eRCmarket

eRCmarket

eRCMarket is a company located in belgium, selling over 9000 products, serving community of modelers worldwide.

we proud of our service, quality of products, competitive prices

www.ercmarket.com

Products


  • CNC servo Arm-Double

    CNC servo Arm-Double

    CNC servo Arms, avaliable for Hitec, JR, Futaba.Pack including 1 arm ( choose Arm options)

    SKU: KRS272
    €3.50
    inc. VAT

     IN STOCK
  • CNC tail Metal Gearbox for Robbe

    CNC tail Metal Gearbox for Robbe

    CNC tail Metal Gearbox for Robbe, fits Millenium, Futura ( 24mm) , Cuatro.

    Anodized in Natural color. Fits 24mm booms, with special CNC made smoother gear.
    Ratio- 1:1 , This gearbox is Lighter then stock plastic gearbox .Beautiful and strong 1 piece design. Set complete with Ball bearings, Hardware, and pinions . Can be mounted Left or Right side.
    Double Tail scissor arm set included with the gearbox ( 64 eur value )Note:Tail Output Shaft and Plastic Tail Bridge S1038 are not included in the kit!

    This gearbox and all parts of it are produced in Europe.From now this is the most affordable and best gearbox
     

    SKU: RCRO-016
    €169.00 €219.00
    inc. VAT

     IN STOCK
  • Composite Canopy 130x style LOGO

    Composite Canopy 130x style LOGO

    Fusuno offers a very affordable price, beautiful and high quality canopies at very attractive price. This is the completely new shape canopy which is constructed of high quality new Composite. This canopy is specifically designed to fit well on the 130x

    SKU: FUC-130LG01
    €21.00
    inc. VAT

     LOW STOCK
  • Connector set Hubsan

    Connector set Hubsan

    Connector set Hubsan

    SKU: H101-04
    €7.00
    inc. VAT

     LOW STOCK
  • Crius All In One PRO Flight Controller V2.0

    Crius All In One PRO Flight Controller V2.0

     Crius All In One PRO Flight Controller V2.0 Support MegaPirateNG and MultiWii

    Features:

    • Supported MegaPirateNG and MultiWii firmware
    • Up to 8-axis motor output
    • 8 input channels for standard receiver
    • 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry
    • 2 servos output for PITCH and ROLL gimbal system
    • A servos output to trigger a camera button
    • 6 Analog output for extend device
    • A I2C port for extend sensor or device
    • Separate 3.3V and 5V LDO voltage regulator
    • ATMega 2560 Microcontroller
    • MPU6050 6 axis gyro/accel with Motion Processing Unit
    • HMC5883L 3-axis digital magnetometer
    • MS5611-01BA01 highprecision altimeter
    • FT232RQ USB-UART chip and Micro USB receptacle
    • On board logic level converter
    • Match the standard of RoHS

    Flight mode for Multiwii

    • One of the following basic mode
    • Acro
    • Level
    • Alt Hold
    • Head Lock
    • Optional mode
    • HeadFree (CareFree)
    • GPS Hold (Need GPS receiver or Extend Board)
    • GPS Back to home position (Need GPS receiver or Extend Board)

    General

    • Dimension: 50mmX50mm
    • Height: 11.6mm
    • Weight: 14.2g
    • Fixing hole spacing: 45mm
    • Hole diameter: 3mm
    SKU: AIO-V2.0
    €95.00
    inc. VAT

  • Cross wrench

    Cross wrench

    Cross wrench - with 4 glow plug holders , Long type for easy access in Helicopters and Cars.

    This wrench will fit from Glow plug removal to Motor nut replacement.
    Wrench sizes are : 5.5 - 7 - 8 - 10 mm

    SKU: RDVS0019
    €5.00 €8.00
    inc. VAT

     IN STOCK
  • Curved Micro Helmostat

    Curved Micro Helmostat

    Curved Micro Helmostat

    These items have many uses in a lab, a shop or at home, holding or clamping small or hot items, or reaching into tight places. They can be used for assembly and manufacturing or repair work of many kinds.

    Made of stainless steel with semi-polished finish, all feature box joint, serrated jaws and rachet lock to ensure a secure hold.

    SKU: SQU10502
    €4.00
    inc. VAT

     IN STOCK
  • Custom FPV Air Race flag

    Custom FPV Air Race flag

    In the mood for race with obstacles? ERCmarket presents its custom designed FPV Air Race flags, to make your race even more exciting!

    Specifications:

    • Size:
      • Flagpole: 280 cm
      • Flag: 250(h) x 50(w) cm
    • Material: digital flag fabric, aluminium flagpole, with ground spike mount

    Includes:

    • 1x Flag
    • Ground Mount
    • Transportation bag
    • Instructions for set-up
    SKU: ERCFLAG
    €39.90
    inc. VAT

     LOW STOCK
  • Custom FPV Air Ring Race Gate

    Custom FPV Air Ring Race Gate

    In the mood for race with obstacles? ERCmarket presents its custom designed FPV Air Ring Race Gates, to make your race even more exciting!

    Specifications:

    • Size: 200(outer) x 150(inner) x 304(h) cm
    • Material: digital flag fabric aluminium flagpole

    Includes:

    • 1x Flag
    • 2x Ground mount
    • 1x Securing rope
    • 4x Nail
    • Transportation bag
    • Instructions for set-up
    SKU: ERCRGATE
    €65.00
    inc. VAT

  • Custom FPV Archer Air Race Gate

    Custom FPV Archer Air Race Gate

    In the mood for race with obstacles? ERCmarket presents its custom designed FPV Archer Air Race Gates, to make your race even more exciting!

    Specifications:

    • Size: 200(w) x 120(h) cm
    • Material: digital flag fabric aluminium flagpole

    Includes:

    • 1x Flag
    • 2x Ground Mount
    • Transportation bag
    • Instructions for set-up
    SKU: ERCHGATE
    €39.90
    inc. VAT

  • Cyclic ring

    Cyclic ring

    Cyclic ring fits Futaba and Jr radio, those rings prevent interactions caused by Non linear sticks.

    SKU: SKU8123
    €9.00
    inc. VAT

     LOW STOCK
  • Damping Mount Kit

    Damping Mount Kit

    Damping Mount Kit for DJI Phantom 76061004

    Item Description:

    DJI PHANTOM is an incredible product for aerial photography, customers can use GoPro to shoot many beautiful pictures; just some customers found the picture sometimes has jello effect due to vibration issue of PHANTOM. Users could solve this problem through reducing GoPro resolution; however, each PHANTOM has different situation, some vibration could be too serious to be solved even reducing the resolution. There are dampers added between GoPro and PHANTOM to absorb vibration, the dampers included in the package is the softest one We also provide different hardness dampers, that you can purchase dependant upon your demands. Also, the adapter has been lengthened so customers can install an AV transmitter separately for FPV flight and real-time monitoring.

    SKU: 76061004
    €29.90
    inc. VAT

     72HR STOCK
  • Die 2.0mm

    Die 2.0mm

    Die for 2.0 mm DIN 223B, HSS

    SKU: MU19320
    €8.00
    inc. VAT

     IN STOCK
  • Die 2.5mm

    Die 2.5mm

    Die for 2.5mm DIN 223B, HSS

    SKU: MU19325
    €8.00
    inc. VAT

     IN STOCK
  • Digital Anemometer with wind temperature measurement instrument

    Digital Anemometer with wind temperature measurement instrument

    Digital Anemometer with wind temperature measurement instrument

    Air speed mesurement with a fan sensor

    • Digital display: LCD, 30x26mm, with behind reason lighting (approx. 15s)
    • Measuring ranges: 0-30m / s, 0-90km / h,-10-45°C
    • Dissolution: 0.1 ms / s, 0.3 kms / h 0.2°C
    • Unities: m/s, ft/min, knots, km/h, mph, °C or °F
    • Exactness: wind: ±5%, temperature: ±2°C
    • Automatic turning off after approx. 15 minutes
    • Minimum / maximum air speed measurement
    • Average measurement of the air speed
    • Undervoltage alarm

    Technical data

    • Product: HP-866B
    • Electricity supply: 2x1,5V AAA
    • Power consumption: approx. 3 mA, switched off 5 µ A
    • Working data:-10-40°C, relative air dampness =90%rH
    SKU: HP-866B
    €19.90
    inc. VAT

     LOW STOCK
  • Digital Caliper

    Digital Caliper

    Japan made Stainless steel caliper. Precision without compromise.

    Features:

    * Manual power on/off
    * Metric/Inch conversion.
    * Zero setting at any position
    * SPC output.
    * Easy measurement of narrow grooves.

    Size: 6"/ 150mm, Precision 0.01mm

    SKU: 100-9006
    €29.00 €35.00
    inc. VAT

     IN STOCK
  • Digital Infrared Thermometer 12:1 adjustable Emissivity

    Digital Infrared Thermometer 12:1 adjustable Emissivity

    Digital infrared thermometer -30 - +550°C with laser and display back light for non-contact measurement.

    Features:

    • Display: LCD with back-light
    • Data-Hold-Function
    • Auto power off
    • Units: °C and °F
    • Laser pointer
    • Adjustable Emissivity

    Technical Specifications:

    • Range: -30-550°C Resolution: 0,1°C
    • Accuracy: ±2% or 2°C between 0 and 100°C, ±3% or 3°C upper and lower
    • Repeatability: ±1°C
    • Distance ratio: 12:1
    • Emissivity adjustment: 0,1-1
    • Power supply: 9V-Battery

    Includes:

    • Infrared-Thermometer
    • German and English manual
    SKU: HP-880E
    €26.99
    inc. VAT

  • DJI Phantom 3 and Inspire 1 Black Transmiter tray

    DJI Phantom 3 and Inspire 1 Black Transmiter tray

    This transmitter tray is suitable with the DJI Phantom 3 Series and the DJI Inspire 1 transmitter, all ports are accessible. (Transmitter not included)

    • Very stable and modern design.
    • The console is made of high quality, 2mm thick fiberglass plastic with sturdy stainless steel suspension brackets allowing the pilot to fly perfectly
    • The transmitter tray is suitable for transport in any standard aluminum suitcase.
    • Material: Fiber Glass Plastic black
    • Dimensions: 290 x 165 x 150 mm
    • Weight: approx 290 g
    • FPV extension is NOT included
    SKU: SPDJIIB-P3B
    €68.90
    inc. VAT

     72HR STOCK
  • Dobble Banan set

    Dobble Banan set

    Set of Double Banan connector, easy to use

    SKU: MU71660
    €3.00
    inc. VAT

     IN STOCK
  • Driven belt 460XL

    Driven belt 460XL

    Driven belt 460 XL, LOGO 400

    SKU: MIK-4464
    €8.90
    inc. VAT

     72HR STOCK
  • DroFly MultiWii Flight Control Board with MPU6050

    DroFly MultiWii Flight Control Board with MPU6050

    DroFly MultiWii Flight Control Board with MPU6050 + MS5611 + HMC5883 + Atmega32U4

    MultiWii is an open source program's original author is a French program Alex, after severals years of joint efforts of many enthusiasts, and now this board has become increasingly mature, has become very popular abroad, cost-effective flight control one.
    That multi-axis aircraft MWC fans can easily access the high cost of this product, through the MWC program to control the hardware platform, can achieve a variety of multi-spindle, high-quality flight results, flexibility can be adjusted into a very stable or very flexible to fit aerial, FPV or stunt flying and many different needs.

    Compared to KK or ACM, MWC's more stable flight performance, flight skills required for novice lower debugging process more intuitive.
    Dedicated MultiWii GUI program can easily observe the PID parameters, flight control signal input / output status, sensor / switch-state, as well as aircraft attitude and heading sensor signal state of each group, sufficient for the initial configuration of the aircraft easier.

    Features:

    • Atmega32u4 microcontroller IMU 10DOF - MPU6050 + MS5611 + HMC5883
    • USB connector (no FTDI needed)
    • Serial port (for Spektrum satellite receiver, GPS, bluetooth module...)
    • 3.3v and 5v regulators On board logic level converter
    • Alarm output / control battery voltage to drive a buzzer or LED
    • Possible connections: PPM serializer, I2C sensors, analogic sensors...
    • 3 servo outputs for camera stabilisation
    • 8 outputs for motors 6 receiver inputs
    • Dimensions 50 mm x 50 mm
    • Standard MK style mounting holes 45 mm x 45 mm
    • Bootloader and firmware of Atmega32u4 already flashed with the last version MultiWii code
    SKU: DWMWIIFC
    €79.00
    inc. VAT

  • Drone Theory Info-session

    Drone Theory Info-session

    IF YOU think it’s expensive to hire a professional, wait until you hire an AMATEUR

    Sounds familiar?

    Considering doing photos with Drone? Need to be informed about the rules? What machine is the right one for me? Can I fly it?  How to assemble?

    If one of those questions passed throw your mind, we can help.

    35 years of experience with RC, Engineering background, MBA knowledge- is all we need to make the right choice with you. Combining your needs with our experience, and you get the right product.

    Together with this we offer a session of introduction to Drones, basic Theory info, which will be given as Information Session of 2-3 Hours.

    *Session cost can be refunded,  Contact for more info
     Sessions will be scheduled on demand.

    SKU: DRONEINFO
    €150.00

     72HR STOCK
  • Drones & Multicopters 24 LED Bright Blue Light Spotlight For Night Flying

    Drones & Multicopters 24 LED Bright Blue Light Spotlight For Night Flying

    This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

    Very low Draw of current, Strong light

    • Light Color: Blue
    • 30mm diameter- easy placed, and also can be put in certain motor mounts.
    • Light visible till 300 Meters
    • Power supply: 11-12v, Balancer 3s connector.
    • Weight: < 5 gr
    SKU: SLLBLUE
    €7.00
    inc. VAT

     IN STOCK
  • Drones & Multicopters 24 LED Bright White Light Spotlight For Night Flying

    Drones & Multicopters 24 LED Bright White Light Spotlight For Night Flying

    This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

    Very low Draw of current, Strong light
     

    • Light Color: Cool White
    • 30mm diameter- easy placed, and also can be put in certain motor mounts.
    • Light visible till 300 Meters
    • Power supply: 11-12v, Balancer 3s connector.
    • Weight: < 5 gr
    SKU: SLLB
    €7.00
    inc. VAT

     IN STOCK

Manufacturers