eRCmarket

eRCmarket

eRCMarket is a company located in belgium, selling over 9000 products, serving community of modelers worldwide.

we proud of our service, quality of products, competitive prices

www.ercmarket.com

Products


  • DYX-0050 Titan Pushrod

    DYX-0050 Titan Pushrod

    Collective pitch Push/pull rods . SET OF 2

    SKU: SKU11167
    €8.00
    inc. VAT

     IN STOCK
  • E-Millenium conversion set

    E-Millenium conversion set

    This is the Set including: Mount plate and Pinion needed to use when converting Millennium / Dyna-X to Electric.

    Motor Plate- Made from 7075 Aluminum, Anodized for Full oxide protection ( No real need, but we like our parts prefect ).
    If you use Dyna-X, we will supply Spacers to fit the frames.

    Pinion of choice Diameter 5 / 6 or 8mm / Module 1, Hardened Pinion, made from Stainless steel with special surface coating for perfect and quiet transmittion.

    Included in Set ( Product Options)

    • Motor Mount, made for 25mm screw distance motors
    • Hardware (Screws/Shims)
    • Spacers x 4( to fit Dyna-X) frames
    • Pinion of Choice (M1)
    SKU: RCM19065
    €55.00
    inc. VAT

     IN STOCK
  • E-Millenium conversion set with support

    E-Millenium conversion set with support

    This is the Set including: Mount plate, Pinion, and third bearing support,especially for very long shafts (48mm and longer). This is  all needed to use when converting Millennium/Dyna-X to Electric.

    Motor Plate- Made from 7075 Aluminum, Anodized for Full oxide protection
    If you use Dyna-X, we will supply Spacers to fit the frames.

    Pinion of choice Diameter 5 or 8mm, Hardened Pinion, made from Stainless steel with special surface coating for perfect and quiet transmittion.

    Included in Set (Product Options)

    • Motor Mount- made for 25mm screw distance motors
    • 3RD BEARING (S4605) for 5 or 6mm shaft
    • Hardware: 4 x HEX M3x8mm / 2 x HEX M3x50mm / 2 x M3 Locknut
    • Spacers x 4 (to fit Dyna-X) frames
    • Pinion of Choice
    SKU: RCM1906DOUBLE
    €69.00
    inc. VAT

     IN STOCK
  • E-Z Rod end connector 2.1mm, 4pcs

    E-Z Rod end connector 2.1mm, 4pcs

    PUSHROD EASY EZ-CONNECTOR

    set including 4 complete connectors.

     

    SKU: KRW212
    €5.00
    inc. VAT

     IN STOCK
  • EDF unit Global Hawk

    EDF unit Global Hawk

     Special unit EDF for Global Hawk, assembled, with Brushless motor, and ESC 60amp.


    SKU: SKU47703
    €89.00
    inc. VAT

     LOW STOCK
  • Electric Retracts - Large Mains (Metal)

    Electric Retracts - Large Mains (Metal)

    Electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that are designed to accept 10mm wire legs and is suitable for models with a maximum weight of 20kg.

    These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.

    Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.

    Specifications:

    • Leg Wire: 10mm
    • Max Weight: 20Kg
    • MountPlate: 43 x 51
    • Stall Current: 2.1 to 3A
    • Weight: 186g
    • Voltage: 4.8 - 7.4v
    • Dimensions: 92 x51 x 31
    • Gear Type: Metal
    • Torque: 15.50 kg/cm-4.8v
    • Torque: 20.60 kg/cm-7.4v
    • Speed: 6.00 secs-4.8v
    • Speed: 4.00 secs-7.4v
    • Type: Digital
    SKU: ER050M
    €139.90
    inc. VAT

     LOW STOCK
  • Electric Retracts - Large Mains (Stub)

    Electric Retracts - Large Mains (Stub)

    This electric retract range is designed to keep retract installations simple and reliable with great value for money. The electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that have pre-installed 5mm diameter studs for use with oleo legs and is suitable for models with a maximum weight of 10kg.

    These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.

    Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.

    Specifications:

    Leg Wire: 5mm
    Max Weight: 10Kg
    MountPlate: 44 x 51
    Stall Current: 2.1 to 3A
    Weight: 92g
    Voltage: 4.8 - 7.4v
    Dimensions: 92 x51 x 31
    Gear Type: metal
    Torque: 15.50 kg/cm-4.8v
    Torque: 20.60 kg/cm-7.4v
    Speed: 6.00 secs-4.8v
    Speed: 4.00 secs-7.0v
    Type: digital

    SKU: ER040MS
    €89.90
    inc. VAT

     LOW STOCK
  • Electronic scales DS-1000

    Electronic scales DS-1000

    New electronic scales, wider selection of capacities & resolutions, have been included in a low-profile rugged housing . Those scales are Small size, and great for Hobby purposes.

    Specifications
    Counting Mode: 2000 gr
    Precision: 0.1gr

    SKU: RJHA002
    €29.00
    inc. VAT

     IN STOCK
  • Elegoo Multicolored Dupont Jumper Wires (40pcs)

    Elegoo Multicolored Dupont Jumper Wires (40pcs)

    Each Cable Length:

    • about 20 cm /8-inch

    Product Options:

    • Male to Female
    • Male to Male
    • Female to Female
    SKU: EL-CP-0041
    €5.00
    inc. VAT

    
  • EMax BLHeli Series 12A ESC for Multicopters (ONESHOT Available)

    EMax BLHeli Series 12A ESC for Multicopters (ONESHOT Available)

    EMax BLHeli Series 12A ESC for Multicopters (ONESHOT Available) .Based on BLHeli firmware, further optimized to the perfect drive performance. Low-voltage protection, over-heat protection and throttle signal loss protection. Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.

    Parameters of the ESC can be set via program card or transmitter.
    Throttle range can be set to be compatible with different receivers.
    Equipped with built-in linear BEC or switch BEC.
    Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.

    SKU: PM-SK-12A1
    €12.00
    inc. VAT

     IN STOCK
  • EMax SimonK Series Brushless Speed Controller 12A ESC 1-3S Lipo

    EMax SimonK Series Brushless Speed Controller 12A ESC 1-3S Lipo

    Emax 12a ESC SimonK Series Speed Controller Perfect for the 250 and 300 Size Fpv Racers. Superb esc that provides lightning fast throttle response which is ideally suited to the FPV Racing Quadcopters. The perfect ESC for your 250 quad race project.

     

    SKU: PM-SK-12A
    €12.00
    inc. VAT

     IN STOCK
  • Enya # 3 Glow Plug for Nitro Helicopters & Airplanes

    Enya # 3 Glow Plug for Nitro Helicopters & Airplanes

    Enya # 3 Glow Plug for Nitro helicopters: Works excellent with all Helicopter engines, also a general great glow plug for cars, airplanes and boats

    A very popular tried and tested 2 stroke plug. Slightly hotter than standard and great for easy starting. A high quality plug.
     

    SKU: RCGP-001
    €7.00
    inc. VAT

     IN STOCK
  • Eolo /Spirit  Screw Set

    Eolo /Spirit Screw Set

    Set of screws , all you need to have for repairing an Eolo/ Spirit heli. Purchase this set and you save more then 50% of cost. Included in the package

    QTY
    S0030 M3x8 caphead x10
    S4354 M2.5x6 caphead x10
    S0079 M3x5 caphead x10
    S0041 M3x3 grubscrew x 20
    S3370 M2.5x8 caphead x10
    S0116 M2.5x10 caphead x10
    S0029 M2x8 caphead x10
    S0114 M2x12 caphead x 10
    S0039 M3x10 caphead x 10
    S0100 M2.5x4 caphead x10
    S0117 M2x5 caphead x10
    S0080 M2x10 caphead x10
    S4141 M3x6 caphead x10
    S0074 M2x14 caphead x10
    S4300 M2x6 caphead x10

    SKU: SKU11213
    €28.00 €57.00
    inc. VAT

     IN STOCK
  • eRCMarket High Quality Polo T-Shirt

    eRCMarket High Quality Polo T-Shirt

    eRCMarket High Quality Polo T-Shirt.

    Available sizes: M, L and XL

    Color: Black

    SKU: ERCSHIRT1
    €26.00
    inc. VAT

     IN STOCK
  • eRCMarket High Quality Sweater with no Zipper

    eRCMarket High Quality Sweater with no Zipper

    eRCMarket High Quality Sweater with no Zipper

    Available sizes: M, L and XL

    Color: Black

    SKU: ERCSWEATER1
    €35.00
    inc. VAT

     IN STOCK
  • eRCMarket High Quality Sweater with Zipper

    eRCMarket High Quality Sweater with Zipper

    eRCMarket High Quality Sweater with Zipper

    Available sizes: M, L and XL

    Color: Black

    SKU: ERCSWEATER41
    €35.00
    inc. VAT

     LOW STOCK
  • Exhaust Deflector

    Exhaust Deflector

    Silicon Exhaust Deflector, made from High- Temp resistant silicone - 10 mm
    Different colors, please ask for your desired color in order comments.

    SKU: KRW32
    €5.00
    inc. VAT

     IN STOCK
  • Expandable Sleeve- protect your wires

    Expandable Sleeve- protect your wires

    The advantage of this sleeve is the high protection for electronics, silicone wires, etc. This product has excellent resistance to temperature , oils, carbon and sharp corners of frames, which can defect the wires and cause real trouble to the model.

    Always use this as an extra insurance in your model.

    Don't compromise. Proven to save many cases of Model crash/Loss , Good chemical resistance Superior strength and abrasion resistance

    to be used on Servo wires, Battery wires, fuel lines, and just every thing you want to protect.

    Maximum continuous operating temperature from -80°C - 200°C (melting 250C)

    Available Sizes:

    1- For 1 Servo wire ,Choose the "2-7"mm  (Blue or Black)
    2- For  2-4 Servo wires, or silicone cables 1.5-6mm, Choose the "3-9"mm (Black)
    3- For 3-6 servo wires, or Multiple Silicone cables 2-6mm, or fuel line, Choose the 5-13mm( Black)

    Available in Black or Blue color( depends on size) .
    Pack of 1m with 10cm Heat shrink for fine ends

    SKU: 3-9BLK
    €4.00
    inc. VAT

     IN STOCK
  • Extension Flat servo wire 1.2mm

    Extension Flat servo wire 1.2mm

    Extension Wire twisted /flat 18AWG, 1.2mm2, used for SBUS extensions, or servo HD, or Quad's ESC & motor.

    RC Extension Wire(Futaba/JR/Hitec) Servo Cable /Lead Switch Harness PVC Wire Silicone Wire
    Connect two servos to a single servo port.

    Specifications:

    1. Conductor Wire: 30X0.20mm
    2. Color: Black Red white
    3. Compatible JR or Futaba

    SKU: MU54061
    €3.00
    inc. VAT

     IN STOCK
  • External Charge external Socket (JR/Sanwa Z)

    External Charge external Socket (JR/Sanwa Z)

    Use a neat External Charge Holder to mount your switch's charge lead in the side of a fuselage so you can charge without removing the wing
    External Charge Socket (JR/Sanwa Z)

    SKU: P-IRVECS1
    €3.90
    inc. VAT

     72HR STOCK
  • Extreme 3D head-set

    Extreme 3D head-set

    Want to make your Robbe heli extreme 3D?This kit will make your head extremely responsive,

    SKU: SKU14243
    €17.00
    inc. VAT

     IN STOCK
  • FF-10C / T7C  TX Switch Nuts-Green

    FF-10C / T7C TX Switch Nuts-Green

    Futtaba 10c(FF10) , 7C (FF7) Transmitter SWITCH NUTS green color

    Full set including 8 pcs and Removal/installation tool. Fits Futaba 10c(FF10) , 7C (FF7)

    You'll notice that the upper rim of the nut is smooth. Some Transmitters have the slots cut in the nuts had sharp corners. If you using to put the fingers between the switches, this got to be very irritating. Those nuts have smooth rim.

    SKU: ELRC603
    €16.00
    inc. VAT

     LOW STOCK
  • Filter with Mini pump

    Filter with Mini pump

    Special with Mini pump( Primer)

    SKU: HTPA145
    €6.00
    inc. VAT

     IN STOCK
  • Fireproof LiPo carry and storage Safe Bag

    Fireproof LiPo carry and storage Safe Bag

    The LiPo Safe sack/bag is a hi-tech bag made of space-age materials that has the ability to contain a lithium polymer battery fire or charging mishap. Place your lithium polymer battery inside the LiPo Safe and extend the charging wires through the top flap. Charge the lipo batteries when they’re in the LiPo Safe for peace of mind and greater safety. In the case of a lithium polymer battery charging mishap, the LiPo Safe’s fire-resistant material mitigates the ferocity of the LiPoly blaze inside and vents the smoke outside the LiPo Safe.

    Size 23cm x 30cm - fits for 2 packs 6s 5000, however we recommend to use each pack with each bag.

    The LiPo Safe is sealed with a thick, industrial strength, Velcro flap. The current LiPo Safe is designed to handle a lithium polymer battery mishap

    Before using the LiPo Safe you must read and understand the LiPo Safe Safety Instructions. We assume absolutely no liability for any damages of any kind - even with proper use. When using the LiPo Safe, you must always remember to abide by safe lithium polymer battery charging and safety rules and never leave charging li-polymer batteries unattended. Never leave damaged lipos unattended. Always use the LiPo Safe on a non-flammable surface and in a ventilated area. Avoid damage to the LiPo Safe and not use the LiPo Safe if it is damaged.

    Instructions to use:

    Ensure that charger rate is properly set and polarity is correct

    1. Attach charging leads to battery
    2. Place battery in LiPo Safe towards the bottom
    3. Place LiPo Safe on non-flammable surface
    4. Route charge leads through vent at the top seam of the LiPo Safe
    5. Close top flap of LiPo Safe and press hook and loop closure fully closed
    6. Charge battery using proper charging practices
    7. Always practice extreme caution when charging and never leave a charging battery unattended

    Please check the Video showing the use of Lipo Safe

    SKU: SKU21065
    €12.00
    inc. VAT

     IN STOCK

Manufacturers