T-Rex 450,Pro,DFC

T-Rex 450,Pro,DFC
Here you can find spare parts and upgrades for T-rex 450 Pro
Page of 4
T-REX 450 Landing Skid/New

T-REX 450 Landing Skid/New

T-REX 450 Landing Skid/New

Use for T-REX 450 Plus/Sport/Sport V2/Pro/SE/SE V2.

Specification:

  • Horizontal stabilizer x 1
  • Vertical stabilizer x 1
  • Weight:7.8g

€7.50

Inc. VAT
Quantity
T-REX 450 PRO canopy mounting bolts

T-REX 450 PRO canopy mounting bolts

T-REX 450 PRO canopy mounting pack of 2


€4.50

Inc. VAT
Quantity
T-rex 450 Sport, Pro, Tail Pitch Assembly- METAL

T-rex 450 Sport, Pro, Tail Pitch Assembly- METAL

T-rex 450 Sport, Pro, Tail Pitch Assembly- METAL

€19.90

Inc. VAT
Quantity
T-REX 450 Stabilizer Mount

T-REX 450 Stabilizer Mount

T-REX 450 Stabilizer Mount

Use for T-REX 450 Sport/Sport V2.

Specification:

  • Stabilizer mount(Upper) x 1
  • Stabilizer mount(Lower) x 1
  • Socket button head screw x 2(M2x8mm)
  • Socket button head self screw x 2(T2x14mm)

€4.10

Inc. VAT
Quantity
T-Rex 450L / PRO M0.6 Torque Tube Front Drive Gear Set/28T

T-Rex 450L / PRO M0.6 Torque Tube Front Drive Gear Set/28T

T-Rex 450L / PRO M0.6 Torque Tube Front Drive Gear Set/28T

Specification:

  •     Use for T-REX 450L / PRO
  •     Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear.
  •     Effectively minimize gear striping and crash damage.

€13.00

Inc. VAT
Quantity
Tail Boom

Tail Boom

●347 Tail boom x 2(Φ11xΦ12x347mm)
●Rudder control rod x 1(Φ1.3x330mm)
●Ball link x 2
●Tail control guide x 2(Φ12.2xΦ14.6x4mm)

€10.50

Inc. VAT
Quantity
Tail Boom Brace

Tail Boom Brace

●Tail boom brace x 2

€8.50

Inc. VAT
Quantity
Tail Drive Assembly

Tail Drive Assembly

Tail Drive Assembly,Use for T-REX 450.

€9.50

Inc. VAT
Quantity
Tail Pitch Control Link

Tail Pitch Control Link

  • Tail pitch control link x 4
  • Collar A x 2
  • Collar B x 2
  • Tail rotor hub x 1

€6.99

Inc. VAT
Quantity
Tail Rotor Control Arm Set

Tail Rotor Control Arm Set

Tail control guide x 2
Tail rotor control arm x 1
Washer x 1(Φ2xΦ3.6x0.5mm)
Bearing MR52ZZ x 2(Φ2xΦ5x2.5mm)
Linkage ballA(M2x3.5) x 1(Φ4.75x8.18mm)

€7.30

Inc. VAT
Quantity
Tail Rotor Hub

Tail Rotor Hub

Suitable for all 450 class machines

Tail rotor hub × 2(Φ8x17.2mm)
Washer × 2(Φ2xΦ3.6x0.2mm)
Socket screw × 2(M2x8mm)
M3 Set screw × 2(M3x3mm)

€7.00

Inc. VAT
Quantity
Torque Tube Rear Drive Gear Set

Torque Tube Rear Drive Gear Set

Use for T-REX 450L / PRO.

Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
Must with HS1298 450V3 Torque Tube Drive Assembly
H45038A Metal Tail Torque Tube Unit
H45186 New Tail Torque Tube Unit

Specification:

  • Tail rotor shaft assembly x 2
  • Long umbrella gear x 2

€15.60

Inc. VAT
Quantity
Training Gear 300-450

Training Gear 300-450

A must for a pilot, save your heli from unwanted crashes , excellent item for beginners

An enlarged landing gear is a real advantage for the first attempts at learning to hover. It stops the tendency for the model to tip-over when landing at an angle or when travelling forward. The large balls, mounted at the ends of the struts, also improves the visibility of the model orientation in flight. The landing gear is designed for mini and middle sized models.

€9.90

Inc. VAT
Quantity
V2 Carbon Bottom Plate

V2 Carbon Bottom Plate

●Use for T-REX 450 Pro / 450 Pro 3GX.

Specification:

●Carbon bottom plate x 1(1.6mm)
●Weight:5.8g

€12.99

Inc. VAT
Quantity
V2 Carbon Fiber Main Frame

V2 Carbon Fiber Main Frame

●Use for T-REX 450 Pro

Specification:

●V2 Carbon fiber main frame x 1(1.2mm)
●Weight:16.3g

€19.00

Inc. VAT
Quantity
V2 Fuselage Parts - Anti rotation bracket & Tail servo mount

V2 Fuselage Parts - Anti rotation bracket & Tail servo mount

Use for T-REX 450 Pro / 450 Pro 3GX.

Specification:

Anti rotation bracket x 1
Tail servo mount x 1
Socket button head self tapping screw x 6(T2.6x6mm)
Weight:13.4g

€7.50

Inc. VAT
Quantity
V2 Motor Mount

V2 Motor Mount

Use for T-REX 450 Pro / 450 Pro 3GX.
6061-T6 Aluminum alloy material and CNC processed.

Specification:

Motor mount x 1
Socket button head screw x 4(M2.5x5mm)
Weight:4.3g

€11.50

Inc. VAT
Quantity
Align 460MX Brushless Motor 6s 1800KV

Align 460MX Brushless Motor 6s 1800KV

Align 460MX Brushless Motor(1800KV)

1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
3.Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
4.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
5.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
6.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
7.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
8.Suitable for T-REX 450E series,Must with RCE-BL45X Brushless ESC(Governer Mode)(HES45X01).

Specification:
 

  • Input voltage:6S
  • Max continuous current:30A/45A(5sec)
  • Max output power:Approx. 650w/970W(5sec)
  • KV value:1800KV
  • Dimension:spindle 3.5x29.2x38mm
  • Weight:Approx. 87g

Accessories:

  • Socket button head screw(M2.5X6mm) x 2
  • Washer(2.6X5.8X0.6mm) x 2
  • ALIGN standard 3mm gilt terminal x 3set

€67.00

Inc. VAT
Quantity
Align Brushless Motor 460 MX 3200 KV

Align Brushless Motor 460 MX 3200 KV

Align 460MX Brushless Motor 3200KV

1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 3s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor
2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
3.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
4.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
5.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
6.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
7.Suitable for T-REX 450E series.

Specification:

  • Input voltage:3S
  • Max continuous current:46A/68A(5sec)
  • Max output power:Approx. 500w/730W(5sec)
  • KV value:3200KV
  • Dimension:spindle 3.5x29.2x38mm
  • Weight:Approx. 87g
Accessories:

  • Socket button head screw(M2.5X6mm) x 2
  • Washer(Φ2.6XΦ5.8X0.6mm) x 2
  • ALIGN standard 3mm gilt terminal x 3set

€55.00

Inc. VAT
Quantity
Torque Tube Bearing Holder

Torque Tube Bearing Holder

Use for T-REX 450L / PRO.

Specification:

  • Torque tube drive bearing holder x 1(5.5x11.25x8mm)
  • Bearing MR84ZZ x 1(4x8x3mm)

€6.20

Inc. VAT
Quantity
Silver Metal canopy Grommet ring nuts 450 Size (2pcs)

Silver Metal canopy Grommet ring nuts 450 Size (2pcs)

CNC Silver aluminium Grommet for 450 Size Helicopters

  • Constructed of highest quality aluminum and long lasting rubber.
  • Hold your canopy tighter in your helicopter.
  • Easier to uninstall yet preventing damaging to your canopy.
  • Durable and multiple re-use.

Package includes:
2 x aluminum canopy grommets

Assembly Instruction: It's recommended to use a reamer to enlarge canopy mounting holes to fit the aluminum grommet.

€4.00

Inc. VAT
Quantity
Silver Metal canopy Grommet ring nuts 500-800 class helicopters

Silver Metal canopy Grommet ring nuts 500-800 class helicopters

Silver Metal canopy Grommet ring nuts 500-800 class

  • Constructed of highest quality aluminum and long lasting rubber.
  • Hold your canopy tighter in your helicopter.
  • Easier to uninstall yet preventing damaging to your canopy.
  • Durable and multiple re-use.

Package includes:
2 x aluminum canopy grommets

Assembly Instruction: It's recommended to use a reamer to enlarge canopy mounting holes to fit the aluminum grommet.

€5.00

Inc. VAT
Quantity
Page of 4