Transmitters & Radios

Transmitters & Radios

 Radios and transmitters from Top brands, as Futaba, Spektrum, Hitec and others.

Products


  • Graupner MZ-24 12Ch 2.4GHz HoTT Radio

    Graupner MZ-24 12Ch 2.4GHz HoTT Radio

    The Graupner/SJ MZ-24 puts the HOT in HOTT, leading the way in radio control technology. A beautifully styled radio with a 3.5" user friendly, touch-screen colour display. Fully equipped with a 30 model memory, smart voice announcement, multi-binding system, and advanced HolTT wired or wireless trainer system. With Real Time Data Analysis (with optional sensors), the MZ-24 is a radio you will be proud to own. A 12-channel receiver is included along with a good quality transmitter case.

    Features of the Graupner/SJ MZ-24 transmitter at a glance: -
    12 Channels
    3.5" colour touch-screen for easy programming
    Smart voice announcement system
    Real-time telemetry data on screen with voice readout
    Wireless and wired trainer system with individual channel allocation
    4000mAh Li-Po battery and charger included

    Combo Content

    • MZ-24 Transmitter
    • 4000Mah Ni-MH Transmitter Battery
    • Mains Charger
    • GR-24L Receiver
    • 4GB SD Card
    • Neck Strap
    • Transmitter Balancer
    • PC Interface Cable
    • Aluminium Transmitter Case
    SKU: GR-S1006EN
    €429.00
    inc. VAT

     72HR STOCK
  • Graupner Radio Control mz-32 HoTT 32 Channels

    Graupner Radio Control mz-32 HoTT 32 Channels

    Graupner has moved into its 3rd generation of computer telemetry radios with the MZ-32. This 4.3-inch TFT color (outdoor friendly) and touch screen transmitter with HoTT protocol offers up 32 proportional channels, 999 model memory, a 9000mAh LiHV battery, Bluetooth and WiFi, redundant dual 2.4GHz modules, and a slew of additional features.

    Sporting the coveted Hall Sensor quad bearing gimbals with 4096 resolution, the MZ-32 delivers smooth and precise gimbal movement with razor sharp control, while 64 assignable digital switches, 12 assignable combination switches, 12 assignable logical switches, and 12 assignable control switches put way too many options at your fingertips.

    Need to hear what is going on? The mz-32 provides endless options to generate almost any type of system or telemetry voice notification depending on the state of your radio such as switch positions, flight phase names, warnings, vario information and endless others.

    The mz-32 starts communicating with you from the moment you turn it on, informing you if a switch or control is in the wrong position for the selected model. No more surprises from collapsing landing gear, runaway motors or wrong gyro settings. The mz-32 can inform you when needed even when you forgot to bring down your landing gear or are about to run out of range or battery. Walks of shame are now a thing of the past!

    With over 600 installed voices and unlimited voice combinations, you can make almost any voice announcements or add as many as you want using our text to speech editor.

    Features:

    • Hall Sensor quad bearing gimbals with 4096 resolutions for smooth and precise control
    • Outdoor friendly 4.3-inch TFT color and touch screen
    • Redundant dual 2.4GHz RF modules
    • Circular polarized patch antenna with adjustable beam angle
    • 9000 mAh LiHV rechargeable battery for up to 10 hours of operation
    • Micro-USB port for charging, data communication, joystick function or mass storage
    • Externally adjustable stick tension and mode selection
    • Internal µSD 16 Gb memory card
    • Built in Wireless and Bluetooth communication
    • DSC socket for external communications (wired buddy box, flight simulators, other)
    • Wireless student teacher operation
    • Wireless firmware update
    • Integrated speaker for voice output and telemetry notifications
    • User configurable DSC and data ports (SUMD, CROSSFIRE and others)
    • User assignable haptic feedback
    • 5 x 3 position switches, 2 x 3 position/toggle switches, 1 x 2 position switch, 4 proportional knobs, 2 x lever controls, 8 assignable digital buttons
    • 6 shortcut control and navigation keys

    Technical Information:

    • Operating voltage neutral [V] : 3,6 - 4,35
    • Width [mm]: 195
    • Display?: Yes
    • Frequency : 2400 - 2483,5
    • All-up weight [g]: 1120
    • Height [mm]: 105
    • HoTT - Technology: Yes
    • Channels: 32
    • Overall length [mm]: 210
    • Modulation: FHSS
    • Range approx. [m] : 5000
    • Transmitter series: mz
    • Transmitter type: Hand
    • Language variant: DE / GB
    • Control function: 32
    • Current consumption [mA]: 480 - 1100
    • Temperature range [°C] : -10 - +55
    • Touch Display: Yes
    SKU: GR-S1024.77
    €999.99
    inc. VAT

     72HR STOCK
  • Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3

    Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3

    Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3

    Tray variant of the top-class RC transmitter of JETI model.
    The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
    The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
    Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

    Jeti DC16 , Mode 2/4, metal Case, Charger, Accessories
    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Features:

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Specifications:

    • Weight [g]     1500
    • Dimensions [mm]     230 x 270 x 40
    • Power Output [mW]     100
    • Number of channels     14
    • Number of controls     20
    • Resolution     4096 steps
    • Telemetry     Yes
    • Operational temperature [°C]     -10 ... 60
    • Operating time [h]     11
    • Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

    Included:

    • JETI DC-16 Transmitter
    • Wall Power Supply 110-230V
    • JETI DC-16 Transmitter Aluminum Case
    • USB PC Cable
    • Installation Hex Key Set (1,5mm; 2mm)
    • Cleaning Cloth
    • Instruction Manuals
    SKU: JDEX-TDC16-NR-M1
    €1149.00
    inc. VAT

  • Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3 Carbon Line

    Jeti DC-16 2.4Ghz Radio Duplex Mode 1/3 Carbon Line

    Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3 Carbon Line

    Tray variant of the top-class RC transmitter of JETI model.
    The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
    The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
    Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

    Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Features:

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Specifications:

    • Weight [g]     1500
    • Dimensions [mm]     230 x 270 x 40
    • Power Output [mW]     100
    • Number of channels     14
    • Number of controls     20
    • Resolution     4096 steps
    • Telemetry     Yes
    • Operational temperature [°C]     -10 ... 60
    • Operating time [h]     11
    • Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

    Included:

    • JETI DC-16 Transmitter
    • Receiver Duplex DR9EX
    • Wall Power Supply 110-230V
    • JETI DC-16 Transmitter Aluminum Case
    • USB PC Cable
    • Installation Hex Key Set (1,5mm; 2mm)
    • Cleaning Cloth
    • Instruction Manuals
    SKU: JDEX-TDC16-CL-M1
    €1350.00
    inc. VAT

     72HR STOCK
  • Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4

    Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4

    Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4

    Tray variant of the top-class RC transmitter of JETI model.
    The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
    The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
    Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

    Jeti DC16 , Mode 2/4, metal Case, Charger, Accessories
    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Features:

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Specifications:

    • Weight [g]     1500
    • Dimensions [mm]     230 x 270 x 40
    • Power Output [mW]     100
    • Number of channels     14
    • Number of controls     20
    • Resolution     4096 steps
    • Telemetry     Yes
    • Operational temperature [°C]     -10 ... 60
    • Operating time [h]     11
    • Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

    Included:

    • JETI DC-16 Transmitter
    • Wall Power Supply 110-230V
    • JETI DC-16 Transmitter Aluminum Case
    • USB PC Cable
    • Installation Hex Key Set (1,5mm; 2mm)
    • Cleaning Cloth
    • Instruction Manuals
    SKU: JDEX-TDC16-NR-M2
    €1149.00
    inc. VAT

  • Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line

    Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line

    Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line

    Tray variant of the top-class RC transmitter of JETI model.
    The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
    The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
    Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

    Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Features:

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Specifications:

    • Weight [g]     1500
    • Dimensions [mm]     230 x 270 x 40
    • Power Output [mW]     100
    • Number of channels     14
    • Number of controls     20
    • Resolution     4096 steps
    • Telemetry     Yes
    • Operational temperature [°C]     -10 ... 60
    • Operating time [h]     11
    • Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

    Included:

    • JETI DC-16 Transmitter
    • Receiver Duplex DR9EX
    • Wall Power Supply 110-230V
    • JETI DC-16 Transmitter Aluminum Case
    • USB PC Cable
    • Installation Hex Key Set (1,5mm; 2mm)
    • Cleaning Cloth
    • Instruction Manuals
    SKU: JDEX-TDC16-CL-M2
    €1350.00
    inc. VAT

     72HR STOCK
  • Jeti DC-16 RED 2.4Ghz Radio Duplex Mode 1/3 Carbon Line

    Jeti DC-16 RED 2.4Ghz Radio Duplex Mode 1/3 Carbon Line

    Jeti DC-16  2.4Ghz Radio Duplex Mode 1/3 Carbon Line RED

    Tray variant of the top-class RC transmitter of JETI model.
    The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
    The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
    Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

    Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Features:

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Specifications:

    • Weight [g]     1500
    • Dimensions [mm]     230 x 270 x 40
    • Power Output [mW]     100
    • Number of channels     14
    • Number of controls     20
    • Resolution     4096 steps
    • Telemetry     Yes
    • Operational temperature [°C]     -10 ... 60
    • Operating time [h]     11
    • Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

    Included:

    • JETI DC-16 Transmitter
    • Receiver Duplex DR9EX
    • Wall Power Supply 110-230V
    • JETI DC-16 Transmitter Aluminum Case
    • USB PC Cable
    • Installation Hex Key Set (1,5mm; 2mm)
    • Cleaning Cloth
    • Instruction Manuals
    SKU: JDEX-TDC16-CLR-M1
    €1400.00
    inc. VAT

     72HR STOCK
  • Jeti DC-16 RED 2.4Ghz Radio Duplex Mode 2/4 Carbon Line

    Jeti DC-16 RED 2.4Ghz Radio Duplex Mode 2/4 Carbon Line

    Jeti DC-16 2.4Ghz Radio Duplex Mode 2/4 Carbon Line RED

    Tray variant of the top-class RC transmitter of JETI model.
    The transmitters DC-16 and DS-16 came to existence under cooperation of professional pilots and world champions. They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts.
    The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
    Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

    Jeti DC16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories
    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.
    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).
    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Features:

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Specifications:

    • Weight [g]     1500
    • Dimensions [mm]     230 x 270 x 40
    • Power Output [mW]     100
    • Number of channels     14
    • Number of controls     20
    • Resolution     4096 steps
    • Telemetry     Yes
    • Operational temperature [°C]     -10 ... 60
    • Operating time [h]     11
    • Compatible protocols     DUPLEX 2.4GHz EX, EX Bus

    Included:

    • JETI DC-16 Transmitter
    • Receiver Duplex DR9EX
    • Wall Power Supply 110-230V
    • JETI DC-16 Transmitter Aluminum Case
    • USB PC Cable
    • Installation Hex Key Set (1,5mm; 2mm)
    • Cleaning Cloth
    • Instruction Manuals
    SKU: JDEX-TDC16-CLR-M2
    €1400.00
    inc. VAT

     72HR STOCK
  • Jeti DC-24 transmitter tray carboxylic line dark orange Multimode

    Jeti DC-24 transmitter tray carboxylic line dark orange Multimode

    Jeti DC-24 transmitter tray carboxylic line dark orange Multimode

    Hardware:

    • Clear, timeless form
    • Precision production in the EU
    • Metal housing
    • Versatile adjustable joystick
    • Trouble-free installation of stick switches
    • Fast, precise stick reactions
    • Backlit display
    • Color display even in direct sunlight easy to read
    • Mechanically protected antenna positioning
    • Durable LiIon battery for long term use and low self-discharge
    • Integrated charging electronics for the transmitter battery
    • Charging option via USB
    • Headphone connector
    • built-in microphone
    • 2 HF modules 2.4GHz
    • 4 antennas
    • 1 RF module 900 MHz
    • USB connectivity to a computer
    • Data storage
    • Internal PPM
    • In / out slot
    • Approximately Wireless internal structure
    • FM Radio
    • Vibrating alert

    Software:

    • Up to 24 channels proportional
    • Digital trims
    • Minimum latency
    • Power management for maximum battery life
    • Firmware updates easily via USB
    • Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
    • Time display
    • Speech output for alarms and telemetry values
    • Clear display of Channel Set
    • Simple and logical programming
    • mMltilingual
    • Audio Player (MP3)

    Telemetry:

    • Display of telemetry data on the screen in real time
    • Recording of telemetry data
    • Bidirectional communication via EX protocol and EX bus
    • Graphical representation of the telemetry data directly on the display
    • Telemetry transmitter

    Set contains:

    • DC-24
    • Alu case
    • 900 MHz R.sub.sat
    • Power supply
    • USB cable
    • Cross strap

     

    SKU: JDEX-TDC24-CLDO
    €1790.00
    inc. VAT

     72HR STOCK
  • Jeti DC-24 transmitter tray carboxylic line dark red Multimode

    Jeti DC-24 transmitter tray carboxylic line dark red Multimode

    Jeti DC-24 transmitter tray carboxylic line dark red Multimode

    Hardware:

    • Clear, timeless form
    • Precision production in the EU
    • Metal housing
    • Versatile adjustable joystick
    • Trouble-free installation of stick switches
    • Fast, precise stick reactions
    • Backlit display
    • Color display even in direct sunlight easy to read
    • Mechanically protected antenna positioning
    • Durable LiIon battery for long term use and low self-discharge
    • Integrated charging electronics for the transmitter battery
    • Charging option via USB
    • Headphone connector
    • built-in microphone
    • 2 HF modules 2.4GHz
    • 4 antennas
    • 1 RF module 900 MHz
    • USB connectivity to a computer
    • Data storage
    • Internal PPM
    • In / out slot
    • Approximately Wireless internal structure
    • FM Radio
    • Vibrating alert

    Software:

    • Up to 24 channels proportional
    • Digital trims
    • Minimum latency
    • Power management for maximum battery life
    • Firmware updates easily via USB
    • Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
    • Time display
    • Speech output for alarms and telemetry values
    • Clear display of Channel Set
    • Simple and logical programming
    • mMltilingual
    • Audio Player (MP3)

    Telemetry:

    • Display of telemetry data on the screen in real time
    • Recording of telemetry data
    • Bidirectional communication via EX protocol and EX bus
    • Graphical representation of the telemetry data directly on the display
    • Telemetry transmitter

    Set contains:

    • DC-24
    • Alu case
    • 900 MHz R.sub.sat
    • Power supply
    • USB cable
    • Cross strap

     

    SKU: JDEX-TDC24-CLDR
    €1790.00
    inc. VAT

     72HR STOCK
  • Jeti DC-24 transmitter tray carboxylic line light blue Multimode

    Jeti DC-24 transmitter tray carboxylic line light blue Multimode

    Jeti DC-24 transmitter tray carboxylic line light blue Multimode

    Hardware:

    • Clear, timeless form
    • Precision production in the EU
    • Metal housing
    • Versatile adjustable joystick
    • Trouble-free installation of stick switches
    • Fast, precise stick reactions
    • Backlit display
    • Color display even in direct sunlight easy to read
    • Mechanically protected antenna positioning
    • Durable LiIon battery for long term use and low self-discharge
    • Integrated charging electronics for the transmitter battery
    • Charging option via USB
    • Headphone connector
    • built-in microphone
    • 2 HF modules 2.4GHz
    • 4 antennas
    • 1 RF module 900 MHz
    • USB connectivity to a computer
    • Data storage
    • Internal PPM
    • In / out slot
    • Approximately Wireless internal structure
    • FM Radio
    • Vibrating alert

    Software:

    • Up to 24 channels proportional
    • Digital trims
    • Minimum latency
    • Power management for maximum battery life
    • Firmware updates easily via USB
    • Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
    • Time display
    • Speech output for alarms and telemetry values
    • Clear display of Channel Set
    • Simple and logical programming
    • mMltilingual
    • Audio Player (MP3)

    Telemetry:

    • Display of telemetry data on the screen in real time
    • Recording of telemetry data
    • Bidirectional communication via EX protocol and EX bus
    • Graphical representation of the telemetry data directly on the display
    • Telemetry transmitter

    Set contains:

    • DC-24
    • Alu case
    • 900 MHz R.sub.sat
    • Power supply
    • USB cable
    • Cross strap

     

    SKU: JDEX-TDC24-CLLB
    €1790.00
    inc. VAT

     72HR STOCK
  • Jeti DC-24 transmitter tray carboxylic line Multimode

    Jeti DC-24 transmitter tray carboxylic line Multimode

    Jeti DC-24 transmitter tray carboxylic line Multimodee

    Hardware:

    • Clear, timeless form
    • Precision production in the EU
    • Metal housing
    • Versatile adjustable joystick
    • Trouble-free installation of stick switches
    • Fast, precise stick reactions
    • Backlit display
    • Color display even in direct sunlight easy to read
    • Mechanically protected antenna positioning
    • Durable LiIon battery for long term use and low self-discharge
    • Integrated charging electronics for the transmitter battery
    • Charging option via USB
    • Headphone connector
    • built-in microphone
    • 2 HF modules 2.4GHz
    • 4 antennas
    • 1 RF module 900 MHz
    • USB connectivity to a computer
    • Data storage
    • Internal PPM
    • In / out slot
    • Approximately Wireless internal structure
    • FM Radio
    • Vibrating alert

    Software:

    • Up to 24 channels proportional
    • Digital trims
    • Minimum latency
    • Power management for maximum battery life
    • Firmware updates easily via USB
    • Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
    • Time display
    • Speech output for alarms and telemetry values
    • Clear display of Channel Set
    • Simple and logical programming
    • mMltilingual
    • Audio Player (MP3)

    Telemetry:

    • Display of telemetry data on the screen in real time
    • Recording of telemetry data
    • Bidirectional communication via EX protocol and EX bus
    • Graphical representation of the telemetry data directly on the display
    • Telemetry transmitter

    Set contains:

    • DC-24
    • Alu case
    • 900 MHz R.sub.sat
    • Power supply
    • USB cable
    • Cross strap

     

    SKU: JDEX-TDC24-CL-MM
    €1790.00
    inc. VAT

     72HR STOCK
  • Jeti DC-24 transmitter tray Multimode

    Jeti DC-24 transmitter tray Multimode

    Jeti DC-24 transmitter tray Multimode

    Hardware:

    • Clear, timeless form
    • Precision production in the EU
    • Metal housing
    • Versatile adjustable joystick
    • Trouble-free installation of stick switches
    • Fast, precise stick reactions
    • Backlit display
    • Color display even in direct sunlight easy to read
    • Mechanically protected antenna positioning
    • Durable LiIon battery for long term use and low self-discharge
    • Integrated charging electronics for the transmitter battery
    • Charging option via USB
    • Headphone connector
    • built-in microphone
    • 2 HF modules 2.4GHz
    • 4 antennas
    • 1 RF module 900 MHz
    • USB connectivity to a computer
    • Data storage
    • Internal PPM
    • In / out slot
    • Approximately Wireless internal structure
    • FM Radio
    • Vibrating alert

    Software:

    • Up to 24 channels proportional
    • Digital trims
    • Minimum latency
    • Power management for maximum battery life
    • Firmware updates easily via USB
    • Programming the receiver, sensors, Central boxes and Jeti Brushless controller directly from the transmitter
    • Time display
    • Speech output for alarms and telemetry values
    • Clear display of Channel Set
    • Simple and logical programming
    • mMltilingual
    • Audio Player (MP3)

    Telemetry:

    • Display of telemetry data on the screen in real time
    • Recording of telemetry data
    • Bidirectional communication via EX protocol and EX bus
    • Graphical representation of the telemetry data directly on the display
    • Telemetry transmitter

    Set contains:

    • DC-24
    • Alu case
    • 900 MHz R.sub.sat
    • Power supply
    • USB cable
    • Cross strap

     

    SKU: JDEX-TDC24-MM2
    €1690.00
    inc. VAT

     72HR STOCK
  • Jeti DS-16 Transmitter 2.4Ghz Radio Duplex Mode 1/3

    Jeti DS-16 Transmitter 2.4Ghz Radio Duplex Mode 1/3

    Jeti DS-16 Transmitter 2.4Ghz Radio Duplex Mode 1/3

    Jeti DS16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories

    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Specifications and Features

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Included:

    • Jeti Duplex DS-16 Transmitter
    • 9 ch RECEIVER
    • Jeti Transmitter Neck Strap
    • Jeti Transmitter Aluminum Case
    • 110-230V Wall Power charger
    • Tx Battery Li-poly 3200mAh 3.7V (1S2P)
    • Mini USB to USB PC Cable
    • Instruction book
    SKU: JDEX-TDS16-NR-M1
    €1499.00
    inc. VAT

  • Jeti DS-16 Transmitter 2.4Ghz Radio Duplex Mode 2/4

    Jeti DS-16 Transmitter 2.4Ghz Radio Duplex Mode 2/4

    Jeti DS-16 Transmitter 2.4Ghz Radio Duplex Mode 2/4

    Jeti DS16 , Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories

    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Specifications and Features

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Included:

    • Jeti Duplex DS-16 Transmitter
    • 9 ch RECEIVER
    • Jeti Transmitter Neck Strap
    • Jeti Transmitter Aluminum Case
    • 110-230V Wall Power charger
    • Tx Battery Li-poly 3200mAh 3.7V (1S2P)
    • Mini USB to USB PC Cable
    • Instruction book
    SKU: JDEX-TDS16-NR-M2
    €1499.00
    inc. VAT

     72HR STOCK
  • Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 1/3

    Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 1/3

    Jeti DS16 carbonline, Mode 1/3 with 9 CH receiver, metal Case, Charger, Accessories

    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Specifications and Features

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Included:

    • Jeti Duplex DS-16 Transmitter
    • 9CH receiver
    • Jeti Transmitter Neck Strap
    • Jeti Transmitter Aluminum Case
    • 110-230V Wall Power charger
    • Tx Battery Li-poly 3200mAh 3.7V (1S2P)
    • Mini USB to USB PC Cable
    • Instruction book
    SKU: JDEX-TDS16-CL-M1
    €1599.00
    inc. VAT

     72HR STOCK
  • Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 1/3 RED edition

    Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 1/3 RED edition

    Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 1/3 RED edition

    Jeti DS16 carbonline, Mode 1/3 with 9 CH receiver, metal Case, Charger, Accessories

    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Specifications and Features

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Included:

    • Jeti Duplex DS-16 Transmitter
    • 9CH receiver
    • Jeti Transmitter Neck Strap
    • Jeti Transmitter Aluminum Case
    • 110-230V Wall Power charger
    • Tx Battery Li-poly 3200mAh 3.7V (1S2P)
    • Mini USB to USB PC Cable
    • Instruction book
    SKU: JDEX-TDS16-CLR-M1
    €1649.00
    inc. VAT

     72HR STOCK
  • Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 2/4

    Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 2/4

    Jeti DS16 carbonline, Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories

    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Specifications and Features

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Included:

    • Jeti Duplex DS-16 Transmitter
    • 9CH receiver
    • Jeti Transmitter Neck Strap
    • Jeti Transmitter Aluminum Case
    • 110-230V Wall Power charger
    • Tx Battery Li-poly 3200mAh 3.7V (1S2P)
    • Mini USB to USB PC Cable
    • Instruction book
    SKU: JDEX-TDS16-CL-M2
    €1599.00
    inc. VAT

     72HR STOCK
  • Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 2/4 RED edition

    Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 2/4 RED edition

    Jeti DS-16 Transmitter Carbonline 2.4Ghz Duplex Mode 2/4 RED edition

    Jeti DS16 carbonline, Mode 2/4 with 9 CH receiver, metal Case, Charger, Accessories

    This revolutionary, digital, 16 Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antenna, a mini USB port, built-in speaker, headset jack, metal transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DC/DS-16s are sure to become the new standard in transmitter performance.

    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Specifications and Features

    State-of-the-art, upgradable firmware which gives you full freedom and complete control.
    Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
    Mini USB port for firmware upgrades and PC download of telemetry data.
    Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
    Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
    9-point, programmable curve mixes for all 16 digital proportional channels.
    You can set up not just dual, but triple rates.
    Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
    Unlimited use of the on-board 2GB SD card memory.
    Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
    Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
    Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
    All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
    Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Included:

    • Jeti Duplex DS-16 Transmitter
    • 9CH receiver
    • Jeti Transmitter Neck Strap
    • Jeti Transmitter Aluminum Case
    • 110-230V Wall Power charger
    • Tx Battery Li-poly 3200mAh 3.7V (1S2P)
    • Mini USB to USB PC Cable
    • Instruction book
    SKU: JDEX-TDS16-CLR-M2
    €1649.00
    inc. VAT

     72HR STOCK
  • Jeti DS-24 hand-held transmitter

    Jeti DS-24 hand-held transmitter

    Jeti DS-24 hand-held transmitter

    Preset to Mode 2

    Hardware:

    • clear, timeless form
    • precision production in the EU
    • metal housing
    • Fully adjustable multimode stick
    • easy installation of stick switches
    • fast, accurate responses stick
    • Backlit display
    • Color display easily even in direct sunlight readable
    • mechanically protected antenna positioning
    • Long-life Li-Ion battery for long life and low self-discharge
    • Integrated charging electronics for the transmitter battery
    • Loading feature via USB
    • Headphone Jack
    • built-in microphone
    • 2 HF modules 2.4GHz  
    • 1 HF module 900 MHz
    • USB connection to your computer
    • data storage
    • Internal PPM in / out slot
    • nearly Wireless internal structure
    • FM radio
    • vibrating alert
    • Encoder on the bottom

    Software:

    • up to 24 channels proportional
    • digital trims
    • minimum latency
    • Power management for maximum battery life
    • Firmware updates easily via USB
    • Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
    • time display
    • Speech output for alarms and telemetry values
    • Clear exposition of the Channel Set
    • simple and logical programming
    • multilingual
    • Audio player (MP3)

    Telemetry:

    • Display of telemetry data on the display in real time
    • Recording of telemetry data
    • Speech telemetry and alarm values
    • Bi-directional communication via EX and EX bus protocol
    • Graphical representation of the telemetry data directly on the display
    • telemetry transmitter

    Delivery:

    • DS-24
    • Alucase
    • 900 MHz Rsat
    • Power supply
    • USB cable
    • Transmitter Neck Strap
    SKU: JDEX-TDS24-MM
    €1999.90
    inc. VAT

     72HR STOCK
  • Jeti DS-24 transmitter carboxylic line

    Jeti DS-24 transmitter carboxylic line

    Jeti DS-24 transmitter carboxylic line

    Preset to Mode 2

    Hardware:

    • clear, timeless form
    • precision production in the EU
    • metal housing
    • Fully adjustable multimode stick
    • easy installation of stick switches
    • fast, accurate responses stick
    • Backlit display
    • Color display easily even in direct sunlight readable
    • mechanically protected antenna positioning
    • Long-life Li-Ion battery for long life and low self-discharge
    • Integrated charging electronics for the transmitter battery
    • Loading feature via USB
    • Headphone Jack
    • built-in microphone
    • 2 HF modules 2.4GHz  
    • 1 HF module 900 MHz
    • USB connection to your computer
    • data storage
    • Internal PPM in / out slot
    • nearly Wireless internal structure
    • FM radio
    • vibrating alert
    • Encoder on the bottom

    Software:

    • up to 24 channels proportional
    • digital trims
    • minimum latency
    • Power management for maximum battery life
    • Firmware updates easily via USB
    • Programming the receiver, sensors, Central boxes and Jeti Brushlesscontroller directly from the transmitter,
    • time display
    • Speech output for alarms and telemetry values
    • Clear exposition of the Channel Set
    • simple and logical programming
    • multilingual
    • Audio player (MP3)

    Telemetry:

    • Display of telemetry data on the display in real time
    • Recording of telemetry data
    • Speech telemetry and alarm values
    • Bi-directional communication via EX and EX bus protocol
    • Graphical representation of the telemetry data directly on the display
    • telemetry transmitter

    Delivery:

    • DS-24
    • Alucase
    • 900 MHz Rsat
    • Power supply
    • USB cable
    • Transmitter Neck Strap
    SKU: JDEX-TDS24-CL-MM
    €2100.00
    inc. VAT

     72HR STOCK
  • Jeti DS-6 Transmitter Radio DuplexEX Mode 1 with Jetibox and Rex6

    Jeti DS-6 Transmitter Radio DuplexEX Mode 1 with Jetibox and Rex6

    Jeti DS-6 Transmitter Radio DuplexEX Mode 1 with Jetibox and Rex6

    DS6 Mode 1 (& 3) Duplex EX with Jetibox and Rex6

    Features:

    • 6 channels 10 model warehouses
    • Dual rate
    • Expo
    • Heli mode
    • Wing mode
    • V Stab mix
    • Delta mix
    • Telemetrie on Jetibox and acoustically on Buzzer

    Set contains:

    • DS6 Duplex EX Transmitter
    • Detachable Jetibox on TX
    • Jeti Rex 6 Duplex EX receiver

    The Telemetriewerte can be read on the attachable Jetibox.
    Alarm values are also adjustable on the JETIbox.
    The bound receivers and sensors can be put on the Jetibox and be programmed.

    SKU: HDEX-TDS6-M1
    €179.00
    inc. VAT

     LOW STOCK
  • Jeti DS-6 Transmitter Radio DuplexEX Mode 2 with Jetibox and Rex6

    Jeti DS-6 Transmitter Radio DuplexEX Mode 2 with Jetibox and Rex6

    Jeti DS-6 Transmitter Radio DuplexEX Mode 2 with Jetibox and Rex6

    DS6 Mode 2 (& 4) Duplex EX with Jetibox and Rex6

    Features:

    • 6 channels 10 model warehouses
    • Dual rate
    • Expo
    • Heli mode
    • Wing mode
    • V Stab mix
    • Delta mix
    • Telemetrie on Jetibox and acoustically on Buzzer

    Set contains:

    • DS6 Duplex EX Transmitter
    • Detachable Jetibox on TX
    • Jeti Rex 6 Duplex EX receiver

    The Telemetriewerte can be read on the attachable Jetibox.
    Alarm values are also adjustable on the JETIbox.
    The bound receivers and sensors can be put on the Jetibox and be programmed.

    SKU: HDEX-TDS6-M2
    €179.00
    inc. VAT

  • Jeti Duplex DS-14 transmitter Multimode preconfigured mode 1/3

    Jeti Duplex DS-14 transmitter Multimode preconfigured mode 1/3

    Jeti Duplex DS-14 transmitter preconfigured mode 1/3

    The DS-14 represents Jeti's new, State-of-the-art, transmitter that sets a new quality standard for the RC Industry with its revolutionary features and brand new plastic Hall Sensor Gimbals. Jeti's final touches and finishes are outstanding. The front panel of the system is made of aluminum with UV stabilized clear coating and the case is made of painted, CNC cut, solid aluminum.

    This revolutionary, digital, 14+8 (22) Channel, 2.4GHz, frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. This is one of the most advanced radio systems on today's market. With their solid CNC aluminum case with a fully integrated antennas, a mini USB port, built-in speaker, headset jack, plastic transmitter gimbals with Hall sensors (4096 step resolution) and 9 ball bearings for precision movement, a large 320x240 backlight display and many other features the Jeti DS-14s are sure to become the new standard in transmitter performance.

    One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 20 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

    One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DS-14 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

    Specifications and Features
    State-of-the-art, upgradable firmware which gives you full freedom and complete control.Solid aluminum, CNC cut transmitter case with fully integrated antennas and oversized LCD display.Mini USB port for firmware upgrades and PC download of telemetry data.Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited. Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch. 9-point, programmable curve mixes for all 14 digital proportional channels. You can set up not just dual, but triple rates.Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable. Unlimited use of the on-board 4GB SD card memory. Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited. Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more. All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose. Up to 5 programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

    Included:

    • (1) Jeti Duplex DS-14 Transmitter
    • (1) 110-230V Wall Power Supply
    • (1) Tx Battery Li-poly 3200mAh 3.7V (1S2P)
    • (1) Mini USB to USB PC Cable
    SKU: JDEX-TDS14-M1
    €799.00
    inc. VAT

     72HR STOCK

Manufacturers

Back