Align T-rex 100 & 150

Align T-rex 100 & 150

Spare parts for Align t-rex 150, and t-rex 100x. Suppliers of quality helicopters, kits, parts, accessories & fuel

Products


  • Align T-Rex 150 Tail Boom set

    Align T-Rex 150 Tail Boom set

    Align T-rex 150 Tail Boom set

    • 2x 150 tail boom (3.5x3.5x140mm)
    • 2x 150 Tail motor mount
    • 2x Socket button head self screw (T1.5x3mm)
    • 2x Socket button head screw (0-80x3mm)
    SKU: H15T002XX
    €6.00
    inc. VAT

     IN STOCK
  • Align T-Rex 150 Tail Motor

    Align T-Rex 150 Tail Motor

    150MT Tail Motor

    SKU: HML15M02
    €27.90
    inc. VAT

     LOW STOCK
  • Align T-Rex 150 Tail Motor Plug & Pin Set

    Align T-Rex 150 Tail Motor Plug & Pin Set

    Align T-Rex 150 Tail Motor Plug & Pin Set

    Made by alloy copper having high electrical conductivity.
    Surface dealing with high electrical conductivity gilt.

    Content:

    • 90° Pin Set x 3
    • F0.8 Heat shrink tube-Black(4mm) x 3
    • F0.8 Heat shrink tube-Red(4mm) x 3
    • F0.8 Heat shrink tube-Blue(4mm) x 3
    SKU: HMP15M02T
    €6.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 150 Vertical Stabilizer

    Align T-Rex 150 Vertical Stabilizer

    2x Vertical Stabilizer
    Spare part suitable for:Align T-REX 150

    SKU: H15T001XX
    €4.90
    inc. VAT

     72HR STOCK
  • Charge & Balance Cable for T-Rex 150 Parallel 4 batteries

    Charge & Balance Cable for T-Rex 150 Parallel 4 batteries

    Parallel (6x) JST-XH Charge & Balance Cable for T-Rex 150

    Avizar parallel charge leads allow you to charge up to four battery packs simultaneously. Constructed from silicone cable, produced in Germany, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to four of your 2S battery packs. Connect to your batteries with the JST-XH connectors, as used in the T-Rex 150. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. Top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    Specifications

    •   Input Charge Connector: Male 4mm Banana Plug
    •   Input Balance Connector: Male 2S JST-XH
    •   Output Connector: 2S Female JST-XH
    •   Wire Type: 16 AWG Silicone Charge Lead, 22 AWG Silicone Balance Lead
    •   Current Rating: 8A
    •   Length: 30cm
    SKU: AV53548
    €8.90
    inc. VAT

  • Lynx Heli Innovation Autorotation One Way Hub Assy T-Rex 150

    Lynx Heli Innovation Autorotation One Way Hub Assy T-Rex 150

    Lynx Heli Innovations has designed autorotation system for T-Rex 150 adding one way system.

    Lynx LX0940 autorotation system has Aluminum Hub, Reinforced CNC Main Gear 78T and Titanium Main Shaft.
    Smooth power transmission and Heavy Duty specification will support your T-Rex 150 Overpowered need to next level.
    We spent time optimizing the design and fly testing to achieve the required strength and resistance with final design without compromise.
    We are pilots, and we demand a Heli that can support any over-stress fly condition.
     
    FEATURES:

    Autorotation features.
    Tecnopolymer Precise and reinforced CNC main gear assures best wear resistance and perfect tooth mesh.
    Super precise Main gear concentricity for smooth and silent power transmission
    Main gear thickness 1.6mm and special “cross radius” cut design for the ultimate main gear rigidity
    Titanium G6 Main Shaft increase frame rigidity – pre assembled with Lynx collar.
    One way hub with Japan brand one way bearing.
    Fine shims spacer for the ultimate assembly and vertically play free function
    Direct replacement of std T-Rex 150 main gear / main shaft system
    FEA (Finite Elements Analysis) assisted, achieve lightweight and maximum strength.


    TECHNICAL SPECIFICATION:
     

    • Main Shaft Material: Titanium G6
    • One Way Hub Material: Aluminum 7075-T6
    • One Way Bearing: Chrome Steel Japan brand
    • Assembly weight:  3.6g


    PACKING LIST:

    • 1 x One Way Titanium main shaft pre-assembled with Lynx collar Black
    • 1 x 78T M0.3 Main Gear assembled with One Way Hub Red
    • 4 x Shim washer 3x4x0.1 for the best play free adjustment.

     

     

    SKU: LX0941
    €24.90
    inc. VAT

     LOW STOCK
  • Lynx Heli Innovation Cooled Tail Motor Support RED TREX 150

    Lynx Heli Innovation Cooled Tail Motor Support RED TREX 150

    Lynx Heli Innovation Cooled Tail Motor Support RED TREX 150

    Lynx Heli Innovations has redesigned the standard T-Rex 150 tail motor mount to increase strength and cooling. Our T-Rex 150 Heat Sink Tail Motor Mount is a direct fit replacement part made from CNC machined 7075 aluminum alloy to increase strength beyond what plastic or softer aluminum can offer. We incorporated heat sink fins to provide additional cooling capability, which lowers the operating temperature increasing motor efficiency and lifespan, allowing you to push it harder. A 1mm thick carbon fiber vertical tail fin is included with the package as well as all necessary hardware. The total assembled weight of just 1.68 grams. With our unique innovative design and materials used, we have created the perfect motor mount for the T-Rex 150.

    Micro RC helicopter upgrades can be a trap; they need to do more than just look nice they should add functionality and/or improve performance, not just add weight.

    We work tirelessly to optimize the design and perform flight-testing to achieve the desired benefits of additional strength and optimal air-cooling characteristics with a final weight and design specification without compromise. We are pilots, and we demand upgrades that truly deliver increased performance.

    Details and design combined with strength, durability, accurate CNC tolerances, fit and finish, integrated heat sinks and most important lightweight will ensure the best possible performance and lifespan out of the T-Rex 150 tail motor.

    FEATURES:

    • Direct fit replacement part for the standard T-Rex 150 tail motor mount.
    • 7075 Aluminum CNC machined Heat Sink Tail Motor Mount
    • 1mm thick carbon fiber vertical fin included.
    • Optimized air cooling design increases tail motor efficiency and lifespan.
    • FEA (Final Elements Analysis) assisted in achieving the most lightweight part with maximum strength.
    TECHNICAL SPECIFICATION:

    • Tail Motor Mount Material: Aluminum 7075-T6 black anodized finish
    • Vertical Fin: Carbon Fiber 1mm Thickness.
    • Hardware Material: Chrome Steel Alloy
    • Assembly Weight: 1.68 g (Tail Motor Mount, Hardware and Vertical Fin)
    SKU: LX0929
    €12.90
    inc. VAT

     IN STOCK
  • Lynx Heli Innovation Cooled Tail Motor Support Silver TREX 150

    Lynx Heli Innovation Cooled Tail Motor Support Silver TREX 150

    Lynx Heli Innovation Cooled Tail Motor Support Silver TREX 150

    Lynx Heli Innovations has redesigned the standard T-Rex 150 tail motor mount to increase strength and cooling. Our T-Rex 150 Heat Sink Tail Motor Mount is a direct fit replacement part made from CNC machined 7075 aluminum alloy to increase strength beyond what plastic or softer aluminum can offer. We incorporated heat sink fins to provide additional cooling capability, which lowers the operating temperature increasing motor efficiency and lifespan, allowing you to push it harder. A 1mm thick carbon fiber vertical tail fin is included with the package as well as all necessary hardware. The total assembled weight of just 1.68 grams. With our unique innovative design and materials used, we have created the perfect motor mount for the T-Rex 150.

    Micro RC helicopter upgrades can be a trap; they need to do more than just look nice they should add functionality and/or improve performance, not just add weight.

    We work tirelessly to optimize the design and perform flight-testing to achieve the desired benefits of additional strength and optimal air-cooling characteristics with a final weight and design specification without compromise. We are pilots, and we demand upgrades that truly deliver increased performance.

    Details and design combined with strength, durability, accurate CNC tolerances, fit and finish, integrated heat sinks and most important lightweight will ensure the best possible performance and lifespan out of the T-Rex 150 tail motor.

    FEATURES:

    • Direct fit replacement part for the standard T-Rex 150 tail motor mount.
    • 7075 Aluminum CNC machined Heat Sink Tail Motor Mount
    • 1mm thick carbon fiber vertical fin included.
    • Optimized air cooling design increases tail motor efficiency and lifespan.
    • FEA (Final Elements Analysis) assisted in achieving the most lightweight part with maximum strength.
    TECHNICAL SPECIFICATION:

    • Tail Motor Mount Material: Aluminum 7075-T6 black anodized finish
    • Vertical Fin: Carbon Fiber 1mm Thickness.
    • Hardware Material: Chrome Steel Alloy
    • Assembly Weight: 1.68 g (Tail Motor Mount, Hardware and Vertical Fin)
    SKU: LX0928
    €12.90
    inc. VAT

     IN STOCK
  • Lynx Heli Innovation T-Rex 150 - Carbon Fiber Ultra Tail Boom Stretch (+15mm) 2pc

    Lynx Heli Innovation T-Rex 150 - Carbon Fiber Ultra Tail Boom Stretch (+15mm) 2pc

    Lynx Heli Innovations has designed autorotation system for T-Rex 150 adding one way system.

    Lynx Heli Innovations introduce a reinforced OEM T-Rex 150 Carbon Fiber Ultra Tail boom, and introduce the stretch edition that is 15 mm longer.

    We design and produce this new Carbon Fiber tail boom with the outer dimension as the standard boom for the best fit perfectly without modification, and we made it incredibly stiff. Using high quality carbon fiber and epoxy we are proud to introduce a stronger and stiff T-Rex 150 boom lighter than standard  aluminum one.

    Major benefit are in tail performance, but even if lighter than standard one will surprise for the crash resistance.

    Thamks the stretch edition is possible use longer blade 135 and 140 mm or usign standard blade get higer tail autority.

    FEATURES:

    • Direct replacement for your T-Rex 150 tail boom, stretching the tail 15 mm.
    • Lighter than standard boom but incredibly stronger.
    • Increased tail system rigidity give precise and crispy fly feeling with standard tail motors.
    • Incredible crash resistance.
    TECHNICAL SPECIFICATION:

    • Tail Boom Material: Pure Carbon Fiber OEM Lynx
    • Weight: 1.78g
    PACKING LIST:

    • 2 x Stretch T-Rex 150 Carbon Fiber Ultra Tail Boom (+ 15 mm)
    SKU: LX0952
    €6.90
    inc. VAT

     IN STOCK
  • Lynx Heli Innovation Titanium Steel Spindle Shaft TRex 150

    Lynx Heli Innovation Titanium Steel Spindle Shaft TRex 150

    Lynx Heli Innovation Titanium Steel Spindle Shaft TRex 150 LX0923

    Lynx Heli Innovations is always looking for a better way of doing things.

    Using the finest precision high quality CNC finish, Lynx has produced a Titanium G6 special edition spindle shaft for TRex 150.

    We use titanium to achieve the best ratio between strength and weight.

    Lynx knows that the TRex 150 is a high performance helicopter, requiring some serious spindle shaft specifications, without compromise.

    Small details make an important difference.

    In order to assure the best planar face connection between the spindle / screw / bearing, Lynx has added CNC brass shims washers.

    TECHNICAL SPECIFICATION:

    • Spindle shaft material: Titanium grade 6
    • Shims washer material: Brass 360
    • Screw material: Plated steel—DIN 7985
    • Assembly weight: 0.55g


    SKU: LX0923
    €11.50
    inc. VAT

     LOW STOCK
  • Lynx Heli Innovation Ultra Dampeners TREX 150

    Lynx Heli Innovation Ultra Dampeners TREX 150

    Lynx Heli Innovation Ultra Dampeners TREX 150 LX0932

    Here at Lynx Heli Innovations we are helicopter pilots and fly the same models you do.

    The T-Rex 150 employs DFC head design, that system can perform better if special semi-rigid dampeners are used.

    By combining our engineering and helicopter experience we have designed special dampeners that hold the spindle and reduce play to emphasize the semi-rigid head flight characteristics.

    Our dampeners will increase the response and the fly precision of your T-Rex 150.

    These dampeners give your T-Rex 150 an incredibly precise feel in the air. The difference is visible, particularly in fast forward flight and with quick pitch changes.

    Our tests show that T-Rex 150 Lynx dampeners are advised when high head speed is requested (100% throttle curve in STD. heli configuration).

    FEATURES:

    • Direct replacement for yourT-Rex 150.
    • Increased head rigidity give precise and crispy fly feeling with standard plastic head or with any brand head upgrades parts. Quick move response
    • Incredible spam life resistance.
    • No metal shims required thanks innovative Lynx bushing shape design
    TECHNICAL SPECIFICATION:

    • Fine Adjustement Shims Washer: Brass
    • Bushing Material: Techno-Polymer base POM.

    SKU: LX0932
    €5.90
    inc. VAT

     IN STOCK
  • Lynx Main Blade 120 mm Bullet Pro Green 2 sets Trex150

    Lynx Main Blade 120 mm Bullet Pro Green 2 sets Trex150

    Lynx Main Blade 120 mm Bullet Pro Green 2 sets Trex150 LXT1202-SP

    Lynx Heli Innovations are now producing high quality main blades! Trex 150 main blades "Pro" Edition are evolutions of the well know first edition.

    FF-R stay for Fast Fly Pro Edition

    Why are Lynx doing the “bullet” main blade? What are the benefits of flying this blade?? Adding a specific weight on the leading blade edge will move the blade CG and force different blade timing position once is in flight. Moving CG and changing the timing allows a change of the blade specification in terms of precision, and reaction speed.

    Our “bullet” main blade was designed for fast fly performance, reducing the reaction speed compared to the 3D Edition giving better precision and more authority in wind conditions.

    As ever Lynx has redefined the standards with innovative products.

    Features:

    • Stretch your T-Rex 150 from standard 120mm Main Blade to 125mm
    • Using Standard Tail Boom
    • Extra Stability and Visibility increasing 10mm disc diameter
    • Extra Performance and Pops increasing 10% rotor disk surface
    • Perfect tracking
    • Incredible stability
    • Increased pitch response
    • Increased efficiency
    • "knife" precision in any 3D maneuvers
    • New brighten colors
    • Extreme crash and wear resistance.
    • Super convenient 2 Sets package.

    Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend. The blades features incredible material stability that guarantees constant blade shape (no warping), even with extreme weather conditions (very hot, very cold). The result is a stiff blade giving the best helicopter performance under all conditions. When flying the Lynx Trex 150 blades on your helicopter, you will immediately see the precision of the rotor disc and the resulting accuracy and agility during flight.

    T-Rex 150 Main Blade was designed and test to be flyable until 8000 RMP.

    SKU: LXT1202-SP
    €14.90
    inc. VAT

     IN STOCK
  • Lynx Main Blade 120 mm Pro Edition Green 2 sets Trex150

    Lynx Main Blade 120 mm Pro Edition Green 2 sets Trex150

    Lynx Main Blade 120 mm Pro Edition Green 2 sets Trex150 LXT1202-3D

    Lynx Heli Innovations are now producing high quality main blades! Trex 150 main blades "Pro" Edition are evolutions of the well know first edition.

    3D-R stay for 3D Pro Edition

    Once again Lynx redefine the standards with another innovative products.

    Features:

    • Perfect tracking
    • Incredible stability
    • Increased pitch response
    • Increased efficiency
    • "knife" precision in any 3D maneuvers
    • New brighten colors
    • Extreme crash and wear resistance.
    • Super convenient 2 Sets package.

    Thanks to our expert plastics consultant, we have optimized the weight and the rigidity using an exotic polymer blend. The blades features incredible material stability that guarantees constant blade shape (no warping), even with extreme weather conditions (very hot, very cold). The result is a stiff blade giving the best helicopter performance under all conditions. When flying the Lynx Trex 150 blades on your helicopter, you will immediately see the precision of the rotor disc and the resulting accuracy and agility during flight.

    T-Rex 150 Main Blade was designed and tested to be flyable upto 8000 RMP.

    Materials:

    • Plastic Polymer Base PA66
    • Specifications:
    • Main blade Trex 150
    • Blade length: 120 mm
    • Average single blade weight: 3.18 g
    SKU: LXT1202-3D
    €14.90
    inc. VAT

     IN STOCK
  • Performance-Boost-Set T-REX 150

    Performance-Boost-Set T-REX 150

     Performance-Boost-Set T-REX 150

    SKU: H15H008XX
    €18.90
    inc. VAT

     72HR STOCK
  • Rakonheli CNC Advanced Upgrade Kit (Blue) - Trex 150 DFC

    Rakonheli CNC Advanced Upgrade Kit (Blue) - Trex 150 DFC

    Rakonheli CNC Advanced Upgrade Kit (Blue) - Trex 150 DFC

    Included:
    1 x (SKU: 15DFC005) CNC AL DFC Head Combo 02
    1 x (SKU: 15DFC178) CNC AL Swashplate Set
    1 x (SKU: 15DFC208) Plastic Main Blade 116mm
    1 x (SKU: 15DFC304) CNC Oneway Main Gear w/Solid Carbon Main Shaft Set
    1 x (SKU: 15DFC452) CNC AL and CF Main Frame Set
    1 x CNC Landing Gear Style
    1 x (SKU: 15DFC802-CF) 3.5mm Square Carbon Tail Boom-Standard Length
    1 x (SKU: 15DFC862) CNC Tail Motor Mount w/Protection Set
    1 x (SKU: 15DFC974) Plastic Tail Blade 47mm
    SKU: RKH-15DFC982-B
    €138.00

  • Rakonheli CNC Advanced Upgrade Kit (Red) - Trex 150 DFC

    Rakonheli CNC Advanced Upgrade Kit (Red) - Trex 150 DFC

    Rakonheli CNC Advanced Upgrade Kit (Red) - Trex 150 DFC

    Included:
    1 x (SKU: 15DFC005) CNC AL DFC Head Combo 02
    1 x (SKU: 15DFC178) CNC AL Swashplate Set
    1 x (SKU: 15DFC208) Plastic Main Blade 116mm
    1 x (SKU: 15DFC304) CNC Oneway Main Gear w/Solid Carbon Main Shaft Set
    1 x (SKU: 15DFC452) CNC AL and CF Main Frame Set
    1 x CNC Landing Gear Style
    1 x (SKU: 15DFC802-CF) 3.5mm Square Carbon Tail Boom-Standard Length
    1 x (SKU: 15DFC862) CNC Tail Motor Mount w/Protection Set
    1 x (SKU: 15DFC974) Plastic Tail Blade 47mm

    Canopy not included

    SKU: RKH-15DFC982-R
    €138.00
    inc. VAT

  • Rakonheli CNC AL and CF Main Frame Set (Blue)

    Rakonheli CNC AL and CF Main Frame Set (Blue)

    1. Description:

    • Precision CNC Main Frame is designed from Aluminum alloy, Carbon Fiber and Delrin material to get more strength.
    • Special Features:
    • Compatible and replaceable for Plastic Main Frame.
    • There are two pieces carbon fiber to support Tail system better and more stronger.
    • There are two screws at Landing Gear Holder for supporting landing gear better.
    • Maximum can use Main Motor diameter 15.5mm.
    • Adjustable Main Motor to get better gearmesh.
    • Aluminum Motor Mount as heatsink with large contact area help motor increase efficiency and cooler.
    • Optimized for weight and durability.


    2. Usage:
    Use for Trex 150 DFC.

    3. Weight:

    • rame: 0.Stock Frame: 4.87(g) = 0.17(oz).
    • CNC AL and CF Main Frame Set: 4.69(g) = 0.16(oz). Lighter weight than Stock F18(g).


    4. Included:
    CNC AL and CF Main Frame (1set).

    Hardware:

    • (SKU: MR63-2) 3x6x2 Radial Bearing (2pcs).
    • (SKU: M1x2PH-10) M1x2mm Pan Head Screw (8pcs).
    • (SKU: M1x3SPH-10) M1x3mm Self Tapping Pan Head Screw (7pcs).
    • (SKU: M1.2x2PH-10) M1.2x2mm Pan Head Screw (1pcs).
    • (SKU: M1.2x3PH-10) M1.2x3mm Pan Head Screw (2pcs).
    • (SKU: M1.2x6PH-10) M1.2x6mm Pan Head Screw (1pcs).


    SKU: RKH-15DFC452-B
    €33.00
    inc. VAT

     LOW STOCK
  • Rakonheli CNC AL and CF Main Frame Set (Green)

    Rakonheli CNC AL and CF Main Frame Set (Green)

    1. Description:

    • Precision CNC Main Frame is designed from Aluminum alloy, Carbon Fiber and Delrin material to get more strength.
    • Special Features:
    • Compatible and replaceable for Plastic Main Frame.
    • There are two pieces carbon fiber to support Tail system better and more stronger.
    • There are two screws at Landing Gear Holder for supporting landing gear better.
    • Maximum can use Main Motor diameter 15.5mm.
    • Adjustable Main Motor to get better gearmesh.
    • Aluminum Motor Mount as heatsink with large contact area help motor increase efficiency and cooler.
    • Optimized for weight and durability.


    2. Usage:
    Use for Trex 150 DFC.

    3. Weight:

    • rame: 0.Stock Frame: 4.87(g) = 0.17(oz).
    • CNC AL and CF Main Frame Set: 4.69(g) = 0.16(oz). Lighter weight than Stock F18(g).


    4. Included:
    CNC AL and CF Main Frame (1set).

    Hardware:

    • (SKU: MR63-2) 3x6x2 Radial Bearing (2pcs).
    • (SKU: M1x2PH-10) M1x2mm Pan Head Screw (8pcs).
    • (SKU: M1x3SPH-10) M1x3mm Self Tapping Pan Head Screw (7pcs).
    • (SKU: M1.2x2PH-10) M1.2x2mm Pan Head Screw (1pcs).
    • (SKU: M1.2x3PH-10) M1.2x3mm Pan Head Screw (2pcs).
    • (SKU: M1.2x6PH-10) M1.2x6mm Pan Head Screw (1pcs).


    SKU: RKH-15DFC452-G
    €33.00
    inc. VAT

     LOW STOCK
  • Rakonheli CNC AL and CF Main Frame Set (Red)

    Rakonheli CNC AL and CF Main Frame Set (Red)

    1. Description:

    • Precision CNC Main Frame is designed from Aluminum alloy, Carbon Fiber and Delrin material to get more strength.
    • Special Features:
    • Compatible and replaceable for Plastic Main Frame.
    • There are two pieces carbon fiber to support Tail system better and more stronger.
    • There are two screws at Landing Gear Holder for supporting landing gear better.
    • Maximum can use Main Motor diameter 15.5mm.
    • Adjustable Main Motor to get better gearmesh.
    • Aluminum Motor Mount as heatsink with large contact area help motor increase efficiency and cooler.
    • Optimized for weight and durability.


    2. Usage:
    Use for Trex 150 DFC.

    3. Weight:

    • rame: 0.Stock Frame: 4.87(g) = 0.17(oz).
    • CNC AL and CF Main Frame Set: 4.69(g) = 0.16(oz). Lighter weight than Stock F18(g).


    4. Included:
    CNC AL and CF Main Frame (1set).

    Hardware:

    • (SKU: MR63-2) 3x6x2 Radial Bearing (2pcs).
    • (SKU: M1x2PH-10) M1x2mm Pan Head Screw (8pcs).
    • (SKU: M1x3SPH-10) M1x3mm Self Tapping Pan Head Screw (7pcs).
    • (SKU: M1.2x2PH-10) M1.2x2mm Pan Head Screw (1pcs).
    • (SKU: M1.2x3PH-10) M1.2x3mm Pan Head Screw (2pcs).
    • (SKU: M1.2x6PH-10) M1.2x6mm Pan Head Screw (1pcs).


    SKU: RKH-15DFC452-R
    €33.00
    inc. VAT

  • Rakonheli CNC DS150/155 Servo Metal Gears - Trex 150/ Blade 180CFX

    Rakonheli CNC DS150/155 Servo Metal Gears - Trex 150/ Blade 180CFX

    Rakonheli CNC DS150/155 Servo Metal Gears -Fits  Trex 150 DFC AND  Blade 180 CFX

    Description:

    • Precision CNC Servo Metal Gears.
    • Compatible and replacement Plastic Servo Gears of DS150/155 ALIGN T-REX 150 DFC.ND  Blade 180 CFX
    • Optimized for weight and durability.
    SKU: RKH-SMG0001
    €11.28
    inc. VAT

  • Rubber Canopy Grommet Set - nCPX, nQX, mCPX/mCPXBL, 150DFC

    Rubber Canopy Grommet Set - nCPX, nQX, mCPX/mCPXBL, 150DFC

    Use for BLADE nCPX, nQX, mCPX/mCPXBL and Align T-rex 150 DFC.

    Included: 4 x Rubber Canopy Grommet.

    SKU: RS00662-4
    €1.35
    inc. VAT

     IN STOCK

Manufacturers

Back