Robbe

Robbe
a German company, producer of Shlutter helicopters, Importer and service center for Futaba

www.Robbe.com

Products


  • Gear Set S9201/9202/9304

    Gear Set S9201/9202/9304

    Gear Set For Futaba Servo S9201/9202/9304

    SKU: F1154
    €9.00
    inc. VAT

     LOW STOCK
  • Gear Set S9253/9254

    Gear Set S9253/9254

    Gear Set For Futaba Servo 9253/9254

    SKU: F1375
    €9.00
    inc. VAT

     72HR STOCK
  • Gear set Servo 9257

    Gear set Servo 9257

    Gear set for Servo S 9257
    1-F1399100

    SKU: F1399100
    €9.00 €9.40
    inc. VAT

     72HR STOCK
  • Green Cabin Set Solo Pro 228

    Green Cabin Set Solo Pro 228

    Green Cabin Set for Solopro 228

    SKU: NE251201
    €16.90
    inc. VAT

     LOW STOCK
  • Helicommand Pc interface USB

    Helicommand Pc interface USB

    PC USB interface for Helicommand- Bavarian demon ( All models)

    SKU: RCM16307
    €37.00
    inc. VAT

  • Helicommand Profi

    Helicommand Profi

    Designed for professional usage with industrial helicopters, commercial applications, and machines which are particularly valuable.
    • Particularly smooth and accurate stabilisation when the helicopter is hovering.
    • Positional stability up to altitudes of about 10 m, in winds of up to about 5 m / sec. Also suitable for use in built-up areas.
    • Expanded safe temperature range
    • High-grade fail-safe function (for PCM / FM) with automatic landing if radio link fails.
    • Serial interface for optional ground-link telemetry and for future additional instruments (magnetic compass and GPS)
    • Electronic linearisation with four-servo linkages to guard against mechanical stress
    • Robust, weatherproof aluminium housing with integral vibration / shock absorption features

    High-quality instrumentation for maximum security.
    Essential features include:

    • Four optical imaging systems
    • Triple-axis accelerometers
    • Three high-quality SM gyros
    • Air-pressure altimeter
    • Four micro-processors
    • Second redundant CCD sensor for drift monitoring

    Purchase price includes configuration to the individual helicopter !

    Specification :
    Operating voltage: 4.8 - 6 Volts (4 - 5 NC)
    Current drain: approx. 300 mA at 5 V; approx. 200 mA at 6.5 V
    Weight complete: 230 g
    Dimensions: Height 73 mm, total 85 mm incl. lower protective tube, diameter 74 mm, 61 mm with side flattened

    SKU: RCM19024
    €3599.00
    inc. VAT

  • HEXAGON SPACER

    HEXAGON SPACER

    HEXAGON SPACER

    SKU: S4136
    €8.50 €9.95
    inc. VAT

     LOW STOCK
  • HLW-CLAMP

    HLW-CLAMP

    HLW-CLAMP SPIRIT M-8 PRO

    SKU: S5148
    €2.00 €2.30
    inc. VAT

  • Horizontal Fin Robbe

    Horizontal Fin Robbe

    Horizontal Fin Robbe Futura, Millenium

    SKU: S1020
    €26.80 €31.50
    inc. VAT

     IN STOCK
  • HUB-4 cable with high-current

    HUB-4 cable with high-current

    A 4-way distribution unit for th eS-BUS system with 50 cm long connection to S-BUS receiver.

    Power hungry servos will be connected directly to the HUB-4 and power provided from the unit. Smaller servos with a lower power requirements will be connected directly to the receiver.
    From the the output side, 2 HUB-2 or HUB-3 leads are provided for the wing panels, elevator and rudder servos will be connected via an additional, long HUB-2 lead.
    Other S-BUS servos, such as nosewheel and tow release servos can be connected to the remaining connections.
    The power supply is made via the switch harness 8A, a Limiter or a dual power supply. A compact solution to the S-BUS wiring, which is very powerful and sufficient for a continuous current load of 8A (16A intermittent) to suit the majority of models.
    Power distribution and receiver will be separated within the model, in this manner, whereby the receiver may be located at the optimum reception point, for example within the canopy and the remaining wiring can be placed well within the fuselage.
    A large range of ready-made NiMH and LiPo receiver battery packs, already fitted with the 30A hotmelt-sealed heavy-duty plug, are available for the HUB-4 S-BUS-System.

    more Specification:

    Current rating: Continuous 8A, intermittent 16A.

    SKU: RB8884
    €42.00
    inc. VAT

  • HUB-4 with high-current

    HUB-4 with high-current

    S-BUS 4-way distribution unit with wing connector and stabilised receiver power supply.

    Compact, S-BUS distribution unit fitted with all connectors. The connection to the receiver is made via 50 cm long lead, the voltage is stabilised to 5.9V volts.
    The wing connection is made via a 50 cm long 1mm² lead with lockable wing joiner plugs. For models with thin wing sections, the wing socket will be replaced with 2 servo connector leads. Different lead lengths of 30/50 cm for power models as well as for models with a short wing span and also 50/130 cm for gliders with 4…5 m wingspan are available. Using the HUB-2 lead, the connection of further servos can be made.

    Alternatively, the S-BUS wing mounted socket with 1mm² connector-lead can be used for models with a thicker wing profile. The servo connection is made here using the solder-free S-BUS clamp connectors. Servos can be connected safely in all wing panels without resorting to soldering.
    A total of up to 10 S-BUS-Servos can be directly connected to the HUB4.1, further small servos with lower current needs can be connected direct to the S-BUS-receiver.
    Elevator and rudder servos will be connected using the 120 cm long HUB-2 lead, further servos will be connected via the additional HUB-2 distribution unit.
    The power supply is made via a standardised heavy-duty plug (30A) with hotmelt-sealed connector. Either via the heavy-duty switch harness No. 8892, or alternatively via a commercially available Limiter or a dual power supply.
    Power distribution and receiver will be separated, in this manner, within the model, whereby the receiver may be located at the optimum reception point, for example within the canopy and the remaining wiring can be placed well within the fuselage.
    A large range of ready-made NiMH and LiPo receiver battery packs, already fitted with the 30A hotmelt-sealed heavy-duty plug, are available for the HUB-4.1 S-BUS-System.

    SKU: RB88841000
    €79.90
    inc. VAT

  • Hype Acro Vector ARF Hotliner glider with Vectoric Motor

    Hype Acro Vector ARF Hotliner glider with Vectoric Motor

    Robbe HYPE Acro glider aerobatic - Blue Vector. Imagine planes flying in the sky like a Frisbee? The Acro Vector Hotliner pushes the limits of the physics of flight.

    The model is delivered in ARF version contains, besides the integrated 5 micro servos, powertrain preassembled including brushless motor and the controller. Due to the high level of pre-assembly, the scale model will be assembled and ready to fly in minutes.
    In the sky, you can use its full potential! With the Vector order, the model may enter a spin-controlled flat and evolve in the air like a Frisbee. In normal flight and landing, the Acro Vector hotliner behaves like a perfectly normal. Physical classic flight knows its limits - Acro with Vector, you will go beyond these limits ...!

    Highlights

    • Electric Hotliner Vectoric with innovative engine control
    • One piece wing with carbon reinforcements
    • Brushless motor

    Description

    The front part of the fuselage with the motor is pivoted laterally via a servo. The Vector control is coupled with the rudder via a mixer in the transmitter (activated or not) Thus, you can realize many figures that will amaze both pilots and spectators.

    The fuselage, wing and tail are built in HypoDur® material tested 100,000 times and thus exhibit excellent resistance properties with minimal weight. The wing in one piece is reinforced by several rails made of carbon fiber. Similarly, the fins are respectively reinforced by a separate spar carbon fiber, in order to avoid high speed twisting. In addition to the ailerons, Speed ​​Fins are also mounted and increase efficiency of the control fins.

    The horizontal stabilizer is mounted from below on the fuselage with a central screw. The tail and the elevator posssèdent each a carbon fiber spar.

    The 2450 kV brushless motor is powered by a 3s 11,1V LiPo battery and gives the Acro Vector a fascinating drive power. The motor control is via the regulator SKYWALKER AUBEC 40.

    The control of the Acro Vector is performed on all three axes. Each wing is headed by a separate servo directly installed in the wing. All control surfaces are designed as elastic flaps without slot and thus ensure maximum aerodynamics.

    Features

    • Fuselage, wings and tailplane foam
    • 5 mini-servos installed
    • Brushless electric motor installed
    • Brushless controller installed
    • Cone propeller installed
    • Propeller installed

    Scope of delivery

    • Model
    • Engine
    • Servos
    • Manual.

    Specifications

    • Wingspan 1112 mm
    • Weight 890 g
    • Pre-assembled model model (ARF)
    SKU: 1-029-1070KY
    €209.00
    inc. VAT

     LOW STOCK
  • JST XH 2-8S Balance Charger Expansion Adapter Board with cable

    JST XH 2-8S Balance Charger Expansion Adapter Board with cable

    This is the Multi- Adapter Balancing Board for  JST- XH (Gens ace, ALIGN, Optipower, and so..)
    This adapter allows you to balance a 2S to 8S via one harness.

    Great adapter when you have packs with different cell counts. Eliminates the need to purchase individual harnesses. works with most popular chargers / balancers only.
    Plug only 1 battery in at a time during balancing

    SKU: RB-8214
    €4.60
    inc. VAT

     IN STOCK
  • Landing Skid Draco

    Landing Skid Draco

    Landing Skid Draco
    SKU: NE250702
    €9.50
    inc. VAT

     LOW STOCK
  • Link rod set Solo pro

    Link rod set Solo pro

    Link rod set Solo pro
    SKU: NE250408
    €6.90
    inc. VAT

     IN STOCK
  • LINKAGE D3.5X47

    LINKAGE D3.5X47

    LINKAGE D3.5X47

    SKU: S4890
    €13.30 €15.60
    inc. VAT

     LOW STOCK
  • Lipo balancer adaptor PQ 2-6 S battery

    Lipo balancer adaptor PQ 2-6 S battery

    Equalizer adaptor for battery packs , fits Packs with 2 ... 6 cells

    For connecting LiPo batteries fitted with Polyquest Balance adaptor leads to EH Equalizers( such as robbe)

    SKU: RB-8213
    €4.00
    inc. VAT

     IN STOCK
  • Lipo-Tresor ro-safe M size

    Lipo-Tresor ro-safe M size

    Lipo-Tresor ro-safe M size

    Equipment and qualities fireproof and waterproof resistantly to 840 ° C - at least 30 minutes waterproof also with complete diving safe storage and transportation of Lipo battery practical handle.
    Clip fastener with 2 keys

    Technical data:

    • Outside size: 14.6 x 41 x 32.4 cms (HxBxT)
    • Inside size: 7.4 x 33.6 x 21.8 cms (HxBxT)
    • Weight: 8.60 kgs
    SKU: RB-7001
    €69.90
    inc. VAT

  • LOCK NUT M2 (5 Pcs)

    LOCK NUT M2 (5 Pcs)

    HEXAGON LOCK  NUT M2 5PCS

    SKU: S0010
    €2.60
    inc. VAT

     IN STOCK
  • LOCK NUT M2,5 (10 Pcs)

    LOCK NUT M2,5 (10 Pcs)

    LOCK NUT M2,5 10 PCS.

    SKU: S0009
    €2.90
    inc. VAT

     IN STOCK
  • LOCK NUT M3 (10 Pcs)

    LOCK NUT M3 (10 Pcs)

    LOCK NUT M3 10PCS

    SKU: S0012
    €3.40
    inc. VAT

     IN STOCK
  • LOCK NUT M4 (5 Pcs)

    LOCK NUT M4 (5 Pcs)

    LOCK NUT M4 5PCS

    SKU: S0015
    €2.20
    inc. VAT

     IN STOCK
  • Loctite 648 High strength Retaining Compound- Blue

    Loctite 648 High strength Retaining Compound- Blue

    Loctite 648 high strength, good temperature resistance retainer this is an upgrade for loctite 243

    The ideal adhesive for gluing the shaft and hub. a single-component, removable anaerobic thread locking adhesive. Because Loctite 648 is formulated to be tolerant of oil and other contamination, fasteners can be used as received with no additional cleaning or preparation required before the thread locker is applied.Your benefits Increased temperature resistance Ideal for retaining of parts with a clearance or interference fit, i.e. retaining bushes, bearings, seals, fans, and liners

    Technical Data
    Diametrical clearance: Up to 0.15 mm
    Service temperature range: -55°C to +175°C
    Tensile shear strength: >25 N/mm²
    Fixture time on steel: 3 min.

    SKU: S1307
    €11.00
    inc. VAT

  • Long Nut OS

    Long Nut OS

    Fits the OS /TT /Webra 60-105 motors: ALL versions.
    1 PCS in package

    SKU: S4541
    €11.50 €13.50
    inc. VAT

     IN STOCK

Manufacturers