Multicopter Tuning & Upgrades

Multicopter Tuning & Upgrades Please check full range on our partner site - www.aerofpv.com

Products


  • Multi copter Landing gear 250mm

    Multi copter Landing gear 250mm

    Foldable LANDING gear, made from Carbon, comes with special attachment for Camera mount

    Height, 250mm
    SKU: RCC250
    €99.00
    inc. VAT

     IN STOCK
  • Multi copter Landing gear 300mm

    Multi copter Landing gear 300mm

    Foldable LANDING gear, made from Carbon, comes with special attachment for Camera mount

    Height, 300mm
    SKU: RCC300
    €139.00
    inc. VAT

     LOW STOCK
  • Multi copter Landing gear 350mm

    Multi copter Landing gear 350mm

    Foldable LANDING gear, made from Carbon, comes with special attachment for Camera mount

    Height, 350mm
    SKU: RCC350
    €159.00
    inc. VAT

     LOW STOCK
  • Multicopter Collapsible GPS Antenna stand Mount

    Multicopter Collapsible GPS Antenna stand Mount

     Multicopter Collapsible GPS Antenna Mount

    •   Collapsible design
    •   Full set include GPS antenna mount, 4mm carbon fiber stick and base.
    •   Material: Aluminum
    •   High: 160mm
    •   Weight 19g
    SKU: 64012131
    €13.00
    inc. VAT

     IN STOCK
  • Multicopter Lightweight Retractable Landing gear set

    Multicopter Lightweight Retractable Landing gear set

    Produced in Europe, this Retractable landing gear will allow you full turn of 3 axis Gimbal without seen your Landing legs in Flight.

    Exceptional design with Ball  bearings mechanism, with only one servo operation, Full carbon fiber, make this gear set weight less than 330 Grams!: Means it wil not overload your current Drone!

    Operated by 2 X Savox Servos (Not included), with Locking mechanism when in Landing position makes it the most desired part.

    Tested with the weight of 40KG load.

    Completely Flat (when in flight)

    Specification:

    Weight: 350 gr

    • Base plate wideness: 30cm
    • Height : 45 cm (allows large gimbals, can be cut down)
    SKU: RETRACTMR
    €295.00
    inc. VAT

     LOW STOCK
  • One touch Antenna Stand

    One touch Antenna Stand

    One touch Antenna Stand

    Material: aluminum 6061-T6 (anodized) Body: Fits 25mm booms

    SKU: 6061-T6
    €34.00
    inc. VAT

     LOW STOCK
  • Prop Adaptor 4mm

    Prop Adaptor 4mm

    Machined from High-Quality Aluminum bar stock, it is designed to fit on a 4mm motor shaft, and has a 6mm threaded prop shaft.

    SKU: PRAD4
    €5.00
    inc. VAT

     IN STOCK
  • Prop Adaptor 5mm

    Prop Adaptor 5mm

    Machined from High-Quality Aluminum bar stock, it is designed to fit on a 5mm motor shaft, and has a 8mm threaded prop shaft.

    SKU: PRAD5
    €5.00
    inc. VAT

     IN STOCK
  • RealACC Carbon battery holder

    RealACC Carbon battery holder

    Battery Protection Board with Tie Down Strap
    Suitable for all fpv  Frame kit
    Board size: 64x34mm
    Tie Down Strap long: 200mm
    Weight: 8.55g

    Package Includes:
    1 X Battery Protection Board
    1 X Tie Down Strap

    SKU: 515656
    €4.99
    inc. VAT

     IN STOCK
  • Receiver antenna mount for all FPV, Helicopters

    Receiver antenna mount for all FPV, Helicopters

    Reciever antenna mount lets you cleanly fix your receiver antenna at the optimal 45deg vertical orientation for maximum range and reception.
    It can be taped or glued on any flat surface or turned around and clipped on to multi rotor frame board’s edge.
    The antenna tubes can be cut to any length and provide a secure safe way to vertically mount your antennas.

    Features: Dual mounting options flat or edge Optimal 45deg vertical mounting
    Can be used with any long antenna receiver Specs:
    Weight: 3g Size: 30x14mm
    Tube length: 100mm Availiable in Yellow transparent or Grey color

    SKU: SKU51782
    €2.00
    inc. VAT

     IN STOCK
  • Replacement boom

    Replacement boom

    Replacement boom 23cm
    Size: 230 x 15 x 15mm
    Thickness: 0.6-0.7mm
    Weight: 24.5g

    SKU: 50710
    €4.90
    inc. VAT

     IN STOCK
  • Replacement boom

    Replacement boom

    Replacement boom 33cm
    Size: 230 x 15 x 15mm
    Thickness: 0.6-0.7mm
    Weight: 24.5

    SKU: 50720
    €4.90
    inc. VAT

     IN STOCK
  • RJX 20º Motor Plastic Mount

    RJX 20º Motor Plastic Mount

    RJX 20º Motor Plastic Mount

    SKU: RJX-Q3079
    €2.50
    inc. VAT

     IN STOCK
  • RJX XT60 Aluminium housing

    RJX XT60 Aluminium housing

    RJX XT60 Alum Mounting housing

    SKU: RJX-Q3043
    €2.50
    inc. VAT

     IN STOCK
  • Silentblock M3x10mm set (4 pcs)

    Silentblock M3x10mm set (4 pcs)

    Silentblock M3x10mm set (4 pcs)

    Vibration dampener set for M3 threads.
    Suitable for installation of modules e. g. current supplies inside the model.
    The vibration dampeners ensure good cooling and vibration-free mounting.

    Specification:

    • Overall Size: L28mm x 3mm
    • Thread: M3
    • Diameter: 8mm
    • Color: Black
    • Weight: 2g.
    SKU: MCG0093
    €5.90
    inc. VAT

     IN STOCK
  • Sky hero Clamp (tuning part)

    Sky hero Clamp (tuning part)

    Aluminium made Clamp, for 30mm tubes.

    Allows simple installation and access to frame if disassembly needed- your Motor arms will not fall down.

    the clamp is 40mm high.

    Set of 1 clamp

    SKU: AVCLAMP
    €7.00
    inc. VAT

     IN STOCK
  • Sky hero Spy and Spyder tuning conversion Kit : Higher, Stronger,Simpler

    Sky hero Spy and Spyder tuning conversion Kit : Higher, Stronger,Simpler

    Sky hero Spyder 6 Tuning Conversion Kit is a set of Clamps and Spacers, Allowing you many benefits from the building process till the maintenance.

    What will you gain with this set?

    • Lightweight concept structure, increase the robustness of the frame structure.
    • Simple assembly, with this set- your motor arms will never fall down, even when you disasseble the main frame.
    • Easy access and maintenance of the machine, when disassemble process is needed.
    • Clamps will provide you much stronger support for heavy lift.
    • ABS made spacers will provide you with higher place inside the frame, allow installation of more components, especially in Spy and Spyder version.
    • Spacers are much stronger than originals. Holes will allow you easy wiring In and out where needed.
    • Better cooling in certain weather conditions.
    • Virtually unbreakable parts! tested in stress and crash test.

    What is included?

    - Based on the version of the machine, e.g Spy or Spyder 4/6  you will get complete set of Spacers, and Clamps needed to replace your current parts.

    • Spy :Set of 3 Spacers, 6 clamps, Hardware
    • Spyder 4/8 :  Set of 5 Spacers, 8 clamps, Hardware
    • Spyder 6 : Set of 6 Spacers, 12 clamps, Hardware

    Hardware included.

    - Note- we recommend this kit for " Handy people" and assemblers of drones.
    - You will need to drill some extra holes for the clamps.

     

    SKU: SPTune
    €69.00
    inc. VAT

     IN STOCK
  • Stand off 10mm

    Stand off 10mm

    Material: AL6061
    Length: 10mm
    Bolt Hole Size Dia 3.5mm
    4 per package
    SKU: AL6073
    €5.00
    inc. VAT

     IN STOCK
  • Stand off 15mm

    Stand off 15mm

    Material: AL6061
    Length: 15mm
    Bolt Hole Size Dia 3.5mm
    4 per package
    SKU: AL6072
    €5.00
    inc. VAT

     IN STOCK
  • Stand off 20mm

    Stand off 20mm

    Material: AL6061
    Length: 20mm
    Bolt Hole Size Dia 3.5mm
    4 per package
    SKU: AL6074
    €5.00
    inc. VAT

     LOW STOCK
  • Waterproof LED Strip 60 leds/meter

    Waterproof LED Strip 60 leds/meter

    Silicon Tube IP67 Flexible LED Strip 1 METER, 60leds/meter 5050 Waterproof LED
    Choice of colors: Red, Yellow, Green, Blue, White
    Easy to glue, flexible, weather Proof

    Description:

    •   Silicone tube encased waterproof IP67
    •   5050 SMD LED as the light source
    •   High Brightness, All single color
    •   High luminance efficient and low power consumption
    •   Easy Installation, 3M self adhesive tape in backside
    •   The flexible LED strip can be divided by every three leds
    •   Long Life over 50, 000 hours of usable life
    •   CE RoHS compliant
    •   With 2~3 Year Warranty

    Specifications:

    •   Dimension: 1 meter, 8mm wide
    •   LED Chip:  5050 SMD TOP LED
    •   LED Quantity: 60pcs/meter
    •   Material: FPC + Silicone
    •   Beam Angle: >120°
    •   Working Voltage: DC11V - DC24V
    •   Rated Power: 14.4W/m
    SKU: WTPwhite
    €9.00
    inc. VAT

     IN STOCK
  • X650-V4 Top Dome

    X650-V4 Top Dome

    Dome for Multicopters, can be used on almost any machine from 450 mm.

    SKU: SKU46407
    €12.00
    inc. VAT

     IN STOCK
  • XT60 connector panel mount (1 set)

    XT60 connector panel mount (1 set)

    XT60 connector panel mount (1 set)

    SKU: XT60-02202A
    €5.00
    inc. VAT

  • XT90 Plug Connector Holder

    XT90 Plug Connector Holder

    XT90 Plug Connector Holder

    SKU: XT90-2205
    €3.00
    inc. VAT

     IN STOCK

Manufacturers

Back