Wide Angle 700TVL Mini FPV Camera with its 1/3" CMOS sensor that has been custom tuned for FPV use. This mini camera provides excellent video quality at low illumination and can be switched between NTSC and PAL as needed.
The provided wiring harness is ready to use and simply plugs into the camera.
Sensor: 1/3" CMOS, 700TVL
Horizontal Resolution: 700TVL
Lens: 2.6mm IR coated
Field of View: 127° diagonal 160° horizontal (ideal for a fixed camera)
Aluminum CNC Main & small Belt Pulley, LOGO500~690/SE/SX Series
The driving gear is made of top quality POM material,
integrated with high hardness of metal and abrasive resistance of plastics.Its shape and position hole benefit from simultaneous manufacturing with precision numerical control machines,
thus high precision and excellent concentricity are guaranteed.The metal rings are CNC precisely machined with 6061-T6 alloy. They are tightly embedded in the POM wheel, and fixed by several screws,
making the parts form a perfect unit with high strength, capable of large load capacity.CNC gear hobbing machine contributes to the high precision of driving gear,
and solves those problems found in stock plastic gear,
such as slippage phenomenon and beating problem.
This battery tray developed by Spedix can prevent battery from dropping out during flight, and makes it very convenient to install and to take out a battery. This tray is made of 3K pure carbon fiber plate and two pieces of 6061-T6 aluminum mounts, all processed by CNC machines. This large area carbon fiber tray provides enough room to mount battery. The specially designed metal mount fits a Logo plastic frame perfectly. There are two ways to install the battery tray in a helicopter. First, the front and rear mounts can both be fixed to a frame, so under no circumstance a battery will slip off. Motor and main gear can be easily changed through the holes on the tray without disassembling the battery tray. Secondly, if you prefer to take out the tray along with a battery, just install the front metal mount to a helicopter.
Fit Mikado Logo 500 -600 SE,SX Contains: 1x Carbon Battery Plate 2x Aluminum mounts 2x Screws(M2.5x5)
Spedix Carbon Fiber Main Frame Stiffener for Logo 500 / 600 / 600SE
This carbon fiber stiffener can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash. With multiple point fixation, the carbon fiber plates can help to distribute head impact force to the whole frame and to derease chances of damages in crashes. The carbon fieber parts are CNC precision cut from light and strong plates. The kit includes two carbon fiber plates, six set of hex screws and bolts.
Spedix Main Frame Stiffener Combo for Logo 500 / 600 / 600SE
This combo can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash. Metal pieces reinforce connections between landing skids and the main frame by transfering impact to stornger body parts. With multiple point fixation, the carbon fiber plates can help to distribute head impact force to the whole frame and to derease chances of damages in crashes. The carbon fieber parts are CNC precision cut from light and strong plates.
This combo includes aluminum (SPX92007) and carbon fiber (SPX93017) main frame stiffener kits, as shown in first photo. Both kits can be purchased seperately.
Spedix Aluminum Main Frame Stiffener for Logo 500 / 600 / 600SE
This aluminum stiffener can be used on Mikado Logo 500/600/600SE helicopters to protect the main frame from hard crash. Metal pieces reinforce connections between landing skids and the main frame by transfering impact to stornger body parts. Made of strong and light avaiation aluminum alloy.
Spedix standoff for flight controller board and power ditribution board. Package contains four sets of steel screws, polyamide nylon standoffs, and anodized aluminum nuts.
The total length of the standoff is 11mm, with the hex part of 5mm and screw part of 6mm.
This quad is build on a full carbon fiber frame, and the arms are reinforced with ESC covers.
The main controller is the same as S250. But this quad is equipped with the latest BLHeli_S program ESCs.
Settings of the quad are similar to S250, except Oneshot/multishot capability.
Light weight and agility design
Fully assembled and Programmed in factory
Ready to bind to DSMX radio and fly
700TVL camera and 40 channel VTX included
Naze Rev6 flight controller with integrated MinimOSD and Power Distribution Board LC Filter
Reinforced 2204 2300KV motors
BLHeli-S ESCs with OneShot and Multishot support
Programmable LED strip preinstalled on tail
DSMX compatible satellite receiver with binding button