Robbe

Robbe
a German company, producer of Shlutter helicopters, Importer and service center for Futaba

www.Robbe.com

Products


  • COLD METAL STICK (STEEL OR ALU)

    COLD METAL STICK (STEEL OR ALU)

    COLD METAL STICK (STEEL OR ALU). Two-pack epoxy putty for filling cracks, holes and leaks in fuel containers. Suitable for metal, wood, ceramics, concrete and glass. Can even be used on damp surfaces and under water. Full cure time three hours. Can be sanded and painted once hard.

    Specifications:

    • Working in tempratures of -30°C -- + 150°C. Curing time is 60min.
    • Final resistance is + 50 kg/cm² (after 24 h.)
    • Contents: 56 g
    SKU: Robbe5368
    €10.50
    inc. VAT

     LOW STOCK
  • COLL.PITCH COMPENSATOR

    COLL.PITCH COMPENSATOR

    COLL.PITCH COMPENSATOR ARM

    SKU: S4626
    €3.40 €4.00
    inc. VAT

     IN STOCK
  • COLLAR D5X17

    COLLAR D5X17

    COLLAR D5X17
    SKU: S4679
    €6.00 €7.00
    inc. VAT

     IN STOCK
  • COLLET 5 MM

    COLLET 5 MM

    COLLET 5 MM

    SKU: S0261
    €3.70 €4.40
    inc. VAT

     IN STOCK
  • CONTROL LEVEL

    CONTROL LEVEL

    CONTROL LEVEL F. SHEAR TAIL ROTOR

    SKU: S4334
    €13.50 €15.90
    inc. VAT

     LOW STOCK
  • CONTROL LEVER

    CONTROL LEVER

    CONTROL LEVER WITH BALL, 2 PCS

    SKU: S3533
    €14.90
    inc. VAT

     LOW STOCK
  • CONTROL SLEEVE (2XM)

    CONTROL SLEEVE (2XM)

    CONTROL SLEEVE (2XM2)

    SKU: S4339
    €10.20 €11.95
    inc. VAT

     IN STOCK
  • COUNTERSUNK SCREW 3X5 (4 pcs)

    COUNTERSUNK SCREW 3X5 (4 pcs)

    COUNTERSUNK SCREW 3X5 4PCS
    SKU: S4152
    €1.70 €2.00
    inc. VAT

     IN STOCK
  • Current Sensor 150 A

    Current Sensor 150 A

    The electronic fuel gauge.150

    A current sensor with remaining capacity display for the FASSTest®-Telemetry-System.
    To optimise the model operation and /or a reliable display of the remaining battery capacity. .
    Potential free measurement of the load current with 0.1A resolution.
    An integrated voltmeter for flight battery voltage measurement, ensures an early display/alarm when the battery voltage „softens“.
    Reset button resets display to zero.
    To measure current, one wire is removed between battery and controller and soldered to the internal sensor pad.

    • Measurement range: 1...150 A DC
    • Resolution: 0,1 A
    • Voltage measurement range: 5.5...72 Volt (2...15S)
    • Dimensions: approx. 40 x 30 x 22
    • Weight: approx. 19g
    SKU: F1678
    €98.00
    inc. VAT

  • DAMPER RUBBER

    DAMPER RUBBER

    DAMPER RUBBER, 2 pcs
    SKU: SFH0017
    €4.70 €5.50
    inc. VAT

     LOW STOCK
  • DOME BEARING BLOCK

    DOME BEARING BLOCK

    DOME BEARING BLOCK 8MM assembly
    SKU: S4667
    €22.90 €26.90
    inc. VAT

     IN STOCK
  • DOUBLE DAMPENING

    DOUBLE DAMPENING

    DOUBLE DAMPENING SET  MILL
    SKU: S1077
    €25.10 €29.50
    inc. VAT

     IN STOCK
  • Dowel Brass 6pc.

    Dowel Brass 6pc.

    Dowel Brass 6pc.

    SKU: S2620
    €5.00
    inc. VAT

     LOW STOCK
  • DRIVER YOKE M-8

    DRIVER YOKE M-8

    DRIVER YOKE M-8 PLASTIC

    SKU: S5105
    €1.70 €2.00
    inc. VAT

     LOW STOCK
  • ELEVATOR ARM SET

    ELEVATOR ARM SET

    ELEVATOR ARM SET

    SKU: SFH0027
    €9.30 €10.90
    inc. VAT

     LOW STOCK
  • ENGINE MOUNT SHIMS

    ENGINE MOUNT SHIMS

    ENGINE MOUNT SHIMS
    SKU: S4164
    €8.50 €9.95
    inc. VAT

     IN STOCK
  • EOLO - Alloy Headblock

    EOLO - Alloy Headblock

    A must for turbine smooth high speed running and accurate cyclic response. Crafted from solid in a single fully automated machining operation this headblock is supremely accurate, very strong and light.

    SKU: RCEO-098
    €53.00 €58.00
    inc. VAT

     LOW STOCK
  • EOLO Tail Drive  Block

    EOLO Tail Drive Block

    This component has been designed to prevent movement of the tail drive pinion gear. Often the threads in the original plastic unit are overtightened and damaged resulting in the gear lifting out of correct mesh. Our alloy unit provides secure threads that can be fully tightened time after time. Supplied complete with shorter M2.5 socket screws for minimal weight, new bearings are pre-installed. The completed assembly is no heavier than the stock plastic part.

    SKU: RCEO-099
    €22.00 €24.00
    inc. VAT

     LOW STOCK
  • Equalizer-adaptor TP/FP

    Equalizer-adaptor TP/FP

    For connecting LiPo batteries with Thunder or Flight-Power Balance sensor leads or battery chargers with Equalizer. Can be used with 4 or 8S Equalizers.

    SKU: MU58601
    €5.00
    inc. VAT

     IN STOCK
  • Equalizer-adaptor TP/FP

    Equalizer-adaptor TP/FP

    For connecting LiPo batteries with Thunder or Flight-Power Balance sensor leads to robbe Equalizers or battery chargers with Equalizer.
    Various connecting leads are supplied with the adaptors. Can be used with 5 or 6S Equalizers. Matches the Lipoly Equalizer 5S, the TOP Equalizers 6S, 6S 300 and 12S, and Duo Power 6S, Optimate and Eternity battery chargers

    SKU: RB-8215
    €4.00
    inc. VAT

     IN STOCK
  • FAN WHEEL 90

    FAN WHEEL 90

    FAN WHEEL 90

    SKU: S4870
    €12.90
    inc. VAT

     IN STOCK
  • FEATHERKEY 5X3X10

    FEATHERKEY 5X3X10

    FEATHERKEY 5X3X10

    SKU: S4122
    €2.00
    inc. VAT

     IN STOCK
  • Fiberglass Cloth

    Fiberglass Cloth

    FEATURES: Great for adding strength to surfaces
    90° cross weaves with white coloring
    Consistent weaves for smoother finishes

    INCLUDES: One Medium weight strip 5cm x 100cm)

    SKU: RB5886
    €3.90
    inc. VAT

     IN STOCK
  • FIN MOUNT VERTICAL

    FIN MOUNT VERTICAL

    Fin Mount Vertical
    SKU: S4638
    €7.00
    inc. VAT


Manufacturers