T-Motor

T-Motor

 Tiger motor is producing quality motors for Multi rotors, large size bearings, smooth and balanced cages.

Products


  • Carbon Prop Cover T-Motor  for MN18XX, MN22XX

    Carbon Prop Cover T-Motor for MN18XX, MN22XX

    Tiger Motor - Carbon Prop Cover - for MN18XX, MN22XX

    SKU: CPC006
    €2.00
    inc. VAT

     IN STOCK
  • Multicopter Tiger Motor MN605S 170KV set of 2

    Multicopter Tiger Motor MN605S 170KV set of 2

    The new generation of Navigator MN motors are specially designed for industrial drone applications. The new completely enclosed design maintains the lightness of the Navigator MN motors, giving extra winding protection. The water resistance has IP55, which guarantees a correct operation in adverse environments.

    The bearings, are Japanese EZO brand, along with mechanically balanced bell, ensure optimal performance and minimal vibration. This is very important in multi-rotors that with aerial cameras.

    Strong power ,long service life
    • Excellent cooling performance
    • Anti-high temperature/Anti-overload
    • Dust-resistance/Waterproof/Anti-corrosion

    T-motor Newest 8.1KG+ Thrust MN605-S KV170 2Pcs/Set For RC Boat Drone Airplane Aircarft Quadcopter Hexacopter.
    Specifications

    •     Motor size: ø68.8*39.4mm
    •     Stator: Imported silicon steel sheet; Anti-rust treatment; 180° Chigh temperature-resisting coating
    •     Configuration: 24N28P
    •     Shaft Diameter: IN: 6mm, OUT: 4mm
    •     Bearing: Imported 6262ZZ
    •     Magnet Level: 150°C high temperature resistance: Level E
    •     Silicon Cable: 16WG*150MM
    •     Copper Wire: 180°C high temperature resistance: Level H
    •     Coil Insulation Test: 500V
    •     Centrifugal Cooling Design: YES
    •     Rotor Dynamic Balance Standard: <5mg
    •     Motor Dynamic Balance Standard: <10mg
    •     IP: IP35

    Includes

    •     4x M3*10 mounting screws
    •     2x cover
    •     8x M4*12 motor mounting screws

     

    SKU: MN605S170
    €299.00
    inc. VAT

     IN STOCK
    NEW
  • Multicopter Tiger Motor MN605S 320KV set of 2

    Multicopter Tiger Motor MN605S 320KV set of 2

    The new generation of Navigator MN motors are specially designed for industrial drone applications. The new completely enclosed design maintains the lightness of the Navigator MN motors, giving extra winding protection. The water resistance has IP55, which guarantees a correct operation in adverse environments.

    The bearings, are Japanese EZO brand, along with mechanically balanced bell, ensure optimal performance and minimal vibration. This is very important in multi-rotors that with aerial cameras.

    Strong power ,long service life
    • Excellent cooling performance
    • Anti-high temperature/Anti-overload
    • Dust-resistance/Waterproof/Anti-corrosion

    Specifications

    •     KV: 320
    •     Configuration: 24N22P
    •     Motor Dimensions(Dia.*Len): Φ68.8×39.4mm
    •     Shaft diameter: inner 6mm, out 4mm
    •     Weight(g): 316g
    •     ldle Current(10)@10v(A): 2A
    •     No.of Cells(Lipo): 6S
    •     IP: IP55
    •     Max Continuous Current(A)180S: 55A
    •     Max Continuous Power(W)180S: 1400W
    •     Internal Resistance: 30mΩ
    •     ESC: Flame 70A
    •     Prop: 21 ~ 22 inch
    •     Silicon Wire: 16AWG 150mm

      Includes
       
    • 2x T-Motor MN605S 320KV
    • 8x M3x8 Screw
    • 8x M4x12 Screw
    • 2x Prop Cover
    SKU: MN605S320
    €299.00
    inc. VAT

     LOW STOCK
    NEW
  • Navigator Series MN4012 340Kv Multicopter Motor

    Navigator Series MN4012 340Kv Multicopter Motor

    T-motor MN4012 Brushless MultiRotor Motor 4012 motors with 60cm leads.
    Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference when you turn them, and hear the difference when the run!

    Features:
    600mm soft silicone power wires
    Sealed Japanese EZO bearings
    Short, hardened Japanese steel shaft
    0.2mm NdFeB stator plates
    Includes 6mm, 8mm and DJI style prop adapter.

    Specification

    • RPM/V  340Kv
    • Number of cells  4~8S LiPo
    • Resistance  75mΩ
    • No Load Current  1A
    • Max. efficiency current  4-10A
    • Max. Amps  25A continuous for 180 seconds
    • Max Power :  660W continuous for 180 seconds
    • Size  44.8x32.5mm
    • Weight  128g
    • Shaft diameter  4mm
    SKU: TM-MN4012-13
    €79.00
    inc. VAT

     72HR STOCK
  • Navigator Series MN4014 330Kv Multicopter Motor

    Navigator Series MN4014 330Kv Multicopter Motor

    T-motor MN4014 Brushless MultiRotor Motor 4014 motors with 60cm leads.

    Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference when you turn them, and hear the difference when the run!  

    Features:
    600mm soft silicone power wires
    Sealed Japanese EZO bearings
    Short, hardened Japanese steel shaft
    0.2mm NdFeB stator plates
    Includes 6mm, 8mm and DJI style prop adapter.

    Specifications:

    •   Model: MN4014
    •   Motor size: 44.8L x 34.5D mm
    •   Shaft diameter: 4mm
    •   Weight: 150g
    •   KV(rpm/v): 400
    •   Max Power Continuous: 900W
    •   Max Current: 30A
    •   Max Efficiency Current: 3 - 12A >81%
    •   Battery: 4 - 8s LiPo
    •   Prop: 13 x 6.5 - 16 x 8
    •   ESC: 40A
    SKU: TM-MN4014
    €89.00
    inc. VAT

  • T-Motor Air Gear 350 Combo – Motors, ESC’s & Props

    T-Motor Air Gear 350 Combo – Motors, ESC’s & Props

    T-Motor Air Gear 350 – Combo

    • Ideal to 1200g to 1500g quadcopter
    • Low noise and high-speed respond
    • Easy and quick installation
    • Perfectly match your drone

    This is a great power set for 1.2 – 1.5kg quadcopter, can be used with 3-4s, includes self-tightening props. These high quality motor sets are great value.

    Includes

    • 4 x AIR2213 920kv 54g Brushless Motors (With ready soldered 3.5mm bullet connectors)
    • 4 × 9.5×4.5 plastic self-locking propellers (2 CW and 2 CCW)
    • 4 x AIR20A V2 compact ESC (With ready-soldered 3.5mm bullet connectors to mate with the motors)
    SKU: AirGear350
    €99.00
    inc. VAT

     72HR STOCK
  • T-MOTOR ALPHA 60A HV 6-12S Brushless ESC

    T-MOTOR ALPHA 60A HV 6-12S Brushless ESC

    T-MOTOR Alpha 60A HVesc is low noise, low temperature and low interference. It has fast throttle response and high efficiency. It is compatible with MN501S KV240 , MN701S KV135 , MN705S KV125, MN601S KV170, MN605S KV170, MN7005 KV115, U8II/Lite KV100, U8II/Lite KV85, U10II KV100 and etc.

    Specifications:

    • Item Brand: T-Motor
    • Item Model: Alpha 60A HV
    • Size: 75.7 x 32.5 x 16.2mm
    • Weight: 73g
    • Support Voltage: 18-50.4V
    • BEC: No
    • Con. Current: 60A
    • Peak Current: 80A
    • Standby Consumption: ≤50mA
    • Throttle Pos. Range: 1100-1940us
    • Throttle Refresh Frequency: 500Hz
    • Throttle Response Speed: 3000ms

    Package Included:
    T-MOTOR ALPHA 60A HV Brushless ESC x 1
    User Manual x 1

    SKU: ALPHA60HV
    €115.00
    inc. VAT

     IN STOCK
    NEW
  • T-Motor ALPHA 60A LV ESC for professional applications.

    T-Motor ALPHA 60A LV ESC for professional applications.

    T-Motor's Alpha 60A ESC is perfect for professional applications. Large UAVs demand reliable components and the Alpha has numerous levels of protection to keep your gear safe.

    4-6S vector control ESC with enclosed and light-weight design

    Specifications

    •     Size: 71.3x32.5x15.9mm
    •     Weight (Incl. Cable): 62.8g
    •     Motor Cable: Silicone wire-deep orange- 16AWG-70MMx3Pcs
    •     Power Cable: Silicone wire-red/black-14AWG-175MM
    •     Signal Cable: PVC flat cable- 30 core wires-- 2-355MM (white, blank, black/JP 3P male connector)
    •     Upgrade Cable: PVC flat cable-30 core wires--3-50MM (black, red, white/JP 3P male connector)
    •     Support Voltage: 6S/18-25.2V
    •     Cont. Current: 40A
    •     Peak Current (10s): 60A
    •     Standby Consumption: <= 50mA
    •     BEC: No
    •     Throttle Pos. Range: 110-1900μs
    •     Throttle Refresh Frequency: 500Hz
    •     Throttle Response Speed: 50ms

     

    SKU: ALPHA60LV
    €79.00
    inc. VAT

     LOW STOCK
    NEW
  • T-Motor Carbon Prop – 18 x 6.1 – Pair

    T-Motor Carbon Prop – 18 x 6.1 – Pair

    T-Motor Carbon Prop – 18 x 6.1 – Pair

    Product Description

    One pair (CW + CCW) T-Motor 18″x6.1″ carbon fibre propellers with 6mm middle hole. (T-Motor P18x6.1)

    • Longer Flight Time
    • 100% Balance
    • Higher Loaded Ability
    • Lightweight / High-strength

    Includes:

    • 2 x CF Props, 1 x CW, 1 x CCW
    • Felt Cover
    • Mounting Kit (Copper Adapter, Cover and 4 x M3x10)

     

    SKU: TM-P18X6.1
    €89.90
    inc. VAT

  • T-Motor Foldable Carbon Fibre Prop 15.2 x 5 – Pair

    T-Motor Foldable Carbon Fibre Prop 15.2 x 5 – Pair

    High precision foldable, light and stiff propeller made from carbon.
    These propellers are used in order to decrease vibrations and to have a smoother flight .
    They benefit from latest T-Motor improvements like the winglets that decreases greatly vortex at the blade extremity.

    Set of 2 props

    SKU: FA15.2X5L
    €99.00
    inc. VAT

     LOW STOCK
  • T-Motor Limited Edition 2213-950kv set including 4x motors and props

    T-Motor Limited Edition 2213-950kv set including 4x motors and props

    It has been six year since the birth of T-MOTOR. In order to share their happiness and joy with all the honored and friend-like customers who have witnessed the growth of T-MOTOR, and who have offered their support all the way, they have released the special COMBO PACK for their 6th Anniversary Celebration.

    Specifications:

    • Excellent Propulsion System
    • Incredible Cost Performance
    • 280g/arm @3s
    • 400g/arm@4s

    Included in the set:

    • 4x MN2213 kv950
    • 4x T9545 plastic self-tightening props (2CW+2CCW)
    SKU: TM-ANNIVERSARYSET
    €89.00
    inc. VAT

  • T-Motor MT2814-11 kv710

    T-Motor MT2814-11 kv710

     T-motor 2814, 710kv, developed especially for Multicopters.

    Tech Specs

    • kV : 710
    • Weight : 120gr
    • Dimensions : 35x36mm
    • Voltage : 3- 4S
    • Max Current (3min.) : 21A
    • Power: 220W
    SKU: MT2814-11
    €69.00
    inc. VAT

     72HR STOCK
  • T-Motor MT2826/11 380Kv Multicopter Motor

    T-Motor MT2826/11 380Kv Multicopter Motor

    600mm soft silicone power wires
    Sealed Japanese EZO bearings
    Short, hardened Japanese steel shaft
    0.2mm NdFeB stator plates

    Includes radial mount and prop adapter

    Specification

    • RPM/V  380Kv
    • Number of cells    3~6S LiPo
    • Resistance    59mΩ
    • No Load Current    0.7
    • Max. efficiency current    10~24A
    • Max. Amps    30A continuous
    • Max Power (Watts)  370W continuous
    • Size  35x48mm
    • Weight  187g
    • Shaft diameter  5mm
    • Suggested Prop Size  15x4~16x8 (4S), 12x4~14x7(6S)

    SKU: MT2826-11
    €69.00
    inc. VAT

     LOW STOCK
  • T-motor Speed controller T40PRO -400Hz

    T-motor Speed controller T40PRO -400Hz

    T-motor Speed controller T40PRO -400Hz, electronic speed controller 40a, pro version, latest Fets


    T-series pro ESC has the best performance, it is the super-class product for RC airplane and helicopter and multiroto-copter.

    Features :
    2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Three types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transferred through optical/electrical coupled system to avoid electromagnetic interference.2.6 Perfect governor mode for Multiro-copter.2.7 Wide-opened heat-sink has the best heat dissipation effect.2.8 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.9 User programmable. 2.10 Multiple program methods supported: transmitter stick, Digital LED Program Card, Multifunction LCD Program Box, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.

    Specification:

    • Output:  Continuous 40A, burst 60A up to 10 seconds.
    • Input Voltage:  2-6 cells lithium battery or 5-18 cells NiMH battery.
    • Refresh rate of the throttle signal: 50Hz to 432Hz.
    • Control Signal Transmission: Optical/electrical coupled system.
    • Max Speed:  210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.      (BLM = BrushLess Motor)
    • Size:  59mm (L) * 27mm (W) * 12mm (H).7. Weight:  29g.

     

    SKU: TM40APRO
    €43.00
    inc. VAT

     LOW STOCK
  • T-motor Speed controller T40PRO -400Hz (CLONE)

    T-motor Speed controller T40PRO -400Hz (CLONE)

    T-motor Speed controller T40PRO -400Hz, electronic speed controller 40a, pro version, latest Fets


    T-series pro ESC has the best performance, it is the super-class product for RC airplane and helicopter and multiroto-copter.

    Features :
    2.1 High performance microprocessor, best compatibility with all kinds of motors, highest driving efficiency.2.2 Three types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 2.3 Smooth, linear, quick and precise throttle response.2.4 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection.2.5 The throttle signal is transferred through optical/electrical coupled system to avoid electromagnetic interference.2.6 Perfect governor mode for Multiro-copter.2.7 Wide-opened heat-sink has the best heat dissipation effect.2.8 The firmware of the ESC can be updated through the built-in USB adapter in the Professional LCD Program Box.2.9 User programmable. 2.10 Multiple program methods supported: transmitter stick, Digital LED Program Card, Multifunction LCD Program Box, Professional LCD Program Box, PC software. Very easy to program the ESC at home or at the flying field.

    Specification:

    • Output:  Continuous 40A, burst 60A up to 10 seconds.
    • Input Voltage:  2-6 cells lithium battery or 5-18 cells NiMH battery.
    • Refresh rate of the throttle signal: 50Hz to 432Hz.
    • Control Signal Transmission: Optical/electrical coupled system.
    • Max Speed:  210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.      (BLM = BrushLess Motor)
    • Size:  59mm (L) * 27mm (W) * 12mm (H).7. Weight:  29g.

     

    SKU: TM40APRO1
    €43.00
    inc. VAT

     LOW STOCK
  • T-motor Speed controller T60-400Hz

    T-motor Speed controller T60-400Hz

    T-motor Speed controller T60  ESC60A  400Hz.

    • Output:  Continuous 60A, Burst 80A up to 10 Secs.
    • Input Voltage:  2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.  
    • BEC:  Pentium-60A: 3A / 5V (Switch mode).
    • Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
    • Size:  70mm (L) * 31mm (W) * 14mm (H).
    • Weight:  60g.

    Features:

    • Extreme low output resistance, super current endurance.
    • Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
    • 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters.
    • Throttle range can be configured and is fully compatible with all transmitters currently available on market.
    • Smooth, linear and precise throttle response.

     

    SKU: TM-T60A
    €69.00
    inc. VAT

     LOW STOCK
  • T-Motor U5 KV400 Motor U-Power Series

    T-Motor U5 KV400 Motor U-Power Series

    T-Motor U5 KV400 Motor U-Power Series: Stable, Durable, Powerful.

    U-Power Technologies for AUW 8-12KG Multi-copter. Industrial grade, dust proof, water proof.

    Unique Side Hole Design ensures swift airflow. Motor cools 2.5 times faster than others. Six holes beveling upward sparkles motor with waterproof and sand-resistant features.

    Abnormal Shaft – a special screw is used for stator and rotor installation, avoiding loosiness of circlip.

    High-Quality Varnished Wired – imported, oxygen-free copper coil which can tolerate temperature of 180C is employed to enhance short circuit resistance.

    High-Standard Silicon Steel Sheet Precision Winding – the precision winding ensures the tightness of coil and slot. It helps reduce the copper lose while improving the utilization. Advanced 0.2mm silicon steel sheet reduces heat and eddy, thus improving efficiency.

    Larger Bearing – Lower Noise: Adoption of imported German bearing prolongs the service life to over 1600 hours under trouble-free operation. German bearing enables motor run more smoothly and longer with lower noise.

    Propeller Installation (Two Options, Patent Design) – Prop Installation and Traditional Installation.

    Recommendation:

    Voltage: 6S
    Recommended prop: T-Motor CF15*5 / CF16*5.4 prop
    AUW: Hexacopter, 9KG; Octocopter, 12KG.

    SKU: U5-KV400
    €99.00
    inc. VAT

     LOW STOCK
  • Tiger Motor Flame 60A ESC High Voltage 6-12S

    Tiger Motor Flame 60A ESC High Voltage 6-12S

    T-Motor 60A Flame ESC. Special core program for multirotor controllers greatly improves throttle response. Specially optimized software for excellent compatibility with disc-type motors. All settings exoept the timing are preset, making usage simple, highly intelligent and adaptive. Compatible with various flight-control systems and supports a signal frequency of up to 600Hz.

    Features

    • Special core program for multirotor controllers greatly improves throttle response.
    • Specially optimized software for excellent compatibility with disc-type motors.
    • All settings exoept the timing are preset, making usage simple, highly intelligent and adaptive.
    • Compatible with various flight-control systems and supports a signal frequency of up to 600Hz.
    • CNC aluminium alloy enclosure, IP55 PCB with nano technology.widely used in special
    • domain such as UAV for Aqriculture,SearchinQ & etc.
    • Supporting 6-12S Lipo,efficient heat dissipation,low power consumption,
    • Cooperating with T-motor product makes better efficiency.
    • (Note: all throttle signals over 500Hz are non-standard signals) .

    Specs
    Weight0.6 lbs
    Dimensions6.75 x 2.75 x 2.25 in

    SKU: FLAME60
    €105.00
    inc. VAT

     IN STOCK
  • Tiger Motor T-Motor M6 CCW Prop Adapter Set for MN4010 MN4012 MN4014

    Tiger Motor T-Motor M6 CCW Prop Adapter Set for MN4010 MN4012 MN4014

    Tiger Motor T-Motor M6 CCW Prop Adapter Set for MN4010 MN4012 MN4014

    SKU: TMPAM6
    €12.00
    inc. VAT

  • Tiger Motor T-Motor M8 CCW Prop Adapter Set for MN4010 MN4012 MN4014

    Tiger Motor T-Motor M8 CCW Prop Adapter Set for MN4010 MN4012 MN4014

    Tiger Motor T-Motor M8 CCW Prop Adapter Set for MN4010 MN4012 MN4014

    SKU: TMPAM8
    €12.00
    inc. VAT

     IN STOCK
  • Tiger MOTORS 15x5 Carbon Fiber Props (pair)

    Tiger MOTORS 15x5 Carbon Fiber Props (pair)

    Tiger Matched Pair props are specially designed for multi-rotors. The matched pair includes 1 CW (clock-wise "pusher") prop and 1 CCW (counter-clockwise) prop made of top quality lightweight carbon fiber. Select these props for the ultimate performance on your multi-rotor platform.

    SKU: P15X5
    €79.00
    inc. VAT

     IN STOCK

Manufacturers