Sky-Hero

Sky hero New Pancake motor frame ,Black color

Reinforced, with better support for screws, fits up to 53mm pancake motors

Included 1 arm (half)

Sky-Hero OB1 COMBO 4" (Dia.175mm)

OB1 features:

Lighter
Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

Faster

The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

Stronger
The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

Others:

• The 15°>70° adjustable camera angle caters for different pilot profiles.
• The flexible ESC location (over or under arms) providing a tuned frame for every FPV

Racer's needs:

• Free 3D Printable Spare Parts by visiting thingiverse.com  / SkyHero3D
• Lipo 3 to 4S 1300mAh
• Camera 600TVL
• VTX 25mw

What's included?

• Cables protection Club Racer (4pc)
• Main frame set OB1
• Side frame OB1
• Front Arm OB1
• Rear Arm OB1
• Aluminium Spacers
• Screw Set OB1
• XNova Motor 2204-2600Kv x 4
• OneShot125 20A x 4
• Bullnose Props 3 blades 4x4.5x3
• CC3D Atom
• PDB: MPDB5V12V

Note that the canopy is not included!

Sky-Hero OB1 Nacked frame 4" (Dia.175mm)

OB1 features:

Lighter
Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

Faster

The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

Stronger
The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

Others:

• The 15°>70° adjustable camera angle caters for different pilot profiles.
• The flexible ESC location (over or under arms) providing a tuned frame for every FPV

Racer's needs:

• Free 3D Printable Spare Parts by visiting thingiverse.com  / SkyHero3D
• Motor 2204-2600 to 2700 kv
• ESC 20A (Littlebee or similar)
• Props 3 blades 4x4.5x3
• Lipo 3 to 4S 1300mAh
• CC3D Atom
• PDB: MPDB5V12V or PDB-LDO

What's included?

• Cables protection Club Racer (4pc)
• Main frame set OB1
• Side frame OB1
• Front Arm OB1
• Rear Arm OB1
• Aluminium Spacers
• Screw Set OB1

Note that the canopy is not included!

Comes in our gorgeous smoke green color.

Including in the set:

• 3 complete Motor arm sets (6 halves)
• Smoke green T-nuts (2pcs)
• Spacers (3pcs)
• Inserts (3pcs)
• Landing gear holders (all white replaced with new reinforced smoke green color)

Transform any sky-hero to a new Pancake version, accept motors up to 53 mm.

Pancake Conversion set Spyder 6 (only motor frame)

Comes in our gorgeous smoke green color.

Including :

• 6 complete Motor arm sets( 12 halves).

Motor/ Hardware not included.
Transform any sky-hero to a new Pancake version, accept motors up to 53 mm.

Sky-Hero Quick Release Knob Spy and Spyder drones

1 pcs in set

Sky hero New, redesigned, and reinforced Motor frame Black color for motors 35mm

Better screw insert, More Fiber material, make this product stronger.
Included: 1 Half arm.

Sky-Hero SCREW SET OB1

This is the Speed version of Sky hero Spy 600, flying speed is 140+KMH

This product is not for beginners, it is very fast, and maneuverable!

Combo delivered with the following:   

•   1 x Sky hero spy 600 Frame
•   6 x Avizar MC3536 speed motors
•   6 x Speed version of ESC 40A SimonK programmed,Fits inside the arms.
•   6 x Fully balanced Reinforced Speed props
•   1 x Power distribution Board 80amp
•   1 x Optional- Painted canopy

To complete the combo you will need your radio, Flight controller, and 6S Lipo battery.

We recommending Flight controller such as Pixhawk, Naza. if you plan to use it for speed only, GPS is not a must.

Check the Videos of Spy speed as used by Sky hero team using our Combos

Spy upscale kit 900 mm

This kit included Full set of 4 Arms to increase size from Spy 600 to 900mm.

New Innovative design Drones, Produced in Belgium. this machine is 1000mm wide, Delivered with White color canopy

We are offering also Combos, depends on your Flying weight demand. mail us for Offer

•     2 mm carbon fiber main frame plates = stronger
•     30 mm carbon fiber booms = ESC inside
•     Injected motor mounts = reliable
•     Flight controller between the frame plates =protected
•     Pre-drilled for 45x45 flight controller patterns = easy
•     28 mm to 36 mm motor size = choice is yours
•     INERTiC camera mounts = no jelly
•     20 mm carbon fiber landing poles = stable
•     600, 800 or 900 mm size = choice is yours again
•     Y6 shape = enjoy windy days

Frame not including any of electronics