This is the size and weight savings, while still obtaining good performance.
The FX795T-2 support full range of 40 channels and only weighs 7.5g.
It’s perfect for a wide range of FPV racing aircraft, especially small FPV racing models and FPV racing multicoptors.
The new Antislip Battery Lock Straps feature a Patented anti slip material in the inside surface that securely locks your battery in place and prevents them from slipping, during extreme maneuvers, racings, crashes.
These straps are made from heavy duty nylon Velcro material and perfect for FPV racers and applications where you need to secure 3-4 s Lipo.
Theis is the new Lock Strap feature a Patented anti slip material in the inside surface that securely locks your battery in place and prevents them from slipping, during extreme maneuvers. This strap is made for large applications, e.g lipos of 16000mah and over. also possible to attach 2 lipos in this size with one strap.
Those straps are made from heavy duty nylon, with special antislip material, stiched with Kevlar wire for strongest application possible and heavy loads of up to 8g forces.
use on large UAV, Multicopters and more.
Strap measures 620 mm long and 50mm wide, so they will also catch lipos from 6-12000mah without any problem.
The new XL Lock Straps feature a Patented anti slip material in the inside surface that securely locks your battery in place and prevents them from slipping, during extreme maneuvers.
These large size straps are made from heavy duty nylon Velcro material and perfect for 500 to 800 class electric helicopters or larger RC Aircraft.
Strap measures 25 X 450 mm, so they will also catch lipos from 6-8S 5000-8000mah without any problem.
Each package contains 3 Velcro straps
Carbon Fiber 3k tube in Matt finish. size : 20 mm OD, 18mm ID, Length of 1 meter.
Can be used as replacement for Boom, Sky hero tubes and more.
Specifications:
Size:20mm out diameter 18mm inner diameter
Length: 900mm
100% Carbon Fiber
Quantity: 1 tube
Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!please advise +- the size how you want them cut, example 50/50cm, 30-70...
Carbon Fiber electronic retractable landing gear for DJI Phantom
Product Description:
Simple structure, easy to assemble
No serious vibration during flight
Applicable to DJI Phantom, F550. and other multi-copters.
Please use a separate radio when use this product with Phantom because Phantom's transmitter does not have spare channel to control the retractable landing gear.
Weight: 190G
Working Voltage: 4.6-7.2V
Note:
DO NOT connect to the flight controller directly. It will cause damage to the flight controller.
Best Arm in terms of quality, made 100% in Europe from 6061 Aluminium, the tube itself is made from Carbon. The inserts fits and secures the arm, which allows the part to be solid as rock. The base insert (the part which connecting to the quad), allows the arm to be easily retracted. The motor mount with its very unique design, allows single or double coaxial motor mounting with a special reinforced cnc part inside.
This unit was tested with over 30kg of force for a long time, to show how strong it is.
Colored Carbon fiber tube 30x28mm, 1000mm long, choice of White or Light Yellow color.
Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.
Carbon Fiber 3k tube in White or Light Yellow color. Size : 20 mm OD, 18mm ID, Length of 1 meter. Can be used as replacement for Boom, Sky hero tubes and more.
Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!please advise +- the size how you want them cut, example 50/50cm, 30-70...
Colored Carbon fiber tube 30x28mm, 1000mm long, choice of White or Light Yellow color. Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.
Carbon Fiber 3k tube in Color finish Size : 30 mm OD,28mm ID, Length of 1 meter. Can be used as replacement for Boom, Sky hero tubes and more.
Specifications:
Size:30mm out diameter 28mm inner diameter
Length: 1000mm
100% Carbon Fiber
Quantity: 1pc
Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible! please advise +- the size how you want them cut, example 50/50cm, 30-70...
Electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that are designed to accept 10mm wire legs and is suitable for models with a maximum weight of 20kg.
These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.
Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.
This electric retract range is designed to keep retract installations simple and reliable with great value for money. The electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that have pre-installed 5mm diameter studs for use with oleo legs and is suitable for models with a maximum weight of 10kg.
These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.
Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.
Specifications:
Leg Wire: 5mm
Max Weight: 10Kg
MountPlate: 44 x 51
Stall Current: 2.1 to 3A
Weight: 92g
Voltage: 4.8 - 7.4v
Dimensions: 92 x51 x 31
Gear Type: metal
Torque: 15.50 kg/cm-4.8v
Torque: 20.60 kg/cm-7.4v
Speed: 6.00 secs-4.8v
Speed: 4.00 secs-7.0v
Type: digital
Please check full range on our partner site - www.aerofpv.com 
