Robbe

Robbe
a German company, producer of Shlutter helicopters, Importer and service center for Futaba

www.Robbe.com

Products


  • R2008SB 2.4 GHz FHSS/S-FHSS

    R2008SB 2.4 GHz FHSS/S-FHSS

    Compact eight-channel FHSS/S-FHSS receiver, compatible with all FHSS and S-FHSS systems in the Futaba range. Also includes High Response mode for digital servos. Fail-safe settings are possible for all channels. As a special feature this receiver offers an S.BUS socket for up to eight S.BUS servos or other devices, in addition to the eight PWM servo outputs. Easy-Link button for simple binding to the transmitter.

    The Futaba R2008SB is a full range 8 channel receiver with built in S-Bus functionality. It also comes equipped to handle high voltage applications (up to 7.4v).

    • High-voltage operation.
    • Frequency-hopping Spread Spectrum design.
    • Dual Antenna Diversity.
    • S.Bus compatibility
    SKU: F1007
    €59.90
    inc. VAT

     IN STOCK
  • R2106GF S-FHSS/FHSS

    R2106GF S-FHSS/FHSS

    Lightweight and small 6-channel 2.4 GHz FHSS / S-FHSS receiver for indoor and park flyers.

    Compatible with all FHSS FHSS and S-systems from Futaba program. Also offers a high response mode for digital servos.
    Failsafe setting for all channels possible. Easy connectivity through Easy Link transmitter button.
    best possible protection from interference by fast frequency hopping. High intermediate frequency of 800 MHz and so insensitive to electromagnetic pollution.
    Not compatible with FASST transmitters!
    SKU: F1005
    €39.90
    inc. VAT

     LOW STOCK
  • REAR BRACE FUTURA

    REAR BRACE FUTURA

    REAR BRACE FUTURA NOVA
    SKU: S4857
    €5.10 €5.95
    inc. VAT

     IN STOCK
  • REAR PROPULSION CLUTCH

    REAR PROPULSION CLUTCH

    REAR PROPULSION CLUTCH

    SKU: S5114
    €4.20 €4.90
    inc. VAT

     LOW STOCK
  • RETAINING RING

    RETAINING RING

    SLOTTED BUSHING SPACER AT T/R HUB
    SKU: S3348
    €7.70 €9.00
    inc. VAT

     IN STOCK
  • RIGID TAIL ROTOR HUB

    RIGID TAIL ROTOR HUB

    RIGID TAIL ROTOR HUB

    SKU: S4630
    €17.00 €19.95
    inc. VAT

     LOW STOCK
  • Robbe Carbon Shroud Holder 2pcs

    Robbe Carbon Shroud Holder 2pcs

    Carbon Shroud Holder 2pcs, fits Robbe helicopters, Millenium, Nova, Cuatro


    SKU: S1036
    €3.00 €10.00
    inc. VAT

     IN STOCK
  • Robbe FS 177 BB MG Servo- Digital 2.6KG

    Robbe FS 177 BB MG Servo- Digital 2.6KG

    The Robbe FS 177 BB MG HV is a modern high-voltage surface-mounted servo in the 9 gram class with an 8mm slim housing. It is made of impact-resistant, tough plastic, which is extremely temperature stable. The motor and digital control electronics meet the highest quality standards.

    The FS 177 BB MG HV is very well suited as a wing servo for ailerons and thanks to its robustness due to high-quality ball bearings also for flaps in thin wing profiles, e.g. on DLG (F3K), pylon models (F5D), but also in electric gliders of the class F5J.
    The servo comes with extremely robust plastic servo arms.

    The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality, you achieve maximum power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio.

    Specifications

    • Working frequence: 1520μs / 330hz
    • Operating Voltage:  DC6~7.4 V
    • Operating Speed (6V): 0.09sec/60°
    • Operating Speed (7.4V): 0.07sec/60°
    • Stall Torque (6V): 2kg.cm
    • Stall Torque (7.4V): 2.6kg.cm
    • Dimensions: 23.5X8X24mm
    • Weight:  9.4g  
    • Connector Wire Length: JR/Futaba 150 mm
    • Bearing: 2BB
    SKU: RB9110
    €21.99
    inc. VAT

     IN STOCK
  • Robbe FS125 BB MG Servo with aluminium housing - Digital (0.13sec/7.21kg)

    Robbe FS125 BB MG Servo with aluminium housing - Digital (0.13sec/7.21kg)

    The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality you achieve a maximum of power, speed, reliability and positioning accuracy.
    The Robbe FS Servo series impresses with its exceptionally good price-performance ratio.

    The Robbe FS 125 BB MG Digital is an extraordinarily strong, robust and flat surface servo with aluminium housing. It has a stable metal gear and ball bearings at the output. It is used in electric and glider models up to 5m wingspan on ailerons and flaps.

    The Robbe FS Servos are high-quality and precisely manufactured steering gears for the RC sector. Due to the high manufacturing standard and the resulting processing quality, you achieve maximum power, speed, reliability and positioning accuracy. The Robbe FS Servo series impresses with its exceptionally good price-performance ratio.

    Specifications

    • Case Centre: Aluminium
    • Main Case: Aluminium
    • Operating Frequency: 1520µs/330hz
    • Water Resistant: No
    • Weight: 26.2g
    • Electric Motor: Brushed
    • Dimensions: 30 x 10 x 35.5mm
    • Voltage: 4.8 - 6.0v
    • Speed: 0.16 sec @ 4.8v
    • Speed: 0.13 sec @6.0v
    • Torque: 5.85kg /cm @4.8v
    • Torque: 7.21 kg/cm @ 6.0v
    • Gear Type: Aluminium w/TiCn + brass
    • Bearings: Twin BB
    SKU: RB9100
    €31.90
    inc. VAT

     IN STOCK
  • ROBBE Lipo-Tresor ro-safe L Size

    ROBBE Lipo-Tresor ro-safe L Size

    Lipo-Tresor ro-safe L size

    Equipment and qualities fireproof and waterproof resistantly to 840 ° C - at least 30 minutes waterproof also with complete diving safe storage and transportation of Lipo battery practical handle.

    • fireproof and waterproof
    • resistant to 840° C - at least 30 minutes
    • watertight even when completely immersed
    • safe storage of Lipo batteries
    • clamp lock with 2 keys
    • external dimensions: 33 x 41 x 32.4 cm (HxWxD)
    • Inside dimensions: 25 x 31 x 22 cm (HxWxD)
    • weight 16.90 kg
    SKU: RB-7002
    €113.99
    inc. VAT

     72HR STOCK
  • Robbe Mains PSU 1200 Watt 50A

    Robbe Mains PSU 1200 Watt 50A

    Mains PSU 1200 Watt 50A 

    Powerful 1200 Watt mains PSU, with user-variable output voltage and digital display of voltage and current.
    The input voltage range is 100...240 V, and the mains lead plugs into the unit, making it extremely versatile.
    The output voltage can be adjusted within the range 15....30 Volt DC, and the maximum current is 50 A. The unit‘s total continuous power is 1200 Watt.
    The electrical energy is transferred to consumer units such as battery chargers via four sockets, three of which are switchable.
    The mains PSU also features two USB outputs with a total capacity of 5 V / 2.1 A - ideal for charging devices such as tablets, smart phones, digital cameras, etc.

    Specification:

    • Input voltage: 100...240 V AC 50/60 Hz
    • Output voltage: 15...30 V DC
    • Load current: 50 A DC
    • Output power: 1200 W
    • Dimensions: 305 x 170 x 85 mm
    • Weight: 3 kg
    • Over-temperature guard
    • Current overload protection
    • Short-circuit protection
    SKU: RB-8136
    €269.00
    inc. VAT

  • ROBBE RO-POXY 10 MINUTE EPOXY RESIN ADHESIVE 190G

    ROBBE RO-POXY 10 MINUTE EPOXY RESIN ADHESIVE 190G

    RO-Poxy

    - Robbe 10 Minuten EPOXY is ideal for permanent bonding of many materials.
    - It has a high adhesive strength, is tough-hard and can be ground.
    - Materials suitable for bonding: Wood, metals, stone, plastics (GFK/CFK), leather, cardboard and others.
    - Sand and degrease surfaces before bonding.
    - As Robbe is solvent-free for 10 minutes, EPOXY does not attack sensitive foams such as Styropor, Depron, etc. Components made of EPP rigid foam or ABS can be bonded very well if superglue is applied to the surface to be bonded beforehand.

    - Safety: Seal 10 minutes EPOXY must not get into the hands of children. Please keep out of reach of children.

    SKU: RB-50604
    €12.00
    inc. VAT

     IN STOCK
  • ROBBE RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY

    ROBBE RO-SAFETY XL LIPO SAFE TRANSPORT AND CHARGING CASE FOR LIPO BATTERY

    Everybody knows the dangers of LiPo batteries. Some of them have burned through your bags and containers and everyone knows how dangerous that can be. The RO-SAFETY is THE protection for LiPo batteries, which WORKS. Developed by Tom Mast, a renowned aeronautical engineer and enthusiastic model pilot. The thought came to him when his house almost went up in flames from a LiPo fire.

    The ro-safety is designed in such a way that the batteries can be charged and stored naturally. The charging cables are led outwards through a flameproof opening. In case of fire of the batteries, the resulting pressure inside the batteries can escape to the outside. This is done through the upper ventilation holes, at the same time the smoke is filtered so that no harmful substances are released to the outside. Inside the box, up to 800° can occur in a fire.
    Thanks to the special insulation of the box, the floor and side wall can be heated up to a maximum of 80°. The escaping gas does not become hotter than 150°.

    Maximum stock quantity:
    You can charge and store up to a 6pc 6S 5000mAh equivalent (1100Wh) safely inside the Ro-Safety Xl.

    An effective and safe protection against LiPo fires!

    Inside dimensions: 250mmx165mmx100mm

    BOX CONTENTS

    • Ro-Safety XL Lipo Safe
    • Internal dimensions: 250/165/380 mm
    SKU: RB-7004
    €114.99
    inc. VAT

     LOW STOCK
  • Robbe Special metal Bearing Oil 8Ml

    Robbe Special metal Bearing Oil 8Ml

    Special Bearing Oil

    A must to use with Ball Bearings and any metal part in friction
    Absolutely essential for model helicopters and cars, also for all other applications

    Content: 8ml

    SKU: RB-5531
    €15.80
    inc. VAT

     IN STOCK
  • Robbe TEFLON precision grease - 1 pc

    Robbe TEFLON precision grease - 1 pc

    ROBBE TEFLON GREASE 25G

    All-purpose grease supplied in practical jet-applicator; ideal for the modeller.

    - friction and wear reduced five-fold
    - extra safety margin
    - suitable for plastic and metal
    - useful life of parts extended up to 200%
    - resistant to fuel and ageing
    - temperature range -15°C to + 250°C

    Applications:
    - Plastic and metal differentials
    - gears
    - transmissions
    - chains
    - wheel bearings
    - needle roller bearings

    SKU: Robbe5532
    €16.99
    inc. VAT

     IN STOCK
  • ROD M2x138

    ROD M2x138

    ROD M2x138
    SKU: S3444
    €3.80 €4.50
    inc. VAT

     IN STOCK
  • Ropoxi Glue 5min 2x100gr

    Ropoxi Glue 5min 2x100gr

    5-minute epoxy glue

    • 1:1 mixing ratio for ease of use.
    • The adhesive produces tough, high-strength joints in wood, metal and various plastics.
    • Approx. 5 minutes working time at 24°C.
    • Sets hard in about 10 minutes at 24°C.
    • Full cure in 2-3 hours at 24°C.
    SKU: RB-5070
    €13.99
    inc. VAT

  • Rotor Clip Pin

    Rotor Clip Pin

    Rotor Clip fixed Pin, Solo Pro /328

    SKU: NE250205
    €3.90
    inc. VAT

     LOW STOCK
  • ROTOR SHAFT PIVOT

    ROTOR SHAFT PIVOT

    ROTOR SHAFT PIVOT BRACKET D28X45 M

    SKU: S5028
    €25.40 €29.90
    inc. VAT

     LOW STOCK
  • ROTORHEAD HUB (for 10mm shaft)

    ROTORHEAD HUB (for 10mm shaft)

    ROTORHEAD HUB (for 10mm shaft)

    SKU: S4646
    €39.00 €59.95
    inc. VAT

     IN STOCK
  • RUBBER GROMMET

    RUBBER GROMMET

    RUBBER GROMMET, 2.8/7OX5/3.8X1

    SKU: S5199
    €2.90 €3.40
    inc. VAT

     LOW STOCK
  • S 3155 NANO SPEED DIGITAL

    S 3155 NANO SPEED DIGITAL

    Nano-size digital servo: a high-speed “sister servo” for the proven S 3150 digital unit. The robust five-stage gearbox features four metal gears; two widely spaced ballraces brace the output gear highly effectively against radial forces.
    An ideal wing-mounting servo, even for quite large gliders and competition machines, as well as mini and micro-helicopters. Although designed for four-cell operation, the servo can also be used with a BEC circuit or with up to 6 Volts with a 6-Volt limiter and a battery backer.

    Dimensions: 30 x 10,8 x 29 mm
    Mass/weight: 20.40 pond/g
    Operating voltage: 4.8...6 Volts
    Nominal voltage: 4.80 Volts
    Torque: 20.00 Ncm
    Transit speed: 0.12 Sec/45°
    Holding power: 50.00 Ncm

    SKU: F1387
    €41.00
    inc. VAT

     72HR STOCK
  • S-BUS Cable 150cm, 1mm

    S-BUS Cable 150cm, 1mm

    Sturdy, 3 x 1mm² thick S-BUS-ribbon cable connector lead with heavy duty gold 3 pole plug. Highly flexible with a lighweight, thin-wall thickness insulation.
    For the installation of S-BUS-wiring in fuselage or wings. The plug connection is made in output A or B of the battery backer., PSS 2018.
    The polarised plug has a lock, which ensures a reliable contact, but is also easily released.
    To connect servos and other peripheral devices, the S-BUS-terminal blocks with or without a PWM-Adapter are necessary (F 1690 or F 1691).

    SKU: F1681
    €9.90
    inc. VAT

     72HR STOCK
  • S-BUS Cable 4xPWM

    S-BUS Cable 4xPWM

    Allow the fitting of the new S-BUS system to existing models and servos. To connect between 2-4 wing servos to an S-BUS output. Converts the signal for each separate output from S-BUS to PWM. Each servo is addressable by the adapter, the outputs can have the same or different channel numbers
    The channel number allocation is made with the S-BUS Programmer SBC-1 (Nr. F1696) and no PC required.

    3-pole gold-conatact plug with lock
    Wire cross-sectional area 1mm²
    Lead length 50 cm

    SKU: F1680
    €49.90
    inc. VAT

     72HR STOCK

Manufacturers