Robbe

Robbe
a German company, producer of Shlutter helicopters, Importer and service center for Futaba

www.Robbe.com

Products


  • BALL BEARING 8X16X5

    BALL BEARING 8X16X5

    BALLBEARING 8X16X5 ZZ

    SKU: S0212
    €13.60 €15.95
    inc. VAT

     LOW STOCK
  • BALL BEARING 8X16X5

    BALL BEARING 8X16X5

    BALL BEARING 8X16X5 ZZ F 1PC

    SKU: S5250
    €5.90 €6.90
    inc. VAT

     IN STOCK
  • BALL BEARING 8X19

    BALL BEARING 8X19

    BALL BEARING 8X19

    SKU: S4287
    €8.50 €9.95
    inc. VAT

     IN STOCK
  • BALL BEARING-SET

    BALL BEARING-SET

    BALL BEARING-SET 4PCS
    SKU: S2829
    €34.00 €39.95
    inc. VAT

     IN STOCK
  • BALL HEAD 3MM M2,5 2PCS

    BALL HEAD 3MM M2,5 2PCS

    BALL HEAD 3MM M2,5 2PCS

    SKU: S3495
    €5.10
    inc. VAT

     IN STOCK
  • BALL HEAD 4mm

    BALL HEAD 4mm

    BALL HEAD 4mm, tread 2mm
    Set of 4
    SKU: S30841
    €3.10
    inc. VAT

     IN STOCK
  • Ball head for Robbe helicopters M2.5 6MM LONG, 2 PCS in set

    Ball head for Robbe helicopters M2.5 6MM LONG, 2 PCS in set

    Ball head for Robbe helicopters M2.5 6MM LONG, 2 PCS in set
    SKU: S4442
    €5.50 €6.90
    inc. VAT

     IN STOCK
  • BALL HEAD M2,5X7,5

    BALL HEAD M2,5X7,5

    BALL HEAD M2,5/7,5 2PCS
    SKU: S4443
    €5.50 €6.50
    inc. VAT

     IN STOCK
  • BALL LINK 8MM

    BALL LINK 8MM

    BALL LINK 8MM

    SKU: S4513
    €12.00 €14.00
    inc. VAT

     IN STOCK
  • BALL LINK WO.BALL

    BALL LINK WO.BALL

    BALL LINK WO.BALL 2,5 2PCS

    SKU: S3083
    €1.70 €2.00
    inc. VAT

     LOW STOCK
  • Ball Linkage Set

    Ball Linkage Set

    Ball Linkage Set, Combat Twister

    SKU: NE250011
    €3.00
    inc. VAT

     IN STOCK
  • BALL ROD D2.6X55

    BALL ROD D2.6X55

    BALL ROD D2.6X55

    SKU: S4889
    €6.50 €7.70
    inc. VAT

     LOW STOCK
  • BALL-END SLEEVE 8MM

    BALL-END SLEEVE 8MM

    BALL-END SLEEVE 8MM 2PCS
    SKU: S4506
    €8.20 €9.60
    inc. VAT

     IN STOCK
  • BEARING BRACKET

    BEARING BRACKET

    Motor BEARING BRACKET 30X30 MONT.

    SKU: S48221
    €25.50 €29.95
    inc. VAT

     IN STOCK
  • BEARING BRACKET ROBBE

    BEARING BRACKET ROBBE

    BEARING BRACKET ROBBE TAIL DRIVE FRONT
    SKU: S4605
    €27.60 €32.50
    inc. VAT

     IN STOCK
  • BEARING BRACKET Sleeve

    BEARING BRACKET Sleeve

    TORQUE TUBE BEARING BRACKET SLEEVE
    SKU: S4750
    €4.30 €5.00
    inc. VAT

     LOW STOCK
  • BELLCRANK FRONT

    BELLCRANK FRONT

    BELLCRANK FRONT BOTH SIDES SE MILL NOVA
    SKU: S4621
    €5.50 €6.50
    inc. VAT

     LOW STOCK
  • BELLCRANK LEFT REAR

    BELLCRANK LEFT REAR

    BELLCRANK LEFT REAR (1) SE MILL NOVA
    SKU: S4619
    €5.50 €6.50
    inc. VAT

     IN STOCK
  • BELLCRANK RIGHT REAR

    BELLCRANK RIGHT REAR

    BELLCRANK RIGHT REAR SE MILL NOVA
    SKU: S4620
    €5.50 €6.50
    inc. VAT

     IN STOCK
  • BELLCRANK SET FUTURA

    BELLCRANK SET FUTURA

    Aluminium bellcrank conversion set for all versions of the , Cuatro, Dyna-x,Futura and the Millennium, and gives your helicopter an improved appearance as well as a more direct swashplate linkage.
    Contains- 4 alu bellcranks+ metal balls,

    Ball bearings and washers can be reused from the plastic set.
    Optional  8 bearings (3x8x3) + shims can be purchased

    SKU: S1042
    €65.00
    inc. VAT

     IN STOCK
  • BEVEL GEAR 15Z M1

    BEVEL GEAR 15Z M1

    BEVEL GEAR 15Z M1

    SKU: S4304
    €22.00 €25.90
    inc. VAT

     IN STOCK
  • Bid Cable 300 mm

    Bid Cable 300 mm

    Cable for BID chips, 300mm

    SKU: RB8474
    €4.00
    inc. VAT

  • BID-CHIP w. CABLE 300 MM

    BID-CHIP w. CABLE 300 MM

    BID System
    A vast array of different battery types is now available to the modeller, and the range is constantly growing larger; the problem is that each battery type requires its "own" charge process. The usual solutions to this are familiar to all of us: either a large number of individual battery chargers, or a universal battery charger - a popular option. Of course, these universal chargers must be set correctly to suit each battery type, and it is necessary to define the cell count, charge current, discharge current etc. manually. It is very easy to lose track of things, forget how to change the settings, or - in the worst case - charge a battery using the wrong settings.

    Which of us hasn`t made this mistake: you need to top up some battery or other in a hurry, you switch the system on with the wrong settings - and in a moment your valuable battery is damaged, or perhaps < even ruined. The revolutionary BID system from robbe now offers an ingenious solution to this problem. BID system stands for Battery IDentification System. A small, lightweight BID chip is assigned to each battery; the chip stores all the relevant data for charging and discharging that pack perfectly.

    When the battery is to be charged or discharged, the BID chip and the battery are connected using a BID battery charger, and the BID system informs the charger of the required parameters. Press the Start button, and the charge or discharge process begins.The special advantages of the BID system are as follows: no tiresome searching through menus for the set-up parameters, maximum protection from mis-handling, and storing of the relevant battery data in the BID chip.
    The BID chip is so small and light (0.5 g) that it can be attached to the battery itself, or fitted inside the heat-shrink sleeve. Sockets at both ends ensure simple handling, and save the weight of extra cables.

    SKU: Robbe8473
    €5.50
    inc. VAT

     LOW STOCK
  • BID-KEY

    BID-KEY

    (Battery Identification system). Simple, safe operation and automatic storing of essential battery data in the robbe BID system. Simply connect the BID key to the charger, and the charge process begins.BID-KEY (Batterie-IDentifikations-System). Utilizzo semplice e sicuro delle batterie e memorizzazione dei loro parametri più importanti nel sistem robbe BID.
    Basta collegare semplicemente il sistema BID al caricabatteria ed avviare la ricarica.

    Since the invention of the Lithium battery the number of different cell types has been rising almost daily. Yesterday we had Lithium-Ion cells with 3.6 Volts, today Lithium-Ion and Lithium-Ion-Polymer types with 3.7 Volts, recently we have seen Lithium-Ferrum cells with 3.3 Volts, and in the pipeline are Lithium-Phosphor cells with 3.6 Volts.

    It is by no means straightforward to keep track of all this, with so many cell types and cut-off voltages.
    It is very easy to forget the type of pack in a model, and also to forget what the settings should be. In a moment the charger is set incorrectly, often with disastrous results. By now most of us have connected a battery for a quick top-up - with the wrong settings - and ended up with a valuable battery which is damaged or even ruined.

    The revolutionary robbe BID system provides an ingenious solution to this problem. The BID key is a small unit which is assigned to an individual battery, and which stores all the important charge parameters for that pack. To charge or discharge the pack all you do is connect it to a BID battery charger; the BID system automatically informs the charger of the correct settings.

    The unit is handled just like the familiar USB memory stick.

    Simply plug the BID key into the charger, and the charge process begins.

    • No tiresome searching through the menu for the set-up parameters

    • Maximum protection from mis-setting

    • The essential battery data is stored in the BID key

    The battery always carries its data around with it - in the BID key:

    BID charge parameters: battery type, cell count, battery capacity, charge current, date of first use.

    BID memory: currently charged-in / discharged capacity, maximum charged-in / discharged capacity, charge cycle count

    SKU: RB-8888
    €2.90
    inc. VAT

     LOW STOCK

Manufacturers