gear Hub that supports Lynx CNC Main Gear.
    This option is dedicated to pilot who needs a super precise and reinforced CNC Main gear keeping the lightweight as possible and doesn’t need an autorotation system.
    Smooth power transmission and Heavy Duty specification will support your 180CFX need to next level.
    We spent time optimizing the design and fly testing to achieve the required strength and resistance with final design without compromise.
    We are pilots, and we demand a Heli that can support any over-stress fly condition.

    FEATURES:

    • Direct replacement of standard 180CFX main gear, useable with standard or upgraded main shaft.
    • Techno polymer Precise and reinforced CNC main gear assures best wear resistance and perfect tooth mesh.
    • Super precise Main gear concentricity for smooth and silent power transmission
    • Reinforced Main gear for the ultimate main gear rigidity and special cut design to increase crash impact resistance.
    • FEA (Finite Elements Analysis) assisted, achieve lightweight and maximum strength.

    TECHNICAL SPECIFICATION:

    • Main Gear Hub Material: Aluminum 7075-T6 Anodized
    • Main Gear Material: Techno polymer based POM

    PACKING LIST:

    1 x 180CFX CNC Main Gear assembled with Main Gear Hub Red

    SKU: LX1435
    €20.99
    inc. VAT

     IN STOCK
  • CNC Solid Carbon Main Shaft w/AL Collar Set (Red) - Blade 180 CFX

    CNC Solid Carbon Main Shaft w/AL Collar Set (Red) - Blade 180 CFX

    Description:
    • Precision CNC Solid Carbon and Aluminum Collar Main Shaft .
    • Compatible and replacement Stock.
    • Optimized for weight and durability.
    Usage:
    • Use for Blade 180 CFX.
    Weight:
    • Stock Main Shaft: 6.61(g) = 0.23(oz).
    • CNC Solid Carbon Main Shaft w/AL Collar: 1.61(g) = 0.056(oz).
    Included:
    • CNC Solid Carbon Main Shaft w/AL Collar (1set).


     

    SKU: 180CFX400-R
    €6.50
    inc. VAT

     IN STOCK
  • Composite Canopy 130x style LOGO

    Composite Canopy 130x style LOGO

    Fusuno offers a very affordable price, beautiful and high quality canopies at very attractive price. This is the completely new shape canopy which is constructed of high quality new Composite. This canopy is specifically designed to fit well on the 130x

    SKU: FUC-130LG01
    €21.00
    inc. VAT

     LOW STOCK
  • Fiberglass airbrushed Canopy for Blade 200 SRX Schema 01

    Fiberglass airbrushed Canopy for Blade 200 SRX Schema 01

    Airbrush painted canopy, made from Fiberglass material.
    Optimized for weight and durability.

    • Use for Blade 200SRX.
    • Weight: 12.00(g) - 12.90(g)

    Included:
    Canopy Standard Shape-Schema 01 (1set).

    SKU: RKH-200SRX-CS01
    €18.86
    inc. VAT

     LOW STOCK

Manufacturers

Back