Scorpion

Scorpion
RCmarket choosen to distribute this Finest line of Speed controllers and motors. Best quality product your Money can buy

Products


  • Scorpion HK-40 C-Clip Kit factory replacement C-Clip

    Scorpion HK-40 C-Clip Kit factory replacement C-Clip

    Scorpion HK-40 C-Clip Kit factory replacement C-Clip

    The Scorpion HK-40 C-Clip Kit are the factory replacement C-Clip, washers & set screw HK-4020, HK-4025, HK-4035 & all HKIII-40 Series Helicopter Motors. (Except HK-4015)

    Included in the Box:

    • 4 x C-Clips
    • 4 x Set Screws
    • 4 x Washers
    SKU: HK-40C-CLIP-KIT1
    €2.50
    inc. VAT

     IN STOCK
  • Scorpion HK-40 Motor Bearing Kit

    Scorpion HK-40 Motor Bearing Kit

    Scorpion HK-40 Motor Bearing Kit.


    In order to keep your motor in top running condition, you need a good set of bearings. Occasionally, after a crash or landing in the dirt, the bearings can become damaged and need to be replaced.
    The Scorpion HK-40mm Motor Bearing Kit includes a pair of original equipment replacement bearings to fit the Scorpion HK-40 & HKIII-40 Series motors.(Except HK-4015)

    Please note, the bearings are an exact fit into the motor housings, so they do fit snugly. When removing the old bearings, you may need to gently tap them out. However, when installing the new bearings, do not tap them in with anything, as this can dent the ball races and ruin the bearings.
    When installing ball bearings they need to be pressed in by the outer part of the race. Never apply pressure to the inner race, as this can damage the bearing and lead to premature failure.

    SKU: HK40Bearing
    €8.50
    inc. VAT

     IN STOCK
  • Scorpion HK-4020 Motor Shaft 5mm

    Scorpion HK-4020 Motor Shaft 5mm

    HKIII-4020 Shaft Kit (5mm 31mm)

    The Scorpion HK-4020, HKIII-4025 & HKIV-4025 motors are built with 8mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4020, HKIII-4025 & HKIV-4025 series Scorpion Helicopter Motors.

    The shaft for the HK-4020, HKIII-4025 & HKIV-4025 series motors measures 8mm in diameter, and is 78.7mm in long. The Stock HK-4020, HKIII-4025 & HKIV-4025 motors have a 5mm output shaft end on them to allow the user to install 5mm pinion gears. The shaft kit will also fit other brushless motors that require an 8mm shaft of this length with a 5mm end. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

    Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing.

    SKU: HKIII-4020-Shaft
    €9.99
    inc. VAT

     IN STOCK
  • Scorpion HK-4025 Motor Shaft 6mm

    Scorpion HK-4025 Motor Shaft 6mm

    Special shaft for 4025 motors, with extra Long extention, 30mm.

    Very easy to use with Logo motor bearing mount.

    Diameter of the shaft is 6mm

    SKU: HK-4025SHAFT6
    €16.00
    inc. VAT

     IN STOCK
  • Scorpion HK-4035 Motor Shaft 5mm-95mm

    Scorpion HK-4035 Motor Shaft 5mm-95mm

    The Scorpion HK-4035 motors are built with 8mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4035 series Scorpion Helicopter Motors.

    The shaft for the HK-4035 series motors measures 8mm in diameter, and is 94.7mm in long. The pinion end of this shaft is ground down to 5mm to allow the user to install 5mm pinion gears. The shaft kit will also fit other brushless motors that require a 5mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

    Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing.

    Included in the Box

    - HK4035 Motor Shaft (5mm) x1
    - Washer x 1
    - C-Clip x 2

    SKU: HK-4035SHAFT5
    €35.00
    inc. VAT

     IN STOCK
    NEW
  • Scorpion HK-4035 Motor Shaft 6mm-95mm

    Scorpion HK-4035 Motor Shaft 6mm-95mm

    The Scorpion HK-4035 motors are built with 8mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4035 series Scorpion Helicopter Motors.

    The shaft for the HK-4035 series motors measures 8mm in diameter, and is 94.7mm in long. The pinion end of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears. The shaft kit will also fit other brushless motors that require a 6mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

    Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing.

    Included in the Box

    - HK4035 Motor Shaft (6mm) x1
    - Washer x 1
    - C-Clip x 2

    SKU: HK-4035SHAFT6
    €35.00
    inc. VAT

     LOW STOCK
  • Scorpion HK-45 C-Clip Kit factory replacement C-Clip

    Scorpion HK-45 C-Clip Kit factory replacement C-Clip

    Scorpion HK-45 C-Clip Kit factory replacement C-Clip

    The Scorpion HK-45 C-Clip Kit are the factory replacement C-Clip, washers & set screw for all HK-45 Series Helicopter Motors.

    Included in the Box:

    • 4 x C-Clips
    • 4 x Set Screws
    • 4 x Washers
    SKU: HK-45C-CLIP-KIT
    €2.90
    inc. VAT

     LOW STOCK
  • Scorpion HK-4535-450KV 8mm shaft Brushless Motor Limited Edition

    Scorpion HK-4535-450KV 8mm shaft Brushless Motor Limited Edition

    Scorpion HK-4535-450KV 8mm shaft Brushless Motor Limited Edition is specially designed for a use on helicopters running on 14-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for the electric helicopter.  Special running for 14S LiPo battery deliver higher peak power and higher torque with lower running temperature.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold electro-coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    45 mm (1.77 in)
    • Stator Thickness:    35 mm (1.38 in)
    • No. of Stator Arms:    12
    • No. of Stator Poles:    10
    • Motor Wind:    5T+5T in double Wye (YY)
    • Motor Wire:    1-Strand 1.5 mm
    • Motor Kv:    450KV RPM/Volt
    • No-Load Current (Io/10V):    1.84 Amps
    • Motor Resistance (RM):    0.012 Ohms
    • Max Continuous Current:    120 Amps
    • Max Continuous Power:    6200 Watts
    • Weight:    660 Grams (23.27 oz)
    • Outside Diameter:    56.7 mm (2.23 in)
    • Shaft Diameter:    7.98 mm (0.37 in)
    • Body Length:    67.0 mm (2.63 in)
    • Overall Shaft Length:    122.3 mm (4.81 in)
    • Max Lipo Cell:    14s
    • Max Peak Current:    216 A (2 seconds)
    • Max Peak Power:    10360 Watts (2 seconds)
    • Motor Timing:    5deg to 15 deg
    • Drive Frequency:    8kHz
    SKU: HK-4535-450KV
    €459.00
    inc. VAT

     LOW STOCK
  • Scorpion HK-4535-500KV 8mm shaft Brushless Motor Limited Edition

    Scorpion HK-4535-500KV 8mm shaft Brushless Motor Limited Edition

    Scorpion HK-4535-500KV 8mm shaft Brushless Motor Limited Edition is specially designed for a use on helicopters running on 14-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for the electric helicopter.  Special running for 14S LiPo battery deliver higher peak power and higher torque with lower running temperature.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold electro-coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm lamination to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    45 mm (1.77 in)
    • Stator Thickness:    35 mm (1.38 in)
    • No. of Stator Arms:    12
    • No. of Stator Poles:    10
    • Motor Wind:    5T+4T in double Wye (YY)
    • Motor Wire:    1-Strand 1.5 mm
    • Motor Kv:    500KV RPM/Volt
    • No-Load Current (Io/10V):    2.06 Amps
    • Motor Resistance (RM):    0.010 Ohms
    • Max Continuous Current:    125 Amps
    • Max Continuous Power:    6500 Watts
    • Weight:    664 Grams (23.41 oz)
    • Outside Diameter:    56.7 mm (2.23 in)
    • Shaft Diameter:    7.98 mm (0.37 in)
    • Body Length:    67.0 mm (2.63 in)
    • Overall Shaft Length:    122.3 mm (4.81 in)
    • Max Lipo Cell:    14s
    • Max Peak Current:    270 (2 seconds)
    • Max Peak Power:    11880 (2 seconds)
    • Motor Timing:    5deg to 15 deg
    • Drive Frequency:    8kHz
    SKU: HK-4535-500KV
    €459.00
    inc. VAT

  • Scorpion HK-4540-400KV 8mm shaft Brushless Motor Ultimate

    Scorpion HK-4540-400KV 8mm shaft Brushless Motor Ultimate

    Scorpion HK-4540-400KV 8mm shaft Brushless Motor Ultimate is specially designed for a use on 700~800mm blade helicopters running on 12-18cell Li-Po power. This motor represents the most technologically advanced power source ever offered for the electric helicopter.  Special running for 12-18S LiPo battery deliver higher peak power and higher torque with lower running temperature.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold electro-coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm lamination to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    45 mm (1.77 in)
    • Stator Thickness:    40 mm (1.57 in)
    • No. of Stator Arms:    12
    • No. of Stator Poles:    10
    • Motor Wind:    5T+5T in double Wye (YY)
    • Motor Wire:    1-Strand 1.5 mm
    • Motor Kv:    400KV RPM/Volt
    • No-Load Current (Io/10V):    1.65 Amps
    • Motor Resistance (RM):    0.013Ohms
    • Max Continuous Current:    150 Amps
    • Max Continuous Power:    10000 Watts
    • Weight:    719 Grams (25.35 oz)
    • Outside Diameter:    56.7 mm (2.23 in)
    • Shaft Diameter:    7.98 mm (0.37 in)
    • Body Length:    71.9 mm (2.83 in)
    • Overall Shaft Length:    127.3 mm (5.01 in)
    • Max Lipo Cell:    12S-18S
    • Max Peak Current:    200 A (3 seconds)
    • Max Peak Power:    15000 Watts (3 seconds)
    • Motor Timing:    5deg to 15 deg
    • Drive Frequency:    8kHz
    SKU: HK-4540-400KV-ULT
    €459.00
    inc. VAT

     IN STOCK
  • Scorpion HK-5020 Motor Shaft Kit (6mm 43mm)

    Scorpion HK-5020 Motor Shaft Kit (6mm 43mm)

    The Scorpion HK-5020 motors are built with 10mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-5020 series Scorpion Helicopter Motors.

    The shaft for the HK-5020 series motors measures 10mm in diameter, and is 84.6mm in long. The pinion end of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears. The shaft kit will also fit other brushless motors that require a 10mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

    Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing.

    SKU: HK_5020_shaft
    €42.99
    inc. VAT

     IN STOCK
  • Scorpion HKII 2221-6

    Scorpion HKII 2221-6

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand temperatures of up to 200 degrees C (392 F).

    All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 3.17mm shaft (1/8 inch).

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    Specifications:
    • Stator Diameter:    22.0 mm (0.87 in)
    • Stator Thickness:    21.0 mm (0.83 in)
    • No. of Stator Arms :   9
    • Magnet Poles    6
    • Motor Wind:    6 Turn Delta
    • Motor Wire:    20-Strand 0.21mm
    • Motor Kv :   4400 RPM / Volt
    • No-Load Current (Io):    2.89 Amps @ 10 volts
    • Motor Resistance (Rm):    0.016 Ohms
    • Max Continuous Current:    52 Amps
    • Max Continuous Power:    525 Watts
    • Weight:    81 Grams (2.86 oz)
    • Outside Diameter:    27.9 mm (1.098 in)
    • Shaft Diameter:    3.17 mm (0.125 in)
    • Body Length:    38.3 mm (1.508 in)
    • Overall Shaft Length :   58.7 mm (2.311 in)
    • Max Lipo Cell :   3s
    • Motor Timing  :  5deg
    • Drive Frequency  :  8kHz
    Included in the Box:
    • 1 x Scorpion HKII-2221-6 Motor
    • 3 x Female Connectors
    • 3 x Heat Shrink
    • 4 x M3 Screws
    SKU: HKII-2221-6
    €72.00
    inc. VAT

     72HR STOCK
  • Scorpion HKII 2221-8

    Scorpion HKII 2221-8

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand temperatures of up to 200 degrees C (392 F).

    All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 3.17mm shaft (1/8 inch).

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    Specifications:

    • Stator Diameter:    22.0 mm (0.87 in)
    • Stator Thickness:    21.0 mm (0.83 in)
    • No. of Stator Arms:    9
    • Magnet Poles:    6
    • Motor Wind:    8 Turn Delta
    • Motor Wire:    16-Strand 0.21mm
    • Motor Kv :   3595 RPM / Volt
    • No-Load Current (Io):    2.31 Amps @ 10 volts
    • Motor Resistance (Rm):    0.024 Ohms
    • Max Continuous Current :   45 Amps
    • Max Continuous Power:    475 Watts
    • Weight:    81 Grams (2.86 oz)
    • Outside Diameter:    27.9 mm (1.098 in)
    • Shaft Diameter:    3.17 mm (0.125 in)
    • Body Length:    38.3 mm (1.508 in)
    • Overall Shaft Length:    58.7 mm (2.311 in)
    • Max Lipo Cell :   3s
    • Motor Timing :   5deg
    • Drive Frequency:    8kHz

    Included in the Box:

    • 1 x Scorpion HKII-2221-8 Motor
    • 3 x Female Connectors
    • 3 x Heat Shrink
    • 4 x M3 Screws
    SKU: HKII-2221-8
    €72.00
    inc. VAT

     LOW STOCK
  • Scorpion HKII-2221 Bearing Maintenance Kit

    Scorpion HKII-2221 Bearing Maintenance Kit

    The Scorpion HKII-2221 Bearing Maintenance Kit is made by air craft grade aluminum, it provides an easiest and quickest way to Disassemble the Scorpion HKII-22 Series Motor.

    SKU: HK-2221-BM-Kit
    €19.99
    inc. VAT

     IN STOCK
  • Scorpion HKII-2221-10

    Scorpion HKII-2221-10

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand temperatures of up to 200 degrees C (392 F).

    All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. If you intend on running a prop on this motor, you will need to purchase a prop adapter for a 3.17mm shaft (1/8 inch).

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    Specifications:

    • Stator Diameter:    22.0 mm (0.87 in)
    • Stator Thickness:    21.0 mm (0.83 in)
    • No. of Stator Armsv    9
    • Magnet Poles:    6
    • Motor Wind:    10 Turn Delta
    • Motor Wire:    13-Strand 0.21mm
    • Motor Kv:    3000 RPM / Volt
    • No-Load Current (Io):    1.79 Amps @ 10 volts
    • Motor Resistance (Rm):    0.031 Ohms
    • Max Continuous Current:    42 Amps
    • Max Continuous Power:    550 Watts
    • Weight :   81 Grams (2.86 oz)
    • Outside Diameter:    27.9 mm (1.098 in)
    • Shaft Diameter:    3.17 mm (0.125 in)
    • Body Length:    38.3 mm (1.508 in)
    • Overall Shaft Length:    58.7 mm (2.311 in)
    • Max Lipo Cell:    4s
    • Motor Timing:    5deg
    • Drive Frequency:    8kHz

    Included in the Box:

    • 1 x Scorpion HKII-2221-10 Motor
    • 3 x Female Connectors
    • 3 x Heat Shrink
    • 4 x M3 Screws
    SKU: HKII-2221-10
    €72.00
    inc. VAT

  • Scorpion HKII-2221-2010KV

    Scorpion HKII-2221-2010KV

    The Scorpion HKII -Series 22mm brushless motors are designed to provide reliable power for your smaller RC aircraft and helicopter . These motors features replaceable 2.3mm prop shafts with dual ball bearings. All Scorpion HK-Series motors come with 3.5mm bullet style connectors already installed, and include a complete hardware package containing 3 matching female bullet connectors for your Speed Controller, a cross style back plate mount with screws, all in an attractive metal can package. All of the Scorpion HK-Series 22mm motors are built with a 9 tooth stator assembly, with 6 magnets in the rotor housing.

    Specifications

    Stator Diameter 22.0 mm(0.858 in)
    Stator Thickness 21.0 mm(0.819 in)
    No. of Stator Arms 9
    No. of Magnet Poles 6
    Motor Wind 16 Turn Delta
    Motor Wire 10-Strand 0.21 mm
    Motor Kv 2010 KV RPM/Volt
    No-Load Current (Io) 1.01 Amps @ 10 volts
    Motor Resistance (Rm) 0.052 Ohms
    Max Continuous Current 28 Amps
    Max Continuous Power 590 Watts
    Weight 79 Grams (2.78 oz)
    Outside Diameter 27.85 mm (1.086 in)
    Shaft Diameter 3.175 mm (0.123 in)
    Body Length 38.3 mm (1.508 in)
    Overall Shaft Length 58.7 mm (2.289 in)
    Max Lipo Cell 6s
    SKU: HKII-2221-2010
    €75.90
    inc. VAT

     LOW STOCK
  • Scorpion HKII-4235-520Kv (Nick Maxwell Edition)

    Scorpion HKII-4235-520Kv (Nick Maxwell Edition)

    Introducing our brand new motor, HKII-4235-520kv (Nick Maxwell Edition)! It is specially made for narrow frame 700 class helicopters. It has the power and performance of a HK-4525-520kv motor in a narrower motor frame. Additional to that, HKII-4235-520kv is leaser engraved with Nick Maxwell signature on the motor.

    Specifications

    Stator Diameter     42 mm (1.65 in)
    Stator Thickness     35 mm (1.38 in)
    No. of Stator Arms     12
    No. of Stator Poles     10
    Motor Wind     5+4 Turn Delta
    Motor Wire     1-Strand 1.5 mm
    Motor Kv     520KV RPM/Volt
    No-Load Current (Io/10V)     2.3 Amps
    Motor Resistance (RM)     0.012 Ohms
    Max Continuous Current     100 Amps
    Max Continuous Power     4450 Watts
    Weight     519 Grams (18.18 oz)
    Outside Diameter     52.3 mm (2.06 in)
    Shaft Diameter     5.98 mm (0.24 in)
    Body Length     61.90 mm (2.45 in)
    Overall Shaft Length     110.0 mm (4.33 in)
    Max Lipo Cell     12s
    Max Peak Current     215A (2 seconds)
    Max Peak Power     9600 Watts (2 seconds)
    Motor Timing     5deg to 15 deg
    Drive Frequency     8kHz

    SKU: HKII_4235_520
    €299.90
    inc. VAT

  • Scorpion HKII-4235-630KV (Limited Edition)

    Scorpion HKII-4235-630KV (Limited Edition)

    Introducing our brand new motor, HKII-4235-630kv, It is specially made for narrow frame 700 class helicopters. It has the power and performance of a HK-4525-630kv motor in a narrower motor frame.


    Specifications

    Specifications
    Stator Diameter     42 mm (1.65 in)
    Stator Thickness     35 mm (1.38 in)
    No. of Stator Arms     12
    No. of Stator Poles     10
    Motor Wind     4 Turn YY
    Motor Wire     1-Strand 1.6 mm
    Motor Kv     630 KV RPM/Volt
    No-Load Current (Io/10V)     3.59 Amps
    Motor Resistance (RM)     0.009 Ohms
    Max Continuous Current     120 Amps
    Max Continuous Power     5328 Watts
    Weight     522 Grams (18.27 oz)
    Outside Diameter     52.3 mm (2.06 in)
    Shaft Diameter     5.98 mm (0.24 in)
    Body Length     64.5 mm (2.54 in)
    Overall Shaft Length     112.9 mm (4.44 in)
    Max Lipo Cell     12s
    Max Peak Current     160 Amps (3 seconds)
    Max Peak Power     7100 Watts (3 seconds)
    Motor Timing     5deg to 15 deg
    Drive Frequency     8kHz

    SKU: HKII_4235_630
    €299.90
    inc. VAT

  • Scorpion HKIII-4025 Shaft Kit XL (6mm)

    Scorpion HKIII-4025 Shaft Kit XL (6mm)

    The Scorpion HK-4025 & HKIII-4025 series motors are built with 8mm hardened steel shafts that will last through countless hours of flying fun, but occasionally, on a "Less than Perfect" landing, you may bend or break one. For these occasions, we offer factory replacement shafts for all the HK-4025 & HKIII-4025 series Scorpion Helicopter Motors.

    This shaft kit is for the HK-4025 & HKIII-4025 series motors that used in newer T-600 Heli. It measures 8mm in diameter, and is 88.5mm in length. The pinion end of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears. The shaft kit will also fit other brushless motors that require a 6mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

    Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing.

    Included in the Box:

    • HKIII-4025 Motor Shaft Kit (6mm) -XL x1
    • Washer x 1
    • C-Clip x 2
    SKU: HK-4025-6mm-Shaft-XL
    €16.00
    inc. VAT

     IN STOCK
  • Scorpion HKIII-4035 Bearing Maintenance Kit

    Scorpion HKIII-4035 Bearing Maintenance Kit

    The Scorpion HK-4035 Bearing Maintenance Kit is made by air craft grade aluminum, it provides an easiest and quickest way to Disassemble the Scorpion HK-40 & HKIII-40 Series Motor, except the HK-4015 Series.

    SKU: HK-4035-BM-Kit
    €19.99
    inc. VAT

     LOW STOCK
  • Scorpion HKIII-4035 Motor Shaft 110mm

    Scorpion HKIII-4035 Motor Shaft 110mm

     Scorpion HK-4035 V2 & HKIII-4035 Motor Shaft Kit ( EXTRA-LONG) - 110mm

    This is the new version shaft made from a new, much stronger SKH51 Steel alloy that will hold up to the most extreme flying styles.

    • Total length of this shaft is 110mm. With 48mm of shaft exposed for pinion.
    • This shaft will get you seated correctly into the GAUI X7 motor bearing support.
    • Fits HK & HKIII 4035 series motors, Also fits the Stock GAUI X7 [GUEC GM-350S] 500KV Motor.
    • Flat spot for pinion grub screw, no grinding needed.
    • Also fits the Stock GAUI X7 (GUEC GM-350S) 500KV Motor.

    This shaft kit is for the HKIII-4035 & HK-4035 XL series motors that used in GAUI X7 Heli and measures 8mm in diameter, and is 110mm in length. The pinion end (48mm) of this shaft is ground down to 6mm to allow the user to install 6mm pinion gears. The shaft kit will also fit other brushless motors that require a 6mm shaft of this length. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.

    SKU: HK-4035XXL
    €36.00
    inc. VAT

     LOW STOCK
  • Scorpion HKIII-5025-520KV F3S Brushless Motor Edition

    Scorpion HKIII-5025-520KV F3S Brushless Motor Edition

    Scorpion Motor HKIII-5025-520KV High Speed Racing

    The brand new Scorpion HKIII-5025-520KV F3S Edition is especially designed for use in high speed racing applications.
    With its 1-Strand 1.6mm​ winding, this motor will deliver maximum efficiency and extreme performance on 16s power.

    Specifications:

    Stator Diameter: 50.0 mm (1.97 in)
    Stator Thickness: 25.0 mm (0.98 in)
    No. of Stator Arms: 12
    Magnet Poles: 10
    Motor Wind: 6+5 Turn 2Y
    Motor Wire: 1-Strand 1.6mm
    Motor KV: 520 RPM / Volt
    No-Load Current (Io) @ 10V: 2.2 Amps
    Motor Resistance (Rm): 0.009 Ohms
    Max Continuous Current: 130 Amps
    Max Continuous Power: 7696 Watts
    Weight: 595 Grams (20.83 oz)
    Outside Diameter: 61.5 mm (2.42 in)
    Shaft Diameter: 60.2 mm (2.37 in)
    Body Length: 64.9 mm (2.56 in)
    Overall Shaft Length: 84.6 mm (3.33 in)
    Max Lipo Cell: 16s
    Max Peak Current: 200A (2 seconds)
    Max Peak Power: 11840 Watts (2 seconds)
    Motor Timing: 5deg
    Drive Frequency: 8kHz

    Weight including packaging: 1100g

    SKU: HKIII-5025-520KV
    €349.90
    inc. VAT

     72HR STOCK
  • Scorpion Logo 600 SE HKIII-5025-440KV Brushless Motor

    Scorpion Logo 600 SE HKIII-5025-440KV Brushless Motor

    Scorpion HKIII-5025-440KV Brushless Motor is mainly designed for Logo 600 SE and also for people that want to convert their .90 size glow helicopter to electric power. This motor has a maximum continuous power rating of 4200 watts at 95 amps, and a peak power rating of 5700 watts at 130 amps! The larger diameter 50mm stator allows these motors to produce insane amounts of torque.

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    50 mm (1.56 in)
    • Stator Thickness:    25 mm (0.79 in)
    • No. of Stator Arms:    12
    • Magnet Poles:    10
    • Motor Wind:    12 Turn Delta
    • Motor Wire:    19-Strand 0.33 mm
    • Motor Kv:    440KV RPM / Volt
    • No-Load Current (Io/10V):    1.15 Amps
    • Motor Resistance (Rm):    0.015 Ohms
    • Max Continuous Current:    95 Amps
    • Max Continuous Power:    4200 Watts
    • Weight:    566 Grams (19.96 oz)
    • Outside Diameter:    62.1 mm (2.44 in)
    • Shaft Diameter:    5.98 mm (0.24 in)
    • Body Length:    58.7 mm (2.31 in)
    • Overall Shaft Length:    104.30 mm (4.11 in)
    • Max Lipo Cell:    14s
    • Peak Current:    120A (5 seconds)
    • Peal Power:    5320 Watts (5 seconds)
    • Motor Timing :   5deg
    • Drive Frequency:    8kHz
    SKU: HKIII-5025-440KV
    €274.99
    inc. VAT

     LOW STOCK
  • Scorpion M-2205-2350Kv Brushless Multirotor Motors 2 motors pack

    Scorpion M-2205-2350Kv Brushless Multirotor Motors 2 motors pack

    Scorpion M-2205-2350Kv Brushless Multirotor Motors (2-pack, 1 Normal & 1 Reverse Rotation) , those motors are V2, imrpooved batch.


    M-2205-2350kv made for larger and high speed race course, power by 3S to 4S LiPo battery with using 5 to 6 inch propeller. To use on most FPV racer on the market, especially this is a PERFECT match motor for Scorpion Sky Strider 280.

    Each package box “unit” included 2 motors (1 x CW and 1 x CCW) with Scorpion signature color gold and black color bullet nuts.

    Specifications

    • Stator Diameter     22.0 mm (0.87 in)
    • Stator Thickness     5.0 mm (0.197 in)
    • No. of Stator Arms     12
    • Magnet Poles     14
    • Motor Wind     22 Turn Delta
    • Motor Wire     4-Strand 0.21mm
    • Motor Kv     2350 RPM / Volt
    • No-Load Current (Io/10V)     0.88 Amps
    • Motor Resistance (Rm)     0.775 Ohms
    • Max Continuous Current     25 Amps
    • Max Continuous Power     420 Watts
    • Weight     30.6 Grams (1.08 oz)
    • Outside Diameter     27.85 mm (1.13 in)
    • Shaft Diameter     2.98 mm (0.12 in)
    • Body Length     21.35 mm (0.84 in)
    • Overall Shaft Length     23.8 mm (0.94 in)
    • Max Lipo Cell     4s
    • Motor Timing     5deg
    • Drive Frequency     8kHz
    SKU: M-2205-2350
    €48.90
    inc. VAT

     IN STOCK

Manufacturers