Sky-Hero Spy/Spyder Spares

Sky-Hero Spy/Spyder Spares

 Spare parts for Sky-Hero machines

Products


  • Mini PDB sky hero

    Mini PDB sky hero

    Mini PDB sky hero, Connector XT60 comes not soldered, for the option to have it on the pdb or connected with the wire

    SKU: SKH04-OB1
    €6.50
    inc. VAT

     IN STOCK
  • Multicopter Lightweight Retractable Landing gear set

    Multicopter Lightweight Retractable Landing gear set

    Produced in Europe, this Retractable landing gear will allow you full turn of 3 axis Gimbal without seen your Landing legs in Flight.

    Exceptional design with Ball  bearings mechanism, with only one servo operation, Full carbon fiber, make this gear set weight less than 330 Grams!: Means it wil not overload your current Drone!

    Operated by 2 X Savox Servos (Not included), with Locking mechanism when in Landing position makes it the most desired part.

    Tested with the weight of 40KG load.

    Completely Flat (when in flight)

    Specification:

    Weight: 350 gr

    • Base plate wideness: 30cm
    • Height : 45 cm (allows large gimbals, can be cut down)
    SKU: RETRACTMR
    €295.00
    inc. VAT

     LOW STOCK
  • Prop Shaft for SKY-HERO Motor 2806

    Prop Shaft for SKY-HERO Motor 2806

    Prop Shaft for SKY-HERO Motor 2806

    SKU: SKH04-002
    €4.00
    inc. VAT

     IN STOCK
  • Purflame Fiberglass canopy Sky hero Spy (Purple-Pink)

    Purflame Fiberglass canopy Sky hero Spy (Purple-Pink)

    Purflame  Airbrush Fiberglass Canopy Sky Hero Spy

    Be different with our new canopy specially designed for Sky Hero Spy. A whole new look and more visibility for your copter with a cool design at a affordable price. Dont be the same, be different .
    Fly it your style.
     
    Fusuno canopies are made with highest quality resin and fiberglass material to provide strong but flexible canopies. It helps prevent cracks that is normally seen in other canopies that are using lower quality material. All paints and clear coat are automobile grade provide great look, Great design at bargain price.

    SKU: FUC-SPY-002
    €59.00
    inc. VAT

     IN STOCK
  • Sky hero 12V, 1A Step-Down Voltage Regulator

    Sky hero 12V, 1A Step-Down Voltage Regulator

    The compact (12x18mm ) synchronous voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 1 A. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 12 V

    SKU: SKH04-054
    €9.90
    inc. VAT

     IN STOCK
  • Sky Hero 13x6.5 Carbon Propeller Set (2)

    Sky Hero 13x6.5 Carbon Propeller Set (2)

    This is a replacement pack of two Sky-Hero Carbon Propellers. These props are constructed of 2K carbon fiber and BEST for use with Sky-Hero platforms.

    Includes: (1) CW 13x6.5 2K Carbon Prop (1) CCW 13x6.5 2K Carbon Prop

    SKU: SKH04-005-13
    €16.00
    inc. VAT

     IN STOCK
  • Sky Hero Battery Strap 2 pcs

    Sky Hero Battery Strap 2 pcs

    This is a pack of two replacement Sky-Hero Battery Straps. These battery straps feature genuine Sky-Hero branded material and are compatible with the Spyder and Spy aircraft. Fit 4-6 s LIPOS

    2pcs  in set

    SKU: SKH08-003
    €6.00
    inc. VAT

     IN STOCK
  • Sky hero Clamp (tuning part)

    Sky hero Clamp (tuning part)

    Aluminium made Clamp, for 30mm tubes.

    Allows simple installation and access to frame if disassembly needed- your Motor arms will not fall down.

    the clamp is 40mm high.

    Set of 1 clamp

    SKU: AVCLAMP
    €7.00
    inc. VAT

     IN STOCK
  • Sky Hero Little Spyder Sticker Set Black and White

    Sky Hero Little Spyder Sticker Set Black and White

    Set of Vynil Stickers for Sky hero Little Spyder Black and White pattern. made from High quality Vynil

    SKU: LSBW
    €5.00
    inc. VAT

     IN STOCK
  • Sky Hero Little Spyder Sticker Set Camouflage

    Sky Hero Little Spyder Sticker Set Camouflage

    Set of Vynil Stickers for Sky hero Little Spyder  Camouflage pattern. made from High quality Vynil

    SKU: LSCAMO
    €5.00
    inc. VAT

     IN STOCK
  • Sky Hero Little Spyder Sticker Set Camouflage 1

    Sky Hero Little Spyder Sticker Set Camouflage 1

    Set of Vynil Stickers for Sky hero Little Spyder  Camouflage pattern. made from High quality Vynil

    SKU: LSCAMO1
    €5.00
    inc. VAT

     IN STOCK
  • Sky Hero Little Spyder Sticker Set CARBON PATTERN

    Sky Hero Little Spyder Sticker Set CARBON PATTERN

    Set of Vynil Stickers for Sky hero Little Spyder  CARBON pattern. made from High quality Vynil

    SKU: LSCARBON
    €5.00
    inc. VAT

     IN STOCK
  • Sky Hero Little Spyder Sticker Set RED BULL

    Sky Hero Little Spyder Sticker Set RED BULL

    Set of Vynil Stickers for Sky hero Little Spyder RED BULL pattern. made from High quality Vynil

    SKU: LSRED
    €5.00
    inc. VAT

     IN STOCK
  • Sky Hero Little Spyder Sticker Set USA

    Sky Hero Little Spyder Sticker Set USA

    Set of Vynil Stickers for Sky hero Little Spyder  USA FLAG pattern. made from High quality Vynil

    SKU: LSUSA
    €5.00
    inc. VAT

     IN STOCK
  • Sky Hero Long canopy Spyder 6

    Sky Hero Long canopy Spyder 6

    Sky Hero Long canopy Spyder 6, Smoke green color

    SKU: SKH05-0033-LG
    €39.90
    inc. VAT

     IN STOCK
  • Sky Hero Long canopy Spyder 6 BLACK edition

    Sky Hero Long canopy Spyder 6 BLACK edition

    Sky Hero Long canopy Spyder 6, Smoke Black color

    SKU: SKH05-0033-bk
    €39.90
    inc. VAT

     IN STOCK
    NEW
  • Sky Hero Spy & Spyder Motor Mount WHITE Color, Reinforced

    Sky Hero Spy & Spyder Motor Mount WHITE Color, Reinforced

    Sky hero Spy & Spyder Motor Mount, White color

    Included- 1 half arm

    SKU: SKH01-005
    €6.90
    inc. VAT

     IN STOCK
  • Sky hero Spy and Spyder tuning conversion Kit : Higher, Stronger,Simpler

    Sky hero Spy and Spyder tuning conversion Kit : Higher, Stronger,Simpler

    Sky hero Spyder 6 Tuning Conversion Kit is a set of Clamps and Spacers, Allowing you many benefits from the building process till the maintenance.

    What will you gain with this set?

    • Lightweight concept structure, increase the robustness of the frame structure.
    • Simple assembly, with this set- your motor arms will never fall down, even when you disasseble the main frame.
    • Easy access and maintenance of the machine, when disassemble process is needed.
    • Clamps will provide you much stronger support for heavy lift.
    • ABS made spacers will provide you with higher place inside the frame, allow installation of more components, especially in Spy and Spyder version.
    • Spacers are much stronger than originals. Holes will allow you easy wiring In and out where needed.
    • Better cooling in certain weather conditions.
    • Virtually unbreakable parts! tested in stress and crash test.

    What is included?

    - Based on the version of the machine, e.g Spy or Spyder 4/6  you will get complete set of Spacers, and Clamps needed to replace your current parts.

    • Spy :Set of 3 Spacers, 6 clamps, Hardware
    • Spyder 4/8 :  Set of 5 Spacers, 8 clamps, Hardware
    • Spyder 6 : Set of 6 Spacers, 12 clamps, Hardware

    Hardware included.

    - Note- we recommend this kit for " Handy people" and assemblers of drones.
    - You will need to drill some extra holes for the clamps.

     

    SKU: SPTune
    €69.00
    inc. VAT

     LOW STOCK
  • Sky Hero Spy Easy Access Lightened Main Frame

    Sky Hero Spy Easy Access Lightened Main Frame

    Sky Hero Spy Easy Access Lightened Main Frame
    SKU: SKH08-005
    €19.90
    inc. VAT

     IN STOCK
  • Sky Hero Spyder 6 Fastener Set

    Sky Hero Spyder 6 Fastener Set

    Sky Hero Spyder 6 Fastener Set

     

    SKU: SKH07-106
    €30.00
    inc. VAT

     IN STOCK
  • SKY Hero Spyder Combo Upgrade

    SKY Hero Spyder Combo Upgrade

    This is an upgrade ( electronics set) for Sky hero Spyder. (Frame is Not included)

    Combo available in 3 versions:

    Combo 4:  4 motors, 4 esc, 2 sets of CF props, Wire set

    Combo 5:  4 motors, 4 esc, 2 sets of CF props, Wire set, Pixhawk

    Combo 6:  4 motors, 4 esc, 2 sets of CF props, Wire set, Wookong M

     

    SKU: SKH09-400-01
    €360.00
    inc. VAT

     LOW STOCK
  • Sky Hero Spyder Wiring Harness set

    Sky Hero Spyder Wiring Harness set

    Sky Hero Spyder Wiring Harness - X4 or X8/ Little spy/der

    Sky Hero makes it easy when utilizing multiple motor applications with your Sky Hero kit, allowing up to (5) ESC's to be attached to this wire harness. No power distribution board is needed when utilizing this wire set, allowing multiple ESC's to be connected in quick fashion, without fuss.

    Designed to be used with Sky Hero's line of ESC's, the Sky Hero ESC's feature pre soldered bullet connectors on the power terminal allowing the ESC's to be easily plugged into this wiring harness. Once the positive & negative wires of the ESC's are connected to this harness, you simply connect the motors to the ESC's, and you are finished.

    This wire harness features bare leads on the battery terminal end (main positive & negative terminals), allowing use of a connector of your choice.

    Includes:

    • (1) Red-Positive Side Wire Harness with 3.5mm female connector soldered
    • (1) Black- Negative Side Wire Harness with 3.5mm female connector soldered

    Application:

    • Sky Hero all models.
    SKU: SKH04-004
    €9.90
    inc. VAT

     IN STOCK
  • Sky hero T6 Aluminium Motor wedges set

    Sky hero T6 Aluminium Motor wedges set

    Sky hero Motor wedges set, Made from Aluminium T6, allow motors to be angles 10-20 Degrees.

    Set of 4.

    Instructions can be found at THIS LINK , please note  as well, that if you install the Naza/Wkm, you need to install it on same angle as the motors for proper operation. Most of other controlers doesnt need to be installed under angle.

    SKU: SKH08-45
    €12.90
    inc. VAT

     72HR STOCK
  • Sky Hero Wiring Harness - Spy Series / SPYDER6

    Sky Hero Wiring Harness - Spy Series / SPYDER6

    Sky Hero Spy / SPYDER6 Wiring Harness

    Sky Hero makes it easy when utilizing multiple motor applications with your Sky Hero kit, allowing up to (7) ESC's to be attached to this wire harness. No power distribution board is needed when utilizing this wire set, allowing multiple ESC's to be connected in quick fashion, without fuss.

    Designed to be used with Sky Hero's line of ESC's, the Sky Hero ESC's feature pre soldered bullet connectors on the power terminal allowing the ESC's to be easily plugged into this wiring harness. Once the positive & negative wires of the ESC's are connected to this harness, you simply connect the motors to the ESC's, and you are finished.

    This wire harness features bare leads on the battery terminal end (main positive & negative terminals), allowing use of a connector of your choice.

    Includes:

    (1) Positive Side Wire Harness
    (1) Negative Side Wire Harness

    Application:

    Sky Hero Spy or SPYDER6

    Usage:

    (1) Set Necessary for Spy Series / (2) Sets Necessary for SPYDER6

    SKU: SKH04-006
    €19.90
    inc. VAT

     IN STOCK

Manufacturers

Back