eRCmarket

eRCmarket

eRCMarket is a company located in belgium, selling over 9000 products, serving community of modelers worldwide.

we proud of our service, quality of products, competitive prices

www.ercmarket.com

Products


  • Ripmax Power Supply 13.8v 15A 200W

    Ripmax Power Supply 13.8v 15A 200W

    Ripmax Power Supply 13.8v 15A 200W

    This new dual-output, 13.8v, 200W, power supply is a high quality switch mode unit with a particularly smooth output current, making it suitable for use with almost all DC input chargers available today, even those that are sensitive in voltage.
    Most 12v nominal input chargers, such as those in the Ripmax range, are more than able to cope with the 13.8v DC output.
    The dual 4mm outputs allow easy connection of two units such as chargers, tyre warmers or battery warmers etc, to take advantage of the maximum current of 15 Amps/200W supplied.
    The case is moulded from tough plastic and therefore naturally insulated.

    SKU: O-IP2001
    €44.90
    inc. VAT

  • Ripmax Power Supply 13.8v 30A 415W

    Ripmax Power Supply 13.8v 30A 415W

    Ripmax Power Supply 13.8v 30A 415W

    The flexible, dual-output, 13.8v, 415W power supply is a high quality switch mode power supply with a smooth output current, making it suitable for use with almost all DC input chargers on the market.
    The dual, 4mm outputs also have screw-clamp outputs, allowing flexibility in the way that external units like chargers are connected. With a useful 30A and 415W of power output, this power supply can be used as a stable source of DC output that is suitable for chargers or even testing smaller motors when the ESC is direct connected.
    By having a stable current, it is easier to understand motor performance when varying propellers etc.

    SKU: O-IP2003
    €89.90
    inc. VAT

     72HR STOCK
  • Ripmax Sigma EQ Mini AC/DC Charger (Euro)

    Ripmax Sigma EQ Mini AC/DC Charger (Euro)

    Ripmax Sigma EQ Mini AC/DC Charger (Euro)

    The perfect 'no frills' charger for beginners and club modellers alike. Capable of charging Li-Po, Li-Fe, Nimh, Nicad, and Lead Acid batteries from 0.1 to 4.5A with balancing for the relevant Lithium technology plus Delta peak for Nimh and Nicad. That's a 1-4S Li-Po/Fife, a 1-10S Nimh/Nicad or a 6-12v Lead acid. The internal circuitry is limited to 45W and the current is automatically limited to prevent exceeding this, if the selected current is higher.

    Balancing accuracy is 5mv per cell (Lithium) and delta Peak accuracy 8mv for Nicad and 5mv for Nimh.

    Input power can be DC (11-15v) or AC (100-240v), making the choice of power very flexible, depending on whether you are at home or at the field/track/lake. It is fully protected for current overload and reverse output polarity.

    The outer case is fully metal for durability and a 'quality' look/feel.

    Supplied with a special multi plug balance adaptor board compatible with XH, TP, EH and PQ plugs on the one board. There is no need to buy another board to have full compatibility with all Lithium balance connectors. One main output lead is provided with a male 'T' connector on it already, making the Sigma EQ Mini easy to use with many of the ARTF models now on the market.

    Specifications:

    • Weight:    230g
    • Dimensions:    110 x 93 x 39mm

    Note: There is a mistake in the instructions on this charger, where it says 'High-performance rapid charger/discharger'' it is wrong, there is no battery discharge function.

    SKU: O-IP3040EU
    €59.90
    inc. VAT

     72HR STOCK
  • Ripmax Sigma EQ Touch AC/DC Charger (90W) Euro

    Ripmax Sigma EQ Touch AC/DC Charger (90W) Euro

    This high-performance, balance charger features the very latest ‘touch’ sensitive LCD screen for simple and logical programming. It is perfect for charging and discharging Li-Po, Li-Ion, Li-Fe, Ni-MH, Nicad and Lead Acid batteries. With a useful total charge current of up to 10A and a maximum limit of 90W total charge power, the Sigma EQ Touch will cater for a wide variety of battery types and ‘C’ ratings. The LCD screen provides graphical display of the charge/discharge process to help understand the condition of the pack and each cell in it (Lithium only with balance connector). There is a function for long term storage to help optimise your Lithium type batteries and prolong their life. Additional features such as an internal independent balancer and a digital power output make this a versatile charger. Input power can be 11~18v DC or 100~240v AC, so perfect for use at the field or at home. This euro version is supplied with a european style mains plug.

    Supplied with a universal balance board (XH,TP,EH and PQ), a DC input lead with removable crocodile clips and a ‘T’ type main battery connection lead as standard. Other leads are available from your local shop to suit different applications. An optional temperature sensor is also available.

    Specifications:
    • Input Voltage:    10 - 18V DC or 110 - 240V AC
    • Max Charge Power:    Max 90 Watts
    • Weight:    520g (18.3oz)
    • Dimensions:    146 x 148 x 58mm
    • LiPo:    1 - 6 cells
    • NiCad/Ni-MH:    1 - 16 cells
    SKU: O-IP3055/EUR
    €99.90
    inc. VAT

     72HR STOCK
  • Robbe 60-90 fin Horizontal

    Robbe 60-90 fin Horizontal

    Robbe 60-90 fin Horizontal

    SKU: RCMC-004
    €25.00
    inc. VAT

     IN STOCK
  • Robbe Lipo-Accu 3,7V 600mAh 20c

    Robbe Lipo-Accu 3,7V 600mAh 20c

    Robbe Lipo-Accu 3,7V 600mAh 20c
    SKU: S2540032
    €10.90
    inc. VAT

     72HR STOCK
  • Robbe Millenium Carbon Frame set

    Robbe Millenium Carbon Frame set

    100% Carbon, Suits Robbe Millenium 2 and 3 . Set including 6 pieces, Made from Glossy high quality carbon

    SKU: RCMC-016
    €79.00 €121.00
    inc. VAT

     IN STOCK
  • Robbe One-Piece Motor Mount

    Robbe One-Piece Motor Mount

    One-Piece Motor Mount, CNC machined from a solid Aluminum block. A super rigid design, with a strategically positioned cross member, makes it best suited to handle the power of the latest big bore heli engines.
    This new ultra-light mount is one ounce lighter then the Millennium ii-III/ Nova Cuatro 3-piece mount and it even maintains a weight advantage over the Millennium II 2-piece mount. A direct replacement for the stock mounts, it is designed to fit the earlier style larger capacity tank in the Millennium.
    In the Futura Nova it requires the more recent style fuel tank. Compatible with all 60-120 motors.
    Made to fit the Millennium I, II and III, the Futura Nova and the Cuatro. Clear/Silver anodized finish.

    SKU: SKU6387
    €48.00
    inc. VAT

     IN STOCK
  • Robbe Special Bearing Oil

    Robbe Special Bearing Oil

    Special Bearing Oil

    A must to use with Ball Bearings and any metal part in friction
    Absolutely essential for model helicopters and cars, also for all other applications

    SKU: Robbe5531
    €15.90
    inc. VAT

  • Sbach 342 ARF

    Sbach 342 ARF

    Developed by Philipp Steinbach the Sbach 342 is a purebred carbon-fiber plane.
    It can be found in it just a few metal parts.
    The engine is a Lycoming AEIO-580-B1A with 315 hp.
    The six-cylinder engine drives an adjustable composite propeller with 203 cm diameter.
    It brings the empty Sbach 342 to 655 kg.
    Compared to the other two-seaters on the market it weighs 60 to 140 kg less. With 7,75 m Length and 6,67 m Wingspan and it is also the smallest of its kind.
    The maximum takeoff weight is 999 kg.

    The model:

    Fuselage, main wing and tail are made from the lightweight and strong material HypoDur®.
    All parts are already painted and decorated in the shown design.
    The brushless direct drive is powered by a 4s LiPo battery and gives the model a most powerful flight performance.
    Even under windy weather conditions the model is easy to control.
    Via the removable canopy, the LiPo battery can be changed easily, when you are out on the airfield. The ailerons are linked by a separate servo on each side.
    As a special feature, the elevators are also linked by two separate servos.
    All RC parts are installed ready to fly in the Sbach 342.
    The main wings are supported by a massive carbon bar, which leads the forces into the wing.
    The Sbach 342 is supplied as ARF version and contains the model with five servos installed. Furthermore the brushless motor and the ESC are installed ready to fly in the fuselage.
    Already on the ground the Sbach 342 impresses by its outstanding design and size.
    Once airborne, the Sbach 342 shows its full potential! Rolls, loops, snap maneuvers - this model is a true aerobatic maniac! No matter, if your are an intermediate pilot or an aerobatic professional - the Sbach 342 is your perfect choice for unlimited flying fun!
    So this is your next ultimate eyecatcher on your airfield...!

    Features:

    • Scale replica of the famous aerobatic airplane
    • High power 4s brushless drive train
    • Carbon tube for wing halfs Fuselage, main wing and tail are made of HypoDur®
    • Ailerons and elevators are designed as gapless elastoflaps
    • High level of prefabrication for shortest assembly time
    • Outstanding aerobatic flight performance
    • Easy to operate on the ground and in the air
    • Carbon bars in main wing

    Delivery:

    • Foamed parts for fuselage
    • Main wing and tail made of HypoDur®
    • Brushless motor
    • Brushless ESC
    • 5 micro servos
    • Spinner Propeller Wheelpants
    Specifications:

    • Wingspan: 1.395 mm
    • Length: 1.290 mm
    • Weight approx.: 1.990 g
    • Motor: Brushless
    • Battery: LiPo 4s 14,8V
    • Radio: 4 channels
    SKU: 027-1050
    €249.00
    inc. VAT

     72HR STOCK
  • Scorpion Lock Strap XL

    Scorpion Lock Strap XL

    The new Scorpion Lock Straps feature a revolutionary non-slip coating on the inside surface that securely locks your battery in place and prevents them from shifting, even during the most radical 3D aerobatic maneuvers. These large size straps are perfect for 500 to 700 class electric helicopters or larger RC Aircraft. The large size strap measures 1 inch wide by 12.5 inches long (25mm x 315mm), so they will fit around a 6-cell 5000mah battery pack. The straps feature a tough plastic buckle and a strong Velcro closure for maximum holding power and security. Each package contains 3 Scorpion Lock Straps.

    SKU: LOCKSTRAP
    €7.00
    inc. VAT

     IN STOCK
  • Screw Allen Countersunk M3x6 (10)

    Screw Allen Countersunk M3x6 (10)

    Screw Allen Countersunk M3x6 (10)

    Material: SS 302-316/Steel.

    10PCS in a bag

    SKU: SFHM3x6
    €3.50
    inc. VAT

     IN STOCK
  • Screw Allen Countersunk M3x8 (10)

    Screw Allen Countersunk M3x8 (10)

    Screw Allen Countersunk M3x8 (10)

    Material: SS 302-316/Steel.

    10PCS in a bag

    SKU: SFHM3x8
    €3.50
    inc. VAT

     72HR STOCK
  • Screw DIN 7991 A2 UNF10-32 x 1.5"

    Screw DIN 7991 A2 UNF10-32 x 1.5"

    Countersunk socket head cap screws stainless steel Screw DIN 7991 A2 UNF 10-32 x 1.5"
    Set of 2

    SKU: CS1032X1.51
    €3.00
    inc. VAT

     IN STOCK
  • Screw DIN 912 A2 UNF 10-32 x 1.25"

    Screw DIN 912 A2 UNF 10-32 x 1.25"

    Hexagon socket head cap screws stainless steel A2 DIN 912 UNF 10-32 x 1.25
    Set of 2

    SKU: 1032X1.25
    €3.00
    inc. VAT

     IN STOCK
  • Screw DIN 912 A2 UNF 10-32 x 1.5"

    Screw DIN 912 A2 UNF 10-32 x 1.5"

    Hexagon socket head cap screws stainless steel A2 DIN 912 UNF 10-32 x 1.5"
    Set of 2

    SKU: 1032X1.5
    €3.00
    inc. VAT

     IN STOCK
  • Screw ISO 7380 A2 UNF 10-32 x 1.5"

    Screw ISO 7380 A2 UNF 10-32 x 1.5"

    Hexagon socket head cap screws stainless steel Screw ISO 7380 A2 UNF 10-32 x 1.5"
    Set of 2

    SKU: HC1032X1.5
    €3.00
    inc. VAT

     IN STOCK
  • Screws set for Glow Helis

    Screws set for Glow Helis

    Per request of our customers, we prepared this package which is very attractive ( 40-45% discount ) if purchased separately.
    This is a first aid set or maintenance set for Most Nitro/Benzin helis 30-90 size .

    Included

    Screws : M3X 10( 10pcs) , M3 X 25( 10 pcs) , M3X 50(5 pcs) , M3X 60( 5pcs)
    M3X3 HEADLESS( 20 pcs), M4 X4 (10 pcs) , M4X 40 (4pcs)
    s4029 Bearing shims 3mm(5), Ball head ( 5pcs)
    Nylock M3 ( 10pcs), Nylock M4 (10 pcs)

    SKU: RCM19062
    €19.50 €30.00
    inc. VAT

     LOW STOCK
  • Selectable Volt Monitor

    Selectable Volt Monitor

    a MUST, Peace-of-mind for pilots With 7 LEDs providing instant, accurate receiver battery voltage status, the VoltWatch is a super accessory for any modeler.
    Pilots simply mount the VoltWatch anywhere the 7 tiny status lights can be seen Selectable switch to choose 4.8 or 6.0v.
    Very lightweight unit can be mounted on the side of the fuselage
    Draws amazingly low current less than 10mA
    Plugs into any open receiver channel
    SKU: SKU14257
    €7.00
    inc. VAT

     IN STOCK
  • Self Healing Cutting Mat A0 1200x900mm (Green)

    Self Healing Cutting Mat A0 1200x900mm (Green)

    Self Healing Cutting Mat A0 1200x900mm (Green), DOUBLE SIDED 3mm with 5-lay construction
    Perfect working underlay for cutting of foils, balsa, decal sheets and so on. Imprinted Length-,Wide- and Angle Screen.

    The Self-Healing-Effect operates that fine cuttings in the surface area will be closed by itself.

    Size 1200 x 900 x 3mm

    SKU: HO17505
    €74.90
    inc. VAT

     72HR STOCK
  • Self Healing Cutting Mat A1 600x90mm (Green)

    Self Healing Cutting Mat A1 600x90mm (Green)

    Self Healing Cutting Mat A1 600x90mm (Green), A1 size, DOUBLE SIDED 3mm with 5-lay construction
    Perfect working underlay for cutting of foils, balsa, decal sheets and so on. Imprinted Length-,Wide- and Angle Screen.

    The Self-Healing-Effect operates that fine cuttings in the surface area will be closed by itself.

    Size 600 x 900 x 3mm

    SKU: HO17504
    €31.90
    inc. VAT

     72HR STOCK
  • Self Healing Cutting Mat A1 600x90mm (Translucent)

    Self Healing Cutting Mat A1 600x90mm (Translucent)

    Self Healing Cutting Mat A1 600x90mm (Translucent), DOUBLE SIDED 3mm with 5-lay construction
    Perfect working underlay for cutting of foils, balsa, decal sheets and so on. Imprinted Length-,Wide- and Angle Screen.

    The Self-Healing-Effect operates that fine cuttings in the surface area will be closed by itself.

    Size 600 x 900 x 3mm

    SKU: HO17514
    €34.90
    inc. VAT

     72HR STOCK
  • Self Healing Cutting Mat A2 450x600mm (Green)

    Self Healing Cutting Mat A2 450x600mm (Green)

    Self Healing Cutting Mat A2 450x600mm, A2 size, DOUBLE SIDED 3mm with 5-lay construction
    Perfect working underlay for cutting of foils, balsa, decal sheets and so on. Imprinted Length-,Wide- and Angle Screen.

    The Self-Healing-Effect operates that fine cuttings in the surface area will be closed by itself.

    Size 450 x 600 x 3mm

    SKU: HO17503
    €17.00
    inc. VAT

  • Self Healing Cutting Mat A2 450x600mm (Tranlucent)

    Self Healing Cutting Mat A2 450x600mm (Tranlucent)

    Self Healing Cutting Mat A2 450x600mm (Tranlucent), DOUBLE SIDED 3mm with 5-lay construction
    Perfect working underlay for cutting of foils, balsa, decal sheets and so on. Imprinted Length-,Wide- and Angle Screen.

    The Self-Healing-Effect operates that fine cuttings in the surface area will be closed by itself.

    Size 450 x 600 x 3mm

    SKU: HO17513
    €18.90
    inc. VAT

     72HR STOCK

Manufacturers