Europe based Mega-Store of RC Helicopters, Drones, Planes
New Arrivals
CUAV X7+ Flight Controller Autopilot For PX4&APM Drone UAV
X7+ autopilot uses STM32H743 series processors CPU, Cortex-M7 core (with double precision Floating-Point Unit). It makes operating frequency increase to 480Mhz, 2MB Flash,1MB RAM,Meet the higher computing needs of flight controllers Compared with the STM32F7 product line, the dynamic power consumption efficiency is doubled. The sensor is one of the important indicators to evaluate the flight controller. This time, we have added the ICM-42688-P sensor. Compared with the traditional consumer IMU, the noise figure of ICM-42688-P is reduced by 40%, and the temperature stability is improved 2 times, so as to ensure the highest accuracy measurement in the case of temperature changes. Sensor Redundancy Design Built-in three sets of accelerometers and gyroscopes, the flight controller monitors the data of multiple sensors in real time, and executes redundant switching immediately in case of failure to improve flight safety and stability. Temperature Compensation System The built-in high-precision sensor temperature compensation system makes the sensor work at a constant temperature, ensuring that the sensor can operate stably with high precision and sensitivity in high and low temperature environments. CORE Separate Design The X7+ flight controller integrates the main MCU and IMU into the CORE module and can be sold separately. Users can design the baseboard according to the UAV structure to meet the individual needs of users, or purchase our CAN PDB baseboard for use. The X7+ CORE interface is compatible with X7, X7 Pro, and V5+ flight controller CORE. Better CUAV Patented Shock Absorption System After dozens of iterations, hundreds of shock-absorbing materials have been tested and verified, computer model analysis and thousands of flight tests, so improve the shock absorption to a further level Standard Pack Digital Power Module Standard package include UAVCAN protocol digital power detection module, using CUAV independent R&D ITT algorithm, accurate measurement of UAV real-time voltage and current, making flight time estimation more reliable. Firmware: Note:X7+ flight controller is compatible with ArduPilot 4.10/ PX4 1.12.3 or higher firmware. Copter/Plane, Support all models: Copter/Plane/ Helicopter/VTOL/unmanned vehicle/ Rover, etc. Specifications Main FMU Processor: STM32H743 On-board sensors: Accelerometer/Gyroscope: ICM-42688-P(X7:BMI088) Accelerometer/Gyroscope: ICM-20689 Accelerometer/Gyroscope: ICM-20689(X7:ICM-20649) Magnetometer: RM3100 Barometer: MS5611*2 Interfaces: 14 PWM outputs (12 supports Dshot) Support multiple RC inputs (SBUs/CPPM/DSM) Analogue/ PWM RSSI input 2 GPS ports(GPS and UART4 ports) 6 i2c buses(Four i2c dedicated ports) 2 CAN bus ports 2 Power ports(Power A is common adc interface, Power C is uavcan battery interface) 1 ADC intput 1 USB ports Power System: Power: 4.5~5.4V USB Input: 4.75~5.25V Servo Rail Input: 0~10V Weight and Dimensions: Weight: 101 g Other Characteristics: Operating temperature: -20 ~ 85°c Three imus Supports temperature compensation Internal shock absorption x7 plus pinouts CUAV X7+ Features: 1–Built-in shock absorption 2–3 sets of Imus support intelligent failover 3–Support temperature compensation 4–Support CAN ammeter 5–Modular design, support custom baseboard |
€399.00
Inc. VATKavan Radio Transmitter V20 - Black, 24-channel ACCST Hall sensors
Advanced 24-channel RC set Twin 2.4GHz/ACCST D16/ACCESS. Ergonomic robust body, precision gimbals with Hall sensors. Full telemetry support, large color touch screen with intuitive user interface. ETHOSâ„¢ operating system. Extensive range of functions and mixes for all types of RC models. KAVAN servo programming. Support for telemetry receivers with classic PWM and S.BUS outputs. Exactly according to preference The rigorously CNC-machined aluminum gimbals are mounted on 10 ball bearings. Hall sensors instead of conventional potentiometers sense the movement of the sticks. This makes the control more precise and reliable. You can also customize the controllers to your own preferences. Easily adjust the length of the sticks, rotate the gimbals up to 8°, and limit the range of stick travel to 45° to 60°. Comfortable and stylish Looks matter. Comfort matters even more. The gimbals are closer to the edges of the transmitter body for a comfortable and secure grip. Both handheld and when using the. Switches, buttons, dials and trims are always within reach. So you don't have to take your eyes off your model for a second. But the stylish and vigorous exterior of the transmitter tempts you to do so. Don't get jammed The 2.4GHz simultaneous dual-frequency transmission system communicates simultaneously with both the receiver and the RF module. The two built-in 2.4GHz antennas have greater omnidirectional coverage for the transmitted signal compared to a single antenna. This makes the transmission uninterrupted and has a rapid response time of under 4 ms. Data (including telemetry) will flow safely to you over several kilometers. Touch the colors The large color touchscreen has a resolution of 800Ă—480 px on a 4.3" diagonal. It displays the ETHOSâ„¢ operating system environment. With adjustable display brightness, you won't get lost in the dark or directly under the sun. Intuitively, clearly, and most importantly, conveniently set up or display everything from basic telemetry to advanced mixes and curves directly in the transmitter. You can even choose the colour scheme or turn on dark mode and read everything in English or many other languages Connectivity for an easier life Use the USB serial port for data transfer, battery charging, and even if you want to fly the simulator. And because it's USB-C, you always plug it in on the first try. Of course, there's also a trainer port, headphone jack or microSD card slot. Besides audio or voice alerts, you can also activate vibration feedback. Plugging in a single connector is more elegant than searching for identical (and charged) batteries. The included 2S LiPo 4000mAh battery provides 6.5–8.4V power. It can be safely charged with a USB-C cable thanks to the built-in balancer. No need to remove it from the case. The available timer and warning signals take care of early warning of running out of power. |
€599.00
Inc. VATKavan Radio Transmitter V20 - Blue, 24-channel ACCST Hall sensors
Advanced 24-channel RC set Twin 2.4GHz/ACCST D16/ACCESS. Ergonomic robust body, precision gimbals with Hall sensors. Full telemetry support, large color touch screen with intuitive user interface. ETHOSâ„¢ operating system. Extensive range of functions and mixes for all types of RC models. KAVAN servo programming. Support for telemetry receivers with classic PWM and S.BUS outputs. Exactly according to preference The rigorously CNC-machined aluminum gimbals are mounted on 10 ball bearings. Hall sensors instead of conventional potentiometers sense the movement of the sticks. This makes the control more precise and reliable. You can also customize the controllers to your own preferences. Easily adjust the length of the sticks, rotate the gimbals up to 8°, and limit the range of stick travel to 45° to 60°. Comfortable and stylish Looks matter. Comfort matters even more. The gimbals are closer to the edges of the transmitter body for a comfortable and secure grip. Both handheld and when using the. Switches, buttons, dials and trims are always within reach. So you don't have to take your eyes off your model for a second. But the stylish and vigorous exterior of the transmitter tempts you to do so. Don't get jammed The 2.4GHz simultaneous dual-frequency transmission system communicates simultaneously with both the receiver and the RF module. The two built-in 2.4GHz antennas have greater omnidirectional coverage for the transmitted signal compared to a single antenna. This makes the transmission uninterrupted and has a rapid response time of under 4 ms. Data (including telemetry) will flow safely to you over several kilometers. Touch the colors The large color touchscreen has a resolution of 800Ă—480 px on a 4.3" diagonal. It displays the ETHOSâ„¢ operating system environment. With adjustable display brightness, you won't get lost in the dark or directly under the sun. Intuitively, clearly, and most importantly, conveniently set up or display everything from basic telemetry to advanced mixes and curves directly in the transmitter. You can even choose the colour scheme or turn on dark mode and read everything in English or many other languages Connectivity for an easier life Use the USB serial port for data transfer, battery charging, and even if you want to fly the simulator. And because it's USB-C, you always plug it in on the first try. Of course, there's also a trainer port, headphone jack or microSD card slot. Besides audio or voice alerts, you can also activate vibration feedback. Plugging in a single connector is more elegant than searching for identical (and charged) batteries. The included 2S LiPo 4000mAh battery provides 6.5–8.4V power. It can be safely charged with a USB-C cable thanks to the built-in balancer. No need to remove it from the case. The available timer and warning signals take care of early warning of running out of power. |
€599.00
Inc. VATCUAV Skye DroneCAN Air Speed Sensor Module (Heated Pitot)
The first in the industry to integrate pitot tube, airspeed sensor, temperature and humidity sensor, ARM M4 processor, and dual temperature control system into one structure, and has rainproof performance. The pitot tube integrates a high-power 35W heating system, which automatically heats according to the ambient temperature and humidity, avoiding data errors caused by pitot tubes freezing or rain blocking, and greatly improving the reliability of UAV operations. Features
|
€194.00
Inc. VATCUAV CAN PMU UAV power management module 62v 110A
CAN PMU is a UAV power management unit module with built-in STM32F4 processor and running CUAV ITT algorithm. It can accurately measure UAV voltage and current in real time. It can support 6-62V voltage and 110A current at maximum, and can output 5.4V 8A. The flight controller is powered by CAN bus communication and supports the standard UAV CAN protocol. Each PMU unit is factory calibrated to ensure good consistency and high accuracy Features:
|
€129.00
Inc. VATCUAV X7+ Pro Industrial ADIS16470 Autopilot ARM STM32H7
X7+ Pro is an advanced autopilot independently designed by CUAV. It uses a higher-performance STM32H7 processor and integrates industrial-grade sensors and ultra-low temperature drift sensors. Compared with the previous flight controller,it has better performance and more reliability. This board can run ArduPilot firmware perfectly. X7+ Pro is ideal for industrial drones. Faster than ever CUAV X7+ Pro autopilot use STM32H7 series processors, CPU operating frequency increased to 480Mhz, storage 1024K, FLASH 2048K, has a faster processor and larger storage, and uses 512K EEPROM, can expand waypoints to 2048, Bring more imagination to flight applications Built-in shock absorption design CUAV X7+ Pro flight controllers have a built-in and reliable CUAV patented shock absorption system, making them fearless of flight jitter! Adapt to harsh environment CUAV X7+ Pro autopilot adopts numerous car-level chips and has a built-in high-precision sensor temperature compensation system, which makes the sensor work at a constant temperature to ensure that the sensor can operate with high accuracy and high sensitivity in high and low temperature environments. Always stable Invensense + Bosch + ADI + TE series sensors are used, which have lower noise and stronger anti-shock and vibration performance. With the industrial-grade compass RM3100, the flight stability and anti-interference performance have brought a qualitative improvement Difference between X7+ Pro and X7+? X7+ Pro replaces the ICM-20689 chip on the X7+ with a high-end ADI16470 chip. Because of its excellent gyro and acceleration drift performance, it has been used in some cutting-edge aerospace projects in the past. This time, we introduced it into the open source flight control, which is integrated into the IMU with triple redundancy and exerts excellent performance For the regular version, please check CUAV X7+ Flight Controller ADIS16470 sensor! X7+ Pro and X7+ are only different from sensors: X7+ pro uses ADI16470 chip instead of ICM-20689 And the front logo has more Pro words, other appearance and size are the same as X7+. Dual platform compatible CUAV X7+ Pro Supports the current mainstream PX4 (PX4 is being adapted) and Ardupilot two open source platform firmware to meet the needs of different users. CUAV X7 Pro Flight Controller quality CUAV deeply cooperated with the APM & PX4 team to complete the hardware design and software adaptation of the CUAV X7 series, and was produced and tested by the CUAV smart factory. Each autopilot was used for independent I / O through the CUAV AATS system Connectivity and sensor stability test to ensure the stability and reliability of the autopilot. Other characteristics Internal shock absorption Modular design, can be DIY carrier board Support USB_HS, download logs faster Support more dshot output Support IMU heating, make the sensor work better Dedicated uavcan battery port 3 sets of IMU sensors High-precision industrial sensor(ADIS16470+RM3100) |
€889.00
Inc. VATReceiver KAVAN R8 VARIO 2.4GHz Dual Freq 24ch S.bus #KAV18.10008V
Advanced 8-channel 2.4GHz simultaneous dual-frequency Twin 2.4GHz telemetry receiver. It has 8 high-precision PWM channels and 16 or 24-channel modes via S.BUS. Two detachable antennas with IPEX4 connector provide full signal strength over a range of up to tens of kilometers. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the Twin 2.4GHz protocol, both receivers work fully simultaneously in this setup. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable. It features advanced interference suppression for reliable, stable signal transmission across the entire range. Smart transmission system matching speeds up pairing. The black box function stores essential flight data. Receiver operating statuses are indicated by an LED indicator. Smart pairing allows firmware updates wireless. It is equipped with a variometer that provides more accurate and faster measurement and transmission of altitude and vertical speed data. It also allows quick audio feedback from the variometer to the Twin 2.4GHz transmitters. Features:
Technical specifications:
|
€59.90
Inc. VATReceiver KAVAN R8 2.4GHz Dual Freq 24ch S.bus #KAV18.10008
Advanced 8-channel 2.4GHz simultaneous dual-frequency Twin 2.4GHz telemetry receiver. It has 8 high-precision PWM channels and 16 or 24-channel modes via S.BUS. Two detachable antennas with IPEX4 connector provide full signal strength over a range of up to tens of kilometers. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the Twin 2.4GHz protocol, both receivers work fully simultaneously in this setup. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable. It features advanced interference suppression for reliable, stable signal transmission across the entire range. Smart transmission system matching speeds up pairing. The black box function stores essential flight data. Receiver operating statuses are indicated by an LED indicator. Smart pairing allows firmware updates wireless. Features:
Technical specifications:
|
€54.90
Inc. VATFeatured Products
TBS Crossfire Micro TX V2 STARTER Set Long range,Low Latency
The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diversity, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long range control link The Crossfire Micro TX borrows the core technology from its larger brother, but is a JR-module transmitter simplified to the most sought-after features, at a killer price! For people looking to do extreme long range flights beyond 15-20km, the Crossfire TX is still the way to go. For anyone looking to penetrate buildings, fly mini quads or just explore your surroundings a few kilometers away, the Micro TX is the perfect companion. It will still go out up to 40km, just like its bigger brother. But it costs less than half the price. Features:
Package includes
|
€199.99
Inc. VATUAVsystems Fireproof LiPo carry and storage Safe Bag for 12s-14s 340mm long
The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe. Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged. Instructions to use: Ensure that charger rate is properly set and polarity is correct
Please check the Video showing the use of Lipo Safe |
€14.99
Inc. VATRCPROPLUS REB 6808 Pro D6 P8 TWIN SQUARE SUPRA-X REB6808 PRO D6 6mm Bullet Connector 8 Pairs
This is a pack of 8 RCPROPLUS SUPRA-X REB6808 PRO D6 6mm Bullet Connector Set including 8 PAIRS.
Cover material:IDEMITSU plastic |
€35.90
Inc. VATFPV x230 Racer With Gimbal ,1080P Wide Angle HD Camera RC Quadcopter RTF
FPV x230 Racer With Gimble,1080P Wide Angle HD Camera RC Quadcopter RTF
Remote control:
Package Included:
|
€359.00
Inc. VATZD-937/B/ESD Digital regulated Soldering Station, pre-selection buttons
Soldering Station ZD-937, black, 150°C - 450°C, 48W,ESD-protection, with pre-selection buttons 100, 200, 300°C. The station is ideal for home elektronics, school, workshop, service, production and lab. Among the easy and quick temperature adjustment with the up-/down-buttons in 1°C- and 10°C-steps, it is possible to pre-select 100°C, 200°C and 300°C with the related button.
Technical Specification:
Delivery:
|
€59.90
Inc. VAT10 Piece Combination Spanner Set 4-11mm
This "economy" spanner set includes just about all the sizes you will ever need on a model heli. |
€24.00
Inc. VATCustom assembled TITAN DC5 HD v1.4 Compatible with DJI Air Unit PNP
TITAN DC5 w/ DJI Air Unit BNF built for the amazing new DJI FPV system, this quad makes flying FPV truly breathtaking. With the 720p video shown at 120fps through the goggles, DJI has set the bar at a new high for clarity and image quality in an FPV system. This TITAN DC5 BNF is 5 inch quad which is no prop in view, equipped SucceX-D F7(50A 4-in-1 ESC) Stack and popular XING motor, everything you just need to bind and fly! You can use Any radio you want, you will need to add your receiver and bind and calibrate it. If you use your own DJI Remote Controller, you need to update beta-flight to 10.6.0 to set up and bind your DJI remote controller. ELECTRONICS // SucceX-D F7 Stack (50A 4-in-1 ESC):
BNF // Parts lists
|
€330.00
Inc. VATSky hero Anakin Club FPV racer 215-5’’ ARF combo w.radio
Sky hero Anakin Club FPV racer 215mm -5"’’ ARF combo, Our combo delivered with Best components we beleive are on the market today. We beleive that quality assembly can be done by customer, there are a lot of advantages to do so.
Not included:
Sky hero did it again, with the latest drone technology, you have the possibility to fly the freedom of birds. General specs of Club racer versions.
ESSENTIALS
KEY FACTORS
|
€359.00
€229.00
36% Off Inc. VAT
10K+ Products In Stock
Competitive Prices
Same Day Dispatch