eRCmarket

eRCmarket

eRCMarket is a company located in belgium, selling over 9000 products, serving community of modelers worldwide.

we proud of our service, quality of products, competitive prices

www.ercmarket.com

Products


  • Carbon tube 4x2mm 1000mm

    Carbon tube 4x2mm 1000mm

    Carbon tube, OD 4 mm xID 2mm .Very light and strong.
     Extremely Straight ( made by Arrow Technology) .
    Can be used as a Boom, Support, and more.

    Length: 1000cm

    SKU: RCMC-035
    €5.00 €8.00
    inc. VAT

     IN STOCK
  • Carbon Tube 5.5x3mm 1000mm

    Carbon Tube 5.5x3mm 1000mm

    Carbon tube, OD 5.5mm xID 3mm .Very light and strong. Extremely Straight ( made by Arrow Technology) .can be used as a Boom, Support, and more.

    Length: 1000cm

    SKU: RCMC-038
    €6.00
    inc. VAT

     IN STOCK
  • Carbon Tube 5x3mm 1000mm

    Carbon Tube 5x3mm 1000mm

    Carbon tube, OD 5mm xID 3mm .Very light and strong. Extremely Straight ( made by Arrow Technology) .can be used as a Boom, Support, and more.

    LENGTH 1000mm

    SKU: RCMC-032
    €6.00
    inc. VAT

     IN STOCK
  • Carbon Tube 6x3mm (1000mm)

    Carbon Tube 6x3mm (1000mm)

    Carbon Tube 6x3mm (1000mm) .

    Very light and strong.
    Can be used as a Boom, Support, and more.

    Lenght: 1000mm

    SKU: RCMC-033.1
    €7.00
    inc. VAT

     IN STOCK
  • Carbon Tube 7x5mm

    Carbon Tube 7x5mm

    Carbon tube, OD 7mm xID 5mm .Very light and strong. Extremely Straight ( made by Arrow Technology) .can be used as a Boom, Support, and more.

    Length: 100cm

    SKU: RCMC-039
    €9.00
    inc. VAT

     IN STOCK
  • Carbon Tube 8x6mm

    Carbon Tube 8x6mm

    Carbon tube, OD 8mm xID 6mm .Very light and strong.
    Extremely Straight ( made by Arrow Technology)
    Can be used as a Boom, Support, and more

    Lenght: 80cm
    SKU: RCMC-034
    €9.00 €13.00
    inc. VAT

  • Case XL for GoPro

    Case XL for GoPro

    GOPRO EDITION
    BASIC LARGE

    SP United is happy and proud to announce a new addition to the SP POV Case family. First off, lets just put it this way: It’s a big one!!!

    Whilst exhibiting the same protection and features of his smaller brother, the new and enlarged POV Case, of the 'Go Pro Edition' series additionally provides space for the Suction Cup Mount as well as small tripods and telescope bars.

    Truly, the best and top notch accommodation for your entire action cam equipment!! [ 32 x 22 cm ]

    Please note this is for the case only the camera and accessories are NOT included
    SKU: DWX5201XL
    €65.00
    inc. VAT

     72HR STOCK
  • CC3D Atom Mini FPV Flight Controller (Bent pins)

    CC3D Atom Mini FPV Flight Controller (Bent pins)

    This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality.
    Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size!

    Description:

    • Item name:  CC3D Atom/Mini CC3D/CC3D EVO
    • Size (board only): 30mm x 17mm
    • Size (in case): 22 x 38 x 12mm WxLxH
       

    Features:

    • The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.
    • Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM.
    • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
    • 4 layer PCB for superior electrical noise reduction and flight performance.
    • Software support for Windows, Mac and Linux.
    • Direct high speed USB support with no drivers required.
    • Spektrum satellite receiver support.
    • Futaba S-BUS hardware support.
    • Innovative Flexi-port technology for superior port flexibility.
    • 4Mbits on-board EEPROM for configuration storage.
    • This OpenPilot CC3D Atom board also includes a high quality, protective case.
    • Bent pin layout for easy connectors.

     
    Package included:

    1 x CC3D Atom flight controller
    1 x 8 pin cable
    1 x 4 pin cable
    1 x 3m double-sided sticker
    1 x antenna pedestal
    1 x anti-vibration damper set

    SKU: CC3DMini
    €28.99
    inc. VAT

     IN STOCK
  • CC3D Atom Mini FPV Flight Controller (Straight pins)

    CC3D Atom Mini FPV Flight Controller (Straight pins)

    This CC3D Atom is about half the size of the regular OpenPilot CC3D, but with the same functionality.
    Now you can get all the great features and functionality of the full sized CC3D flight controller board but at about 1/2 the size!

    Description:

    • Item name:  CC3D Atom/Mini CC3D/CC3D EVO
    • Size (board only): 30mm x 17mm
    • Size (in case): 22 x 38 x 12mm WxLxH
       

    Features:

    • The CC3D provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes.
    • Powerful STM32 32-bit micro-controller running at 90MIPs with 128KB Flash and 20KB RAM.
    • 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
    • 4 layer PCB for superior electrical noise reduction and flight performance.
    • Software support for Windows, Mac and Linux.
    • Direct high speed USB support with no drivers required.
    • Spektrum satellite receiver support.
    • Futaba S-BUS hardware support.
    • Innovative Flexi-port technology for superior port flexibility.
    • 4Mbits on-board EEPROM for configuration storage.
    • This OpenPilot CC3D Atom board also includes a high quality, protective case.
    • Bent pin layout for easy connectors.

     
    Package included:

    1 x CC3D Atom flight controller
    1 x 8 pin cable
    1 x 4 pin cable
    1 x 3m double-sided sticker
    1 x antenna pedestal
    1 x anti-vibration damper set

    SKU: CC3DMiniS
    €28.99
    inc. VAT

     IN STOCK
  • CC3D cable set

    CC3D cable set

    8 Pin spare cable for CC3D openpilot flight controller

    SKU: CableCC3D
    €2.50
    inc. VAT

     IN STOCK
  • Cellpro adaptor to EH 5/8S

    Cellpro adaptor to EH 5/8S

    Adaptor to fit Cellpro chargers to transfer to EH . this is an easy way to adapt to your current balancer adaptor.

    Option of cable 5S( CELLPRO 10X) and 8S for Powerlab chargers.

    SKU: CELLPROEH1
    €5.00
    inc. VAT

     IN STOCK
  • Ceramic Ball bearing 10x22x6

    Ceramic Ball bearing 10x22x6

    Ceramic Ball bearing 10x22x6mm ABEC -5

    SKU: SKU8141
    €11.00
    inc. VAT

     IN STOCK
  • CF Ferrar Blades

    CF Ferrar Blades

    Walt Ferrar Carbon Fiber Tail Blades are made for FP and CP Micro helicopters to improve tail controls and tail performance.Weight: 0.41 gramsUsage: Micro HelisFeatures: Length: 43mm or 48mmRoot Thickness: 2mm Mounting Hole: 2.00mm
    SKU: SKU6412
    €9.90 €18.00
    inc. VAT

    
    SALE
  • Charger Adaptor1S EFLIGHT

    Charger Adaptor1S EFLIGHT

    1S High Current Ultra-Micro Battery Adapter Lead for Eflight lipo, such as MCPX, comes with bare wires 10cm, to be added to any multi or charging cable.

    SKU: PHP1S
    €1.50
    inc. VAT

     IN STOCK
  • Charging Cable BEC

    Charging Cable BEC

    Made from High quality 2.5mm wire, Factory installed.

    Silver plated banana jacks, excellent item to upgrade your current charging cable.

    SKU: KRJ111J
    €7.00
    inc. VAT

     LOW STOCK
  • Charging Cable Futaba

    Charging Cable Futaba

    Charging cable with TX connector to fit Futaba radios
    Length 50cm. Provided Quality.
    This cable is produced and tested with most modern procedures. Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.
    Those cables provided with 3 years Guarantee.

    SKU: SKU11219
    €7.00
    inc. VAT

  • CLEAR double sided sticky acrylic gel adhesive tape 2mm thick, 15mm wide

    CLEAR double sided sticky acrylic gel adhesive tape 2mm thick, 15mm wide

    POWERZIP strip, 15mm wide, 1meter long, 2mm thick

    Power tape, holding power is up to 50 kg!!, Double face transparent silicone tape ( red cover), excellent for installation of wires, wood, fiber, Gyro , Receiver and more..

    Its suitable for internal & external use it offers high adhesion to a wide variety of surfaces. It has superior 'wetting out' properties which increase the bonded surface area increasing the strength of the bond. It has excellent ageing properties and is resistant to U.V. light, abrasion, corrosion & moisture.
    Service temperature is -30°c - +80°c (continuous)/ +130°c (shorterm).

    There is a red easy-peel liner one one side of the tape. Once the liner is removed, the tape is completely clear & ideal for glass/perspex where an invisible fixing/fastening is required.

    Also, ideal for fastening things to any surface, Anti vibration.

     

    SKU: 4910HV
    €5.00
    inc. VAT

     IN STOCK
  • Clear Lens Safety Glasses - Protect From Dust, Impact, Splashes

    Clear Lens Safety Glasses - Protect From Dust, Impact, Splashes

    Clear Lens Safety Glasses  (1 pair) with silicone comforts

    Protect From:

    • Blunt impact
    • Radiation
    • Splashes and droplets
    • Dust
    • Small dust particles
    SKU: SAFGLASS
    €6.00
    inc. VAT

     IN STOCK
  • Clink Weight set

    Clink Weight set

    Clink Weight set(2)

    SKU: HTPA146
    €5.00
    inc. VAT

     IN STOCK
  • Clover Leaf Antenna 5.8GHz TX-RX

    Clover Leaf Antenna 5.8GHz TX-RX

    Circular Polarization is one of the biggest step forward in the progression of the FPV experience of the last few years. It has improved signal reception on all bands and brought 5.8Ghz video from one of the least practical systems to now one of the best.

    This is a 5.8Ghz Cloverleaf antenna for your transmitter and receiver.  A plastic enclosure is included to stop the antenna from being bent or damaged.  The connection on this antenna is a SMA type connector.

    A cloverleaf antenna has 3 distinct lobes on it.  Is is usually used to connect to your transmitter unit that is onboard your multicopter or aircraft.  This is an omni-directional antenna so you might have some signal loss when you are flying directly above the receiver as this antenna does not rediate directly below or above the antenna axis.  However overall the cloverleaf antenna is the best type to use for your transmitter.
    Cloverleaf Antenna Specifications

    Set of TX and RX antennas Included!

    •   Gain: 5dBi
    •   Antenna connector: SMA Plug
    •   Standing wave ratio(SWR): <1.5
    •   Length: 8cm
    •   Weight: 12.5g
    SKU: FPVCA02
    €18.00 €29.00
    inc. VAT

     IN STOCK
  • Clutch Liner Material - 180x12mm (4pcs)

    Clutch Liner Material - 180x12mm (4pcs)

    Made from Aftermarket High Density material , fits All clutch systems in thickness of 1 or 1.5mm
    4 pieces of 180x12mm

    Why do i need aftermarket material?

    The material used in today systems as Align, and others is very thin, around 0.8-1mm.

    After seen a lot of clutches broken in the air, we came with aftermarket material.
    The main reason for those breaking clutches is the distance between the clutch and the material.
    Example, the diameter of clutch( metal ) is 53mm, and the liner installed is 54. 1mm is free space allow the clutch to expand.
    Every technical person knows that the material which clutch made from is spring metal which expand  with turning, but it is very limited, and can expand to 0.3-0.5mm  if more space exist, the clutch risk to break.

    So if you need to change the liner, use thicker material and do the following:

    Measure the clutch and the clutch bell, lets assume the clutch is 53mm, and the bell is 56.
    If you put 1mm, it will be 54mm, so 1mm too much space- risk to break.
    If you use 1.5mm, its better, however the clutch will be tight to insert,
    In this case prepare the liner, and put manually into the clutch bell, if the clutch doesn’t go inside, please take it out and with the help of sandpaper 80-120, sand little for all the length and do the fit again.
    You need to come to the point when the clutch will enter with a little force, and will show like it turns not easy.. but still turns. At this stage, glue all and make the fit test, if needed, sand the material inside the bell .

    The result- after you start the heli first time, the clutch will show difficulty to turn, but after 2-3 flight it will “find it way” and it will have perfect fit. And it will last for very long time.

    SKU: SKU4053
    €10.00 €15.00
    inc. VAT

     IN STOCK
  • CNC Aluminum Main Blade Grip

    CNC Aluminum Main Blade Grip

    The Precision CNC Aluminum Main Blade Grip set is designed to improve stability, durability and performance on the helicopter. It's directly replaced the stock plastic main grip. The Precision CNC Aluminum Main Blade Grip set is machined with high tolerance from aircraft aluminum to achieve the best possible precision and using triple non-shield type ball bearing for the Aluminum Main Blade Grips to avoid stripping and to perform efficiently under high RPM and 3D maneuver condition On mcpx flybarless head system. And yet, the Aluminum Main Blade Grip design allows pilot to set damping from soft to hard to fit your best flying style. Threaded steel ball join is also used to prevent wear and tear for long time use. More than that, the Precision CNC Aluminum Main Blade Grip set is very light weight 0.12gram lighter than stock plastic grip while equipped with triple ball bearing and threaded steel ball join. The Aluminum Main Blade Grip design will bring the best performance and the best look to your helicopter.

    Includes
    •    2 x Precision CNC Aluminum Main Blade Grip
    •    6 x Non-Shield Ball Bearing
    •    2 x Damper Spacer (Soft)
    •    2 x Damper Spacer (Hard)
    •    2 x Threaded Steel Ball Join
    •    Hardware
    SKU: MCPX001-S
    €25.00
    inc. VAT

     LOW STOCK
  • CNC fan 90mm

    CNC fan 90mm

    90 mm Metal Fan for Robbe 60-90 size helis, Pre-balanced with Special profile fins for increased cooling, direct replacement for standard 90 mm fan-shroud,pre-drilled for governor magnets

    SKU: RCUG-022
    €38.00 €58.00
    inc. VAT

     IN STOCK
  • CNC Header tank Bracket

    CNC Header tank Bracket

     CNC Header tank Bracket, fit most header tanks

    SKU: HT-PV1008
    €6.00
    inc. VAT

     IN STOCK

Manufacturers