Scorpion

Scorpion
RCmarket choosen to distribute this Finest line of Speed controllers and motors. Best quality product your Money can buy

Products


  • Scorpion 600 Class Heli HKIV-4025-1100KV (6mm shaft)

    Scorpion 600 Class Heli HKIV-4025-1100KV (6mm shaft)

    This is the Fourth generation HKIV-4025 series motors. With the same motor design and materials of HKII-45 series, and single strand winding technique on this size of motor, it has the better efficiency and power conversion than HKIII-40 series, with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications

    • Stator Diameter    40 mm(1.57 in)
    • Stator Thickness    25 mm(0.98 in)
    • No. of Stator Arms    12
    • Magnet Poles    10
    • Motor Wind    3+3 Turn Delta
    • Motor Wire    1-Strand 1.7 mm
    • Motor Kv    1100KV RPM/Volt
    • No-Load Current (IO/10v)    5.29 Amps
    • Motor Resistance (RM)    0.006 Ohms
    • Max Continuous Current    100 Amp
    • Max Continuous Power    2220 Watt
    • Weight    347 Grams (10.58 oz)
    • Outside Diameter    49.50 mm (1.95 in)
    • Shaft Diameter    5.98 mm (0.24 in)
    • Body Length    54 mm (2.13 in)
    • Overall Shaft Length    89.9 mm (3.54 in)
    • Max Lipo Cell    6s
    • Peak Continuous Current    130 Amps (5 seconds)
    • Peak Continuous Power    2886 Watts (5 seconds)
    • Motor Timing    5deg
    • Drive Frequency    8kHz
    SKU: HKIV-4025-1100KV-6
    €199.90
    inc. VAT

     IN STOCK
  • Scorpion 700 Class Electric Heli HKIII-5020-450KV Brushless Motor

    Scorpion 700 Class Electric Heli HKIII-5020-450KV Brushless Motor

    Scorpion HKIII-5020-450KV Brushless Motor is designed for 700 class Electric Helicopters, and for people that want to convert their 90 size glow helicopter to electric power. This motor has a maximum continuous power rating of 3770 watts at 85 amps, and a peak power rating of 5320 watts at 120 amps! The larger diameter 50mm stator allows these motors to produce insane amounts of torque.

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    50 mm (1.56 in)
    • Stator Thickness:    20 mm (0.79 in)
    • No. of Stator Arms:    12
    • Magnet Poles:    10
    • Motor Wind:    14 Turn Delta
    • Motor Wire:    16-Strand 0.33 mm
    • Motor Kv:    450KV RPM / Volt
    • No-Load Current (Io/10V):    1.31 Amps
    • Motor Resistance (Rm):    0.017 Ohms
    • Max Continuous Current:    85 Amps
    • Max Continuous Power:    3770 Watts
    • Weight:    501 Grams (17.67 oz)
    • Outside Diameter:    62.1 mm (2.44 in)
    • Shaft Diameter:    5.98 mm (0.24 in)
    • Body Length:    53.7 mm (2.11 in)
    • Overall Shaft Length:    98.30 mm (3.87 in)
    • Max Lipo Cell:    12s
    • Peak Current:    120A (5 seconds)
    • Peal Power:    5320 Watts (5 seconds)
    • Motor Timing:    5deg
    • Drive Frequency:    8kH

    SKU: HKIII-5020-450KV
    €239.99
    inc. VAT

     72HR STOCK
  • Scorpion 700 Class Electric Heli HKIII-5020-520KV Brushless Motor

    Scorpion 700 Class Electric Heli HKIII-5020-520KV Brushless Motor

    Scorpion HKIII-5020-520KV Brushless Motor is designed for 700 class Electric Helicopters, and for people that want to convert their .90 size glow helicopter to electric power. This motor has a maximum continuous power rating of 3770 watts at 85 amps, and a peak power rating of 5320 watts at 120 amps! The larger diameter 50mm stator allows these motors to produce insane amounts of torque.

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    50 mm (1.56 in)
    • Stator Thickness:    20 mm (0.79 in)
    • No. of Stator Arms:    12
    • Magnet Poles:    10
    • Motor Wind :   13 Turn Delta
    • Motor Wire:    19-Strand 0.33 mm
    • Motor Kv:    520KV RPM / Volt
    • No-Load Current (Io/10V):    1.26 Amps
    • Motor Resistance (Rm):    0.014 Ohms
    • Max Continuous Current:    90 Amps
    • Max Continuous Power:    4000 Watts
    • Weight:    498 Grams (17.56 oz)
    • Outside Diameter:    62.1 mm (2.44 in)
    • Shaft Diameter:    5.98 mm (0.24 in)
    • Body Length:    53.7 mm (2.11 in)
    • Overall Shaft Length:    98.30 mm (3.87 in)
    • Max Lipo Cell:    12s
    • Peak Current :   120A (5 seconds)
    • Peal Power:    5320 Watts (5 seconds)
    • Motor Timing:    5deg
    • Drive Frequency:    8kHz
    SKU: HKIII-5020-520KV
    €239.99
    inc. VAT

     LOW STOCK
  • Scorpion 700 Class Heli HK-4530-450KV Brushless Motor Limited Edition

    Scorpion 700 Class Heli HK-4530-450KV Brushless Motor Limited Edition

    Scorpion HK-4530-450KV Brushless Motor Limited Edition is specially designed for a use on 700 class helicopters running on 14-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter and also produces 20% more torque than the Scorpion popular HKIII-4035 series motors and exceed 90% efficiency.

    Each of the new HK-4530-450KV Limited Edition motor is wound with a single strand of 1.4mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 5400 watts at 110 amps, and can handle peak inputs of 9600 watts and 200 amps for 2 seconds.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    45 mm (1.77 in)
    • Stator Thickness:    30 mm (1.18 in)
    • No. of Stator Arms:    12
    • No. of Stator Poles:    10
    • Motor Wind:    6T+5T in double Wye
    • Motor Wire:    1-Strand 1.4 mm
    • Motor Kv:    450KV RPM/Volt
    • No-Load Current (Io/10V):    1.71 Amps
    • Motor Resistance (RM):    0.0130 Ohms
    • Max Continuous Current:    110 Amps
    • Max Continuous Power:    5400 Watts
    • Weight:    565 Grams (17.25 oz)
    • Outside Diameter:    56.7 mm (2.23 in)
    • Shaft Diameter:    5.98 mm (0.24 in)
    • Body Length :   60.6 mm (2.39 in)
    • Overall Shaft Length:    100.0 mm (3.94 in)
    • Max Lipo Cell:    14s (for Best Setup)
    • Max Peak Current:    200A (2 seconds)
    • Max Peak Power:    9600 Watts (2 seconds)
    • Motor Timing:    5deg to 15deg
    • Drive Frequency:    8kHz

    Included in the Box:

    • 1 x Scorpion HK-4530-450KV Motor
    • 3x Female 6mm Connectors
    • 3x Heat Shrink  

    Note:

    • *This motor is using 30mm bolt spacing on the mounting with M4 Screw holes
    SKU: HK-4530-450KV
    €374.00
    inc. VAT

  • Scorpion 700 Class Heli HK-4530-500KV 6mm shaft Brushless Motor Limited Edition

    Scorpion 700 Class Heli HK-4530-500KV 6mm shaft Brushless Motor Limited Edition

    Scorpion HK-4530-500KV 6mm shaft Brushless Motor Limited Edition is specially designed for a use  on 700 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter and also produces 20% more torque than the Scorpion popular HKIII-4035 series motors and exceed 89% efficiency.

    Each of the new HK-4530-500KV Limited Edition motor is wound with a single strand of 1.5mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 4800 watts at 115 amps, and can handle peak inputs of 11000 watts and 250 amps for 2 seconds.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    45 mm (1.77 in)
    • Stator Thickness:    30 mm (1.18 in)
    • No. of Stator Arms:    12
    • No. of Stator Poles:    10
    • Motor Wind:    5T+5T Turn Wye
    • Motor Wire:    1-Strand 1.5 mm
    • Motor Kv:    500KV RPM/Volt
    • No-Load Current (Io/10V):    1.85 Amps
    • Motor Resistance (RM):    0.0107 Ohms
    • Max Continuous Current:    115 Amps
    • Max Continuous Power:    4800 Watts
    • Weight :   565 Grams (17.25 oz)
    • Outside Diameter:    56.7 mm (2.23 in)
    • Shaft Diameter:    5.98 mm (0.24 in)
    • Body Length:    60.6 mm (2.39 in)
    • Overall Shaft Length:    100.0 mm (3.94 in)
    • Max Lipo Cell:    12s
    • Max Peak Current:    250A (2 seconds)
    • Max Peak Power:    11000 Watts (2 seconds)
    • Motor Timing:    5deg to 15 deg
    • Drive Frequency:    8kHz

    Included in the Box:

    • 1 x Scorpion HK-4530-500KV Motor

    Note:

    • *This motor is using 30mm bolt spacing on the mounting with M4 Screw holes
    • * Gold connectors are not soldered nor included

    SKU: HK-4530-500KV
    €374.00
    inc. VAT

     LOW STOCK
  • Scorpion 700 Class Heli HK-4530-540KV Brushless Motor Limited Edition

    Scorpion 700 Class Heli HK-4530-540KV Brushless Motor Limited Edition

    Scorpion HK-4530-540KV Brushless Motor Limited Edition is specially designed for a use on 700 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter and also produces 20% more torque than the Scorpion popular HK4035 series motors and exceed 89% efficiency.

    Each of the new HK-4530-540KV Limited Edition motor is wound with a single strand of 1.5mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 4800 watts at 115 amps, and can handle peak inputs of 11000 watts and 250 amps for 2 seconds.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    45 mm (1.77 in)
    • Stator Thickness:    30 mm (1.18 in)
    • No. of Stator Arms:    12
    • No. of Stator Poles:    10
    • Motor Wind:    9 Turn Wye
    • Motor Wire:    1-Strand 1.5 mm
    • Motor Kv:    540KV RPM/Volt
    • No-Load Current (Io/10V):    2.11 Amps
    • Motor Resistance (RM):    0.010 Ohms
    • Max Continuous Current:    115 Amps
    • Max Continuous Power:    4800 Watts
    • Weight:    565 Grams (17.25 oz)
    • Outside Diameter:    56.7 mm (2.23 in)
    • Shaft Diameter:    5.98 mm (0.24 in)
    • Body Length:    60.6 mm (2.39 in)
    • Overall Shaft Length:    100.0 mm (3.94 in)
    • Max Lipo Cell:    12s
    • Max Peak Current:    250A (2 seconds)
    • Max Peak Power:    11000 Watts (2 seconds)
    • Motor Timing :   5deg to 15 deg
    • Drive Frequency:    8kHz

    Included in the Box:

    • 1 x Scorpion HK-4530-540KV Motor

    Note:

    • *This motor is using 30mm bolt spacing on the mounting with M4 Screw holes
    • * Gold connectors are not soldered nor included

    SKU: HK-4530-540KV
    €374.00
    inc. VAT

     LOW STOCK
  • Scorpion 700 Class Heli HKII-4525-520KV ULTIMATE Brushless Motor

    Scorpion 700 Class Heli HKII-4525-520KV ULTIMATE Brushless Motor

    HK-4525 has been the motor of choice for 700-class RC helicopters, and has become the performance benchmark for every other model motor manufacturer. Eighteen months later, in April of 2012, we released an improved version of this motor, the HK-4525-520kv Ultimate Edition. Since then, the Ultimate Edition motor has proven itself to be extremely successful in heli competitions, and has become the most popular motor used in competition 700-class helicopters world-wide.

    Many other motor manufacturers have tried to compete with this motor, but none have been successful. We even tried for years to improve the HK-4525-520 motor but were unable to do so. Finally, after nearly 5 years of testing and development, we are pleased to announce the release of the new next generation HKII-4525-520kv Ultimate motor.

    Through improvements in motor design and materials, we have been able to increase the efficiency and power conversion of this motor with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

    With the new HKII-4525-520kv Ultimate motor, we have once again raised the bar and created a new benchmark for 700-class helicopter power!

    Each of the new HKII-4525-520KV ULTIMATE motor is wound with a single strand of 1.4mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 4450 watts at 100 amps, and can handle peak inputs of 10200 watts and 230 amps for 2 seconds

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    *This motor is using 30mm bolt spacing on the mounting with M4 Screw holes
    Scorpion HKII-4525-520KV – ULTIMATE Specifications

    • Stator Diameter     45 mm (1.77 in)
    • Stator Thickness     25 mm (0.98 in)
    • No. of Stator Arms     12
    • No. of Stator Poles     10
    • Motor Wind     5+6T YY
    • Motor Wire     1-Strand 1.4 mm
    • Motor Kv     520KV RPM/Volt
    • No-Load Current (Io/10V)     1.81 Amps
    • Motor Resistance (RM)     0.012 Ohms
    • Max Continuous Current     100 Amps
    • Max Continuous Power     4450 Watts
    • Weight     516 Grams (18.20oz)
    • Outside Diameter     56.9 mm (2.24 in)
    • Shaft Diameter     5.98 mm (0.24 in)
    • Body Length     57.7 mm (2.27 in)
    • Overall Shaft Length     112 mm (4.41 in)
    • Max Lipo Cell     12s
    • Max Peak Current     230A (2 seconds)
    • Max Peak Power     10200 Watts (2 seconds)
    • Motor Timing     5deg to 15 deg
    • Drive Frequency     8kHz
    SKU: HKII-4525-520-ULT
    €359.00
    inc. VAT

     IN STOCK
  • Scorpion 700 Class Heli HKIII-4035-450KV Brushless Motor

    Scorpion 700 Class Heli HKIII-4035-450KV Brushless Motor

    Scorpion HKIII-4035-450KV Brushless Motor is specially designed for a use on 700 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    40 mm (1.57 in)
    • Stator Thickness:    35 mm (1.024 in)
    • No. of Stator Arms:    12
    • Magnet Poles:    10
    • Motor Wind:    10 Turn Delta
    • Motor Wire:    26 - Strand 0.25mm
    • Motor Kv:    450KV RPM / Volt
    • No-Load Current (IO):    1.85 Amps @ 10v
    • Motor Resistance (RM) :   0.020 Ohms
    • Max Continuous Current:    75 Amps
    • Max Continuous Power :   3300 Watts
    • Weight:    460 Grams (16.22 oz)
    • Outside Diameter:    49.98 mm (1.97 in)
    • Shaft Diameter:    5.98 mm (0.235 in)
    • Body Length:    61.8 mm (2.43 in)
    • Overall Shaft Length:    100.0 mm (3.93 in)
    • Max Lipo Cell:    12s
    • Peak Current:    95A (5 seconds)
    • Peak Power:    4200 Watts (5 seconds)
    • Motor Timing:    5deg
    • Drive Frequency:    8kHz   

    Note:

    • *This motor is using 30mm*25mm bolt spacing on the mounting with M4 Screw holes
    SKU: HKIII-4035-450
    €199.00
    inc. VAT

  • Scorpion 700 Class Heli HKIII-4035-530KV Brushless Motor

    Scorpion 700 Class Heli HKIII-4035-530KV Brushless Motor

    Scorpion HKIII-4035-530KV Brushless Motor is specially designed for a use on 700 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 700 class electric helicopter.

    Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Coated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:
    • Stator Diameter:    40 mm (1.57 in)
    • Stator Thickness:    35 mm (1.024 in)
    • No. of Stator Arms:    12
    • Magnet Poles:    10
    • Motor Wind:    9 Turn Delta
    • Motor Wire:    22 - Strand 0.29mm
    • Motor Kv:    530KV RPM / Volt
    • No-Load Current (IO):    2.15 Amps @ 10v
    • Motor Resistance (RM):    0.015 Ohms
    • Max Continuous Current:    80 Amps
    • Max Continuous Power:    3400 Watts
    • Weight:    460 Grams (16.22 oz)
    • Outside Diameter:    49.98 mm (1.97 in)
    • Shaft Diameter:    5.98 mm (0.235 in)
    • Body Length:    61.8 mm (2.43 in)
    • Overall Shaft Length:    100.0 mm (3.93 in)
    • Max Lipo Cell:    12s
    • Peak Current:    100A (5 seconds)
    • Peak Power:    4400 Watts (5 seconds)
    • Motor Timing:    5deg
    • Drive Frequency:    8kHz
    Note:
    • *This motor is using 30mm*25mm bolt spacing on the mounting with M4 Screw holes
    SKU: HKIII-4035-530
    €199.00
    inc. VAT

     72HR STOCK
  • Scorpion 700 Class Heli HKIV-4035-500KV Brushless Motor

    Scorpion 700 Class Heli HKIV-4035-500KV Brushless Motor

    From 2010 when Scorpion HKIII-40 series is released, a lot of feedback by World Champions and pilots in all facets of the hobby are received that they have well established themselves as the Gold Standard of R/C model power!

    The HKIII-4035 series motors have proven themselves to be extremely successful in heli community and has become the most popular motor used in 600 ~ 700 class helicopters world-wide.

    And now we are pleased to announce the release of the fourth generation HKIV-4035 series motors. With the same motor design and materials of HKII-45 series, and single strand winding technique on this size of motor, it has the better efficiency and power conversion than HKIII-40 series, with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

    Specifications

    • Stator Diameter    40 mm (1.57 in)
    • Stator Thickness    35 mm (1.024 in)
    • No. of Stator Arms    12
    • Magnet Poles    10
    • Motor Wind    5+5 Turn Delta
    • Motor Wire    1-Strand 1.4mm
    • Motor Kv    500KV RPM / Volt
    • No-Load Current (IO/10v)    2.31 Amps @ 10v
    • Motor Resistance (RM)    0.016 Ohms
    • Max Continuous Current    84 Amps
    • Max Continuous Power    3726 Watts
    • Weight    456 Grams (16.09 oz)
    • Outside Diameter    49.5 mm (1.95 in)
    • Shaft Diameter    5.98 mm (0.235 in)
    • Body Length    64 mm (2.52 in)
    • Overall Shaft Length    102.4 mm (4.03 in)
    • Max Lipo Cell    12s
    • Peak Continuous Current    104A (5 seconds)
    • Peak Continuous Power    4617 Watts (5 seconds)
    • Motor Timing    5deg
    • Drive Frequency    8kHz

    Included in the Box

    • 1 x Scorpion HKIV-4035-500KV Motor
    • 3 x Female Connectors
    • 3 x Connector Cover
    • 4 x M4 Screws
    SKU: HKIV-4035-500
    €249.00
    inc. VAT

     IN STOCK
  • Scorpion 700 Class Heli HKIV-4035-560KV Brushless Motor

    Scorpion 700 Class Heli HKIV-4035-560KV Brushless Motor

    From 2010 when Scorpion HKIII-40 series is released, a lot of feedback by World Champions and pilots in all facets of the hobby are received that they have well established themselves as the Gold Standard of R/C model power!

    The HKIII-4035 series motors have proven themselves to be extremely successful in heli community and has become the most popular motor used in 600 ~ 700 class helicopters world-wide.

    And now we are pleased to announce the release of the fourth generation HKIV-4035 series motors. With the same motor design and materials of HKII-45 series, and single strand winding technique on this size of motor, it has the better efficiency and power conversion than HKIII-40 series, with an entirely new EM field design, while improving the compatibility with various speed controllers available on the market. This new design motor will deliver even more power to your helicopter, with increased efficiency!

    Specifications

    • Stator Diameter    40 mm (1.57 in)
    • Stator Thickness    35 mm (1.024 in)
    • No. of Stator Arms    12
    • Magnet Poles    10
    • Motor Wind    4+5Turn Delta
    • Motor Wire    1-Strand 1.5mm
    • Motor Kv    560KV RPM / Volt
    • No-Load Current (IO/10v)    2.81 Amps @ 10v
    • Motor Resistance (RM)    0.013 Ohms
    • Max Continuous Current    100 Amps
    • Max Continuous Power    4440 Watts
    • Weight    456 Grams (16.09 oz)
    • Outside Diameter    49.5 mm (1.95 in)
    • Shaft Diameter    5.98 mm (0.235 in)
    • Body Length    64 mm (2.52 in)
    • Overall Shaft Length    102.4 mm (4.03 in)
    • Max Lipo Cell    12s
    • Peak Continuous Current    120A (5 seconds)
    • Peak Continuous Power    5328 Watts (5 seconds)
    • Motor Timing    5deg
    • Drive Frequency    8kHz

    Included in the Box

    • 1 x Scorpion HKIV-4035-560KV Motor
    • 3 x Female Connectors
    • 3 x Connector Cover
    • 4 x M4 Screws
    SKU: HKIV-4035-560
    €249.00
    inc. VAT

     LOW STOCK
  • Scorpion 800 Class Electric Heli HK-5035-500KV Brushless Motor

    Scorpion 800 Class Electric Heli HK-5035-500KV Brushless Motor

    The Scorpion HK-5035-500 motor will provide all the power you need for the larger 800 class electric helicopters, those massive electric powered scale projects or for your workhorse camera platform helicopters that need to be able to lift heavy weights reliably.

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:
    • Stator Diameter:    50 mm (1.56 in)
    • Stator Thickness:    35 mm (1.37 in)
    • No. of Stator Arms:    12
    • Magnet Poles:    8
    • Motor Wind:    9 Turn Delta
    • Motor Wire:    26-Strand 0.33 mm
    • Motor Kv:    500KV RPM / Volt
    • No-Load Current (Io/10V):    1.03 Amps
    • Motor Resistance (Rm):    0.012 Ohms
    • Max Continuous Current :   120 Amps
    • Max Continuous Power:    5400 Watts
    • Weight:    670 Grams (23.45 oz)
    • Outside Diameter:    61.0 mm (2.4 in)
    • Shaft Diameter:    7.98 mm (0.3 in)
    • Body Length:    66.0 mm (2.59 in)
    • Overall Shaft Length:    100.75 mm (3.97 in)
    • Max Lipo Cell:    12s
    • Peak Current :   160A (5 seconds)
    • Peal Power:    7100 Watts (5 seconds)
    SKU: HK-5035-500
    €329.00
    inc. VAT

     LOW STOCK
  • Scorpion 800 Class Electric Heli HKIII-5035-410KV Brushless Motor

    Scorpion 800 Class Electric Heli HKIII-5035-410KV Brushless Motor

    Scorpion HKIII-5035-410KV Brushless Motor will provide all the power you need for the larger 800 class electric helicopters, those massive electric powered scale projects or for your workhorse camera platform helicopters that need to be able to lift heavy weights reliably.

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with high quality laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications:

    • Stator Diameter:    50 mm (1.56 in)
    • Stator Thickness:    35 mm (1.38 in)
    • No. of Stator Arms:    12
    • Magnet Poles:    10
    • Motor Wind:    9 Turn Delta
    • Motor Wire:    24-Strand 0.33 mm
    • Motor Kv:    410KV RPM / Volt
    • No-Load Current (Io/10V):    1.53 Amps
    • Motor Resistance (Rm):    0.012 Ohms
    • Max Continuous Current:    105 Amps
    • Max Continuous Power:    5100 Watts
    • Weight:    742 Grams (26.16 oz)
    • Outside Diameter:    62.1 mm (2.44 in)
    • Shaft Diameter:    5.98 mm (0.24 in)
    • Body Length:    68.70 mm (2.70 in)
    • Overall Shaft Length:    119.30 mm (4.70 in)
    • Max Lipo Cell:    14s
    • Peak Current:    145A (5 seconds)
    • Peal Power:    7000 Watts (5 seconds)
    • Motor Timing:    5deg
    • Drive Frequency:    8kHz
    SKU: HKIII-5035-410KV
    €329.00
    inc. VAT

     72HR STOCK
  • Scorpion Brushless Motor HK-2206-5300KV

    Scorpion Brushless Motor HK-2206-5300KV

    Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are N-50EH style, which are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

    All Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. This motor is specifically designed for the newer micro helicopters, such as the GAUI EP200, that require a 2.3mm output shaft.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    Specifications:

    • Stator Diameter   22.0 mm (0.866 in)
    • Stator Thickness   6.0 mm (0.236 in)
    • Number of Stator Slots   9
    • Number of Magnet Poles   6
    • Motor Wind   16 Turn Delta
    • Motor Kv Value   5300 RPM per Volt
    • No Load Current (Io)   2.12 Amps @ 6 Volts
    • Motor Resistance (Rm) per Phase   0.046 Ohms
    • Motor Resistance (Rm) Phase to Phase   0.031 Ohms
    • Maximum Continuous Current   18 Amps
    • Max Continuous Power (2-cell Li-Po)   130 Watts
    • Motor Weight   34.0 grams (1.113 oz.)
    • Outside Diameter   27.9 mm (1.098 in.)
    • Shaft Diameter   2.30 mm (0.117 in.)
    • Motor Body Length   22.6 mm (0.890 in.)
    • Overall Shaft Length   32.9 mm (1.295 in.)

    Included in the Box:

    • 1 x Scorpion HKII-2206-5300KV Motor
    • 3 x Female Connectors
    • 3 x Heat Shrink
    • 4 x M3 Screws

    SKU: HK-2206-5300KV
    €29.00
    inc. VAT

     72HR STOCK
  • Scorpion Commander 15V 45A ESC SBEC (V3)

    Scorpion Commander 15V 45A ESC SBEC (V3)

    The Commander 4S SBEC series ESC(V3) operates from 6 to 17V. It features switching BEC will convert the voltage from your battery packs to 5V to power your receiver and servos. The Commander SBEC will deliver 3 Amps of continuous current with 5 Amps bursts. And can handle up to 4 digital servos or 5 standard servos on fix wing models. With a Switching type BEC, the BEC is not needed to de-rate as the input voltage increases. The full 3 Amps of BEC current is available for input between 2-cell to 4-cell Lipo operation.

    Specifications:

    • Weight (Without Connectors):    44 g (1.55 oz)
    • Max Continuous Current:    45 Amps
    • Operating Voltage Range:    5 to 17 Volts
    • Max BEC Output:    5 Amps @ 5 V
    • On Resistance:    2.33 mOhms
    • Size:    72 x 30 x 8 mm (2.83 x 1.18 x 0.315 in)

    Included in the Box:

    • 1 x Scorpion Commander 15V 45A ESC
    • 1 x Instruction Manual

    Note:

    • *ARE NOT INCLUDED IR Transmitter (Programming Card) & IR RECEIVER
    SKU: 4S-45-SBEC-V3
    €59.90
    inc. VAT

     72HR STOCK
  • Scorpion Commander V 50V 130A ESC (OPTO)

    Scorpion Commander V 50V 130A ESC (OPTO)

    This fifth generation of Scorpion Commander V 50V OPTO series features with new external governor mode (AIR 2) for auto throttle calibration, it also included an external adapter for future firmware update by PC through Commander V link Cable.

    Specifications:

    • Weight (Without Connectors)    184g (6.49 oz)
    • Max Continuous Current    130 Amps
    • Operating Voltage Range    12 to 50 Volts
    • Max BEC Output    No BEC
    • On Resistance    0.68 mOhms
    • Size    89 x 43 x 25.5mm (3.5 x 1.69 x 1.00 in)
    • Weight including packaging: 452g

    SKU: SP-12S-COM130-OPTO
    €249.00
    inc. VAT

     72HR STOCK
  • Scorpion Commander V 59V 160A ESC (OPTO)

    Scorpion Commander V 59V 160A ESC (OPTO)

    This new generation of ESC has power stability to 160Amp and Voltage range up to 59V, 14s LiPo battery! It features an excellent built-in internal governor, and also supports external governor. Commander V 59V 160A ESC is armed with aluminum case in Scorpion signature Gold for better cooling. On top of the ESC, four screw holes are pre-drilled for easy installation for Scorpion Hi-speed Cooling fan. As a result of all these wonderful features, this state of the art Commander V 59V 160A ESC delivers excellent performance and handles extreme continuous current like no other ESC!

    Low Voltage Cut-off (14V to 48V at 1.0V increments) no need to select battery type just set the voltage the ESC should work on, by doing this, the ESC will be compatible with any future type of battery designs.

    LVC= LOW VOLTAGE CUT : 140(14V) TO 480(48V).
    BRK= BRAKE SETTING: 1: NO BRAKE, * 2: VERY SOFT BRAKE, 3: SOFT BRAKE, 4: HARD BRAKE, 5: VERY HARD BRAKE
    AIR= 1: Activate Airplane mode, 2: External Governor mode
    PCT= PROGRAM CUT TYPE (LVC TYPE): 1: CUT 50%*, 2: NO CUT JUST LED WARNING, 3: PULSE WARNING
    MAT= MOTOR ACCELERATION TIME DELAY: 1: 0.15 Seconds* (recommend for AIR 2), 2: 0.3 Seconds, 3: 0.45 Seconds, 4: 0.7 Seconds, 5: 1.3 Seconds
    CAR/B= DISABLED
    COP= CURRENT OVERLOAD PROTECTION: 1: PROTECTION ON*, 2: PROTECTION OFF (CHOOSING OPTION 2 WILL VOID WARRANTY)
    FREQ= DRIVE FREQUENCY: 1: 8 kHz *
    SS= 1: SOFT START WITH OUT GOVERNOR MODE*, 2: SOFT START WITH GOVERNOR
    TIM= MOTOR TIMING: 1: AUTO TIMING*, 2: 5 Degrees (Recommend for GOV 1), 3: 15 Degrees, 4: 20 Degrees, 5: 25 Degrees, 6: 30 Degrees
    P Gain = POWER GAIN: 1 to 11 (SOFT to HARD), DEFAULT: 5*
    I Gain = INTEGRAL GAIN: 1 to 8 (INSENSITIVE to SENSITIVE), DEFAULT: 5*

    Specifications:
     

    • Weight (Without Connectors)    256g (9.03 oz)
    • Max Continuous Current    160 Amps
    • Peak Current    200Amps/1s
    • Operating Voltage Range    14-59V Volts
    • Max BEC Output    No BEC
    • Size    100 x 53 x 25 mm (3.93 x 2.08 x 1.00 in)
    • Included in the Box
    • 1 x Scorpion Commander V 59V 160A ESC (OPTO)
    • 1 x Scorpion IR Transmitter (Programming Card)
    • 1 x Scorpion IR Receiver
    • 1 x Instruction Manual
    • Weight including packaging  520g

     

    SKU: SP-14S-COM160-OPTO
    €360.00
    inc. VAT

     IN STOCK
  • Scorpion Diode Adapter Cable Set for Tribunus ESC

    Scorpion Diode Adapter Cable Set for Tribunus ESC

    Scorpion Diode Adapter Cable Set for Tribunus ESC

    Included in the Box

    • 1 x Scorpion Diode Adapter Cable set
    SKU: Diode_Cable
    €9.90
    inc. VAT

  • Scorpion F3S Edition Shaft Kit 8mm x 34mm

    Scorpion F3S Edition Shaft Kit 8mm x 34mm

    Description:

    Specifications:

    • Custom made motor shaft for Goblin SAB Comet

     

    SKU: HKII-5025-520kv
    €43.99
    inc. VAT

     72HR STOCK
  • Scorpion High Performance Tools Pack (10 pieces)

    Scorpion High Performance Tools Pack (10 pieces)

    Good news to all RC enthusiast, let us introduce to you: Scorpion High Performance Tools.

    We understand how important it is for RC enthusiast to have the tools with you guys on the field. Swapping parts on and off, getting the right parts and setting for your RC car, helicopter or airplane to get the best performance. Scorpion High Performance Tools is designed with RC enthusiast in our mind, the hollow core with aluminum alloy design allow us to make the tools very light weight without losing strength and durability.

    Included in the bag:

    • Scorpion High Performance Tools  1.5mm Hex Driver x1
    • Scorpion High Performance Tools  2.0mm Hex Driver x1
    • Scorpion High Performance Tools  2.5mm Hex Driver x1
    • Scorpion High Performance Tools  3.0mm Hex Driver x1
    • Scorpion High Performance Tools  4.0mm Hex Driver x1
    • Scorpion High Performance Tools  5.5mm Nut Driver x1
    • Scorpion High Performance Tools  7.0mm Nut Driver x1
    • Scorpion High Performance Tools  4.0mm Flat Screwdriver x1
    • Scorpion High Performance Tools  5.0mm Phillips Screwdriver x1
    • Scorpion High Performance Tools  2.0mm Round Head Hex Driver x1

    Specifications:

    Tools bag:

    • 600 Denier Polyester
    • #5 Zipper
    • Velcro Construction
    • PVC Binding
    • Included 10 pcs tools
    • Product Size: 235 x 110 x 30mm (folded)

    Tools:

    • Ultra light weight hollow core design
    • Handle made by Aluminum Alloy
    • Screwdriver head made by HSS(High Speed Steel), build for wear and distortion
    • Anodized aluminum handles with knurled grip
    • Professional quality

    Weight including packaging:

    • 560g
    SKU: TOOLS_PACK_10
    €119.00
    inc. VAT

     LOW STOCK
  • Scorpion HK-22 C-Clip Kit factory replacement C-Clip

    Scorpion HK-22 C-Clip Kit factory replacement C-Clip

    Scorpion HK-22 C-Clip Kit factory replacement C-Clip

    The Scorpion HK-22 C-Clip Kit are the factory replacement C-Clip, washers & set screw for all HK-22 Series Helicopter Motors. (Except HK-2206)

    Included in the Box:

    • 4 x C-Clips
    • 4 x Set Screws
    • 4 x Washers
    SKU: HK-22C-CLIP-KIT
    €2.00
    inc. VAT

  • Scorpion HK-3014-900KV Motor, Goblin 380 special

    Scorpion HK-3014-900KV Motor, Goblin 380 special

    The Scorpion HK-30 series motors have been developed for the newer electric helicopter that are now coming onto the market. This HK-3014-900 KV motor designed to provide long flight time and power that you need to use for Goblin 380, while still maintaining excellent efficiency and cool running characteristics.

    Scorpion HK-30 Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to with stand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    This motors come with 4.0mm male bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shrink tubing. For maximum strength, motors feature an 5 mm diameter at the output shaft to fit standard size pinion gears.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications
    Stator Diameter    30.0 mm(1.181 in)
    Stator Thickness    14.0 mm(0.551 in)
    No.of stator Arms    12
    No.of stator Poles    10
    Motor Wind    11T Turn Delta
    Motor Wire    7-Strand 0.25 mm
    Motor Kv    900KV RPM/Volt
    No-Load Current    (IO/10V) 1.09 Amps
    Motor Resistance(RM)    0.065 Ohms
    Max Continuous Current    28 Amps
    Max Continuous Power    650Watts
    Weight    119 Grams (4.19 oz)
    Outside Diameter    37.5 mm (1.476 in)
    Shaft Diameter    4.98 mm (0.196 in)
    Body Length    34.5 mm (1.358 in)
    Overall Shaft Length    57.0 mm (2.244 in)
    Max. Peak Current    43 Amp (2 Seconds)
    Max. Peak Power    1000 Watts (2 Seconds)
    Max Lipo    6S
    Included in the Box
    1 x Scorpion HK-3014-900KV 5mm shaft motor
    3 x Female Connectors
    3 x Heat Shrink
    4 x M3*0.5 Screws

    SKU: HK-3014-900KV
    €115.00
    inc. VAT

  • Scorpion HK-3020-1000KV Motor, Goblin 380 special

    Scorpion HK-3020-1000KV Motor, Goblin 380 special

    The Scorpion HK-30 series motors have been developed for the newer electric helicopter that are now coming onto the market. This HK-3020-1000 KV motor designed to provide all the crazy power that you even can't imagine for Goblin 380, while still maintaining excellent efficiency and cool running characteristics.

    Scorpion HK-30 Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to with stand high temperatures, making a motor that is virtually impossible to burn up in normal use.

    This motors come with 4.0mm male bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller with matching heat shrink tubing. For maximum strength, motors feature an 5 mm diameter at the output shaft to fit standard size pinion gears.

    Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

    For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

    Specifications

    • Stator Diameter    30.0 mm(1.181 in)
    • Stator Thickness    20.0 mm(0.787 in)
    • No. of stator Arms    12
    • No. of stator Poles    10
    • Motor Wind    6+7 Turn Delta
    • Motor Wire    12-Strand 0.25 mm
    • Motor Kv    1000KV RPM/Volt
    • No-Load Current    (IO/10V) 1.75 Amps
    • Motor Resistance(RM)    0.030 Ohms
    • Max Continuous Current    45 Amps
    • Max Continuous Power    1050 Watts
    • Weight    153 Grams (5.39 oz)
    • Outside Diameter    37.5 mm (1.476 in)
    • Shaft Diameter    4.98 mm (0.196 in)
    • Body Length    40.5 mm (1.594 in)
    • Overall Shaft Length    63.0 mm (2.480 in)
    • Max. Peak Current    70 Amp (2 Seconds)
    • Max. Peak Power    1600Watts (2 Seconds)
    • Max. Lipo    6S
    Included in the Box

    • 1 x Scorpion HK-3020-1000KV 5mm shaft motor
    • 3 x Female Connectors
    • 3 x Heat Shrink
    • 4 x M3*0.5 Screws
    SKU: HK-3020-1000KV
    €109.00
    inc. VAT

  • Scorpion HK-3026 Bearing Maintenance Kit

    Scorpion HK-3026 Bearing Maintenance Kit

    The Scorpion HK-3026 Bearing Maintenance Kit is made by air craft grade aluminum, it provides an easiest and quickest way to Disassemble the Scorpion HK-30 Series Motor.

    SKU: HK-3026-M-Kit
    €19.99
    inc. VAT

     IN STOCK

Manufacturers