Sky-Hero Spy/Spyder Spares

Sky-Hero Spy/Spyder Spares

 Spare parts for Sky-Hero machines

Products


  •  Sky-Hero Little Spyder Fastener set

    Sky-Hero Little Spyder Fastener set

     Sky-Hero Little Spyder Fastener set

    SKU: SKH07-110
    €29.90
    inc. VAT

     IN STOCK
  • ABS Spacer for Sky hero tuning

    ABS Spacer for Sky hero tuning

    This is the ABS material Spacer for Sky hero machines. it is higher (40mm) and usually used with Clamp (avclamp) as a set.

    1 Spacer is in the set

    SKU: AVSPACER
    €6.90
    inc. VAT

     IN STOCK
  • Angles Banked Motor Mounts for Little Spyder

    Angles Banked Motor Mounts for Little Spyder

    Want to fly faster or make motors angled , we have the solution, from Sky hero. set of 4 CNC metal mounts, you can adjust motor angle
    SKU: SKH-LS-ANG
    €13.00
    inc. VAT

     LOW STOCK
  • Arm set Sky hero Little six

    Arm set Sky hero Little six

    Kit of 6 tubes for Little Six Sky hero

    SKU: SKH03-065
    €29.00
    inc. VAT

     IN STOCK
  • Arm Wire Guards Sky hero

    Arm Wire Guards Sky hero

    Those are the guards to keep the wires safe when folding arms.

    the Guards made from SPECIAL RUBBER which will protect your esc/motor wires when folding/unfolding the machines.

    Guards comes in set of 8 pcs to fit Spyder( each arm need 2 pcs to be inserted) or as set of 6 pcs for Spy.

    Guards fit all machines of Sky hero.

    Instructions: add some contact glue or silicone glue and insert the guard inside the arm.

    SKU: SHGUARDS
    €9.00
    inc. VAT

     IN STOCK
  • Avizar Combo Upgrade for SKY Hero Spyder, Spy, Spyder 6

    Avizar Combo Upgrade for SKY Hero Spyder, Spy, Spyder 6

    This is an upgrade ( electronics set) for Sky hero Spyder and Spy (Frame is Not included)

    Combo available in Different versions and will include:

    Combo 1 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, No Flight controller
    Combo 3 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, DJI A2
    Combo 4 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, APM 2.8, GPS
    Combo 5 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, Pixhawk, GPS

    Combos below can be used for Spy and Spyder 6

    Combo 6 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, No Flight controller
    Combo 8 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, DJI A2
    Combo 9 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, APM 2.8, GPS
    Combo 10 For Spy:6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, Pixhawk, GPS

    SKU: AV09-4NFC
    €360.00
    inc. VAT

     IN STOCK
  • Avizar XXL aftermarket Inertic Long mount for Spyder

    Avizar XXL aftermarket Inertic Long mount for Spyder

    Special design, XXL Aftermarket Inertic bottom plate for Spyder.
    This inertic mount was created after research and opportunity to improve and ease of use for Mounting, allow easier adjustment  CG of Sky hero Spyder

    • Made from 3.0mm Carbon reinforced FRP material, make this mount plate resistant to Shocks, and very rigid.
    • Wider : Allows mounting of 2x 6s 5000-6000 Lipos side by side without touching the screws.
    • Longer plate : 37 CM - allows perfect CG with or without gimbal, use with 1 or 2 lipo packs
    • Forward Side mounting holes: For easy gimbal mounting direct, or on tubes of Xaircraft type
    • Back Holes for GPS mounting, or FPV TX.

    To use this plate in current Spyder you will need to make some 4mm holes in the bottom plate of Spyder.

    SKU: AV03-Inertic-Spyder
    €41.00
    inc. VAT

     IN STOCK
  • Camera Plate Sky hero Little Six hexacopter

    Camera Plate Sky hero Little Six hexacopter

    Camera Plate Sky hero Little Six hexacopter
    SKU: SKH03-011
    €13.00
    inc. VAT

     IN STOCK
  • Carbon 3k tube 20x18mm, Matte finish 900mm long

    Carbon 3k tube 20x18mm, Matte finish 900mm long

    Carbon Fiber 3k tube in Matt finish. size : 20 mm OD, 18mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    • Size:20mm out diameter 18mm inner diameter
    • Length: 900mm
    • 100% Carbon Fiber
    • Quantity: 1 tube

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-2018
    €18.00
    inc. VAT

     IN STOCK
  • Carbon 3K Weave matte fibre tube 15x13mm ,1000mm long

    Carbon 3K Weave matte fibre tube 15x13mm ,1000mm long

    Carbon Fiber 3k tube in Matt finish. size : 15 mm OD, 13mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:15mm out diameter 13mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc
    SKU: RCMC-1513
    €16.00
    inc. VAT

     IN STOCK
  • Carbon 3K Weave matte fibre tube 8x6mm ,900mm long

    Carbon 3K Weave matte fibre tube 8x6mm ,900mm long

    Carbon Fiber 3k tube in Matt finish. size : 8 mm OD, 6mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:8mm out diameter 6mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc
    SKU: RCMC-0806
    €10.90
    inc. VAT

     IN STOCK
  • Carbon tube 30x28 1000mm Matt finish

    Carbon tube 30x28 1000mm Matt finish

    Carbon Fiber 3k tube in Matt finish. size : 30 mm OD,28mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:30mm out diameter 28mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-3028
    €29.00
    inc. VAT

     IN STOCK
  • Carbon tube 40X37mm 1000mm long Matt finish

    Carbon tube 40X37mm 1000mm long Matt finish

    Carbon Fiber 3k tube in Matt finish. size : 40 mm OD,37 mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Multicopter tube, and more

    Specifications:

    •   Size:40mm out diameter 37mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-4037
    €39.00
    inc. VAT

     LOW STOCK
  • CNC Aluminium Landing gear T-mount upgrade for Sky hero

    CNC Aluminium Landing gear T-mount upgrade for Sky hero

    CNC Aluminum Landing gear T-mount, to connect 15mm Skid tube with 20mm Landing gear.

    An upgrade for Sky hero, possibly fit other machines.

    Included 1 pc, Red color, with Screws.


    SKU: ST-2025R
    €27.00
    inc. VAT

     LOW STOCK
  • Colored finish Carbon fiber tube 30x28mm, 1000mm long

    Colored finish Carbon fiber tube 30x28mm, 1000mm long

    Colored Carbon fiber tube 30x28mm, 1000mm long, choice of White or Light Yellow color.
    Those colored tubes will reject Heat compared to carbon one and will be 40-55% less hot.

    Carbon Fiber 3k tube in Color finish
    Size : 30 mm OD,28mm ID, Length of 1 meter.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:30mm out diameter 28mm inner diameter
    •   Length: 1000mm
    •   100% Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!
    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-3028WHITE
    €32.00
    inc. VAT

     IN STOCK
  • Kylin CNC aluminium Motor mount set 37mm, RED

    Kylin CNC aluminium Motor mount set 37mm, RED

    CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

    Fit motors up to 37mm in diameter.

    Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
    Double arm, e.g fits co-axial configuration.

    Providing perfect Cooling:By conducting heat, and from ventilated design.

    An upgrade for Sky hero, possibly fit other machines.

    Included :

    • 2 Half Arms, Made from CNC aluminum,
    • Screws
    SKU: AA-3037R
    €42.00
    inc. VAT

     IN STOCK
  • Kylin CNC aluminium Motor mount set 37mm, Silver

    Kylin CNC aluminium Motor mount set 37mm, Silver

    CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

    Fit motors up to 37mm in diameter.

    Weight is  approx 57 grams, compared to Pancake arm set( 76gr)
    Double arm, e.g fits co-axial configuration.

    Providing perfect Cooling:By conducting heat, and from ventilated design.

    An upgrade for Sky hero, possibly fit other machines.

    Included :

    • 2 Half Arms, Made from CNC aluminum,
    • Screws
    SKU: AA-3037S
    €42.00
    inc. VAT

     IN STOCK
  • Kylin CNC aluminium Motor mount set 55mm, Silver

    Kylin CNC aluminium Motor mount set 55mm, Silver

    CNC Aluminum Motor mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

    Fit motors up to 55mm in diameter.
    Double arm, e.g fits co-axial configuration.

    Providing perfect Cooling:By conducting heat, and from ventilated design.

    An upgrade for Sky hero, possibly fit other machines.

    Included :

    • 2 Half Arms, Made from CNC aluminum,
    • Screws
    SKU: AA-3055S
    €53.00
    inc. VAT

     IN STOCK
  • Kylin CNC aluminium Motor-Esc mount set 55mm, Silver

    Kylin CNC aluminium Motor-Esc mount set 55mm, Silver

    CNC Aluminum Motor and ESC mount for Multirotors arms, Fits 30mm tubes. Designed for Sky hero models, however fits any other 30mm tube arms.

    Fit motors up to 55mm in diameter. Esc of 50 amps can be mounted under the motor.
    Single Motor configuration Motor mount

    Providing perfect Cooling:By conducting heat, and from ventilated design.

    An upgrade for Sky hero, possibly fit other machines.

    Included :

    • 1 Motor Half frame, Made from CNC aluminum
    • 1 ESC lower frame, CNC made
    • Screws
    SKU: AB-3055S
    €53.00
    inc. VAT

  • MAIN FRAME SPYDER 6 complete set

    MAIN FRAME SPYDER 6 complete set

    MAIN FRAME SPYDER 6 complete set,
    2 frames+ inertic
    SKU: SKH03-004-F
    €79.00
    inc. VAT

     IN STOCK
  • Mini PDB sky hero

    Mini PDB sky hero

    Mini PDB sky hero, Connector XT60 comes not soldered, for the option to have it on the pdb or connected with the wire

    SKU: SKH04-OB1
    €6.50
    inc. VAT

     IN STOCK
  • Multicopter Lightweight Retractable Landing gear set

    Multicopter Lightweight Retractable Landing gear set

    Produced in Europe, this Retractable landing gear will allow you full turn of 3 axis Gimbal without seen your Landing legs in Flight.

    Exceptional design with Ball  bearings mechanism, with only one servo operation, Full carbon fiber, make this gear set weight less than 330 Grams!: Means it wil not overload your current Drone!

    Operated by 2 X Savox Servos (Not included), with Locking mechanism when in Landing position makes it the most desired part.

    Tested with the weight of 40KG load.

    Completely Flat (when in flight)

    Specification:

    Weight: 350 gr

    • Base plate wideness: 30cm
    • Height : 45 cm (allows large gimbals, can be cut down)
    SKU: RETRACTMR
    €295.00
    inc. VAT

     LOW STOCK
  • Prop Shaft for SKY-HERO Motor 2806

    Prop Shaft for SKY-HERO Motor 2806

    Prop Shaft for SKY-HERO Motor 2806

    SKU: SKH04-002
    €4.50
    inc. VAT

     IN STOCK
  • PULLWINDING Carbon tube 30x27 1000mm - Extra strong

    PULLWINDING Carbon tube 30x27 1000mm - Extra strong

    Tube is a very high quality glassfibre and carbon fibre tube made with Pullwinding production technology. The material of the tube in question is a mix of glassfibre, carbon fibre and epoxy.
    The tube is light weight, strong and stiff and is well suited for demanding applications.
    The outer diameter of the tube is 30 mm and inner diameter 27 mm. Length of the tube is 100 cm and the color is black.
    Can be used as replacement for Boom, Sky hero tubes and more.

    Specifications:

    •   Size:30mm out diameter 27mm inner diameter
    •   Length: 1000mm
    •   HYBRID Carbon Fiber
    •   Quantity: 1pc

    Shipping limitations( because of some shippers can not ship 1m long packages, we propose to cut the tubes- if possible!

    please advise +- the size how you want them cut, example 50/50cm, 30-70...

    SKU: RCMC-3027
    €49.00
    inc. VAT


Manufacturers

Back