RJX Hobby

RJX Hobby

RJX is a producer of fine Nitro and electric helis. The owner is German engineer, and he make the design and QC, production made in China, this way you have good quality to price combination

Products


  • RJX Metal Nipple & Rubber Grommet for RJX & Raptor Header Tank

    RJX Metal Nipple & Rubber Grommet for RJX & Raptor Header Tank

    Specifications:

    • Length: 28.5mm
    • ID: 2mm
    • Net Weight: 2.4g
    • Gross Weight: 10g
    • Color: Silver

    Features:

    • OD: 7mm
    • Material: Aluminum
    • Replacement Tank Nipple.
    • If your header tank or main tank is leaking you can now change the seal without have to replace the whole tank.
    • Note, it will fit all RJX tanks, and "some" other brand tanks as well.

    Package Included:

    •  1 x Metal Nipple & Rubber Grommet
    SKU: HA1207
    €4.99
    inc. VAT

  • RJX METAL Tailboom Extreme 90

    RJX METAL Tailboom Extreme 90

    RJX ALUMINIUM Tailboom Extreme 90 800M LENGTH, 2 PCS in set

    Size: D22 x 800mm

    SKU: XT90-83091
    €13.00
    inc. VAT

     IN STOCK
  • RJX Plastic Standard Servo plates 10 pcs

    RJX Plastic Standard Servo plates 10 pcs

    RJX Plastic Standard Servo plates 10 pcs

    SKU: HN70104
    €6.00
    inc. VAT

     IN STOCK
  • RJX Q3003 2204 2300KV brushless motor-set for CAOS 330 (4pcs)

    RJX Q3003 2204 2300KV brushless motor-set for CAOS 330 (4pcs)

    RJX Q3003 2204 2300KV brushless motor-set for CAOS 330 (4pcs)

    The RJX Q3003 2204 2300KV brushless motor is designed on the basis of previous RJX 2204 motor, it adopts integrated motor-cap design, so the cost price is reduced, that`s why it is a little bit cheaper than the previous ARRIS 2204 motor.

    However, don`t take it for granted that this Q3003 brushless motor has poor flying performance, conversely, after hundreds of flying tests, we found this new Q3003 brushless motor even performs better than the old one through working with our 20A brushless ESC.

    The Q3003 2204 2300KV brushless motor is suitable for 200-300 sizes multirotors, light weight fixed-wing copter, indoor 3D airplane. Weighs only 27g. It offers great performance at affordable price. Each motor is carefully balanced and tested before shipped out from factory.

    Specification:

    • KV: 2300KV
    • Motor Dimension(Dia*Len): 39.5mm x 28mm
    • Configu-ration: 12N14P
    • Weight(g): 27g
    • Stator Diameter: 22mm
    • Stator Length: 4mm
    • Shaft Diameter: 3mm
    • Support Voltage: 2-4S
    • Plug Wire Length: 2mm
    SKU: RJX-D2204-2300KV-SET
    €45.00
    inc. VAT

  • RJX Quick Release Propeller Guard Bumper Protectors for DJI Mavic Pro - Grey

    RJX Quick Release Propeller Guard Bumper Protectors for DJI Mavic Pro - Grey

    RJX Quick Release Propeller Guard Bumper Protectors for DJI Mavic Pro - Grey

    Features:

    • Lightweight and durable, Easy snap on/off, tool-free.
    • Compatibility: 4PCS Quick Release Propeller Guards Bumper Protectors For DJI Mavic Pro Drone ,No Obstacle Avoidance Interference - Gray.
    • Advantage: With these prop guards, you will never break your props and crash your Phantom by accident bump into trees, walls, or any other obstacles.
    • Material: The strongest DJI Mavic Pro propeller guard on the market. Made of ultra-strong poly carbon plastic. Flexible yet unbreakable.
    • Package Includes: Grey Propeller Guards for DJI Mavic Pro*4 (Drone and propeller and other accessories are not included).

     

    SKU: RJX1393
    €15.99
    inc. VAT

     IN STOCK
  • RJX RAZOR Orange 690mm Premium CF Blades-FBL Version

    RJX RAZOR Orange 690mm Premium CF Blades-FBL Version

    RJX RAZOR Orange 690mm Premium CF Blades-FBL Version
    SKU: RJXV690O
    €89.00
    inc. VAT

     72HR STOCK
  • RJX Red and White 105mm Tail CF Blades

    RJX Red and White 105mm Tail CF Blades

    RJX Red and White 105mm Tail CF Blades

    Compatible with 690 until 800
    SKU: HA105WR
    €19.99
    inc. VAT

  • RJX RUBBER GROMMET 8MM BLACK (10pcs) for 85-100mm FPV frame

    RJX RUBBER GROMMET 8MM BLACK (10pcs) for 85-100mm FPV frame

    RJX RUBBER GROMMET 8MM BLACK (10pcs) for 85-100mm FPV frame

    Fits SP Racing F3 Brush PDB Quadcopter frame kit, Tiny Woop, etc...

    SKU: RJX1340
    €1.90
    inc. VAT

     IN STOCK
  • RJX Vector 430MM Carbon main blades Green color

    RJX Vector 430MM Carbon main blades Green color

    High Quality Carbon  Fiber Main Blades for 500 size helicopters (430mm)

    Those blades are optimized for Flybarless Helicopters, made from Carbon Fiber, and providing perfect visibility in the air due the very clear color scheme.

    Specifications:

    • Vector 430mm FBL Green main blades
    • Width:43 mm
    • Root thickness : 10mm
    • Bolt Hole : 3mm
    • Weight +-60gr
    SKU: V430G
    €39.00
    inc. VAT

     IN STOCK
  • RJX Vector 700 105mm Carbon tail Blades

    RJX Vector 700 105mm Carbon tail Blades

    105mm Carbon tail Blades for RJX Vector 700

    SKU: V105GW
    €19.90
    inc. VAT

  • RJX Vector 700 Battery Tray

    RJX Vector 700 Battery Tray

    Battery Tray for RJX Vector 700

    SKU: V9008
    €25.00
    inc. VAT

     LOW STOCK
  • RJX Vector Green and White 70mm Tail CF Blades

    RJX Vector Green and White 70mm Tail CF Blades

    RJX Vector Green and White 70mm Tail CF Blades

    SKU: V70GW
    €13.50
    inc. VAT

  • RJX Vector Sport VS700 Flybarless Helicopter GREEN canopy

    RJX Vector Sport VS700 Flybarless Helicopter GREEN canopy

    RJX Vector Sport VS700 Flybarless Helicopter is same Famous Vector 700, without full size fuselage, Sport version.

    Features:

    • Painted Canopy
    • Molded Full Carbon Landingskids
    • Molded Full Carbon Tail Fin
    • Full Carbon Fiber Frames
    • 28T and 30T Motor Pulley with 8mm 6mm Sleeve Included
    • 30mm Full Carbon Tailboom
    • 12mm Mainshaft
    • 10mm Rotorhead Spindle with large Thrust Bearings
    • Unique full ballraced Swashplate Antirotation System
    • 3 Mainshaft Bearing Supports with extra large Bearings
    • Easy to use Battery Slide System
    • 2 Stage Belt Driven Power Drive with extra large 20mm S3M Motorbelt
    • Double Oneway and double Support Bearings in the Autorotation Unit
    • Motor Belt Tension System...just with 1 Screwdriver for very easy setup of the Motor Belt
    • Tail Belt with Shock Dampener for always perfect Tension
    • Extra large Tailcase with 6x19x6 Bearings for Tailshaft
    • 4 Belt Guides and large Belt Pulleys for hardcore Tail Performance
    • Tail Servo Mount on Tailboom Holder
    • 6mm Carbon Tail Control Rod for precise Tail control

    Included in Kit:

    • Full Assembly Kit RJX VECTOR Sport with Green Canopy
    • 690mm Carbon Mainblades
    • 105mm Carbon Tailblades
    • Blade Caddy
    • Battery Straps
    SKU: VS700O
    €799.00
    inc. VAT

     72HR STOCK
  • RJX Vector Sport VS700 Flybarless Helicopter Orange canopy

    RJX Vector Sport VS700 Flybarless Helicopter Orange canopy

    RJX Vector Sport VS700 Flybarless Helicopter is same Famous Vector 700, without full size fuselage, Sport version.

    Features:

    • Painted Canopy
    • Molded Full Carbon Landingskids
    • Molded Full Carbon Tail Fin
    • Full Carbon Fiber Frames
    • 28T and 30T Motor Pulley with 8mm 6mm Sleeve Included
    • 30mm Full Carbon Tailboom
    • 12mm Mainshaft
    • 10mm Rotorhead Spindle with large Thrust Bearings
    • Unique full ballraced Swashplate Antirotation System
    • 3 Mainshaft Bearing Supports with extra large Bearings
    • Easy to use Battery Slide System
    • 2 Stage Belt Driven Power Drive with extra large 20mm S3M Motorbelt
    • Double Oneway and double Support Bearings in the Autorotation Unit
    • Motor Belt Tension System...just with 1 Screwdriver for very easy setup of the Motor Belt
    • Tail Belt with Shock Dampener for always perfect Tension
    • Extra large Tailcase with 6x19x6 Bearings for Tailshaft
    • 4 Belt Guides and large Belt Pulleys for hardcore Tail Performance
    • Tail Servo Mount on Tailboom Holder
    • 6mm Carbon Tail Control Rod for precise Tail control

    Included in Kit:

    • Full Assembly Kit RJX VECTOR Sport with Orange Canopy
    • 690mm Carbon Mainblades
    • 105mm Carbon Tailblades
    • Blade Caddy
    • Battery Straps
    SKU: VS700OR
    €799.00
    inc. VAT

     72HR STOCK
  • RJX XT50/90 Canopy Black BLUE

    RJX XT50/90 Canopy Black BLUE

    RJX XT50 Canopy Black BLUE , RJX 50-600 SIZE
    SKU: XT90-82276BB
    €65.00
    inc. VAT

     LOW STOCK
  • RJX XT60 Aluminium housing

    RJX XT60 Aluminium housing

    RJX XT60 Alum Mounting housing

    SKU: RJX-Q3043
    €2.50
    inc. VAT

     IN STOCK
  • RJX XT90 Canopy (lime yellow)

    RJX XT90 Canopy (lime yellow)

    High quality , beautifully painted canopy for XT90 (lime yellow)

    SKU: XT90-82276LY
    €65.00
    inc. VAT

  • RJX XT90 Canopy (Red)

    RJX XT90 Canopy (Red)

    Painted Canopy (Red) - RJX 90 ALL
    SKU: XT90-82276R
    €65.00
    inc. VAT

     72HR STOCK
  • RJX XT90 Canopy Black

    RJX XT90 Canopy Black

    Painted Canopy (Black) - RJX 90 ALL
    SKU: XT90-82276BLA
    €65.00
    inc. VAT

     LOW STOCK
  • RJX XT90 Canopy Blue

    RJX XT90 Canopy Blue

    Painted Canopy (Blue) - RJX 90 ALL
    SKU: XT90-82276B
    €65.00
    inc. VAT

  • RJX XT90 Canopy Yellow

    RJX XT90 Canopy Yellow

    Painted Canopy (Yellow) - RJX 90 ALL
    SKU: XT90-82276Y
    €65.00
    inc. VAT

     LOW STOCK
  • Rotor Head (8mm)

    Rotor Head (8mm)

    This is complete metal head. This is RjX's 8mm option head with over 15 different ajustments from very stable to Xtreme 3D flight.
    Uses a 4mm flybar and can be used on any heli using a 10mm main shaft.

    SKU: X50-0002
    €99.00
    inc. VAT

  • Rubber dampner 70D

    Rubber dampner 70D

    Special dampners, 70 DURO, for NORMAL 3D, for 90 size head and flybarless heads

    SKU: XT90-61107-70C
    €6.00
    inc. VAT

     IN STOCK
  • Rubber dampner 90D

    Rubber dampner 90D

    Special dampners for Hard 3d, for 90 size head and flybarless heads

    SKU: XT90-61107-90
    €6.00
    inc. VAT

     IN STOCK

Manufacturers